Often used in metal fabrication and glass manufacturing, these sleeves protect your arms from cuts and heat. They meet ANSI/ISEA 105 standards for various forms of protection, such as cut, abrasion, puncture, and heat resistance.

All have an ANSI cut rating, which reflects the amount of force needed to cut through them with a razor blade.

Protect your arms from the heat and flames of electrical arc flashes. These sleeves are tested to ASTM F2675 for arc-flash protection. Their arc rating measures their ability to protect against burns; the higher the arc rating, the greater the flame resistance. Check the minimum arc rating and PPE category provided for your workplace.

These sleeves also meet ANSI/ISEA 105 standards for cut protection. Rated A5, they are safe to use with cutting blades, knives, and sharp wire.

Snap these sleeves on your forearm to shield from sharp objects and fragments as thin as needles, glass shards, and metal shavings. They meet the ANSI needlestick rating, which rates gloves and sleeves on a scale of 1-5 based on how much force it takes to puncture them with a needle. Higher numbers represent more protection.

These sleeves meet ANSI/ISEA 105 standards for various forms of protection, such as resistance to cuts, abrasion, punctures, and heat. Their ANSI cut rating reflects how much force is needed to cut through them with a razor blade. At A8, they’re safe to use with spikes and bulky objects with sharp edges. They also meet EN 388, a European standard that rates their resistance to abrasion, cuts, tears, punctures, and impact.

Made of interlinked rings, these gloves protect your hands from cuts and puncture wounds. They’re often used for food processing, textile cutting, and sheet metal handling. These gloves meet EN 1082-1, a European standard that measures how well chainmail gloves resist penetration from knives. It’s comparable to ANSI Cut Level A9, which is the highest cut resistance rating for gloves. You can wear these gloves on either hand—just turn them inside out when you need to switch.

Made from stainless steel, these gloves are corrosion-resistant and easy to clean. Each ring is welded fully shut, so there are no gaps that could trap particles, and there are no studs or buckles that could harbor germs. For a snug fit, wrap the adjustment clip around the cuff and slide it into any ring to secure.

Rated to ANSI/ISEA 105 standards for cut protection, these gloves shield hands from sharp tools and materials. All have an ANSI/ISEA 105 cut rating, which reflects the amount of force needed to cut through them with a razor blade.