Salt Water Drains | McMaster-Carr

Filter by

System of Measurement

Pipe Size

Material

Fitting Connection

Fitting Type

Shape

Pipe Material

Thread Type

Gender

Pipe Schedule

Color

For Tank Surface

Connects To

Maximum Temperature

Mounting Location

Hole Diameter

Flange Material

Gasket Material

Maximum Pressure @ Temperature

REACH

RoHS

U.S.–Mexico–Canada Agreement (USMCA) Qualifying

Yes

DFARS Specialty Metals

Exempt

Export Control Classification Number (ECCN)

EAR99

Forward

How can we improve?

164 Products

About Pipe and Fittings

Measure your pipe and fittings to identify their pipe size, thread size, schedule, and thread type. Then, find compatible components.

UV-Resistant Polypropylene Pipe Fittings for Chemicals

Made of polypropylene, these fittings won’t deteriorate when exposed to the damaging effects of ultraviolet light and are suitable to use outdoors. They have the chemical resistance to withstand a wide variety of acids, solvents, and other harsh substances.

To prevent leaks in threaded connections, apply a sealant to the male threads. Threaded connections can be taken apart as needed for maintenance and repair. For metal threads, use PTFE tape. For plastic threads, apply a non-hardening, plastic-compatible sealant. Tape or sealants with PTFE are not recommended for plastic-to-plastic connections. When making a threaded connection be careful not to overtighten the threads. To prevent cracks and leaks, finger tighten the fitting, then wrench-tighten one to two turns.

Through-Wall Straight Connectors for Tanks with Gasket

NPT Female

Through-wall fittings are also known as bulkhead couplings; they mount through your wall or tank to create an inlet or outlet. When installing, the gasket should be on the inside of the wall.

Fittings for tanks create an inlet or outlet connection on the surface of any tank, pressure vessel, or drum.

	For Hole Dia.	For Max. Wall Thk.	For Tank Surface	Body Shape	Material	Color	Max. Pressure @ Temp.	Gasket Material		Each
NPT Female



	1/2	1 3/8"	2 1/16"	Curved, Flat	Hex	Polypropylene	White	150 psi @ 72° F	EPDM	36895K141	000000


	3/4	1 5/8"	2 1/16"	Curved, Flat	Hex	Polypropylene	White	150 psi @ 72° F	EPDM	36895K142	00000
	1	1 7/8"	2 1/16"	Curved, Flat	Hex	Polypropylene	White	150 psi @ 72° F	EPDM	36895K143	00000
	1 1/4	2 5/8"	2"	Curved, Flat	Hex	Polypropylene	White	150 psi @ 72° F	EPDM	36895K144	00000
	1 1/2	2 5/8"	2"	Curved, Flat	Hex	Polypropylene	White	150 psi @ 72° F	EPDM	36895K145	00000
	2	3 1/4"	2"	Curved, Flat	Hex	Polypropylene	White	150 psi @ 72° F	EPDM	36895K146	00000
	3	4 1/2"	2 1/8"	Curved, Flat	Hex	Polypropylene	White	150 psi @ 72° F	EPDM	36895K147	000000
	4	5 3/4"	2 7/16"	Curved, Flat	Hex	Polypropylene	White	150 psi @ 72° F	EPDM	36895K148	000000

Thread Sealant

Applicator-Top Can

Sealants cannot be sold to Colorado, Connecticut, District of Columbia, Delaware, Illinois, Indiana, Massachusetts, Maryland, Maine, Michigan, New Hampshire, New Jersey, Northern Virginia, New York, Ohio, Pennsylvania, Rhode Island, or Utah due to local VOC (Volatile Organic Compounds) regulations.

Container
Size, fl. oz.	Type	Temp. Range, ° F		Each
8	Applicator-Top Can	-100 to 600	4586K9	000000

CPVC Pipe Fittings for Chemicals

Made of CPVC, these fittings withstand salt solutions, acids, and other harsh substances. They have thick, strong walls to handle heavy duty industrial plumbing and water supply applications, such as water processing and wastewater treatment. These fittings are comparable to Corzan. Some meet ASTM D1784 specifications and testing requirements for material quality.

Warning: Never use plastic pipe fittings, flanges, and pipe with compressed air or gas.

Through-Wall Straight Connectors with Gasket

Cement Socket

Female

Through-wall fittings are also known as bulkhead couplings; they mount through your wall or tank to create an inlet or outlet. When installing, the gasket should be on the inside of the wall.

Cement-Socket Fitting Connection—Attach socket-connect ends to unthreaded pipe or another socket-connect fitting with a CPVC primer and cement (also known as solvent weld).

80 Pipe Schedule—Schedule 80 fittings have thick, strong walls for heavy duty, industrial applications.

NSF/ANSI 61—To adhere to safety standards for drinking water systems, use pipe that meets NSF/ANSI 61.

	For Hole Dia.	For Max. Wall Thk.	Pipe Schedule	Body Shape	Material	Color	Max. Pressure @ Temp.	Gasket Material	Food Industry Std.		Each
Cement Socket Female



	1/2	1 3/8"	1 5/64"	80	Hex	CPVC	Light Gray	150 psi @ 72° F	EPDM	NSF/ANSI 61	4589K486	000000


	3/4	1 5/8"	1 5/64"	80	Hex	CPVC	Light Gray	150 psi @ 72° F	EPDM	NSF/ANSI 61	4589K487	00000
	1	1 7/8"	1 5/64"	80	Hex	CPVC	Light Gray	150 psi @ 72° F	EPDM	NSF/ANSI 61	4589K488	00000
	1 1/4	2 5/8"	1"	80	Hex	CPVC	Light Gray	150 psi @ 72° F	EPDM	NSF/ANSI 61	4589K489	00000
	1 1/2	2 5/8"	1"	80	Hex	CPVC	Light Gray	150 psi @ 72° F	EPDM	NSF/ANSI 61	4589K491	00000
	2	3 1/4"	1"	80	Hex	CPVC	Light Gray	150 psi @ 72° F	EPDM	NSF/ANSI 61	4589K492	00000
	3	4 1/2"	1 1/64"	80	Hex	CPVC	Light Gray	150 psi @ 72° F	EPDM	NSF/ANSI 61	4589K493	000000
	4	5 3/4"	1 29/64"	80	Hex	CPVC	Light Gray	150 psi @ 72° F	EPDM	NSF/ANSI 61	4589K494	000000

Pipe Cement

		Each
Pipe Cement for Max. Pipe Size 6 (8-fl. oz. Can)	74605A31	000000

Through-Wall Straight Connectors for Tanks with Gasket

NPT Female

Through-wall fittings are also known as bulkhead couplings; they mount through your wall or tank to create an inlet or outlet. When installing, the gasket should be on the inside of the wall.

Fittings for tanks create an inlet or outlet connection on the surface of any tank, pressure vessel, or drum.

	For Hole Dia.	For Max. Wall Thk.	For Tank Surface	Material	Color	Max. Pressure @ Temp.	Gasket Material		Each
NPT Female



	1/2	1 3/8"	2 1/16"	Curved, Flat	CPVC	Light Gray	150 psi @ 72° F	EPDM	36895K151	000000


	3/4	1 5/8"	2 1/16"	Curved, Flat	CPVC	Light Gray	150 psi @ 72° F	EPDM	36895K152	00000
	1	1 7/8"	2 1/16"	Curved, Flat	CPVC	Light Gray	150 psi @ 72° F	EPDM	36895K153	00000
	1 1/4	2 21/32"	2"	Curved, Flat	CPVC	Light Gray	150 psi @ 72° F	EPDM	36895K21	00000
	1 1/2	2 5/8"	2"	Curved, Flat	CPVC	Light Gray	150 psi @ 72° F	EPDM	36895K155	00000
	2	3 1/4"	2"	Curved, Flat	CPVC	Light Gray	150 psi @ 72° F	EPDM	36895K156	00000
	3	4 1/2"	2 1/8"	Curved, Flat	CPVC	Light Gray	150 psi @ 72° F	EPDM	36895K22	000000
	4	5 3/4"	3 1/4"	Curved, Flat	CPVC	Light Gray	150 psi @ 72° F	EPDM	36895K23	000000

Through-Wall Straight Adapters for Tanks with Gasket

Cement Socket

Female × NPT

Female

Through-wall fittings are also known as bulkhead couplings; they mount through your wall or tank to create an inlet or outlet. When installing, the gasket should be on the inside of the wall.

Fittings for tanks create an inlet or outlet connection on the surface of any tank, pressure vessel, or drum.

Cement-Socket Fitting Connection—Attach socket-connect ends to unthreaded pipe or another socket-connect fitting with a CPVC primer and cement (also known as solvent weld).

	Pipe Size
	(A)	(B)	For Hole Dia.	For Max. Wall Thk.	For Tank Surface	Material	Color	Max. Pressure @ Temp.	Gasket Material		Each
Cement Socket Female × NPT Female



		1/2	1/2	1 3/8"	2 1/16"	Curved, Flat	CPVC	Light Gray	150 psi @ 72° F	EPDM	36895K831	000000


		3/4	3/4	1 5/8"	2 1/16"	Curved, Flat	CPVC	Light Gray	150 psi @ 72° F	EPDM	36895K832	00000
		1	1	1 7/8"	2 1/16"	Curved, Flat	CPVC	Light Gray	150 psi @ 72° F	EPDM	36895K833	00000
		1 1/4	1 1/4	2 5/8"	2"	Curved, Flat	CPVC	Light Gray	150 psi @ 72° F	EPDM	36895K838	00000
		1 1/2	1 1/2	2 5/8"	2"	Curved, Flat	CPVC	Light Gray	150 psi @ 72° F	EPDM	36895K834	00000
		2	2	3 1/4"	2"	Curved, Flat	CPVC	Light Gray	150 psi @ 72° F	EPDM	36895K835	00000
		3	3	4 1/2"	2 1/8"	Curved, Flat	CPVC	Light Gray	150 psi @ 72° F	EPDM	36895K836	000000
		4	4	5 3/4"	2 7/16"	Curved, Flat	CPVC	Light Gray	150 psi @ 72° F	EPDM	36895K837	000000
		6	6	8 1/16"	3 1/4"	Curved, Flat	CPVC	Light Gray	150 psi @ 72° F	EPDM	36895K839	000000

Thread Sealant

Applicator-Top Can

Container
Size, fl. oz.	Type	Temp. Range, ° F		Each
8	Applicator-Top Can	-100 to 600	4586K9	000000

Flame-Retardant Drain, Waste, and Vent Polypropylene Pipe Fittings for Chemicals

Made of polypropylene, these gravity-flow fittings withstand organic solvents, such as acetone, that would dissolve CPVC pipe. They also stand up to highly corrosive acids, such as hydrochloric acid, and alkalies. All meet UL and ASTM standards for flame retardance and self-extinguishment in the case of fire. They also meet strict ASTM specifications and testing requirements for material quality and product dimensions. They’re compatible with Orion Blueline No-Hub and Orion Rionfuse chemical waste pipe and pipe fittings.

Either a clamp connector or electrofusion connector is required to connect grooved ends on adapters to pipe or to another fitting with a grooved end. Clamp connectors can be easily taken apart as needed for maintenance. Grooving tools (sold separately) prepare ungrooved ends for clamping. Electrofusion connectors create a stronger, more permanent connection than clamp connectors. Use electrofusion tools (sold separately) to weld these fittings in place.

Warning: Never use plastic pipe fittings, flanges, and pipe with compressed air or gas.

Straight Connectors


Electrofusion Socket Female	Clamp On	Grooving Tool

	Straights							Grooving Tools
	Pipe Size	Material	Color	Max. Pressure @ Temp.	Flammability Rating		Each		Each
Electrofusion Socket Female



		1 1/2	Polypropylene	Blue	Not Rated	ASTM D635, UL 94 V-2	5389N262	000000	———	0


		2	Polypropylene	Blue	Not Rated	ASTM D635, UL 94 V-2	5389N263	00000	———	0
		3	Polypropylene	Blue	Not Rated	ASTM D635, UL 94 V-2	5389N265	00000	———	0
		4	Polypropylene	Blue	Not Rated	ASTM D635, UL 94 V-2	5389N266	00000	———	0


		Clamp On



				1 1/2	Polypropylene	Blue	Not Rated	ASTM D635, UL 94 V-2	5389N242	00000	5389N2	0000000


				2	Polypropylene	Blue	Not Rated	ASTM D635, UL 94 V-2	5389N243	00000	5389N3	000000
				3	Polypropylene	Blue	Not Rated	ASTM D635, UL 94 V-2	5389N245	00000	5389N5	00000000
				4	Polypropylene	Blue	Not Rated	ASTM D635, UL 94 V-2	5389N246	00000	5389N6	00000000

Straight Adapters


Electrofusion Socket Male × Grooved-End Clamp-On Male	NPT Female × Electrofusion Socket/Grooved-End Clamp-On Male	NPT Male × Electrofusion Socket/Grooved-End Clamp-On Male

Adapters with a threaded pipe end connect and disconnect easily on that side, no clamp or welding required. Thread sealant tape (sold separately) prevents leaks in threaded connections. To prevent overtightening that could cause cracks and leaks, first finger-tighten fittings, then turn once or twice with a wrench.

For Glass Pipes—Adapters for glass pipe connect to older glass piping systems with a bead-to-bead clamp (not included).

Thread Sealant Tape—Sealants cannot be sold to Colorado, Connecticut, District of Columbia, Delaware, Illinois, Indiana, Massachusetts, Maryland, Maine, Michigan, New Hampshire, New Jersey, Northern Virginia, New York, Ohio, Pennsylvania, Rhode Island, or Utah due to local VOC (Volatile Organic Compounds) regulations.

	Straights									Thread Sealant Tape
	Pipe Size
	(A)	(B)	Material	Color	For Pipe Material	Max. Pressure @ Temp.	Flammability Rating		Each		Each
NPT Female × Electrofusion Socket/Grooved-End Clamp-On Male



		1 1/2	1 1/2	Polypropylene	Blue	—	Not Rated	ASTM D635, UL 94 V-2	5377N122	000000	6802K13	00000


		2	2	Polypropylene	Blue	—	Not Rated	ASTM D635, UL 94 V-2	5377N123	00000	6802K14	0000
		3	3	Polypropylene	Blue	—	Not Rated	ASTM D635, UL 94 V-2	5377N125	00000	6802K15	0000
		4	4	Polypropylene	Blue	—	Not Rated	ASTM D635, UL 94 V-2	5377N126	000000	6802K16	00000


		NPT Male × Electrofusion Socket/Grooved-End Clamp-On Male



				1 1/2	1 1/2	Polypropylene	Blue	—	Not Rated	ASTM D635, UL 94 V-2	5377N142	00000	6802K13	0000


				2	2	Polypropylene	Blue	—	Not Rated	ASTM D635, UL 94 V-2	5377N143	00000	6802K14	0000
				3	3	Polypropylene	Blue	—	Not Rated	ASTM D635, UL 94 V-2	5377N145	00000	6802K15	0000
				4	4	Polypropylene	Blue	—	Not Rated	ASTM D635, UL 94 V-2	5377N146	000000	6802K16	00000


				Electrofusion Socket Male × Grooved-End Clamp-On Male



						1 1/2	1 1/2	Polypropylene	Blue	Glass	Not Rated	ASTM D635, UL 94 V-2	5377N102	000000	———	0


						2	2	Polypropylene	Blue	Glass	Not Rated	ASTM D635, UL 94 V-2	5377N103	000000	———	0
						3	3	Polypropylene	Blue	Glass	Not Rated	ASTM D635, UL 94 V-2	5377N105	000000	———	0
						4	4	Polypropylene	Blue	Glass	Not Rated	ASTM D635, UL 94 V-2	5377N106	000000	———	0

Swivels-Until-Tightened Straight Adapters


NPT Female × Electrofusion Socket/Grooved-End Clamp-On Male	Grooving Tool

Fittings that swivel until tightened connect an NPT-threaded sink drain to a 270° bend fitting. They’re also known as sink drain tailpieces. They rotate for easy installation and have a quick-access nut that lets you perform maintenance without removing the fitting from your line. Cut them to length.

	Straights									Grooving Tools
	Pipe Size
	(A)	(B)	Body Shape	Material	Color	Max. Pressure @ Temp.	Flammability Rating		Each		Each
NPT Female × Electrofusion Socket/Grooved-End Clamp-On Male



		1 1/2	1 1/2	Hex	Polypropylene	Blue	Not Rated	ASTM D635, UL 94 V-2	5389N222	0000000	5389N2	0000000


		2	2	Hex	Polypropylene	Blue	Not Rated	ASTM D635, UL 94 V-2	5389N223	000000	5389N3	000000

Straight Reducers

Grooved-End

Clamp-On Male ×

Electrofusion

Socket/Grooved-End

Clamp-On Male

	Pipe Size
	(A)	(B)	Material	Color	Max. Pressure @ Temp.	Flammability Rating		Each
Grooved-End Clamp-On Male × Electrofusion Socket/Grooved-End Clamp-On Male



		2	1 1/2	Polypropylene	Blue	Not Rated	ASTM D635, UL 94 V-2	5389N281	000000


		3	1 1/2	Polypropylene	Blue	Not Rated	ASTM D635, UL 94 V-2	5389N282	00000
		3	2	Polypropylene	Blue	Not Rated	ASTM D635, UL 94 V-2	5389N283	00000
		4	1 1/2	Polypropylene	Blue	Not Rated	ASTM D635, UL 94 V-2	5389N284	000000
		4	2	Polypropylene	Blue	Not Rated	ASTM D635, UL 94 V-2	5389N285	000000
		4	3	Polypropylene	Blue	Not Rated	ASTM D635, UL 94 V-2	5389N286	000000

90° Elbow Connectors

Image of Product. Bottom orientation. Pipe and Fittings. Flame-Retardant Drain, Waste, and Vent Polypropylene Pipe Fittings for Chemicals, 90° Elbow Connectors, Electrofusion Socket/Grooved-End Clamp-On Male.

Electrofusion

Socket/Grooved-End

Clamp-On Male

	Material	Color	Max. Pressure @ Temp.	Flammability Rating		Each
Electrofusion Socket/Grooved-End Clamp-On Male



	1 1/2	Polypropylene	Blue	Not Rated	ASTM D635, UL 94 V-2	5389N142	000000


	2	Polypropylene	Blue	Not Rated	ASTM D635, UL 94 V-2	5389N143	00000
	3	Polypropylene	Blue	Not Rated	ASTM D635, UL 94 V-2	5389N145	00000
	4	Polypropylene	Blue	Not Rated	ASTM D635, UL 94 V-2	5389N146	000000

45° Elbow Connectors

Image of Product. Bottom orientation. Pipe and Fittings. Flame-Retardant Drain, Waste, and Vent Polypropylene Pipe Fittings for Chemicals, 45° Elbow Connectors, Electrofusion Socket/Grooved-End Clamp-On Male.

Electrofusion

Socket/Grooved-End

Clamp-On Male

	Material	Color	Max. Pressure @ Temp.	Flammability Rating		Each
Electrofusion Socket/Grooved-End Clamp-On Male



	1 1/2	Polypropylene	Blue	Not Rated	ASTM D635, UL 94 V-2	5389N122	000000


	2	Polypropylene	Blue	Not Rated	ASTM D635, UL 94 V-2	5389N123	00000
	3	Polypropylene	Blue	Not Rated	ASTM D635, UL 94 V-2	5389N125	00000
	4	Polypropylene	Blue	Not Rated	ASTM D635, UL 94 V-2	5389N126	00000

Offset Tee Connectors

Image of Product. Bottom orientation. Pipe and Fittings. Flame-Retardant Drain, Waste, and Vent Polypropylene Pipe Fittings for Chemicals, Offset Tee Connectors, Electrofusion Socket/Grooved-End Clamp-On Male.

Electrofusion

Socket/Grooved-End

Clamp-On Male

Offset tees are also known as sanitary tees and eccentric tees. They have an offset branch so the line can drain. Use them for applications that require frequent cleaning and inspecting.

	Material	Color	Max. Pressure @ Temp.	Flammability Rating		Each
Electrofusion Socket/Grooved-End Clamp-On Male



	1 1/2	Polypropylene	Blue	Not Rated	ASTM D635, UL 94 V-2	5389N182	000000


	2	Polypropylene	Blue	Not Rated	ASTM D635, UL 94 V-2	5389N183	00000
	3	Polypropylene	Blue	Not Rated	ASTM D635, UL 94 V-2	5389N185	000000
	4	Polypropylene	Blue	Not Rated	ASTM D635, UL 94 V-2	5389N186	000000

Wye Connectors

Image of Product. Bottom orientation. Pipe and Fittings. Flame-Retardant Drain, Waste, and Vent Polypropylene Pipe Fittings for Chemicals, Wye Connectors, Electrofusion Socket/Grooved-End Clamp-On Male.

Electrofusion

Socket/Grooved-End

Clamp-On Male

	Material	Color	Max. Pressure @ Temp.	Flammability Rating		Each
Electrofusion Socket/Grooved-End Clamp-On Male



	1 1/2	Polypropylene	Blue	Not Rated	ASTM D635, UL 94 V-2	5389N322	000000


	2	Polypropylene	Blue	Not Rated	ASTM D635, UL 94 V-2	5389N323	00000
	3	Polypropylene	Blue	Not Rated	ASTM D635, UL 94 V-2	5389N325	00000
	4	Polypropylene	Blue	Not Rated	ASTM D635, UL 94 V-2	5389N326	000000

Double Wye Connectors

Image of Product. Bottom orientation. Pipe and Fittings. Flame-Retardant Drain, Waste, and Vent Polypropylene Pipe Fittings for Chemicals, Double Wye Connectors, Electrofusion Socket/Grooved-End Clamp-On Male.

Electrofusion

Socket/Grooved-End

Clamp-On Male

	Material	Color	Max. Pressure @ Temp.	Flammability Rating		Each
Electrofusion Socket/Grooved-End Clamp-On Male



	1 1/2	Polypropylene	Blue	Not Rated	ASTM D635, UL 94 V-2	5389N162	0000000


	2	Polypropylene	Blue	Not Rated	ASTM D635, UL 94 V-2	5389N163	000000
	3	Polypropylene	Blue	Not Rated	ASTM D635, UL 94 V-2	5389N165	000000
	4	Polypropylene	Blue	Not Rated	ASTM D635, UL 94 V-2	5389N166	000000

External-Square-Drive Plugs/Straight Adapters

Electrofusion

Socket/Grooved-End

Clamp-On Male

	Body Shape	Material	Color	Max. Pressure @ Temp.	Flammability Rating		Each
Electrofusion Socket/Grooved-End Clamp-On Male



	1 1/2	Hex	Polypropylene	Blue	Not Rated	ASTM D635, UL 94 V-2	5389N202	000000


	2	Hex	Polypropylene	Blue	Not Rated	ASTM D635, UL 94 V-2	5389N203	00000
	3	Hex	Polypropylene	Blue	Not Rated	ASTM D635, UL 94 V-2	5389N205	000000
	4	Hex	Polypropylene	Blue	Not Rated	ASTM D635, UL 94 V-2	5389N206	000000

270° Bend Connectors

270° Bend

270° Bend Connectors—270° bend fittings are also known as P-traps.

	Material	Color	Max. Pressure @ Temp.	Flammability Rating	Fitting Type		Each
Electrofusion Socket/Grooved-End Clamp-On Male



	1 1/2	Polypropylene	Blue	Not Rated	ASTM D635, UL 94 V-2	270° Bend	5389N102	0000000


	2	Polypropylene	Blue	Not Rated	ASTM D635, UL 94 V-2	270° Bend	5389N103	000000

Union 270° Bend Connectors

Union 270° Bend

Union 270° Bend Connectors—270° bend fittings are also known as P-traps. They separate into three pieces, so you can access your line.

	Material	Color	Max. Pressure @ Temp.	Flammability Rating	Fitting Type		Each
Electrofusion Socket/Grooved-End Clamp On Male



	1 1/2	Polypropylene	Blue	Not Rated	ASTM D635, UL 94 V-2	Union 270° Bend	5389N302	0000000


	2	Polypropylene	Blue	Not Rated	ASTM D635, UL 94 V-2	Union 270° Bend	5389N303	000000

Neutralization Tanks

Add a neutralization tank under your sink and fill it with limestone to safely discharge acidic waste.

Outlet			Inlet
Pipe Size	Thread Type	Gender	Pipe Size	Thread Type	Gender	Cap., gal.		Each
1 1/2	NPT	Female	1 1/2	NPT	Female	1 1/2	5389N22	0000000
2	NPT	Female	2	NPT	Female	1 1/2	5389N23	000000

Electrofusion Welders

Data Connection	Output Current @ Voltage	Input Voltage Range, V AC	Input Freq. Range, Hz	Digital Display Type	Includes		Each
Bluetooth	20 amp @ 95V AC	97 to 150	47 to 70	LCD	12 ft. Input Cable, 24 ft. Output Cable	5389N11	000000000

Low-Pressure Stainless Steel Clamp-On Pipe Fittings

Create liquid-tight connections with these connectors. They join rigid pipe of the same or different materials.

Straight Connectors with FEP Sleeve

Clamp On

With an FEP sleeve and PTFE sealing tape, these connectors withstand chemicals better than rubber connectors. Use them for joining low-pressure chemical waste drainpipe and fittings or transitioning between different chemical piping. The connectors are 316 stainless steel for excellent corrosion resistance. They stand up to wet environments, just like 304 stainless steel, but unlike 304 stainless steel, they will not corrode from salt water, chlorine solutions, and chemicals.

To install, chamfer and deburr both ends of the pipe you need to join. Mark each pipe adjacent to the connector bands and apply 10 layers of the PTFE tape directly over each line. Doing this creates a seal between the sleeve and the pipe for extra leak protection. Then, center the FEP sleeve over the tape and use a heat gun to shrink the sleeve onto the pipe. Next, center the connector and tighten the clamps to 60 inch-lbs. to form a tight seal. Finally, test for leaks.

316 Stainless Steel—Fittings are the most corrosion resistant. They stand up to wet environments, just like 304 stainless steel fittings, but unlike 304 stainless steel, they will not corrode from salt water, chlorine solutions, and chemicals.

				316 Stainless Steel
	For Pipe Size	For Pipe OD	Sleeve Material	Max. Pressure @ Temp.		Each
Clamp On



		1 1/2	1.7" to 2.05"	FEP	4 psi @ 72° F	4854N11	0000000


		2	2.1" to 2.6"	FEP	4 psi @ 72° F	4854N12	000000
		2 1/2	2.6" to 3.1"	FEP	4 psi @ 72° F	4854N13	000000
		3	3.15" to 3 1/2"	FEP	4 psi @ 72° F	4854N14	000000
		4	4.3" to 5.2"	FEP	4 psi @ 72° F	4854N15	000000
		6	6.2" to 7"	FEP	4 psi @ 72° F	4854N16	000000
		8	8.35" to 9.2"	FEP	4 psi @ 72° F	4854N17	000000

Flame-Retardant Drain, Waste, and Vent CPVC Pipe Fittings for Chemicals

Made of CPVC, these fittings have better chemical resistance than ABS plastic gravity-flow fittings and can stand up to highly-corrosive acids and other harsh substances. They meet NSF/ANSI 14 requirements for use in corrosive waste gravity-flow systems. Fittings are comparable to Corzan. They meet UL 94 V-0 for flame retardance and ASTM F2618 specifications and testing requirements for material quality. They are IAPMO certified to comply with the International Association for Plumbing and Mechanical Officials product performance standards and the Uniform Plumbing Code (UPC) for installation and repair of plumbing systems.

Warning: Never use plastic pipe fittings, flanges, and pipe with compressed air or gas.

Straight Connectors

Image of Product. Front orientation. Pipe and Fittings. Flame-Retardant Drain, Waste, and Vent CPVC Pipe Fittings for Chemicals, Straight Connectors, Cement Socket Female.

Cement Socket

Female

Cement-Socket Fitting Connection—Attach socket-connect ends to unthreaded pipe or another socket-connect fitting with a CPVC primer and cement (also known as solvent weld).

	Material	Color	Max. Pressure @ Temp.	Certification	Flammability Rating		Each
Cement Socket Female



	1 1/2	CPVC	Light Gray	Not Rated	IAPMO Listed	UL 94 V-0	1621T19	000000


	2	CPVC	Light Gray	Not Rated	IAPMO Listed	UL 94 V-0	1621T21	00000

Pipe Cement

		Each
Pipe Cement (16-fl. oz. Can)	1621T27	000000

Straight Adapters

Cement Socket

Female × NPT

Female

Cement-Socket Fitting Connection—Attach socket-connect ends to unthreaded pipe or another socket-connect fitting with a CPVC primer and cement (also known as solvent weld).

	Pipe Size
	(A)	(B)	Material	Color	Max. Pressure @ Temp.	Certification	Flammability Rating		Each
Cement Socket Female × NPT Female



		1 1/2	1 1/2	CPVC	Light Gray	Not Rated	IAPMO Listed	UL 94 V-0	1621T11	000000


		2	2	CPVC	Light Gray	Not Rated	IAPMO Listed	UL 94 V-0	1621T12	00000

Pipe Cement

		Each
Pipe Cement (16-fl. oz. Can)	1621T27	000000

Straight Reducers

Image of Product. Front orientation. Contains Annotated. Pipe and Fittings. Flame-Retardant Drain, Waste, and Vent CPVC Pipe Fittings for Chemicals, Straight Reducers, Cement Socket Female × Cement Socket Female.

Cement Socket Female ×

Cement Socket Female

Cement-Socket Fitting Connection—Attach socket-connect ends to unthreaded pipe or another socket-connect fitting with a CPVC primer and cement (also known as solvent weld).

	Pipe Size
	(A)	(B)	Material	Color	Max. Pressure @ Temp.	Certification	Flammability Rating		Each
Cement Socket Female × Cement Socket Female



		2	1 1/2	CPVC	Light Gray	Not Rated	IAPMO Listed	UL 94 V-0	1621T26	000000

Pipe Cement

90° Elbow Connectors

Image of Product. Front orientation. Pipe and Fittings. Flame-Retardant Drain, Waste, and Vent CPVC Pipe Fittings for Chemicals, 90° Elbow Connectors, Cement Socket Female.

Cement Socket

Female

Cement-Socket Fitting Connection—Attach socket-connect ends to unthreaded pipe or another socket-connect fitting with a CPVC primer and cement (also known as solvent weld).

	Material	Color	Max. Pressure @ Temp.	Certification	Flammability Rating		Each
Cement Socket Female



	1 1/2	CPVC	Light Gray	Not Rated	IAPMO Listed	UL 94 V-0	1621T13	000000


	2	CPVC	Light Gray	Not Rated	IAPMO Listed	UL 94 V-0	1621T14	00000

Pipe Cement

45° Elbow Connectors

Image of Product. Front orientation. Pipe and Fittings. Flame-Retardant Drain, Waste, and Vent CPVC Pipe Fittings for Chemicals, 45° Elbow Connectors, Cement Socket Female.

Cement Socket

Female

Cement-Socket Fitting Connection—Attach socket-connect ends to unthreaded pipe or another socket-connect fitting with a CPVC primer and cement (also known as solvent weld).

	Material	Color	Max. Pressure @ Temp.	Certification	Flammability Rating		Each
Cement Socket Female



	1 1/2	CPVC	Light Gray	Not Rated	IAPMO Listed	UL 94 V-0	1621T17	000000


	2	CPVC	Light Gray	Not Rated	IAPMO Listed	UL 94 V-0	1621T18	00000

Pipe Cement

Offset Tee Connectors

Image of Product. Front orientation. Pipe and Fittings. Flame-Retardant Drain, Waste, and Vent CPVC Pipe Fittings for Chemicals, Offset Tee Connectors, Cement Socket Female.

Cement Socket Female

Offset tees are also known as sanitary tees and eccentric tees. They have an offset branch so the line can drain. Use them for applications that require frequent cleaning and inspecting.

Cement-Socket Fitting Connection—Attach socket-connect ends to unthreaded pipe or another socket-connect fitting with a CPVC primer and cement (also known as solvent weld).

	Material	Color	Max. Pressure @ Temp.	Certification	Flammability Rating		Each
Cement Socket Female



	1 1/2	CPVC	Light Gray	Not Rated	IAPMO Listed	UL 94 V-0	1621T15	000000


	2	CPVC	Light Gray	Not Rated	IAPMO Listed	UL 94 V-0	1621T16	00000

Pipe Cement

Wye Connectors

Cement Socket Female

Cement-Socket Fitting Connection—Attach socket-connect ends to unthreaded pipe or another socket-connect fitting with a CPVC primer and cement (also known as solvent weld).

	Material	Color	Max. Pressure @ Temp.	Certification	Flammability Rating		Each
Cement Socket Female



	1 1/2	CPVC	Light Gray	Not Rated	IAPMO Listed	UL 94 V-0	1621T22	000000


	2	CPVC	Light Gray	Not Rated	IAPMO Listed	UL 94 V-0	1621T23	00000

Pipe Cement

270° Bend Connectors

Image of Product. Front orientation. Pipe Traps. Flame-Retardant Drain, Waste, and Vent CPVC Pipe Fittings for Chemicals.

270° bend fittings are also known as P-traps.

	Material	Color	Max. Pressure @ Temp.	Certification	Flammability Rating	Fitting Type		Each
Cement Socket Female



	1 1/2	CPVC	Light Gray	Not Rated	IAPMO Listed	UL 94 V-0	270° Bend	1621T24	000000


	2	CPVC	Light Gray	Not Rated	IAPMO Listed	UL 94 V-0	270° Bend	1621T25	000000

Thread Sealant

Applicator-Top Can

Container
Size, fl. oz.	Type	Temp. Range, ° F		Each
8	Applicator-Top Can	-100 to 600	4586K9	000000

High-Purity Polypropylene Pipe Fittings for Drinking Water

The inside of these fittings won’t leach contaminants into your line or accumulate particles—they’re polished to an ultra-smooth 12 Ra finish, which also makes them easy to clean. Made of polypropylene, they resist organic solvents, acids, and alkalis better than CPVC fittings. These fittings meet NSF/ANSI 61 for use with drinking water, and they’re FDA compliant for direct contact with food. They also meet ASTM requirements for material and performance, and ISO requirements for dimensions.

Connect them to pipe with socket fusion welding for a strong, permanent bond. Use a socket fusion tool with a heater bushing (sold separately) that matches your pipe size. To prevent leaks in threaded connections, apply a sealant to the male threads. Threaded connections can be taken apart as needed for maintenance and repair. For metal threads, use PTFE tape. For plastic threads, apply a non-hardening, plastic-compatible sealant. Tape or sealants with PTFE are not recommended for plastic-to-plastic connections. When making a threaded connection be careful not to overtighten the threads. To prevent cracks and leaks, finger tighten the fitting, then wrench-tighten one to two turns.

Warning: Never use plastic pipe fittings, flanges, and pipe with compressed air or gas.

Union Straight Connectors

Socket Fusion Weld Female

Union fittings separate into three pieces so you can access your line without unthreading pipe connections.

NSF/ANSI 61—To adhere to safety standards for drinking water systems, use pipe that meets NSF/ANSI 61.

	Material	Color	Max. Pressure @ Temp.	Food Industry Std.		Each
Socket Fusion Weld Female



	1/2	Polypropylene	Light Gray	150 psi @ 72° F	FDA Compliant 21 CFR 177.1520, FDA Compliant 21 CFR 178.3297, NSF/ANSI 61	5381N038	0000000


	1/2	Polypropylene	Light Gray	150 psi @ 72° F	FDA Compliant 21 CFR 177.1520, FDA Compliant 21 CFR 178.3297, NSF/ANSI 61	5381N044	000000
	3/4	Polypropylene	Light Gray	150 psi @ 72° F	FDA Compliant 21 CFR 177.1520, FDA Compliant 21 CFR 178.3297, NSF/ANSI 61	5381N039	000000
	3/4	Polypropylene	Light Gray	150 psi @ 72° F	FDA Compliant 21 CFR 177.1520, FDA Compliant 21 CFR 178.3297, NSF/ANSI 61	5381N045	000000
	1	Polypropylene	Light Gray	150 psi @ 72° F	FDA Compliant 21 CFR 177.1520, FDA Compliant 21 CFR 178.3297, NSF/ANSI 61	5381N041	000000
	1	Polypropylene	Light Gray	150 psi @ 72° F	FDA Compliant 21 CFR 177.1520, FDA Compliant 21 CFR 178.3297, NSF/ANSI 61	5381N046	000000
	1 1/2	Polypropylene	Light Gray	150 psi @ 72° F	FDA Compliant 21 CFR 177.1520, FDA Compliant 21 CFR 178.3297, NSF/ANSI 61	5381N042	000000
	1 1/2	Polypropylene	Light Gray	150 psi @ 72° F	FDA Compliant 21 CFR 177.1520, FDA Compliant 21 CFR 178.3297, NSF/ANSI 61	5381N047	000000
	2	Polypropylene	Light Gray	150 psi @ 72° F	FDA Compliant 21 CFR 177.1520, FDA Compliant 21 CFR 178.3297, NSF/ANSI 61	5381N043	000000
	2	Polypropylene	Light Gray	150 psi @ 72° F	FDA Compliant 21 CFR 177.1520, FDA Compliant 21 CFR 178.3297, NSF/ANSI 61	5381N048	000000

Stub-End Straight Adapters

Straight

Adapter

Stub-end straight adapters are used with flanges. Slide a flange onto the stub end and weld the stub end to pipe (not the flange). Since the flange isn’t welded to the pipe, it can be disconnected easily, which creates an access point for frequent cleaning and inspecting.

Pipe Size	Wall Thk.	Flange OD	Finished Material		Each
1/2	0.119"	1 47/64"	Polypropylene	5381N085	000000
3/4	0.138"	2 1/8"	Polypropylene	5381N086	00000
1	0.138"	2 31/64"	Polypropylene	5381N087	00000
1 1/2	0.195"	3 15/64"	Polypropylene	5381N088	00000
2	0.178"	3 31/32"	Polypropylene	5381N089	00000

Straight Ball Valves

Image of Product. Front orientation. Manual On-Off Valves.

Add a ball valve to control the flow in your line.

									EPDM Seal		Viton® Fluoroelastomer Seal
Pipe Size	Flow Coefficient (Cv)	Vacuum Rating, in. Hg	Port Type	End-to-End Lg.	Body Material	Color	Max. Pressure @ Temp.	Food Industry Std.		Each		Each
1/2	12.5	29.92	Full	3 13/16"	Polypropylene	Light Gray	150 psi @ 0° F	FDA Compliant 21 CFR 177.1520, FDA Compliant 21 CFR 178.3297, NSF/ANSI 61	5381N074	0000000	5381N079	0000000
3/4	28	29.92	Full	4 9/32"	Polypropylene	Light Gray	150 psi @ 0° F	FDA Compliant 21 CFR 177.1520, FDA Compliant 21 CFR 178.3297, NSF/ANSI 61	5381N075	000000	5381N081	000000
1	50.9	29.92	Full	4 23/32"	Polypropylene	Light Gray	150 psi @ 0° F	FDA Compliant 21 CFR 177.1520, FDA Compliant 21 CFR 178.3297, NSF/ANSI 61	5381N076	000000	5381N082	000000
1 1/2	150	29.92	Full	6 1/16"	Polypropylene	Light Gray	150 psi @ 0° F	FDA Compliant 21 CFR 177.1520, FDA Compliant 21 CFR 178.3297, NSF/ANSI 61	5381N077	000000	5381N083	000000
2	230	29.92	Full	6 13/16"	Polypropylene	Light Gray	150 psi @ 0° F	FDA Compliant 21 CFR 177.1520, FDA Compliant 21 CFR 178.3297, NSF/ANSI 61	5381N078	000000	5381N084	000000

Socket Fusion Welders

		Each
Welder	5381N067	0000000

Socket Fusion Heater Bushings

For Pipe Size		Each
1	5381N071	0000000
1 1/2	5381N072	000000
2	5381N073	000000

Flame-Retardant Drain, Waste, and Vent CPVC Pipe Nipples and Pipe for Chemicals

Use this pipe in gravity-flow applications that involve highly-corrosive chemicals–it meets NSF/ANSI 14 requirements for use in corrosive waste systems. Pipe is made of CPVC, which has better chemical resistance than ABS plastic to stand up to acids and other harsh substances. Connect to unthreaded female socket-connect fittings using a CPVC primer and cement (also known as solvent weld). Pipe is comparable to Corzan. It meets UL 94 V-0 for flame retardance and ASTM F2618 specifications and testing requirements for material quality. It is IAPMO certified to comply with the International Association for Plumbing and Mechanical Officials product performance standards and the Uniform Plumbing Code (UPC) for installation and repair of plumbing systems.

Warning: Never use plastic pipe fittings, flanges, and pipe with compressed air or gas.

Pipe—Unthreaded

Image of Product. Front orientation. Pipe and Fittings. Flame-Retardant Drain, Waste, and Vent CPVC Pipe Nipples and Pipe for Chemicals, Pipe—Unthreaded, Cement Socket Male.

Cement Socket Male

	Max. Pressure @ Temp.	Certification	Flammability Rating		Each
Cement Socket Male







	1 1/2 Pipe Size

	2	CPVC	Light Gray	Not Rated	IAPMO Listed	UL 94 V-0	1621T51	000000


	4	CPVC	Light Gray	Not Rated	IAPMO Listed	UL 94 V-0	1621T52	00000
	8	CPVC	Light Gray	Not Rated	IAPMO Listed	UL 94 V-0	1621T53	000000




			2 Pipe Size

			2	CPVC	Light Gray	Not Rated	IAPMO Listed	UL 94 V-0	1621T54	00000


			4	CPVC	Light Gray	Not Rated	IAPMO Listed	UL 94 V-0	1621T55	000000
			8	CPVC	Light Gray	Not Rated	IAPMO Listed	UL 94 V-0	1621T56	000000

Pipe Cement

Flame-Retardant Drain, Waste, and Vent Polypropylene Pipe Nipples and Pipe for Chemicals

Made of polypropylene, this gravity-flow pipe stands up to tough organic solvents, such as acetone, that would dissolve CPVC pipe. You can also use it for lines with highly corrosive acids, such as hydrochloric acid, and alkalies. This pipe meets strict ASTM specifications and testing requirements for material quality and product dimensions. It also meets ASTM and UL flammability standards. This pipe is known as schedule 40 pipe.

Connect clamp-on fittings to the grooved-ends of this pipe when you need frequent access to your line. If you need to trim down the pipe, you'll need a grooving tool (sold separately) to add a groove for your fitting. For a permanent connection, fuse socket-connect fittings on with an electrofusion tool (sold separately).

Warning: Never use plastic pipe fittings, flanges, and pipe with compressed air or gas.

Pipe—Unthreaded


Male	Grooving Tool

	Pipe								Grooving Tools
	Lg., ft.	Pipe Schedule	Material	Color	Max. Pressure @ Temp.	Flammability Rating		Each		Each
Electrofusion Socket/Grooved-End Clamp-On Male







				1 1/2 Pipe Size

				10	40	Polypropylene	Blue	Not Rated	ASTM D635, UL 94 V-2	5387N24	0000000	5389N2	0000000




						2 Pipe Size

						10	40	Polypropylene	Blue	Not Rated	ASTM D635, UL 94 V-2	5387N34	000000	5389N3	000000




								3 Pipe Size

								10	40	Polypropylene	Blue	Not Rated	ASTM D635, UL 94 V-2	5387N54	000000	5389N5	00000000




										4 Pipe Size

										10	40	Polypropylene	Blue	Not Rated	ASTM D635, UL 94 V-2	5387N64	000000	5389N6	00000000

Electrofusion Welders

Data Connection	Output Current @ Voltage	Input Voltage Range, V AC	Input Freq. Range, Hz	Digital Display Type	Includes		Each
Bluetooth	20 amp @ 95V AC	97 to 150	47 to 70	LCD	12 ft. Input Cable, 24 ft. Output Cable	5389N11	000000000

Gravity-Flow CPVC Pipe Traps for Corrosive Chemical Waste

Made of CPVC, these traps have better chemical resistance than ABS gravity-flow traps and can stand up to highly-corrosive acids and other harsh substances. Traps are comparable to Corzan.

Attach socket-connect ends to unthreaded pipe or another socket-connect fitting with a CPVC primer and cement (also known as solvent weld).

Warning: Never use plastic pipe traps and pipe with compressed air or gas.

270° Bend Connectors, Female Socket Connect

Image of Product. Front orientation. Pipe Traps. Gravity-Flow CPVC Pipe Traps for Corrosive Chemical Waste.

270° bend traps are also known as P-traps. They separate into three pieces, so you can access your line.

IAPMO Listed—Traps are IAPMO certified to comply with the International Association for Plumbing and Mechanical Officials product performance standards and the Uniform Plumbing Code (UPC) for installation and repair of plumbing systems.

NSF/ANSI 14—Traps meet NSF/ANSI 14 requirements for use in corrosive waste gravity-flow systems.

UL 94 V-0—These traps meet UL 94 V-0 for flame retardance and ASTM F2618 specifications and testing requirements for material quality.

						For Pipe
Pipe Size	Socket Depth	Material	Color	For Use With	Temp. Range, ° F	Schedule	Material	Specs. Met	Certification	Food Industry Std.	Flammability Rating		Each



	1 1/2	11/16"	CPVC	Light Gray	Hydrochloric Acid, Nitric Acid, Salt Water, Sulfuric Acid	40 to 200	40	CPVC	ASTM F2618	IAPMO Listed	NSF/ANSI 14	UL 94 V-0	1621T24	000000


	2	3/4"	CPVC	Light Gray	Hydrochloric Acid, Nitric Acid, Salt Water, Sulfuric Acid	40 to 200	40	CPVC	ASTM F2618	IAPMO Listed	NSF/ANSI 14	UL 94 V-0	1621T25	000000

Cement

Gravity-Flow Polypropylene Pipe Traps for Corrosive Chemical Waste

Made of polypropylene, these gravity-flow traps withstand organic solvents, such as acetone, that would dissolve CPVC pipe. They also stand up to highly corrosive acids, such as hydrochloric acid, and alkalies. All meet UL and ASTM standards for flame retardance and self-extinguishment in the case of fire. They also meet strict ASTM specifications and testing requirements for material quality and product dimensions. They’re compatible with Flame-Retardant Drain, Waste, and Vent Polypropylene Pipe Nipples and Pipe for Chemicals, Orion Blueline No-Hub and Orion Rionfuse chemical waste pipe and pipe fittings.

270° Bend Connectors, Male Grooved End

Image of Product. Bottom orientation. Pipe Traps. Gravity-Flow Polypropylene Pipe Traps for Corrosive Chemical Waste, 270° Bend Connectors, Male Grooved End.

270° bend connectors are also known as P-traps.

Material	Color	For Use With	Max. Temp., ° F	Specs. Met	Flammability Rating		Each



1 1/2	Polypropylene	Blue	Solvents, Deionized Water, Hydrochloric Acid, Oil, Phosphoric Acid, Salt Water	220	ASTM D4101, ASTM F1412	ASTM D635, UL 94 V-2	5389N102	0000000


2	Polypropylene	Blue	Solvents, Deionized Water, Hydrochloric Acid, Oil, Phosphoric Acid, Salt Water	220	ASTM D4101, ASTM F1412	ASTM D635, UL 94 V-2	5389N103	000000

Union 270° Bend Connectors, Male Grooved End

Image of Product. Bottom orientation. Pipe Traps. Gravity-Flow Polypropylene Pipe Traps for Corrosive Chemical Waste, Union 270° Bend Connectors, Male Grooved End.

Union connectors separate into three pieces for easy access to your line.

270° bend connectors are also known as P-traps.

Material	Color	For Use With	Max. Temp., ° F	Specs. Met	Flammability Rating		Each



1 1/2	Polypropylene	Blue	Solvents, Deionized Water, Hydrochloric Acid, Oil, Phosphoric Acid, Salt Water	220	ASTM D4101, ASTM F1412	ASTM D635, UL 94 V-2	5389N302	0000000


2	Polypropylene	Blue	Solvents, Deionized Water, Hydrochloric Acid, Oil, Phosphoric Acid, Salt Water	220	ASTM D4101, ASTM F1412	ASTM D635, UL 94 V-2	5389N303	000000