Filter by
For Use With
Maximum Rotation Speed
Overall Length
Manufacturer Model Number
Weight
DFARS Specialty Metals
Export Control Classification Number (ECCN)
Rotation Speed
Portable Vertical Grinders for Wheels
 |
 |  |  |
For Straight-Cup Grinding Wheel | For Flared Cup Grinding Wheel | For Raised Hub Grinding Wheel |
For Grinding Wheel | Inlet | Speed Control | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Shape | Designation | For Wheel Dia. | Max. Rotation Speed, rpm | Power, hp | For Arbor Hole Thread Size | Airflow @ Pressure | Exhaust Location | Thread Type | Pipe Size | For Hose ID | Type | Switch Type | Overall Lg. | Wt., lb. | Each | ||
| Straight Cup Flared Cup | Type 6 Type 11 | 6" | 6,000 | 5 | 5/8"-11 | 53.5 ft³/min @ 90 psi | Side | NPT | 1/2 | 1/2" | Fixed | Lever | 8 3/4" | 12 1/4 | 4761N12 | 000000000 | |
| Raised Hub | Type 27 | 7" | 8,000 | 5 | 5/8"-11 | 53.5 ft³/min @ 90 psi | Side | NPT | 1/2 | 1/2" | Fixed | Lever | 8 3/8" | 11 1/4 | 4761N11 | 00000000 | |
Electric Angle Grinders for Grinding Wheels and Sanding Discs
DeWalt
 |
For Wheel Dia. | Max. Rotation Speed, rpm | For Arbor Hole Thread Size | Voltage, V AC | Current, amp | Switch Type | Speed Control Type | Overall Lg. | Wt., lb. | Certification | Mfr. Model No. | Each | ||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 4 1/2" | 11,000 | 5/8"-11 | 120 | 11 | Paddle | Fixed | 12" | 4.625 | UL Listed, CSA Certified | DWE402 | 8705A19 | 0000000 | |
| 4 1/2" | 11,000 | 5/8"-11 | 120 | 11 | Slide | Fixed | 12" | 4.625 | UL Listed, CSA Certified | DWE4214 | 8705A64 | 000000 | |
| 5" | 11,000 | 5/8"-11 | 120 | 12 | Trigger | — | 14" | 7.5 | UL Listed, CSA Certified | DW831 | 8705A65 | 000000 | |
| 6" | 9,000 | 5/8"-11 | 120 | 13 | Paddle | Fixed | 13" | 6.25 | UL Listed, CSA Certified | DWE43144N | 8705A88 | 000000 | |
| 7" | 8,500 | 5/8"-11 | 120 | 15 | Trigger | Fixed | 19 1/4" | 12.125 | UL Listed, CSA Certified | DWE4517 | 4395A19 | 000000 | |
| 9" | 6,500 | 5/8"-11 | 120 | 15 | Trigger | Fixed | 19 1/4" | 12.125 | UL Listed, CSA Certified | DWE4519 | 4395A18 | 000000 |
Makita
|
Cannot Be Sold To—Angle Grinders cannot be sold to the listed areas due to product regulations.
Speed Control | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Wheel Dia. | Max. Rotation Speed, rpm | For Arbor Hole Thread Size | Voltage | Current, amp | Switch Type | Type | Switch Type | Overall Lg. | Wt., lb. | Certification | Mfr. Model No. | Cannot Be Sold To | Each | ||
| 4" | 11,000 | M10 × 1.25 mm | 120V AC | 6 | Slide | Fixed | — | 10 1/2" | 3.125 | UL Listed | GA4030K | Outside United States | 8721A21 | 000000 | |
| 4 1/2" | 10,500 | 5/8"-11 | 120V AC | 12 | Slide | Variable | Dial | 11 3/4" | 5.25 | UL Listed | 9564CV | Outside United States | 8721A62 | 000000 | |
| 4 1/2" | 11,000 | 5/8"-11 | 120V AC, 120V DC | 7.5 | Paddle | Fixed | — | 10 5/8" | 3.5 | UL Listed | 9557PB | Outside United States | 8721A31 | 000000 | |
| 5" | 11,500 | 5/8"-11 | 120V AC | 15 | Paddle | Variable | — | 12 7/8" | 5.7 | UL Listed | GA5095 | Outside United States | 8721A65 | 000000 | |
Milwaukee
|
Milwaukee grinders have a spindle lock for fast wheel changes.
OSHA Compliant 29 CFR 1910.215 and OSHA Compliant 29 CFR 1926.303—Grinders that meet OSHA 29 CFR 1910.215 and OSHA 29 CFR 1926.303 are compliant with standards for abrasive wheels.
OSHA Compliant 29 CFR 1910.243—Grinders that meet OSHA 29 CFR 1910.243 are compliant with standards for hand-held equipment.
For Wheel Dia. | Max. Rotation Speed, rpm | For Arbor Hole Thread Size | Voltage, V AC | Current, amp | Switch Type | Speed Control Type | Overall Lg. | Wt., lb. | Specs. Met | Certification | Mfr. Model No. | Each | ||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 4 1/2" | 12,000 | 5/8"-11 | 120 | 11 | Paddle | Fixed | 14" | 5.5 | OSHA Compliant 29 CFR 1910.215, OSHA Compliant 29 CFR 1910.243, OSHA Compliant 29 CFR 1926.303 | UL Listed, C-UL Listed, CSA Certified | 6142-31 | 46225A24 | 0000000 | |
| 5" | 11,500 | 5/8"-11 | 120 | 13 | Paddle | Fixed | 12 1/4" | 5.75 | OSHA Compliant 29 CFR 1910.215, OSHA Compliant 29 CFR 1910.243, OSHA Compliant 29 CFR 1926.303 | UL Listed, C-UL Listed, CSA Certified | 6117-30 | 46225A72 | 000000 | |
| 7", 9" | 6,500 | 5/8"-11 | 120 | 15 | Trigger | Fixed | 21" | 13.75 | OSHA Compliant 29 CFR 1910.215, OSHA Compliant 29 CFR 1910.243, OSHA Compliant 29 CFR 1926.303 | UL Listed, C-UL Listed, CSA Certified | 6088-30 | 46305A14 | 000000 |
Medium Duty Air-Powered Angle Grinders for Grinding Wheels and Sanding Discs
 |
More durable than our Light Duty Grinders, these are designed for more frequent use.
Grinders have an angled head for accessing hard-to-reach places and a threaded spindle. They have a lever lock to prevent accidental start-up.
Caution: Use only accessories that have a greater rpm rating than the maximum speed of the grinder you choose.
Inlet | Speed Control | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Wheel Dia. | Max. Rotation Speed, rpm | Power, hp | For Arbor Hole Thread Size | Airflow @ Pressure | Exhaust Location | Thread Type | Pipe Size | For Hose ID | Type | Switch Type | Overall Lg. | Wt., lb. | Each | ||
| 2" | 12,000 | 2/5 | 1/4"-20 | 3 ft³/min @ 90 psi | Back | NPT | 1/4 | 3/8" | Variable | Lever | 6" | 1.25 | 43605A25 | 0000000 | |
| 4" | 11,000 | 3/4 | 3/8"-24 | 12 ft³/min @ 90 psi | Front | NPT | 1/4 | 3/8" | Variable | Lever | 9" | 4 | 43605A21 | 000000 | |
| 4 1/2" | 12,000 | 4/5 | 5/8"-11 | 14 ft³/min @ 90 psi | Back | NPT | 1/4 | 3/8" | Variable | Lever | 9" | 4.25 | 43605A24 | 000000 | |
| 7" | 4,500 | 1 | 5/8"-11 | 12 ft³/min @ 90 psi | Front | NPT | 1/4 | 3/8" | Variable | Lever | 12" | 5.75 | 43605A22 | 000000 | |
Light Duty Air-Powered Angle Grinders for Grinding Wheels and Sanding Discs
|
Use these grinders for light, intermittent grinding and sanding.
Grinders have an angled head for accessing hard-to-reach places and a threaded spindle. They have a lever lock to prevent accidental start-up.
Caution: Use only accessories that have a greater rpm rating than the maximum speed of the grinder you choose.
Inlet | Speed Control | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Wheel Dia. | Max. Rotation Speed, rpm | Power, hp | For Arbor Hole Thread Size | Airflow @ Pressure | Exhaust Location | Thread Type | Pipe Size | For Hose ID | Type | Switch Type | Overall Lg. | Wt., lb. | Each | ||
| 4" | 11,000 | 3/4 | 3/8"-24 | 6 ft³/min @ 90 psi | Front | NPT | 1/4 | 3/8" | Variable | Lever | 9" | 4 | 43605A23 | 0000000 | |
Air-Powered Wire Bristle Blasters
 |  |
Shown in Use |
Connect these blasters to an air source to remove contaminants from metal surfaces without the mess of abrasive media. They strip corrosion, coatings, mill scale, and other contaminants without removing underlying surface material. A rotating belt of wire bristles snaps against the surface to mimic the impact of blasting media. The impact of the bristles creates the same textured finish as blasting media for coating and sealant adhesion. Because they don’t use abrasive media, the only leftover material is the removed debris. This reduces cleanup time and keeps the surrounding air cleaner.
Since they clean only what they touch, these blasters work more slowly than abrasive blasters that sweep large areas. Use them for small- to medium-sized tasks such as cleaning weld seams and prepping parts for coatings.
Hazardous Location Rating—These blasters are approved for use in locations where ignitable gases may be present, such as chemical plants and refineries.
Overall | Hazardous Location | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Lg. | Wd. | Ht. | Wt., lb. | Max. No-Load Rotational Speed, rpm | Blasting Time per Load, min. | Blast Area Coverage per Hour, ft² | Required Air Pressure (For Belt Wd.) | Average Air Consumption, ft³/min | Rating | Protection Type | Container Type | Includes | Each | ||
| 13 3/4" | 2 3/4" | 6 1/4" | 3 | 3,500 | 60 | 15 | 75 psi (7/16") 90 psi (29/32") | 18 | ATEX II 2 G Ex C IIA T4 X, IEC Zone 1 Group IIA | Constructional Safety | — | Steel Accelerator Bar for 7/16" Wd. Bristle Belts Steel Accelerator Bar for 29/32" Wd. Bristle Belts Hub for 7/16" Wd. Bristle Belts Hub for 29/32" Wd. Bristle Belts Dust Hood | 8829N12 | 000000000 | |
| 13 3/4" | 2 3/4" | 6 1/4" | 3 | 3,500 | 60 | 15 | 75 psi (7/16") 90 psi (29/32") | 18 | ATEX II 2 G Ex C IIA T4 X, IEC Zone 1 Group IIA | Constructional Safety | Plastic Case | Five 7/16" Wd. Steel Bristle Belts Five 29/32" Wd. Steel Bristle Belts Steel Accelerator Bar for 7/16" Wd. Bristle Belts Steel Accelerator Bar for 29/32" Wd. Bristle Belts Hub for 7/16" Wd. Bristle Belts Hub for 29/32" Wd. Bristle Belts Pressure Regulator for 7/16" Wd. Bristle Belts, 75 psi Pressure Regulator for 29/32" Wd. Bristle Belts, 90 psi Dust Hood | 8829N11 | 00000000 | |
Electric Wire Bristle Blasters
|  |
Shown in Use |
Strip contaminants from metal surfaces without the mess of abrasive media. These blasters remove corrosion, coatings, and mill scale without removing underlying material. A rotating belt of wire bristles snaps against the surface to mimic the impact of blasting media. The impact of the bristles creates the same textured finish as blasting media for coating and sealant adhesion. Because they don’t use abrasive media, the only leftover material is the removed debris. This reduces cleanup time and keeps the surrounding air cleaner.
Since they clean only what they touch, these blasters work more slowly than abrasive blasters that sweep large areas. Use them for small- to medium-sized tasks such as cleaning weld seams and prepping parts for coatings.
Overall | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Lg. | Wd. | Ht. | Wt., lb. | Max. No-Load Rotational Speed, rpm | Blasting Time per Load, min. | Blast Area Coverage per Hour, ft² | Electrical Connection Type | NEMA Type | Container Type | Includes | Each | ||
| 17" | 4" | 9 1/2" | 7 | 3,200 | 60 | 15 | Plug In | 1-15 | — | Steel Accelerator Bar for 7/16" Wd. Bristle Belts Steel Accelerator Bar for 29/32" Wd. Bristle Belts Hub for 7/16" Wd. Bristle Belts Hub for 29/32" Wd. Bristle Belts Dust Hood | 8835N12 | 000000000 | |
| 17" | 4" | 9 1/2" | 7 | 3,200 | 60 | 15 | Plug In | 1-15 | Plastic Case | Five 7/16" Wd. Steel Bristle Belts Five 29/32" Wd. Steel Bristle Belts Steel Accelerator Bar for 7/16" Wd. Bristle Belts Steel Accelerator Bar for 29/32" Wd. Bristle Belts Hub for 7/16" Wd. Bristle Belts Hub for 29/32" Wd. Bristle Belts Dust Hood | 8835N11 | 00000000 | |
Heavy Duty Air-Powered Angle Grinders for Grinding Wheels and Sanding Discs
 |
Rated for continuous use to take on tough jobs, these grinders have heavy duty gears for smooth operation and long tool life.
Grinders have an angled head for accessing hard-to-reach places and a threaded spindle. They have a lever lock to prevent accidental start-up.
Caution: Use only accessories that have a greater rpm rating than the maximum speed of the grinder you choose.
Inlet | Speed Control | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Wheel Dia. | Max. Rotation Speed, rpm | Power, hp | For Arbor Hole Thread Size | Airflow @ Pressure | Exhaust Location | Thread Type | Pipe Size | For Hose ID | Type | Switch Type | Overall Lg. | Wt., lb. | Each | ||
| 4" | 12,000 | 1 | 3/8"-24 | 17 ft³/min @ 90 psi | Back | NPT | 3/8 | 3/8" | Variable | Lever | 9 1/4" | 3 3/4 | 4435A42 | 0000000 | |
| 4 1/2" | 12,000 | 1 | 5/8"-11 | 17 ft³/min @ 90 psi | Back | NPT | 3/8 | 3/8" | Variable | Lever | 9 1/4" | 3 3/4 | 4435A28 | 000000 | |
Cordless Wire Bristle Blasters
|  |
Shown in Use |
No need for blasting media, power outlets, or compressed air. These blasters clean and texture surfaces wherever they’re needed. They strip corrosion, coatings, mill scale, and other contaminants from metal surfaces without removing underlying surface material. A rotating belt of wire bristles snaps against the surface to mimic the impact of blasting media. The impact of the bristles creates the same textured finish as blasting media for coating and sealant adhesion. However, they spin slower than electric and air-powered blasters, so they can’t remove heavy coatings and rust. Because they don’t use abrasive media, the only leftover material is the removed debris. This reduces cleanup time and keeps the surrounding air cleaner.
Since they clean only what they touch, these blasters work more slowly than abrasive blasters that sweep large areas. Use them for small- to medium-sized tasks such as cleaning weld seams and prepping parts for coatings.
Wire Bristle Blasters | Replacement Batteries | Replacement Chargers | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Overall | |||||||||||||||||
Lg. | Wd. | Ht. | Wt., lb. | Max. No-Load Rotational Speed, rpm | Blasting Time per Load, min. | Blast Area Coverage per Hour, ft² | Battery Charging Time (Battery Cap.) | Batteries Included | Container Type | Includes | Each | Each | Each | ||||
| 21" | 4" | 9 1/2" | 8 | 2,300 | 60 | 15 | 45 min. (8 A·h) | Yes | Plastic Case | Five 29/32" Wd. Steel Bristle Belts Steel Accelerator Bar for 29/32" Wd. Bristle Belts Hub for 29/32" Wd. Bristle Belts Battery Charger Battery, 18V DC Dust Hood | 8832N11 | 000000000 | 8832N12 | 0000000 | 8832N13 | 0000000 | |
Retaining Nuts for Backup Pads
Wire Bristle Blaster Belts
