Modular DIN-Rail Mount Terminal Blocks
Add as many circuits as you need with these terminal blocks and accessories. The terminal blocks clip onto DIN 3 rail and can be removed without disrupting adjacent blocks. Some also clip onto DIN 1 rail. All have screw-clamp terminals for a secure connection, reducing the chance of wire disconnecting due to vibrations, pulls, or snags. Rated UL 94 V-0, all meet flammability standards. Blocks that meet IP10 shield connections from objects larger than your hand; those that meet IP20 protect against objects larger than your fingers.
Blocks with a disconnect tab or knob easily disconnect a circuit without needing to remove installed wire. Use them for testing. End covers fit on the open side of a block to prevent accidental contact with a live circuit.
End stops mount at the end of a group of blocks to keep them in place. Those rated IP20 provide additional protection from objects larger than your fingers.
Jumpers connect circuits between blocks to simplify wiring and leave terminals available to connect equipment. Blocks must be adjacent to each other and the same width. Lateral jumpers are connected to blocks in place of a wire or in addition to a wire at the screw-clamp connection terminal points. Insulated jumpers eliminate the risk of your finger coming into contact with a live circuit, so they’re touch safe.
Marker cards fit into built-in label holders on the blocks.
For technical drawings and 3-D models, click on a part number.
Disconnect
Tab
Terminal Blocks (IP20 Rated) | End Covers | End Stops | Lateral Jumpers | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Each | Each | Each | Each | ||||||||||||||
| Wd., mm | Ht., mm | For Wire Gauge | Color | 1-24 | 25-Up | 1-24 | 25-Up | Environmental Rating | 1-24 | 25-Up | Insulation | 1-24 | 25-Up | ||||
300V AC/300V DC—10A Per Circuit | |||||||||||||||||
| 6 | 44.5 | 22-10 | Gray | 0000000 | 00000 | 00000 | 00000000 | 00000 | 00000 | IP20 | 0000000 | 00000 | 00000 | Insulated | 00000000 | 00000 | 00000 |
300V AC/300V DC—20A Per Circuit | |||||||||||||||||
| 8 | 47 | 22-10 | Gray | 0000000 | 0000 | 0000 | 00000000 | 000 | 000 | IP20 | 0000000 | 000 | 000 | Insulated | 00000000 | 0000 | 0000 |
320V AC/320V DC—10A Per Circuit | |||||||||||||||||
| 5 | 44.5 | 12 | Gray/Orange | 00000000 | 0000 | 0000 | 0000000 | 000 | 000 | IP20 | 0000000 | 000 | 000 | Noninsulated | 00000000 | 0000 | 0000 |
For
Horizontal Rail
Each | |||||
|---|---|---|---|---|---|
| For Terminal Block Wd., mm | Number Range | Markers Per Card | 1-24 | 25-Up | |
Blank | |||||
| 5 | __ | 100 | 00000000 | 00000 | 00000 |
| 6 | __ | 100 | 0000000 | 0000 | 0000 |
| 8, 10, 12, 13, 16, 22 | __ | 100 | 00000000 | 0000 | 0000 |
Numbered—For Horizontal Rail | |||||
| 6 | 1-100 | 100 | 0000000 | 0000 | 0000 |
| 6 | 101-200 | 100 | 0000000 | 0000 | 0000 |
| 8, 10, 12, 13, 16, 22 | 1-100 | 100 | 00000000 | 0000 | 0000 |
| 8, 10, 12, 13, 16, 22 | 101-200 | 100 | 00000000 | 0000 | 0000 |
Numbered—For Vertical Rail | |||||
| 6 | 1-100 | 100 | 0000000 | 0000 | 0000 |
| 6 | 101-200 | 100 | 0000000 | 0000 | 0000 |
| 8, 10, 12, 13, 16, 22 | 1-100 | 100 | 00000000 | 0000 | 0000 |
| 8, 10, 12, 13, 16, 22 | 101-200 | 100 | 00000000 | 0000 | 0000 |
Quick and Secure Modular DIN-Rail Mount Terminal Blocks
No need to tighten or loosen any screws—these terminals lock your wiring in place with spring clamps. Insert a slotted screwdriver to release the spring clamp and then push your wire into place. Spring-clamp wire connections withstand vibration and temperature changes. You can add as many circuits as needed with these terminal blocks and accessories; blocks mount side-by-side on DIN 3 rail.
Rated UL 94 V-0, all meet flammability standards.
Use blocks with a disconnect tab to toggle your circuit open and closed for testing.
End covers fit on the open side of a block to prevent accidental contact with a live circuit.
End stops mount at the end of a group of blocks to keep them in place.
Jumpers connect circuits between blocks to simplify wiring and leave terminals available to connect equipment. Adjacent jumpers connect terminals on adjacent blocks of the same width. Alternate jumpers connect terminals on two blocks of the same width, skipping a block in between.
Marker cards fit into built-in label holders on the blocks. Numbered marker cards include two of each number (1-50).
For technical drawings and 3-D models, click on a part number.
Disconnect
Tab
Terminal Blocks | End Covers | End Stops | Adjacent Jumpers | Alternate Jumpers | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Wd., mm | No. of Terminals Per Circuit | Current Per Circuit, A | For Wire Gauge | Color | Each | Each | Each | Each | Each | |||||
600V AC/600V DC | ||||||||||||||
| 5 | 2 | 15 | 28-12 | Gray | 00000000 | 00000 | 00000000 | 00000 | 00000000 | 00000 | 00000000 | 00000 | 00000000 | 00000 |
| 8 | 2 | 30 | 24-10 | Gray | 00000000 | 00000 | 00000000 | 0000 | 00000000 | 0000 | 00000000 | 0000 | 00000000 | 0000 |