About Structural Adhesives
More
Epoxy Structural Adhesives
Epoxies are the strongest and most weather- and chemical-resistant structural adhesives. They work especially well on metals.
Two-part epoxies must be mixed. The size listed is the combined total of the two parts.
Container | Strength | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Net Weight, oz. | Type | Begins to Harden | Reaches Full Strength | Shear, lbs./sq. in. | Peel | Mix Ratio | Consistency (Viscosity) | Temp. Range, °F | Color | For Joining | Pkg. Qty. | Pkg. | |
| 0.1 | One-Time-Use Packet | 45 min. | 24 hrs. | 2,900 | Not Rated | 1:1 | Thick Liquid (3,700 cP) | 0° to 120° | Amber | Metal, Composites | 10 | 0000000 | 000000 |
Quick-Set Epoxy Structural Adhesives
For quick repairs, these epoxies begin to harden in 6 minutes or less. Epoxies are the strongest and most weather- and chemical-resistant structural adhesives.
These have two parts that must be mixed. The size listed is the combined total of the two parts.
Container | Strength | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Net Weight, oz. | Type | Begins to Harden | Reaches Full Strength | Shear, lbs./sq. in. | Peel, lbs./in. wd. | Mix Ratio | Consistency (Viscosity) | Temp. Range, °F | Color | For Joining | Pkg. Qty. | Pkg. | |
| 0.1 | One-Time-Use Packet | 3 min. | 24 hrs. | 3,000 | 1 | 1:1 | Thick Liquid (40,000 cP) | 15° to 180° | Amber | Metal, Plastic, Rubber, Masonry | 10 | 0000000 | 000000 |
| 0.1 | One-Time-Use Packet | 3 min. | 24 hrs. | 3,710 | 2 | 1:1 | Paste (400,000 cP) | 15° to 180° | White | Metal, Masonry, Wood | 10 | 0000000 | 00000 |
Slow-Set Epoxy Structural Adhesives
To allow time to adjust and position parts, these epoxies remain workable for at least 90 minutes. The strongest and most weather- and chemical-resistant structural adhesives, epoxies work especially well on metals.
These have two parts that must be mixed. The size listed is the combined total of the two parts.
Container | Strength | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Net Weight, oz. | Type | Begins to Harden | Reaches Full Strength | Shear, lbs./sq. in. | Peel, lbs./in. wd. | Mix Ratio | Consistency (Viscosity) | Temp. Range, °F | Color | For Joining | Pkg. Qty. | Pkg. | |
| 0.1 | One-Time-Use Packet | 2 hrs. | 24 hrs. | 3,280 | Not Rated | 1:1 | Thick Liquid (30,000 cP) | -25° to 200° | Amber | Metal, Plastic, Rubber, Glass, Masonry | 10 | 0000000 | 000000 |
| 0.1 | One-Time-Use Packet | 3 hrs. | 24 hrs. | 2,800 | 24 | 1:1 | Thick Liquid (50,000 cP) | -65° to 250° | Gray | Metal, Plastic, Rubber, Glass, Masonry | 10 | 0000000 | 00000 |
Epoxy Structural Adhesive Assortments
Easily handle a variety of small jobs. Assortments include eight different epoxies in 0.1-oz. packets. The strongest and most weather- and chemical-resistant structural adhesives, epoxies work especially well on metals.
| Epoxy Type (For Joining) | Each | |
| Easy Flowing (Composites, Metal) Fast Hardening (Masonry, Metal, Rubber) For Vertical Surfaces (Masonry, Metal, Wood) General Purpose (Masonry, Metal, Plastic, Rubber) High Strength (Metal, Rubber) Machinable Surface Filler (Composites, Metal) Optically Clear (Glass, Metal) Water Resistant (Composites, Masonry, Metal) | 0000000 | 000000 |
Optically Clear Epoxy Structural Adhesives
For invisible bond lines, these adhesives dry clear. Epoxies are the strongest and most weather- and chemical-resistant structural adhesives. Choose an epoxy that hardens quickly for fast repairs, or one that hardens slowly to allow more time for positioning.
These have two parts that must be mixed. The size listed is the combined total of the two parts.
Container | Strength | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Mfr. Model No. | Net Weight, oz. | Type | Begins to Harden | Reaches Full Strength | Shear, lbs./sq. in. | Peel | Mix Ratio | Consistency (Viscosity) | Temp. Range, °F | For Joining | Pkg. Qty. | Pkg. | |
Loctite® Adhesives | |||||||||||||
| 608 | 0.14 | One-Time-Use Packet | 5 min. | 24 hrs. | 2,980 | Not Rated | 1:1 | Paste (100,000 cP) | -65° to 130° | Metal, Plastic, Rubber | 10 | 00000000 | 000000 |
Adhesives | |||||||||||||
| __ | 0.1 | One-Time-Use Packet | 60 min. | 7 days | 2,400 | Not Rated | 1.61:1 | Thick Liquid (14,000 cP) | 0° to 180° | Metal, Glass | 10 | 0000000 | 00000 |
Waterproof Epoxy Structural Adhesives
Even when used under water, these adhesives maintain their strength. The most weather- and chemical-resistant structural adhesives, epoxies tend to work especially well on metals.
Two-part epoxies must be mixed. The size listed is the combined total of the two parts.
WaterWeld and 11801, as well as one-time-use packets, can be applied to wet surfaces or under water.
Container | Strength | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Net Weight, oz. | Type | Begins to Harden | Reaches Full Strength | Shear, lbs./sq. in. | Peel | Mix Ratio | Consistency (Viscosity) | Temp. Range, °F | Color | Environment | For Joining | Pkg. Qty. | Pkg. | |
| 0.1 | One-Time-Use Packet | 25 min. | 7 days | 2,200 | Not Rated | 2.5:1 | Thick Liquid (40,000 cP) | 0° to 220° | Gray | Salt Spray, Submersible | Metal, Composites, Masonry | 10 | 0000000 | 000000 |
Conductive Adhesives for Electronics
An alternative to solder, these flexible, silver-filled adhesives accommodate joint movement. Use them to bond electrical components and repair circuits.
Epoxy adhesives are two-part adhesives that need to be mixed together. The size listed is the combined total of the two parts.
Container | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Net Weight, oz. | Begins to Harden | Reaches Full Strength | Thermal Conductivity, W/m-K | Surface Resistivity, ohms-cm | Mix Ratio | Consistency | Temp. Range, °F | For Joining | Each | |
One-Time-Use Packet | ||||||||||
| 0.09 | 3 hrs. | 24 hrs. | 1.55 | 0.05 | 1:1.15 | Paste | -75° to 230° | Ceramic, Glass, Metal | 0000000 | 000000 |
Insulating Adhesives for Electronics
Secure hardware on circuit boards while insulating current.
Epoxy adhesives are two-part adhesives that need to be mixed. The size listed is the combined total of the two parts. Loctite® 2151 resist salts, mild acids, and oils. They can also handle sudden impacts and shocks.Adhesives that meet ASTM E595, a standard used by NASA, release almost no volatile emissions that could damage sensitive electronics, even in a vacuum.
Certificates with a traceable lot number and product shelf life are available for these products. Download certificates from ORDER HISTORY after your order ships.
Container | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Mfr. Model No. | Size, fl. oz. | Type | Begins to Harden | Reaches Full Strength | Thermal Conductivity, W/m-K | Mix Ratio | Consistency | Max. Temp., °F | Color | Clarity | Specifications Met | For Joining | Each | |
Loctite® Adhesives | ||||||||||||||
| 2151 | 0.1 | One-Time-Use Packet | 45 min. | 4 hrs. | 0.95 | 100:9.5 | Paste | 235° | Blue | Opaque | ASTM E595 | Metal, Plastic | 000000000 | 000000 |
| 2151 | 0.4 | One-Time-Use Packet | 45 min. | 4 hrs. | 0.95 | 100:9.5 | Paste | 235° | Blue | Opaque | ASTM E595 | Metal, Plastic | 000000000 | 00000 |
Conductive Surface Fillers for Electronics
A high silver content allows these surface fillers to conduct electricity and heat. Use them to fill gaps and rebuild missing material on electrical connections or to assemble new components. They come as two parts. The size listed is the combined total of the two parts.
Volume resistivity measures how well a material opposes the flow of electricity. The lower the rating, the more electricity it conducts.
Thermal conductivity measures a material’s ability to transfer heat. The higher the rating, the more heat it transfers.
Container | Temp. Range, °F | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Mfr. Model No. | Net Weight, oz. | Type | Begins to Harden | Reaches Full Strength | Thermal Conductivity, W/m-K | Volume Resistivity, ohms-cm | Mix Ratio | Min. | Max. | For Use On | Each | |
Loctite® Surface Fillers | ||||||||||||
| 3888 | 0.09 | One-Time-Use Packet | 90 min. | 24 hrs. | 1.44 | 0.001 | 100:6 | -40° | 170° | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Titanium, Polycarbonate Plastic | 0000000 | 000000 |
Surface Fillers | ||||||||||||
| __ | 0.09 | One-Time-Use Packet | 90 min. | 24 hrs. | 6.05 | 0.009 | 100:6 | -75° | 250° | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Titanium, Ceramic, Glass | 0000000 | 00000 |
| __ | 0.35 | One-Time-Use Packet | 90 min. | 24 hrs. | 6.05 | 0.009 | 100:6 | -75° | 250° | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Titanium, Ceramic, Glass | 0000000 | 000000 |
Surface Fillers
These surface fillers can be used on vertical surfaces without sagging. They repair cracked, worn, and damaged surfaces. The size listed is the combined total of the two parts.
Surface fillers in one-time-use packets are also known as double-bubbles.
Container | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Net Weight | Type | Begins to Harden, min. | Reaches Full Strength | Consistency | Mix Ratio | Approx. Coverage @ Thick. | Temp. Range, °F | Color | Finishing Method | For Use On | Pkg. Qty. | Pkg. | |
Surface Fillers | |||||||||||||
| 0.1 oz. | One-Time-Use Packet | 25 | 24 hrs. | Thick Liquid | 1:1 | Not Rated | 0° to 300° | Aluminum | Machine, Tap | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium, Fiberglass | 10 | 0000000 | 000000 |