McMaster-Carr logo
    Forward
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Print
    How can we improve?
    Comments
    E-mail address (if you would like a response)
    29 Products

    Adjustable Gantry Cranes

    Image of Product. Painted Steel. Front orientation. Contains Annotated. Painted Steel. Adjustable Gantry Cranes .

    Painted Steel

    Adjust the vertical clearance to suit your needs. Cranes can be rolled into your work area for infrequent lifts and then rolled away to free up space.
    Warning: Never use to lift people or items over people.
    Painted Steel—Painted steel cranes are not designed for prolonged use outdoors.
    Steel Wheel—Cranes with steel wheels have legs that pivot for maneuverability in tight places.
    Overall
    Beam
    Wheel
    Wt. Cap.
    Clearance,
    ft.
    Clearance Adjustment
    Increments
    Lg.
    Wd.
    Ht.
    Wd.
    Ht.
    Type
    Wheel
    Configuration
    Brake Type
    Dia.
    Material
    Specs. Met
    Each
    Yellow Painted Steel
     
    6 ft. to 9 1/2 ft. Span
    3 ton, 6,000 lb.7 to 1012"138"66"94" to 130"4 5/8"10"OpenFour Swivel CastersWithout Brake8"SteelCMAA Specification No. 70, OSHA Compliant 29 CFR 1910.1793110T44000000000
     
    8 ft. to 9 1/2 ft. Span
    3 ton, 6,000 lb.9 to 1412"138"90"118" to 174"4 5/8"10"OpenFour Swivel CastersWithout Brake8"SteelCMAA Specification No. 70, OSHA Compliant 29 CFR 1910.1793110T4600000000
     
    Replacement Casters for Cranes with Steel Wheels
    Image of Product. Front orientation. Steel Wheel. Adjustable Gantry Cranes .

    Replacement

    Casters for

    Cranes with Steel

    Wheels

    Wheel
    For Wt. Cap.,
    ton
    Brake Type
    Dia.
    Material
    Each
    2, 3Wheel Brake and Swivel Lock (Total Lock)8"Steel3110T1930000000
    2, 3Without Brake8"Steel3110T191000000

    Forklift Booms

    Image of ProductInUse. Shown Installed on Forklift. Front orientation. Forklift Booms. Forklift Booms.

    Shown Installed on Forklift

    Slide these booms onto forklift forks to handle long, cumbersome loads. They secure to the forklift carriage with the included safety chains. These booms are labeled with capacity for each hook position. First hook position is measured from the fork pocket end.
    Note: Capacities are approximate and depend on the type and load capabilities of the forklift used. Check with the manufacturer of your forklift for load capabilities before using.
    Warning: Never use to lift people or items over people.
    Forklift Booms
    Image of Product. Style B. Front orientation. Style B. Forklift Booms.
    Image of Product. Style D. Front orientation. Contains Annotated, Inset. Style D. Forklift Booms.

    Style B

    Style D

    Horizontally Telescoping—Horizontally telescoping booms extend and retract lengthwise to handle extra-long loads and reach into hard-to-access areas.
    Vertically-Adjustable Boom—Those that also adjust vertically move in and out and up and down for the most flexible load placement. To access tall loads, raise the hook position and lock the boom into place with the pin.
    Wt. Cap., lb.
    For
    Max. Fork
    Hook
    Style
    @ 3
    ft.
    @ 4
    ft.
    @ 5
    ft.
    @ 6
    ft.
    @ 7
    ft.
    @ 8
    ft.
    @ 9
    ft.
    @ 10
    ft.
    @ 11
    ft.
    @ 12
    ft.
    Fork Pocket Spacing
    Ctr.-to-Ctr.
    For Min.
    Fork Lg.
    Wd.
    Ht.
    Material
    Type
    Movement
    Opening
    Wd.
    First Hook
    Position, ft.
    Lg., ft.
    Each
    Horizontally Telescoping
    B6,0005,0004,5004,0003,5003,0002,6002,3002,0001,80024"24"7 1/4"2 1/4"Painted SteelLatching
    Latching    		Swivel
    Swivel    		1"
    1"    		37 1/2 to 12 1/23638T113000000000
    B8,0006,6006,0005,3004,6004,0003,5003,0002,6002,20024"24"7 1/4"2 1/4"Painted SteelLatching
    Latching    		Swivel
    Swivel    		1"
    1 1/4"    		37 to 12 1/23638T11400000000
     
    Horizontally Telescoping, Vertically Adjustable (37° Maximum Lifting Angle)
    D6,0005,0004,5004,0003,5003,0002,6002,3002,0001,80024"24"7 1/4"2 1/4"Painted SteelLatching
    Latching    		Swivel
    Swivel    		1"
    1"    		37 1/2 to 12 1/23638T11700000000
    D8,0006,6006,0005,3004,6004,0003,5003,0002,6002,20024"24"7 1/4"2 1/4"Painted SteelLatching
    Latching    		Swivel
    Swivel    		1"
    1 1/4"    		37 to 12 1/23638T11800000000
     
    Replacements for Forklift Booms
    Replacement Safety-Pin Shackles
    Image of Product. Front orientation. Contains Annotated. Shackles.
    A bolt fastened with a nut and cotter pin makes these shackles more secure than screw-pin shackles. Also known as anchor and bow shackles, the wide body provides room to attach multiple connectors.
    Note: Capacities listed are for vertical lifting only. As the lift angle changes from vertical, the amount of weight the shackle can lift is significantly reduced.
    Galvanized Steel—Galvanized steel shackles have a thick coating for corrosion resistance.
    Wt. Cap.,
    lb.
    Thk.
    Pin
    Dia.
    Opening
    Wd.
    Inside
    Lg.
    Inside
    Wd.
    Specs. Met
    Mil. Spec.
    Each
    Galvanized Steel
    4,4001/2"21/32"13/16"1 29/32"1 5/16"ASME B30.26Fed. Spec. RR-C-2713555T51000000
    7,1005/8"25/32"1 1/16"2 13/32"1 23/32"ASME B30.26Fed. Spec. RR-C-2713555T5200000
    10,4003/4"29/32"1 1/4"2 13/16"2"ASME B30.26Fed. Spec. RR-C-2713555T5300000
     
    Replacement Hooks with Swivel
    Image of Product. Front orientation. Hooks.
    Rotating for easy positioning before a load is applied, these have a latch to ensure that rope, chain, and fittings won't separate from the hook when the load slackens. The hook opening accommodates large anchor points and allows chain to move freely through the closed hook.
    Note: Capacities are for vertical lifting only.
    Hook
    Eye
    Wt. Cap.,
    lb.
    Opening
    Wd.
    Usable
    Lg.
    ID
    Thk.
    Specs. Met
    For Use With
    Each
    4,4001 1/16"6 1/8"1 3/4"5/8"ASME B30.10Chain, Wire Rope3525T6130000000
    6,6001 3/16"6 1/2"1 3/4"5/8"ASME B30.10Chain, Wire Rope3525T614000000
    11,0001 1/2"7 1/2"2"3/4"ASME B30.10Chain, Wire Rope3525T615000000
    Replacement Latch Kits for Hooks
    Image of Product. Front orientation. Exploded view. Hook Latches. Forklift Booms.
    Includes
    Each
    Latch, Spring, Nut and Bolt35315T43000000
    Latch, Spring, Nut and Bolt35315T4400000
    Latch, Spring, Nut and Bolt35315T4500000
    Forklift Booms—Made in the U.S.
    Image of Product. Style F. Front orientation. Style F. Forklift Booms.
    Image of Product. Style H. Front orientation. Contains Annotated, Inset. Style H. Forklift Booms.

    Style F

    Style H

    Image of Product. Front orientation. Forklift Boom Pin Housings.
    Image of Product. Front orientation. Clevis Pins. Forklift Booms.

    Replacement Pin

    Housing Rebuild

    Kits

    Replacement Pull Pins

    Booms that are made in the U.S. have a label that confirms they are manufactured in the United States.
    Horizontally Telescoping—Horizontally telescoping booms extend and retract lengthwise to handle extra-long loads and reach into hard-to-access areas.
    Vertically-Adjustable Boom—Those that also adjust vertically move in and out and up and down for the most flexible load placement. To access tall loads, raise the hook position and lock the boom into place with the pin.
    Forklift Booms
    Replacement Pin
    Housing Rebuild Kits
    Replacement
    Pull Pins
    Wt. Cap., lb.
    For
    Max. Fork
    Hook
    Style
    @ 3
    ft.
    @ 4
    ft.
    @ 5
    ft.
    @ 6
    ft.
    @ 7
    ft.
    @ 8
    ft.
    @ 9
    ft.
    @ 10
    ft.
    @ 11
    ft.
    @ 12
    ft.
    Fork Pocket Spacing
    Ctr.-to-Ctr.
    For Min.
    Fork Lg.
    Wd.
    Ht.
    Material
    Type
    Movement
    Opening
    Wd.
    First Hook
    Position, ft.
    Lg.,
    ft.
    Each
    Each
    Each
    Horizontally Telescoping
    F6,0006,0006,0006,0005,0004,2003,5003,0002,7002,50015"30"7 1/2"2 1/2"Painted SteelLatchingSwivel1 5/16"37 to 123638T270000000003638T420000000———0
     
    Horizontally Telescoping, Vertically Adjustable (40° Maximum Lifting Angle)
    H6,0006,0006,0006,0005,0004,2003,5003,0002,7002,50015"30"7 1/2"2 1/2"Painted SteelLatchingSwivel1 5/16"37 to 123638T32000000003638T420000003638T430000000
     
    Replacements for Forklift Booms
    Replacement Safety-Pin Shackles
    Image of Product. Front orientation. Contains Annotated. Shackles.
    A bolt fastened with a nut and cotter pin makes these shackles more secure than screw-pin shackles. Also known as anchor and bow shackles, the wide body provides room to attach multiple connectors.
    Note: Capacities listed are for vertical lifting only. As the lift angle changes from vertical, the amount of weight the shackle can lift is significantly reduced.
    Galvanized Steel—Galvanized steel shackles have a thick coating for corrosion resistance.
    Wt. Cap.,
    lb.
    Thk.
    Pin
    Dia.
    Opening
    Wd.
    Inside
    Lg.
    Inside
    Wd.
    Specs. Met
    Mil. Spec.
    Each
    Galvanized Steel
    7,1005/8"25/32"1 1/16"2 13/32"1 23/32"ASME B30.26Fed. Spec. RR-C-2713555T52000000
     
    Replacement Hooks with Swivel
    Image of Product. Front orientation. Hooks.
    Rotating for easy positioning before a load is applied, these have a latch to ensure that rope, chain, and fittings won't separate from the hook when the load slackens. The hook opening accommodates large anchor points and allows chain to move freely through the closed hook.
    Note: Capacities are for vertical lifting only.
    Hook
    Eye
    Wt. Cap.,
    lb.
    Opening
    Wd.
    Usable
    Lg.
    ID
    Thk.
    Specs. Met
    For Use With
    Each
    6,6001 3/16"6 1/2"1 3/4"5/8"ASME B30.10Chain, Wire Rope3525T6140000000
    Replacement Latch Kits for Hooks
    Image of Product. Front orientation. Exploded view. Hook Latches. Forklift Booms.
    Includes
    Each
    Latch, Spring, Nut and Bolt35315T44000000

    Battery-Powered Forklift Booms

    Image of Product. Front orientation. Forklift Booms. Battery-Powered Forklift Booms .
    No more manually tugging and shoving your boom into position—just push a button and the battery-powered hydraulic pump precisely extends and retracts these booms for you. For loads up to 2,000 lbs., you can even move these booms with your load suspended from them. For heavier loads, you’ll need to position them first and then attach your load, but it’s still faster and more precise than manual booms. Operate these booms from a safe distance using the pendant switch.
    Note: Capacities are approximate and depend on the type and load capabilities of the forklift used. A forklift with an 8,000 lb. rating is required. Check with the manufacturer of your forklift for load capabilities before using.
    Warning: Never use to lift people or items over people.
    Horizontally-Telescoping Boom
    Image of Product. Back orientation. Horizontally-Telescoping Boom. Battery-Powered Forklift Booms , Pendant Switch on 8-ft. Cord.

    Pendant Switch on 8-ft. Cord

    Wt. Cap., lb.
    For
    Max. Fork
    Hook
    @ 3
    ft.
    @ 4
    ft.
    @ 5
    ft.
    @ 6
    ft.
    @ 7
    ft.
    @ 8
    ft.
    @ 9
    ft.
    @ 10
    ft.
    @ 11
    ft.
    @ 12
    ft.
    Cap. while Adjusting
    Lg., lb.
    Fork Pocket Spacing
    Ctr.-to-Ctr.
    For Min.
    Fork Lg.
    Wd.
    Ht.
    Material
    Type
    Movement
    Opening
    Wd.
    First Hook
    Position, ft.
    Lg.,
    ft.
    Batteries
    Included
    Battery Charger
    Included
    Each
    Pendant Switch on 8-ft. Cord
    8,0006,6006,0005,3004,6004,0003,5003,0002,6002,2002,00024"24"7 1/4"2 1/4"Painted SteelLatchingSwivel1", 1 1/4"37 to 12YesYes8749N11000000000
     

    Beam Trolleys

    Image of Product. Top/Bottom Mount. Front orientation. Trolleys. Beam Trolleys, Top/Bottom Mount.

    Top/Bottom Mount

    Also known as end trucks, use these trolleys with your own beams to create a crane. For example, use two trolleys to allow a beam to move along two structural beams. Bumpers on the trolley body protect the wheels.
    Warning: Never use to lift people or items over people.
    Top/Bottom Mount—Top/bottom-mount trolleys allow you to run your moving beam along either the top or bottom of your fixed beams.
    Trolleys
    Replacement
    Wheels
    For
    Fixed Beam
    For
    Moving Beam
    Wt. Cap.
    Wd.
    Ht.
    Wd.
    Ht.
    Overall
    Lg.
    Material
    Wheel
    Material
    Fasteners
    Included
    Features
    Pair
    Each
    Top/Bottom Mount
    3 ton/6,000 lb.3 1/2" to 5 1/4"6" to 12"3 1/2" to 6"6" to 18"50"SteelIronYesBumpers3247T810000000003269T801000000
     

    Steel Lifting Beams

    Keep long and unbalanced loads stable where overhead space is limited. Unlike spreader beams, which require a chain sling to operate, these beams use a single attachment point to hook onto your crane, hoist, or other lifting device. However, using one attachment point instead of two can cause uneven weight distribution and place more stress on the beam. Capacity is marked on the beam.
    Warning: Never use to lift people or items over people.
    Beams with Latching Hooks
    Image of Product. Front orientation. Contains Annotated, Inset. Lifting Beams. Steel Lifting Beams, Beams with Latching Hooks.
    Beams with latching hooks screw through openings in the bottom of the beam at specific points to adjust the spread. The hooks swivel for easy positioning before a load is applied.
    Lifting
    Eye
    Overall
    Hook
    Wt. Cap.,
    lb.
    Spread
    Lg.
    Wd.
    Lg.
    Ht.
    Movement
    Opening
    Wd.
    Usable
    Lg.
    No. of
    Positions
    Ctr.-to-Ctr.
    Adjustments
    Specs. Met
    Each
    Yellow Painted Steel
    6,00024" to 36"5"3"39"15 1/4"Swivel1"6 1/8"212"ASME B30.203657T323000000000
    6,00036" to 48"5"3"51"15 1/4"Swivel1"6 1/8"212"ASME B30.203657T32400000000
    6,00048" to 72"5"3"75"16 1/4"Swivel1"6 1/8"312"ASME B30.203657T32500000000
    6,00072" to 96"5"3"99"17 1/4"Swivel1"6 1/8"312"ASME B30.203657T32600000000
    6,00096" to 120"5"3"123"18 1/4"Swivel1"6 1/8"312"ASME B30.203657T32700000000
     
    back to top