Filter by
For Use On
Material
Abrasive Material
For Finish
Sold As
Grit Rating
Tooth Style
Surface Texture
Container Type
DFARS Specialty Metals
Export Control Classification Number (ECCN)
Abrasive Bond Material
Grinding Bit Sets for Metals
 |
Each set contains a selection of grinding bits. All include bits made of aluminum oxide, which is the most common abrasive used for grinding metal. These bits are also known as mounted points and die grinder bits.
Caution: As bit shank is exposed beyond 1/2", maximum safe rpm decreases significantly. Refer to ANSI standard B7.1. Use only accessories that have a greater rpm rating than the maximum speed of the grinder you choose.
For Steel, For Stainless Steel, For Aluminum, For Brass, For Bronze, For Copper, For Iron, and For Nickel—Sets for steel, stainless steel, aluminum, brass, bronze, copper, iron, and nickel contain bits made from a range of abrasive materials in different shapes and sizes. They’ll help you achieve varying levels of finish on a wide range of materials. Cotton laminate/aluminum oxide blend bits remove more material than rubber-cushioned aluminum oxide bits, and they’ll create a nicer finish than vitrified ceramic alumina bits. Bits with nylon mesh remove the least material but create the nicest finish.
Abrasive | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
No. of Pieces | Includes | Material | Bond Material | Shank Lg. | Color | Grit (Surface Texture) | Each | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
For Steel and Iron | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
1/8" Diameter Shank | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 12 | Foam Block Stand; Two each: B42, B44, B46, B52, B53, B103 | Aluminum Oxide | Vitrified Clay | 1 1/2" | Orange | 60 (Rough) | 6165A11 | 000000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 20 | Dressing Stone; One each: A24, B42, B51, B52, B54, B61, B90, B91, B102, B111, B112, B121, B122, B123, B131, B135, W185, W201, W202, W203 | Aluminum Oxide | Vitrified Clay | 1 1/2" | Red | 80 (Smooth) | 4524A14 | 00000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 50 | Foam Block Stand; Two each: B97, Six Each: B44, W144, W145, W154, W163, W170, W176, W185 | Aluminum Oxide | Vitrified Clay | 1 1/2" | Red | 36 (Rough) | 4524A125 | 000000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 50 | Foam Block Stand; Two each: B97, Six Each: B44, W144, W145, W154, W163, W170, W176, W185 | Aluminum Oxide | Vitrified Clay | 1 1/2" | Red | 60 (Rough) | 4524A12 | 000000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 144 | Foam Block Stand; Nine each: B44, B52, B97, B121, W142, W144, W145, W153, W154, W162, W163, W170, W175, W176, W185, W200 | Aluminum Oxide | Vitrified Clay | 1 1/2" | Red | 60 (Rough) | 4524A11 | 000000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
1/8" Diameter Shank, 1/4" Diameter Shank | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 100 | Foam Block Stand; Five each: A1, A3, A4, A11, A12, A24, A38, W164, W185, W220, with 1/4" Shank; Five each: B42, B44, B52, B53, B111, B131, W144, W154, W163, W185, with 1/8" shank | Aluminum Oxide | Vitrified Clay | 1 1/2" | Orange | 60 (Rough) | 4559A21 | 000000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
1/4" Diameter Shank | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 18 | Foam Block Stand; Three each: A3, A5, A11, A12, W207, W220 | Aluminum Oxide | Vitrified Clay | 1 1/2" | Blue | 60 (Rough) | 4393A51 | 00000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 20 | Dressing Stone; One each: A24, B42, B51, B52, B54, B61, B90, B91, B102, B111, B112, B121, B122, B123, B131, B135, W185, W201, W202, W203 | Aluminum Oxide | Vitrified Clay | 1 1/2" | Red | 80 (Smooth) | 4524A15 | 00000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 50 | Foam Block Stand; Five each: A2, A5, A12, A37, A38, W185, W186, W187, W205, W219 | Aluminum Oxide | Vitrified Clay | 1 1/2" | Red | 36 (Rough) | 8718A125 | 000000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 50 | Foam Block Stand; Five each: A2, A5, A12, A37, A38, W185, W186, W187, W205, W219 | Aluminum Oxide | Vitrified Clay | 1 1/2" | Red | 60 (Rough) | 8718A12 | 000000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
For Steel, Aluminum, and Iron | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
1/8" Diameter Shank | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 36 | Cardboard Block Stand; Three each 100 Grit: B53, W163, W182; Three each 60 Grit: B52, W185; Three each 80 Grit: B52, B53, B122, W163, W182, W185 | Aluminum Oxide | Vitrified Ceramic | 1 1/2" | Blue, Pink | 60 (Rough), 80 (Smooth), 100 (Smooth) | 6165A15 | 00000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
For Steel, Stainless Steel, Aluminum, Brass, Bronze, Copper, Iron, and Nickel | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
1/8" Diameter Shank | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 72 | Cardboard Block Stand; B121 (14 total, 60-240 grit); B132 (9 total, 60-80 grit); B52 (16 total, 60-240 grit); W154 (9 total, 60-100 grit); W182 (9 total, 60-80 grit); W185 (15 total, 60-240 grit) | Aluminum Oxide, Aluminum Oxide/Cotton Laminate Blend, Ceramic, Nylon Mesh/Aluminum Oxide, Nylon Mesh/Silicon Carbide | Rubber, Synthetic Resin, Vitrified Ceramic | 1 1/2" | Black, Blue, Brown, Gray, Pink, White | 60 (Rough), 80 (Smooth), 100 (Smooth) | 6165A16 | 000000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Rotary Tool Engraving Bit Kits for Dremel Grinders
 |
For engraving and carving, these kits contain a variety of Dremel-compatible bits.
No. of Pieces | For Mfr. Model No. | Includes | Each | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
1/8" Diameter Shank | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 11 | 100, 100-N/7, 200, 3000, 3000-1/24, 7760-N/10, 8220, 8220-1/28, 8240, 8250, 8260 | Four Engraving Cutters, Seven Grinding Bits, Plastic Storage Case | 4757N11 | 000000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Grinding and Polishing Kits for 3D Printed Parts
 |
Finish the edges of metal, polymer, and plastic 3D printed parts with the bits, burs, wheels, and brushes in these kits.
Caution: As bit shank is exposed beyond 1/2", maximum safe rpm decreases significantly. Refer to ANSI standard B7.1. Use only accessories that have a greater rpm rating than the maximum speed of the grinder you choose.
No. of Pieces | Includes | Max. Rotation Speed, rpm | Abrasive Material | Grit (Surface Texture) | Each | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Aluminum, Brass, Bronze, Copper, Fiberglass, Iron, Nickel, Plastic, Rubber, Stainless Steel, Steel, and Titanium | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
3/32" Diameter Shank | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 25 | Three Diamond Grinding Bits, Three Carbide Burs, Two Aluminum Oxide Polishing Bobs, Two Aluminum Oxide Grinding Wheels, One Diamond Cutoff Wheel, One Mandrel with 3/32" Shank, Three Engraving Cutters, Eight Aluminum Oxide Wheel Brushes, Two Silicon Carbide Grinding Wheels, Metal Case | 21,000 | Aluminum Oxide, Carbide, Diamond, Silicon Carbide | 80 (Smooth) to 280 (Extra Smooth) | 4763N1 | 0000000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Rotary Tool Buffing and Polishing Kits for Dremel Grinders
 |
Buff, polish, and clean with these kits.
No. of Pieces | For Mfr. Model No. | Includes | Each | ||
|---|---|---|---|---|---|
| 20 | 100, 100-N/7, 200, 3000, 3000-1/24, 7760-N/10, 8220, 8220-1/28, 8240, 8250, 8260 | Six Buffing Wheels—1/2" Dia. Five Buffing Wheels—1" Dia. Cup-Style Polishing Brush—1/2" Brush Dia. × 1/8" Shank Dia. End-Style Polishing Brush—1/8" Brush Dia. × 1/8" Shank Dia. Two Wheel-Style Polishing Brushes—3/4" Brush Dia. × 1/8" Shank Dia. Polishing Bob—3/8" Head Dia. Polishing Bob with 1/8" Shank—1/2" Head Dia. Slotted-Head Mandrel—1/8" Shank Dia. Spiral Mandrel—1/8" Shank Dia. Polishing Compound Plastic case | 4742N11 | 000000 |
Bur Sets
5-Piece Sets with 1/8" Diameter Shank
 |
Wood Box |
Double-Cut Tooth—Double-cut tooth burs are for rapid metal removal with a coarser finish than single cut.
Single-Cut Tooth—Single-cut tooth burs are for gradual metal removal with a fine finish.
Double-Cut Tooth (Medium Grit) | Single-Cut Tooth (Fine Grit) | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Includes | Overall Lg. | For Use On | Each | Each | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Carbide | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Wood Box | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Cylinder-Shape Flat-Tip SA-51 Bur—1/4" Head Dia. × 1/2" Head Lg. Cylinder-Shape Rounded-Tip SC-51 Bur—1/4" Head Dia. × 1/2" Head Lg. Tree-Shape Pointed-Tip SG-51 Bur—1/4" Head Dia. × 1/2" Head Lg. Ball-Shape SD-51 Bur—1/4" Head Dia. × 7/32" Head Lg. 22° Tapered Cone-Shape Pointed-Tip SM-51 Bur—1/4" Head Dia. × 1/2" Head Lg. | 1 11/16" to 2" | Steel, Hardened Steel, Tool Steel, Stainless Steel, Titanium, Iron, Nickel | 8177A22 | 000000 | 8177A21 | 000000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
9-Piece Sets with 1/8" Diameter Shank
 |
Wood Box |
Double-Cut Tooth—Double-cut tooth burs are for rapid metal removal with a coarser finish than single cut.
Single-Cut Tooth—Single-cut tooth burs are for gradual metal removal with a fine finish.
Double-Cut Tooth (Medium Grit) | Single-Cut Tooth (Fine Grit) | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Includes | Overall Lg. | For Use On | Each | Each | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Carbide | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Wood Box | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Cylinder-Shape Flat-Tip SA-51 Bur—1/4" Head Dia. × 1/2" Head Lg. Cylinder-Shape Flat Cutter-Tip SB-51 Bur—1/4" Head Dia. × 3/16" Head Lg. Cylinder-Shape Rounded-Tip SC-51 Bur—1/4" Head Dia. × 1/2" Head Lg. Tree-Shape Pointed-Tip SG-51 Bur—1/4" Head Dia. × 1/2" Head Lg. Tree-Shape Rounded-Tip SF-51 Bur—1/4" Head Dia. × 1/2" Head Lg. Ball-Shape SD-51 Bur—1/4" Head Dia. × 7/32" Head Lg. Oval/Egg-Shape SE-51 Bur—1/4" Head Dia. × 3/8" Head Lg. 10° Inverted Cone-Shape SN-51 Bur—1/4" Head Dia. × 1/4" Head Lg. 22° Tapered Cone-Shape Pointed-Tip SM-51 Bur—1/4" Head Dia. × 1/2" Head Lg. | 1 11/16" to 2" | Steel, Hardened Steel, Tool Steel, Stainless Steel, Titanium, Iron, Nickel | 8177A11 | 000000 | 8177A13 | 000000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
12-Piece Sets with 1/8" Diameter Shank
 |
Wood Box |
Double-Cut Tooth—Double-cut tooth burs are for rapid metal removal with a coarser finish than single cut.
Single-Cut Tooth—Single-cut tooth burs are for gradual metal removal with a fine finish.
Double-Cut Tooth (Medium Grit) | Single-Cut Tooth (Fine Grit) | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Includes | Overall Lg. | For Use On | Each | Each | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Carbide | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Wood Box | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Cylinder-Shape Flat-Tip SA-42 Bur—3/32" Head Dia. × 7/16" Head Lg. Cylinder-Shape Flat-Tip SA-43 Bur—1/8" Head Dia. × 9/16" Head Lg. Cylinder-Shape Rounded-Tip SC-42 Bur—1/8" Head Dia. × 9/16" Head Lg. Tree-Shape Pointed-Tip SG-41 Bur—1/8" Head Dia. × 1/4" Head Lg. Tree-Shape Rounded-Tip SF-41 Bur—1/8" Head Dia. × 1/4" Head Lg. Tree-Shape Rounded-Tip SF-42 Bur—1/8" Head Dia. × 1/2" Head Lg. Ball-Shape SD-42 Bur—1/8" Head Dia. × 1/8" Head Lg. Flame-Shape SH-41 Bur—1/8" Head Dia. × 1/4" Head Lg. Oval/Egg-Shape SE-41 Bur—1/8" Head Dia. × 7/32" Head Lg. 10° Inverted Cone-Shape SN-42 Bur—1/8" Head Dia. × 3/16" Head Lg. 7° Tapered Cone-Shape Pointed-Tip SM-43 Bur—1/8" Head Dia. × 5/8" Head Lg. 8° Tapered Cone-Shape Rounded-Tip SL-41 Bur—1/8" Head Dia. × 3/8" Head Lg. | 1 1/2" | Steel, Hardened Steel, Tool Steel, Stainless Steel, Titanium, Iron, Nickel | 8177A12 | 000000 | 8177A14 | 000000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Mold Repair Kits
 |
Keep these kits on hand to repair damaged molds. They come with everything you need to smooth bumps, buff scratches, and shine surfaces.
No. of Pieces | Includes | For Use On | For Finish | Container Type | Each | ||
|---|---|---|---|---|---|---|---|
| 77 | Twenty Aluminum-Oxide Polishing Stones (100-1200 Grit) Nine Silicon-Carbide Polishing Stones (120-1200 Grit) One Polishing Stone Holder One 2 oz. Bottle of Lubricant Three Horse-Hair Polishing Brushes (Cup-Style)—1/4" Brush Dia. × 1/8" Shank Dia. Three Horse-Hair Polishing Brushes (End-Style)—1/4" Brush Dia. × 1/8" Shank Dia. Three Steel Polishing Brushes (End-Style)—1/4" Brush Dia. × 1/8" Shank Dia. Three Aluminum-Oxide Sanding Bits (60 Grit)—3/16" Head Dia. × 3/16" Head Lg. × 1/8" Shank Dia. Three Aluminum-Oxide Sanding Bits (60 Grit)—1/4" Head Dia. × 1/2" Head Lg. × 1/8" Shank Dia. Three Aluminum-Oxide Sanding Bits (120 Grit)—1/8" Head Dia. × 3/8" Head Lg. × 1/8" Shank Dia. Three Aluminum-Oxide Sanding Bits (120 Grit)—7/32" Head Dia. × 3/8" Head Lg. × 1/8" Shank Dia. One Aluminum-Oxide Belt Sanding Stick (320 Grit) Eleven Birch Wood Lapping Sticks Three 2 gram Syringes of Polished-Finish (2-22 Microns) Diamond Lapping Paste One 50 gram Tube of Mold Polish Three Polishing Bobs (Flat-Tip Cylinder) —1/4" Head Dia. × 3/8" Head Lg. × 1/8" Shank Dia. Three Polishing Bobs (Round-Tip Cone)—3/8" Head Dia. × 1/2" Head Lg. × 1/8" Shank Dia. Three Polishing Bobs (Bevel-Tip Rectangle)—1/4" Head Wd. × 1" Head Lg. × 1/8" Shank Dia. | Aluminum, Brass, Ceramic, Copper, Iron, Lead, Masonry, Plastic, Tin | Smooth, Extra Smooth, Polished | Plastic Case | 8376N11 | 0000000 |
Polishing Bob and Compound Kits
 |
Everything you need to polish small areas and hard-to-reach spots. These kits include polishing bobs in different shapes, sizes, and hardness ratings, along with buffing compounds. Use these bobs in a drill or grinder for bits and burs.
Most buffing processes have two steps, cutting and coloring.
1. Cutting removes scratches and surface imperfections.
2. Coloring produces an even finish.
Wool Felt—These bobs absorb and retain compounds better than synthetic felt bobs, so you don't need to reapply as often.
Synthetic Felt—These bobs have more pores than wool felt. For soft and medium bobs, the pores make the head squishy for squeezing into small spaces. For hard and extra hard bobs, the pores dissipate heat during aggressive polishing to extend the bobs’ life and prevent damage to your workpiece.
Soft—Create the finest finish and polish delicate materials.
Medium—Balance removing material with leaving a smooth finish.
Hard—For aggressive material removal.
Extra Hard—The most aggressive material removal. These bobs are also good for hard materials.
No. of Pieces | Hardness Rating | For Polishing Step | Includes | Container Type | Each | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Wool Felt | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 20 | Medium, Hard | Cutting, Coloring | One Medium Cylinder with Flat Tip Polishing Bob—1/2" Head Dia. × 1/2" Head Lg. × 1/8" Shank Dia. One Medium Cylinder with Round Tip Polishing Bob—1/2" Head Dia. × 1" Head Lg. × 1/8" Shank Dia. One Medium Ball Polishing Bob—1/2" Head Dia. × 1/2" Head Lg. × 1/8" Shank Dia. One Medium Oval Polishing Bob—1/2" Head Dia. × 1/2" Head Lg. × 1/8" Shank Dia. One Medium Pear Polishing Bob—1/2" Head Dia. × 3/4" Head Lg. × 1/8" Shank Dia. One Medium Cone with Flat Tip Polishing Bob—1/2" Head Dia. × 3/4" Head Lg. × 1/8" Shank Dia. One Medium Cone with Round Tip Polishing Bob—1/2" Head Dia. × 1" Head Lg. × 1/8" Shank Dia. Four Medium Flat-Edge Buffing Wheels—3/4" Dia. × 1/8" Thick. Four Hard Tapered-Edge Buffing Wheels—3/4" Dia. × 1/8" Thick. One 1/8" Dia. Shank for Buffing Wheels One 1/2 oz. Polished-Finish Black Cutting Compound One 1/2 oz. Extra-Smooth-Finish Brown Tripoli Cutting Compound One 1/2 oz. Polished-Finish Red Rouge Coloring Compound One 1/2 oz. Polished-Finish White Coloring Compound | Plastic Case | 4791A71 | 000000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 55 | Hard, Extra Hard | Cutting, Coloring | Three Extra-Hard Cylinder with Flat Tip Polishing Bobs—1/4" Head Dia. × 1/4" Head Lg. × 1/8" Shank Dia. Three Hard Cylinder with Flat Tip Polishing Bobs—1/4" Head Dia. × 1/4" Head Lg. × 1/8" Shank Dia. Four Extra-Hard Cylinder with Flat Tip Polishing Bobs—3/8" Head Dia. × 1/2" Head Lg. × 1/8" Shank Dia. Four Hard Cylinder with Flat Tip Polishing Bobs—3/8" Head Dia. × 1/2" Head Lg. × 1/8" Shank Dia. Four Extra-Hard Cylinder with Flat Tip Polishing Bobs—1/2" Head Dia. × 1/2" Head Lg. × 1/8" Shank Dia. Four Hard Cylinder with Flat Tip Polishing Bobs—1/2" Head Dia. × 1/2" Head Lg. × 1/8" Shank Dia. Four Extra-Hard Ball with Round Tip Polishing Bobs—1/2" Head Dia. × 1/2" Head Lg. × 1/8" Shank Dia. Four Hard Ball with Round Tip Polishing Bobs—1/2" Head Dia. × 1/2" Head Lg. × 1/8" Shank Dia. Three Extra-Hard Ball with Round Tip Polishing Bobs—3/4" Head Dia. × 3/4" Head Lg. × 1/4" Shank Dia. Three Hard Ball with Round Tip Polishing Bobs—3/4" Head Dia. × 3/4" Head Lg. × 1/4" Shank Dia. Four Extra-Hard Cone with Round Tip Polishing Bobs—1/2" Head Dia. × 1" Head Lg. × 1/8" Shank Dia. Four Hard Cone with Round Tip Polishing Bobs—1/2" Head Dia. × 1" Head Lg. × 1/8" Shank Dia. Three Extra-Hard Cone with Round Tip Polishing Bobs—3/4" Head Dia. × 1 1/2" Head Lg. × 1/4" Shank Dia. Three Hard Cone with Round Tip Polishing Bobs—3/4" Head Dia. × 1 1/2" Head Lg. × 1/4" Shank Dia. Three Hard Flat-Edge Buffing Wheels—1" Dia. × 1/4" Thk. One 1/2 oz. Polished-Finish Black Cutting Compound One 1/2 oz. Polished-Finish White Coloring Compound | Plastic Case | 4791A31 | 000000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 57 | Soft, Medium | Cutting, Coloring | Four Medium Cylinder with Flat Tip Polishing Bobs—1/4" Head Dia. × 1/4" Head Lg. × 1/8" Shank Dia. Four Soft Cylinder with Flat Tip Polishing Bobs—1/4" Head Dia. × 1/4" Head Lg. × 1/8" Shank Dia. Four Medium Cylinder with Flat Tip Polishing Bobs—3/8" Head Dia. × 1/2" Head Lg. × 1/8" Shank Dia. Four Soft Cylinder with Flat Tip Polishing Bobs—3/8" Head Dia. × 1/2" Head Lg. × 1/8" Shank Dia. Four Medium Cylinder with Flat Tip Polishing Bobs—1/2" Head Dia. × 1/2" Head Lg. × 1/8" Shank Dia. Four Soft Cylinder with Flat Tip Polishing Bobs—1/2" Head Dia. × 1/2" Head Lg. × 1/8" Shank Dia. Four Medium Ball with Round Tip Polishing Bobs—1/2" Head Dia. × 1/2" Head Lg. × 1/8" Shank Dia. Four Soft Ball with Round Tip Polishing Bobs—1/2" Head Dia. × 1/2" Head Lg. × 1/8" Shank Dia. Three Medium Ball with Round Tip Polishing Bobs—3/4" Head Dia. × 3/4" Head Lg. × 1/4" Shank Dia. Three Soft Ball with Round Tip Polishing Bobs—3/4" Head Dia. × 3/4" Head Lg. × 1/4" Shank Dia. Four Medium Cone with Round Tip Polishing Bobs—1/2" Head Dia. × 1" Head Lg. × 1/8" Shank Dia. Four Soft Cone with Round Tip Polishing Bobs—1/2" Head Dia. × 1" Head Lg. × 1/8" Shank Dia. Three Medium Cone with Round Tip Polishing Bobs—3/4" Head Dia. × 1 1/2" Head Lg. × 1/4" Shank Dia. Three Soft Cone with Round Tip Polishing Bobs—3/4" Head Dia. × 1 1/2" Head Lg. × 1/4" Shank Dia. Three Medium Flat-Edge Buffing Wheels—1" Dia. × 1/4" Thk. One 1/2 oz. Extra-Smooth-Finish Brown Tripoli Cutting Compound One 1/2 oz. Polished-Finish White Coloring Compound | Plastic Case | 4791A32 | 000000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 59 | Soft, Medium, Hard, Extra Hard | Cutting, Coloring | Three Extra-Hard Cylinder with Flat Tip Polishing Bobs—1/4" Head Dia. × 1/4" Head Lg. × 1/8" Shank Dia. Three Hard Cylinder with Flat Tip Polishing Bobs—1/4" Head Dia. × 1/4" Head Lg. × 1/8" Shank Dia. Three Medium Cylinder with Flat Tip Polishing Bobs—1/4" Head Dia. × 1/4" Head Lg. × 1/8" Shank Dia. Three Soft Cylinder with Flat Tip Polishing Bobs—1/4" Head Dia. × 1/4" Head Lg. × 1/8" Shank Dia. Four Extra-Hard Cylinder with Flat Tip Polishing Bobs—1/2" Head Dia. × 1/2" Head Lg. × 1/8" Shank Dia. Four Hard Cylinder with Flat Tip Polishing Bobs—1/2" Head Dia. × 1/2" Head Lg. × 1/8" Shank Dia. Four Medium Cylinder with Flat Tip Polishing Bobs—1/2" Head Dia. × 1/2" Head Lg. × 1/8" Shank Dia. Four Soft Cylinder with Flat Tip Polishing Bobs—1/2" Head Dia. × 1/2" Head Lg. × 1/8" Shank Dia. Four Extra-Hard Cone with Round Tip Polishing Bobs—1/2" Head Dia. × 1" Head Lg. × 1/8" Shank Dia. Four Hard Cone with Round Tip Polishing Bobs—1/2" Head Dia. × 1" Head Lg. × 1/8" Shank Dia. Four Medium Cone with Round Tip Polishing Bobs—1/2" Head Dia. × 1" Head Lg. × 1/8" Shank Dia. Four Soft Cone with Round Tip Polishing Bobs—1/2" Head Dia. × 1" Head Lg. × 1/8" Shank Dia. Three Extra-Hard Cone with Round Tip Polishing Bobs—3/4" Head Dia. × 1 1/2" Head Lg. × 1/4" Shank Dia. Three Hard Cone with Round Tip Polishing Bobs—3/4" Head Dia. × 1 1/2" Head Lg. × 1/4" Shank Dia. Three Medium Cone with Round Tip Polishing Bobs—3/4" Head Dia. × 1 1/2" Head Lg. × 1/4" Shank Dia. Three Soft Cone with Round Tip Polishing Bobs—3/4" Head Dia. × 1 1/2" Head Lg. × 1/4" Shank Dia. One 1/2 oz. Extra-Smooth-Finish Brown Tripoli Cutting Compound One 1/2 oz. Polished-Finish Black Cutting Compound One 1/2 oz. Polished-Finish White Coloring Compound | Plastic Case | 4791A33 | 000000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Synthetic Felt | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 35 | Soft | Coloring | Four Soft Cylinder with Flat Tip Polishing Bobs—3/8" Head Dia. × 1/2" Head Lg. × 1/8" Shank Dia. Three Soft Cylinder with Flat Tip Polishing Bobs—1/2" Head Dia. × 1/2" Head Lg. × 1/8" Shank Dia. Three Soft Cylinder with Flat Tip Polishing Bobs—1/2" Head Dia. × 1" Head Lg. × 1/8" Shank Dia. Four Soft Ball with Round Tip Polishing Bobs—3/8" Head Dia. × 3/8" Head Lg. × 1/8" Shank Dia. Three Soft Ball with Round Tip Polishing Bobs—1/2" Head Dia. × 1/2" Head Lg. × 1/8" Shank Dia. Two Soft Ball with Round Tip Polishing Bobs—3/4" Head Dia. × 3/4" Head Lg. × 1/8" Shank Dia. Four Soft Cone with Round Tip Polishing Bobs—3/8" Head Dia. × 1/2" Head Lg. × 1/8" Shank Dia. Three Soft Cone with Round Tip Polishing Bobs—1/2" Head Dia. × 3/4" Head Lg. × 1/8" Shank Dia. Two Soft Cone with Round Tip Polishing Bobs—3/4" Head Dia. × 1 1/8" Head Lg. × 1/8" Shank Dia. Three Soft Flat-Edge Buffing Wheels—5/8" Dia. × 1/4" Thk. Three Soft Flat-Edge Buffing Wheels—7/8" Dia. × 1/4" Thk. One 1/2 oz. Polished-Finish Vegetable-Based White Coloring Compound | Plastic Case | 4791A34 | 000000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 39 | Hard | Cutting, Coloring | Four Hard Cylinder with Flat Tip Polishing Bobs—1/4" Head Dia. × 1/4" Head Lg. × 1/8" Shank Dia. Four Hard Cylinder with Flat Tip Polishing Bobs—3/8" Head Dia. × 1/2" Head Lg. × 1/8" Shank Dia. Three Hard Cylinder with Flat Tip Polishing Bobs—1/2" Head Dia. × 1/2" Head Lg. × 1/8" Shank Dia. Three Hard Cylinder with Flat Tip Polishing Bobs—1/2" Head Dia. × 1" Head Lg. × 1/8" Shank Dia. Three Hard Ball with Round Tip Polishing Bobs—1/4" Head Dia. × 1/4" Head Lg. × 1/8" Shank Dia. Three Hard Ball with Round Tip Polishing Bobs—3/8" Head Dia. × 3/8" Head Lg. × 1/8" Shank Dia. Three Hard Ball with Round Tip Polishing Bobs—1/2" Head Dia. × 1/2" Head Lg. × 1/8" Shank Dia. Two Hard Ball with Round Tip Polishing Bobs—3/4" Head Dia. × 3/4" Head Lg. × 1/8" Shank Dia. Four Hard Cone with Round Tip Polishing Bobs—3/8" Head Dia. × 1/2" Head Lg. × 1/8" Shank Dia. Three Hard Cone with Round Tip Polishing Bobs—1/2" Head Dia. × 3/4" Head Lg. × 1/8" Shank Dia. Two Hard Cone with Round Tip Polishing Bobs—3/4" Head Dia. × 1 1/8" Head Lg. × 1/8" Shank Dia. Three Hard Flat-Edge Buffing Wheels—5/8" Dia. × 1/4" Thk. One 1/2 oz. Polished-Finish Vegetable-Based Black Cutting Compound One 1/2 oz. Polished-Finish Vegetable-Based White Coloring Compound | Plastic Case | 4791A35 | 000000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 51 | Soft, Hard | Cutting, Coloring | Four Hard Cylinder with Flat Tip Polishing Bobs—3/8" Head Dia. × 1/2" Head Lg. × 1/8" Shank Dia. Four Soft Cylinder with Flat Tip Polishing Bobs—3/8" Head Dia. × 1/2" Head Lg. × 1/8" Shank Dia. Three Hard Cylinder with Flat Tip Polishing Bobs—1/2" Head Dia. × 1/2" Head Lg. × 1/8" Shank Dia. Three Soft Cylinder with Flat Tip Polishing Bobs—1/2" Head Dia. × 1/2" Head Lg. × 1/8" Shank Dia. Three Hard Ball with Round Tip Polishing Bobs—3/8" Head Dia. × 3/8" Head Dia. × 1/8" Shank Dia. Three Soft Ball with Round Tip Polishing Bobs—3/8" Head Dia. × 3/8" Head Dia. × 1/8" Shank Dia. Two Hard Ball with Round Tip Polishing Bobs—3/4" Head Dia. × 3/4" Head Lg. × 1/8" Shank Dia. Two Soft Ball with Round Tip Polishing Bobs—3/4" Head Dia. × 3/4" Head Lg. × 1/8" Shank Dia. Three Hard Cone with Round Tip Polishing Bobs—3/8" Head Dia. × 1/2" Head Lg. × 1/8" Shank Dia. Three Soft Cone with Round Tip Polishing Bobs—3/8" Head Dia. × 1/2" Head Lg. × 1/8" Shank Dia. Three Hard Cone with Round Tip Polishing Bobs—1/2" Head Dia. × 3/4" Head Lg. × 1/8" Shank Dia. Three Soft Cone with Round Tip Polishing Bobs—1/2" Head Dia. × 3/4" Head Lg. × 1/8" Shank Dia. Two Hard Cone with Round Tip Polishing Bobs—3/4" Head Dia. × 1 1/8" Head Lg. × 1/8" Shank Dia. Two Soft Cone with Round Tip Polishing Bobs—3/4" Head Dia. × 1 1/8" Head Lg. × 1/8" Shank Dia. Three Hard Flat-Edge Buffing Wheels—5/8" Dia. × 1/4" Thk. Three Soft Flat-Edge Buffing Wheels—5/8" Dia. × 1/4" Thk. Three Soft Flat-Edge Buffing Wheels—7/8" Dia. × 1/4" Thk. One 1/2 oz. Polished-Finish Vegetable-Based Black Cutting Compound One 1/2 oz. Polished-Finish Vegetable-Based White Coloring Compound | Plastic Case | 4791A36 | 000000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Rubber-Cushioned Abrasive Grinding Bit Sets for Metals
 |
The bits in this set have rubber blended into the abrasive, which cushions during grinding to produce a smooth to extra-smooth surface texture.
Caution: As bit shank is exposed beyond 1/2", maximum safe rpm decreases significantly. Refer to ANSI standard B7.1. Use only accessories that have a greater rpm rating than the maximum speed of the grinder you choose.
Aluminum oxide bits are for grinding hard metals.
Silicon carbide bits are for grinding soft metals.
Abrasive | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
No. of Pieces | Includes | Max. Rotation Speed, rpm | Material | Bond Material | Grit (Surface Texture) | Each | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
For Steel, Aluminum, Brass, and Bronze | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 126 | 30 Silicon Carbide and 10 Aluminum Oxide 15/16" Lg. × 1/4" Dia. Bits; 30 Silicon Carbide and 10 Aluminum Oxide 7/8" Dia. Tapered-Edge Discs; 30 Silicon Carbide and 10 Aluminum Oxide 7/8" Dia. × 1/8" Thick Straight Discs; Four 1/8" Dia. Mandrels; Two Spiral Mandrels with Hex Nut; Paper and Plastic Case | 21,000 | Aluminum Oxide, Silicon Carbide | Rubber | 120 (Smooth) to 240 (Extra Smooth) | 4772A16 | 000000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
For Steel, Stainless Steel, Aluminum, Brass, Bronze, Copper, Iron, Nickel, and Titanium | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 68 | 8 each: No. 4, No. 6, No. 8, No. 10, No. 11, No. 12, No. 14, and No. 15 Grinding Bits; Two No. 4 Mandrels; Two No. 6 Mandrels; Plastic case | 25,000 | Silicon Carbide | Rubber | 46 (Rough) to 240 (Extra Smooth) | 4772A13 | 000000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
For Steel, Aluminum, Brass, Copper, and Stainless Steel | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 24 | 8 each A2, A25, W220 Grinding Bits with 1 1/2" Lg. × 1/4" Dia. Shank; Cardboard Block Stand | 25,500 | Aluminum Oxide | Rubber | 46 (Rough) to 100 (Smooth) | 4772A17 | 000000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 36 | 12 each: B52, B121, W185 Grinding Bits with 1 1/2" Lg. × 1/8" Dia. Shank; Cardboard Block Stand | 34,500 | Aluminum Oxide | Rubber | 46 (Rough) to 100 (Smooth) | 4772A14 | 000000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
For Steel, Brass, Bronze, Copper, Stainless Steel, Iron, Nickel, and Titanium | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 63 | 15 each: B52, W154, W164, W185 Grinding Bits with 1 1/2" Lg. × 1/8" Dia. Shank; One W220 Grinding Bit with 1 1/2" Lg. × 1/4" Dia. Shank; Two W179 Grinding Bits with 1 1/2" Lg. × 1/4" Dia. Shank; Plastic case | 25,500 | Aluminum Oxide | Rubber | 46 (Rough) to 180 (Smooth) | 4772A18 | 000000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Miniature Multipurpose Grinding Bit Sets
 |
Best for intricate, precise grinding jobs on metal, ceramic, and plastic, these sets include diamond abrasive bits with different head shapes. Their 3/32” diameter shank and small head make them great for tasks with fine details.
Caution: As bit shank is exposed beyond 1/2", maximum safe rpm decreases significantly. Refer to ANSI standard B7.1. Use only accessories that have a greater rpm rating than the maximum speed of the grinder you choose.
Abrasive | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
No. of Pieces | Includes | Material | Bond Material | Grit (Surface Texture) | Each | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
For Steel, Stainless Steel, Aluminum, Brass, Bronze, Copper, Iron, Nickel, Titanium, Ceramic, and Plastic | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
3/32" Diameter Shank | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 6 | One Ball Grinding Bit with 1 1/2" Shank Lg., One Cone Grinding Bit with 1 1/2" Shank Lg., One Inverted Cone Grinding Bit with 1 1/2" Shank Lg., One Taper Grinding Bit with 1 3/8" Shank Lg., Two Cylindrical Grinding Bits with 1 1/4" Shank Lg., Plastic Block Stand | Diamond | Vitrified Ceramic | 120 (Smooth) Yellow | 5564N11 | 0000000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
 |
A rotary tool chuck connects these bits to rotary tools that accept a 1/8" shank diameter. Swap out accessories on your Dremel without tools.
For Shank Dia. | Mfr. Model No. | For Mfr. Model No. | Mounting Hole Thread Size | Body Material | Jaw Material | Each | ||
|---|---|---|---|---|---|---|---|---|
| 1/32" to 1/8" | 4486 | 100, 200, 212, 225, 275, 285, 300, 395, 398, 400, 575, 750, 770, 780, 800, 3000, 4000, 7700, 8050, 8200, 8220 | 1/4"-40 | Steel | Steel | 4344A38 | 000000 |
Miniature Grinding Bit and Disc Sets
 |
Sets contain an assortment of tools for grinding, sanding, and cutting on small surface areas. All have aluminum oxide bits for grinding hard metal.
Caution: As bit shank is exposed beyond 1/2", maximum safe rpm decreases significantly. Refer to ANSI standard B7.1. Use only accessories that have a greater rpm rating than the maximum speed of the grinder you choose.
58 Pieces—58-piece sets include diamond bits for grinding metal, ceramics, and plastics.
134 Pieces—134-piece sets include silicone carbide bits for grinding soft metal.
No. of Pieces | Includes | Max. Rotation Speed, rpm | Abrasive Material | Color | Each | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Steel, Stainless Steel, Aluminum, Brass, Bronze, Copper, Iron, Nickel, Titanium, Ceramic, and Plastic | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
1/8" Diameter Shank | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 58 | Six Aluminum Oxide Grinding Bits, Six Diamond Grinding Bits, 26 Cutoff Discs, One Collet, One Mandrel for Cutoff Discs, Six Cleaning Brushes, Six Engraving Cutters, Six Polishing Bobs, Plastic case | 21,000 | Aluminum Oxide, Diamond | Blue, Brown | 4475A12 | 000000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
For Steel, Aluminum, Brass, and Bronze | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
1/8" Diameter Shank | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 134 | Six Aluminum Oxide Grinding Bits, 16 Aluminum Oxide Sanding Bands, 36 Cutoff Wheels, 64 Cutoff Discs, Four Silicon Carbide Grinding Bits, One Mandrel for Cutoff and Sanding Discs, One Rubber Drum for Sanding Bands, Six Aluminum Oxide Grinding Discs, Plastic case | 30,000 | Aluminum Oxide, Silicon Carbide | Brown, Gray | 4475A13 | 00000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Bur Containers
Hazardous Location Upblast Roof-Mount Exhaust Fans
Direct Drive
 |
Direct-drive fans have fewer moving parts than belt-drive fans for less maintenance.
Exhaust Fans | Mounting Bases | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Overall | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Blade Dia. | Airflow @ SP | Volume (Sound) @ Distance | Motor Speed, rpm | Power, hp | Dia. | Ht. | Base Wd. | Wt., lb. | Max. Ambient Temp., ° F | Housing Material | Hazardous Location Rating | Each | Each | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Totally Enclosed Motor Enclosure | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
120/240V AC, Single Phase—Hardwire | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 24" | 3,900 ft³/min @ 1/2 in. H₂O 6,900 ft³/min @ 0 in. H₂O | 75 dBA @ 5 ft. | 1,150 | 3/4 | 33" | 25" | 36" | 340 | 100 | Steel | NEC Class I Divisions 1, 2 Groups C, D; NEC Class II Divisions 1, 2 Groups E, F, G | 4746N11 | 000000000 | 2230K66 | 0000000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 30" | 5,900 ft³/min @ 1/2 in. H₂O 9,350 ft³/min @ 0 in. H₂O | 72 dBA @ 5 ft. | 1,150 | 1 | 39" | 28" | 42" | 370 | 100 | Steel | NEC Class I Divisions 1, 2 Groups C, D; NEC Class II Divisions 1, 2 Groups E, F, G | 4746N12 | 00000000 | 2230K45 | 000000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
No-Mess Polishing Bob Assortments for Hard Metals
 |
Keep multiple shapes, sizes, and grits on hand to polish hard metals without any messy compounds. These bobs come embedded with long-lasting diamond abrasive—the hardest we offer. They’re best for cutting into stainless steel, titanium, and other tough materials. Use them to polish small areas and hard-to-reach spots with a drill or grinder for bits and burs. Grit is approximate. Labels in the lid include our part numbers, so it's easy to replenish the assortments.
Wool Felt—Softer than rubber, these bobs better conform to your work surface and prevent gouging. They're the best choice for final finishing steps.
No. of Pieces | Includes | Material | Container Type | Each | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Diamond Abrasive—For Stainless Steel, Titanium, Steel, Iron, and Nickel | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 24 | Three 600-Grit (Polished) Cone with Round Tip—3/8" Head Dia. × 1/2" Head Lg. × 1/8" Shank Dia. Three 600-Grit (Polished) Cylinder with Flat Tip—1/4" Head Dia. × 1/4" Head Lg. × 1/8" Shank Dia. Three 800-Grit (Polished) Cone with Round Tip—3/8" Head Dia. × 1/2" Head Lg. × 1/8" Shank Dia. Three 800-Grit (Polished) Cylinder with Flat Tip—1/4" Head Dia. × 1/4" Head Lg. × 1/8" Shank Dia. Three 1200-Grit (Polished) Cone with Round Tip—3/8" Head Dia. × 1/2" Head Lg. × 1/8" Shank Dia. Three 1200-Grit (Polished) Cylinder with Flat Tip—1/4" Head Dia. × 1/4" Head Lg. × 1/8" Shank Dia. Three 2000-Grit (Polished) Cone with Round Tip—3/8" Head Dia. × 1/2" Head Lg. × 1/8" Shank Dia. Three 2000-Grit (Polished) Cylinder with Flat Tip—1/4" Head Dia. × 1/4" Head Lg. × 1/8" Shank Dia. | Wool Felt | Plastic Case | 8394N11 | 0000000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
No-Mess Polishing Bob Assortments for Reciprocating Polishers
 |
Keep a variety of rectangular sizes and grits on hand to polish flat surfaces with a reciprocating polisher—no messy compounds required. These bobs are embedded with silicon carbide abrasive, which stays cool to prevent buildup. That makes them best for soft metals prone to clogging, such as aluminum. The abrasive also lets you cut fast without pressing hard. Their flat profile suits both large surfaces and straight, narrow spaces. The bobs have a beveled tip to polish on an angle. Grit is approximate. Labels in the lid include our part numbers, so it's easy to replenish the assortments.
Polyurethane Rubber—Harder than neoprene and wool felt, these bobs hold their shape longer, even during heavy use.
No. of Pieces | Includes | Material | Container Type | Each | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Silicon Carbide Abrasive—For Aluminum, Brass, Bronze, Copper, and Plastic | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 16 | Four 120-Grit (Smooth) Rectangle with Bevel Tip—1/2" Head Wd. × 1/2" Head Thk. × 1 1/2" Head Lg. × 1/8" Shank Dia. Four 120-Grit (Smooth) Rectangle with Bevel Tip—3/8" Head Wd. × 3/8" Head Thk. × 1 1/2" Head Lg. × 1/8" Shank Dia. Four 240-Grit (Extra Smooth) Rectangle with Bevel Tip—1/2" Head Wd. × 1/2" Head Thk. × 1 1/2" Head Lg. × 1/8" Shank Dia. Four 240-Grit (Extra Smooth) Rectangle with Bevel Tip—3/8" Head Wd. × 3/8" Head Thk. × 1 1/2" Head Lg. × 1/8" Shank Dia. | Polyurethane Rubber | Plastic Case | 8570N11 | 0000000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
No-Mess Polishing Bob Assortments for Soft Metals and Nonmetals
 |
Keep multiple shapes, sizes, and grits on hand to polish soft materials without any messy compounds. These bobs are embedded with silicon carbide abrasive, which generates minimal heat to reduce material buildup. That makes them best for polishing soft materials prone to clogging, such as aluminum. All cut fast and with light pressure. Use them to polish small areas and hard-to-reach spots with a drill or grinder for bits and burs. Grit is approximate. Labels in the lid include our part numbers, so it's easy to replenish the assortments.
Wool Felt—Softer than rubber, these bobs better conform to your work surface and prevent gouging. They're the best choice for final finishing steps.
No. of Pieces | Includes | Material | Container Type | Each | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Silicon Carbide Abrasive—For Aluminum, Brass, Bronze, Copper, and Plastic | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 33 | Four 400-Grit (Extra Smooth) Cone with Round Tip—1/2" Head Dia. × 1" Head Lg. × 1/8" Shank Dia. Four 400-Grit (Extra Smooth) Cylinder with Flat Tip—1/4" Head Dia. × 1/4" Head Lg. × 1/8" Shank Dia. Four 400-Grit (Extra Smooth) Cylinder with Flat Tip—3/4" Head Dia. × 3/4" Head Lg. × 1/8" Shank Dia. Four 600-Grit (Polished) Cone with Round Tip—1/2" Head Dia. × 1" Head Lg. × 1/8" Shank Dia. Four 600-Grit (Polished) Cylinder with Flat Tip—1/4" Head Dia. × 1/4" Head Lg. × 1/8" Shank Dia. Four 600-Grit (Polished) Cylinder with Flat Tip—3/4" Head Dia. × 3/4" Head Lg. × 1/8" Shank Dia. Four 800-Grit (Polished) Cone with Round Tip—1/2" Head Dia. × 1" Head Lg. × 1/8" Shank Dia. Four 800-Grit (Polished) Cylinder with Flat Tip—1/4" Head Dia. × 1/4" Head Lg. × 1/8" Shank Dia. Four 800-Grit (Polished) Cylinder with Flat Tip—3/4" Head Dia. × 3/4" Head Lg. × 1/8" Shank Dia. | Wool Felt | Plastic Case | 8459N11 | 0000000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Polishing Bob and Compound Kits for Reciprocating Polishers
 |
Everything you need to polish flat surfaces with a reciprocating polisher. These kits include polishing bobs in different sizes and hardness ratings, along with buffing compounds. The bobs have a flat profile that moves back and forth with the motion of the reciprocating polisher. They’re good for large surfaces or squeezing into narrow, linear spaces. Use the beveled tip to polish at an angle.
Most buffing processes have two steps, cutting and coloring.
1. Cutting removes scratches and surface imperfections.
2. Coloring produces an even finish.
Wool Felt—These bobs absorb and retain compounds better than synthetic felt bobs, so you don't need to reapply as often.
Medium—Balance removing material with leaving a smooth finish.
Hard—For aggressive material removal.
No. of Pieces | Hardness Rating | For Polishing Step | Includes | Container Type | Each | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Wool Felt | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 26 | Medium, Hard | Cutting, Coloring | Four Medium Rectangle with Bevel Tip Polishing Bobs—1/4" Head Wd. × 1/4" Head Thk. × 1 1/2" Head Lg. × 1/8" Shank Dia. Four Hard Rectangle with Bevel Tip Polishing Bobs—1/4" Head Wd. × 1/4" Head Thk. × 1 1/2" Head Lg. × 1/8" Shank Dia. Four Medium Rectangle with Bevel Tip Polishing Bobs—3/8" Head Wd. × 3/8" Head Thk. × 1 1/2" Head Lg. × 1/8" Shank Dia. Four Hard Rectangle with Bevel Tip Polishing Bobs—3/8" Head Wd. × 3/8" Head Thk. × 1 1/2" Head Lg. × 1/8" Shank Dia. Four Medium Rectangle with Bevel Tip Polishing Bobs—1/2" Head Wd. × 1/2" Head Thk. × 1 1/2" Head Lg. × 1/8" Shank Dia. Four Hard Rectangle with Bevel Tip Polishing Bobs—1/2" Head Wd. × 1/2" Head Thk. × 1 1/2" Head Lg. × 1/8" Shank Dia. One 1/2 oz. Smooth-Finish Gray Cutting Compound One 1/2 oz. Polished-Finish White Coloring Compound | Plastic Case | 8246N11 | 0000000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Grinding Bit Sets for Nonmetals
 |
Best for grinding composites, fiberglass, plaster, plastic, rubber, and wood without generating heat, these sets include a selection of our most popular tungsten carbide bits. The bits are also known as mounted points and die grinder bits.
Caution: As bit shank is exposed beyond 1/2", maximum safe rpm decreases significantly. Refer to ANSI standard B7.1. Use only accessories that have a greater rpm rating than the maximum speed of the grinder you choose.
No. of Pieces | Includes | Abrasive Material | Shank Lg. | Grit (Surface Texture) | Each | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Composites, Fiberglass, Plaster, Plastic, Rubber, and Wood | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
1/8" Diameter Shank | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 7 | 1 1/4" Dia. Cutoff Wheel, Barrel Grinding Bit, Disc Grinding Bit, Two Cylindrical Bits, Two Cone Bits | Tungsten Carbide | 7/8" | 36 (Rough) Bronze | 4764N12 | 0000000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 7 | 1 1/4" Dia. Cutoff Wheel, Barrel Grinding Bit, Disc Grinding Bit, Two Cylindrical Bits, Two Cone Bits | Tungsten Carbide | 7/8" | 50 (Rough) Bronze | 4764N11 | 000000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
