Lock by screwing the latch into the body.

A lock slides upward over the latch to lock. The latch opens outward to accept large diameters of rope.

The narrow end restricts the movement of rope and chain, and the wide end allows room to attach multiple connectors.

Flat sides allow webbing and strapping to lay flat, so they won't slide and bunch.

Best for attaching different widths of webbing and strapping, the flat sides ensure they lay flat and won't bunch or slide.

Also known as C-links, the notch in these links lets you slip additional links on or remove links quickly.

Smaller than lifting oblong links, these links provide room for snaps, carabiners, and other non-lifting connectors.

Providing better load distribution and alignment than single oblong links, these reduce wear in three and four leg slings.

Also known as master and sling links, a large inner diameter provides room to attach multiple connectors or legs on a sling.

A bolt fastened with a nut and cotter pin makes these shackles more secure than screw-pin shackles.

A bolt fastened with a nut and cotter pin makes these shackles more secure than screw-pin shackles.

The pins have flush ends to prevent snagging and accidental disengagement.

The strongest shackles we offer, these connectors have a pin with flush ends that prevents snagging and accidental disengagement.

Attach a rope to the ring on the pin for remote release where access in limited. These shackes have a clevis end for making pivoting connections.

Disconnect by pulling the lever or attach rope to the eye on the lever for remote release.

Indentations in the shackle body hold the head of the pin in place once fastened.

A lip on the shackle keeps the screw from falling out when loosened.

A lip on the shackle keeps the pin from falling out when loosened.

For use in low-vibration applications where the shackle remains stationary.

These rings mount flush and fold down when not in use to eliminate obstructions.

Dimples hold the base tight to prevent it from swiveling.

Accommodate ties in any direction with these rings that swivel all the way around and pivot 180°.

Adhesive on the back holds these rings in place.

Large holes in the base allow adhesive to flow through.