System of Measurement System of Measurement |
|---|
|
Diameter Diameter | Show |
|---|
|
Diameter Diameter | Hide |
|---|
For Use On For Use On |
|---|
|
|
Material Material |
|---|
|
For Use With For Use With |
|---|
|
Shape Shape |
|---|
 |  |
| Rod and Disc | Ball |
Mechanical Finish Mechanical Finish |
|---|
|
DFARS (Defense Acquisition Regulations Supplement) DFARS (Defense AcquisitionRegulations Supplement)  |
|---|
Tolerance Rating Tolerance Rating |
|---|
|
|
Heat Treatment Heat Treatment |
|---|
|
Shank Size Shank Size |
|---|
|
Hardness Hardness |
|---|
|
Tooth Material Tooth Material |
|---|
|
Overall Length Overall Length |
|---|
|
|
Certificate Certificate |
|---|
 | |
Finish Finish |
|---|
|
Appearance Appearance |
|---|
|
Yield Strength Yield Strength |
|---|
|
REACH (Registration, Evaluation, Authorization and Restriction of Chemicals) REACH (Registration,Evaluation, Authorization and Restriction of Chemicals) |
|---|
|
RoHS (Restriction of Hazardous Substances) RoHS (Restriction ofHazardous Substances) |
|---|
|
About Tool Steel
More
Inch Size Hollow-Core Cutters for Magnetic-Base Drills
Use these cutters with magnetic-base drills. You can also pair them with an arbor adapter (sold separately) when using a manual drill press or milling machine. Unlike drill bits, these cut only on the periphery of the hole and produce a solid slug. Also known as annular cutters.
High-speed steel cutters have a bright finish and are for general purpose cutting.
Titanium nitride (TiN) coated high-speed steel cutters last longer than uncoated high-speed steel.
Cobalt steel cutters offer better heat and abrasion resistance than high-speed steel.
Carbide-tipped steel cutters last longer than high-speed steel and cobalt steel cutters and are for high-volume cutting of difficult-to-machine materials. Note: These cutters are more sensitive to shock and vibration compared to other cutters and should not be used with Jancy magnetic-base drill model USA101.
Pilot pins align the cutter and eject the slug. They're also known as ejector pins.
Arbor adapter for straight spindle fits a drill chuck or an R8 collet on a milling machine.
Arbor adapters for Morse taper spindle are for use on a drill press.
Arbor adapters for carbide-tipped steel cutters come with a pilot pin.
For technical drawings and 3-D models, click on a part number.
(TiN)-Coated High-Speed
Steel, and Cobalt Steel
| For Cutter Diameter (For Cutter Material) | For Cutter Depth | Diameter | Each | |
For High-Speed Steel and Cobalt Steel | ||||
|---|---|---|---|---|
| 27/64"-17/32" (High-Speed Steel, Cobalt Steel) | 1" | 3/16" | 0000000 | 000000 |
For High-Speed Steel, Cobalt Steel and Carbide-Tipped Steel | ||||
| 27/64"-17/32" (High-Speed Steel, Cobalt Steel, Carbide-Tipped Steel) | 2" | 3/16" | 0000000 | 00000 |
| Shank Type | Morse Taper Number | For Machine Spindle Type | For Machine Spindle Morse Taper No. | Shank Dia. | Overall Lg. | For Shank Size | Each | |
For High-Speed Steel and Cobalt Steel | ||||||||
|---|---|---|---|---|---|---|---|---|
| Straight | __ | __ | __ | 3/4" | 5 1/8" | __ | 000000000 | 0000000 |
| Morse Taper | 2 | __ | __ | __ | 6 1/4" | __ | 000000000 | 00000 |
| Morse Taper | 3 | __ | __ | __ | 6 1/4" | __ | 000000000 | 000000 |
For Carbide-Tipped Steel | ||||||||
| __ | __ | Morse Taper | 2 | __ | 160mm | 3/4" | 00000000 | 000000 |
| __ | __ | Morse Taper | 3 | __ | 190mm | 3/4" | 00000000 | 000000 |
Multiple-Sheet Inch Size Hollow-Core Cutters for Magnetic-Base Drills
The geometry of these cutters allows you to cut aligned holes in multiple sheets at one time. Use them with magnetic-base drills. You can also pair them with an arbor adapter (sold separately) when using a manual drill press or milling machine. Unlike drill bits, these cut only on the periphery of the hole and produce a solid slug. They're also known as annular cutters.
Pilot pins align the cutter and eject the slug. They're also known as ejector pins.
Arbor adapter for straight spindle fits a drill chuck or an R8 collet on a milling machine.
Arbor adapters for Morse taper spindle are for use on a drill press.
For technical drawings and 3-D models, click on a part number.
Hardened Undersized High-Speed M2 Tool Steel Rods
- Yield Strength: Not Rated
- Hardness: Rockwell C60 (Very Hard)
These rods, also known as drill blanks, have an undersized diameter for machining your own jobbers'-length drill bits. They're hardened for increased abrasion and impact resistance. M2 tool steel offers a nice balance of wear resistance and machinability. It has a high molybdenum content, which allows it to maintain sharp cutting edges even at elevated temperatures.
For technical drawings and 3-D models, click on a part number.
Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.
| Dia. | Dia. Tolerance | Drill Bit Size | Lg. | Mechanical Finish | Straightness Tolerance | Each | |
| 1/2" | -0.0002" to 0" | 1/2" | 6" | Precision Ground | 0.012" per ft. | 00000000 | 000000 |
Hardened Oversized High-Speed M2 Tool Steel Rods
- Yield Strength: Not Rated
- Hardness: Rockwell C60 (Very Hard)
Also known as reamer blanks, these rods have an oversized diameter that allows for finishing to your exact requirements. They're hardened for increased abrasion and impact resistance. M2 tool steel offers a nice balance of wear resistance and machinability. It has a high molybdenum content, which allows it to maintain sharp cutting edges even at elevated temperatures.
For technical drawings and 3-D models, click on a part number.
Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.
| Dia. | Dia. Tolerance | Reamer Size | Lg. | Lg. Tolerance | Mechanical Finish | Straightness Tolerance | Each | |
| 0.5" | 0" to 0.0002" | 1/2" | 6" | -1/32" to 1/32" | Precision Ground | 0.012" per ft. | 00000000 | 000000 |
Tight-Tolerance High-Speed M2 Tool Steel Rods
- Yield Strength: 105,000 psi
- Hardness: Rockwell B110 (Hard)
- Heat Treatable: Yes
- Max. Hardness After Heat Treatment: Rockwell C66
- Specifications Met: ASTM A600
Also called drill rod, these precision-ground rods have a tight diameter tolerance and are held to a strict straightness tolerance. Use them for turning applications in your lathe. M2 tool steel offers a nice balance of wear resistance and machinability. It has a high molybdenum content, which allows it to maintain sharp cutting edges even at elevated temperatures.
For technical drawings and 3-D models, click on a part number.
Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.
3 ft. Lg. | ||||||
|---|---|---|---|---|---|---|
| Dia. | Dia. Tolerance | Heat Treatment | Mechanical Finish | Straightness Tolerance | Each | |
| 1/2" | -0.001" to 0.001" | Annealed (Softened) | Precision Ground | 0.005" per ft. | 00000000 | 0000000 |
Oversized High-Speed M2 Tool Steel Rods
- Yield Strength: 60,000 psi
- Hardness: Rockwell C30 (Hard)
- Heat Treatable: Yes
- Max. Hardness After Heat Treatment: Rockwell C66
An oversized diameter allows for finishing to your exact requirements. M2 tool steel offers a nice balance of wear resistance and machinability. It has a high molybdenum content, which allows it to maintain sharp cutting edges even at elevated temperatures. These rods are decarb-free for a uniform surface that will consistently accept heat treating.
For technical drawings and 3-D models, click on a part number.
Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.
Hardened High-Speed M42 Tool Steel
- Yield Strength: Not Rated
- Hardness: Rockwell C65 (Very Hard)
Also known as cobalt steel, this M42 tool steel maintains its hardness in high-speed cutting applications that generate intense heat. Use it to make tools for cutting extremely hard materials.
For technical drawings and 3-D models, click on a part number.
Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.
| Dia. | Dia. Tolerance | Lg. | Mechanical Finish | Each | |
| 1/2" | -0.0002" to 0" | 6" | Precision Ground | 0000000 | 000000 |
Wear-Resistant High-Speed M4 Tool Steel Rods
- Yield Strength: 60,000 psi
- Hardness: Rockwell C30 (Hard)
- Heat Treatable: Yes
- Max. Hardness After Heat Treatment: Rockwell C65
Made from powdered metal, M4 tool steel has a consistent microstructure that gives it outstanding resistance to wear and abrasion. It is comparable to CPM Rex M4. Use it for punches, dies, and high-speed cutting tools. These rods are decarb-free for a uniform surface that will consistently accept heat treating.
For technical drawings and 3-D models, click on a part number.
Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.
Tight-Tolerance Multipurpose Oil-Hardening O1 Tool Steel Rods
- Yield Strength: 50,000 psi
- Hardness: Rockwell B90 (Medium)
- Heat Treatable: Yes
- Max. Hardness After Heat Treatment:
Inch sizes: Rockwell C65
Metric sizes: Rockwell C62 - Specifications Met: ASTM A681
Ready for turning in a lathe, these rods are precision ground to a tight diameter tolerance. They’re also known as drill rod. Often used for dies, punches, and gauges, O1 tool steel is an oil-hardening material that resists wear and abrasion.
For technical drawings and 3-D models, click on a part number.
Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.
Hardened Tight-Tolerance Multipurpose Oil-Hardening O1 Tool Steel Rods
- Yield Strength: Not Rated
- Hardness: Rockwell C60 (Very Hard)
Hardened for increased abrasion and impact resistance, these precision-ground rods have a tight diameter tolerance and are ready for turning in your lathe. They’re also known as drill rod. Use them to make dies, punches, and gauges. O1 tool steel is an oil-hardening material that resists wear and abrasion.
For technical drawings and 3-D models, click on a part number.
Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.
Oversized Multipurpose Oil-Hardening O1 Tool Steel Rods and Discs
- Yield Strength: 50,000 psi
- Hardness: Rockwell B95 (Medium)
- Heat Treatable: Yes
- Max. Hardness After Heat Treatment: Rockwell C62
An oversized diameter allows for finishing to your exact requirements. Often used for dies, punches, and gauges, O1 tool steel is an oil-hardening material that resists wear and abrasion. These rods and discs are decarb-free for a uniform surface that will consistently accept heat treating.
If you don't see the size you're looking for, please specify a length under additional rod lengths.
For technical drawings and 3-D models, click on a part number.
Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.
To Order: Please specify length in increments of 0.25" within the range listed.
| Dia. | Dia. Tolerance | Mechanical Finish | Straightness Tolerance | Choose a Length | Per Inch | |
| 1/2" | 0.005" to 0.031" | Turned | 1/8" per 5 ft. | 13" to 90" | 0000000 | 00000 |
Tight-Tolerance Multipurpose Air-Hardening A2 Tool Steel Rods
Precision ground and held to a strict straightness tolerance, these rods are ready for turning in your lathe. They’re also known as drill rod. A2 tool steel is more wear resistant than O1 and it keeps a sharper cutting edge. This air-hardening material is widely used for punches, broaches, and dies.
For technical drawings and 3-D models, click on a part number.
Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.
- Yield Strength: See Table
- Hardness: See Table
- Heat Treatable: Yes
- Max. Hardness After Heat Treatment: See Table
- Specifications Met: ASTM A681
Oversized Multipurpose Air-Hardening A2 Tool Steel Rods and Discs
- Yield Strength: 55,000 psi
- Hardness: Rockwell B95 (Medium)
- Heat Treatable: Yes
- Max. Hardness After Heat Treatment: Rockwell C64
An oversized diameter allows for finishing to your exact requirements. A2 tool steel is more wear resistant than O1 and it keeps a sharper cutting edge. This air-hardening material is widely used for punches, broaches, and dies. These rods and discs are decarb-free for a uniform surface that will consistently accept heat treating.
If you don't see the size you're looking for, please specify a length under additional rod lengths.
For technical drawings and 3-D models, click on a part number.
Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.
| Dia. | Dia. Tolerance | Mechanical Finish | Straightness Tolerance | Specifications Met | Per Inch | |
| 1/2" | 0.005" to 0.032" | Turned | Not Rated | ASTM A681 | 0000000 | 00000 |
Hardened Tight-Tolerance Multipurpose Air-Hardening A2 Tool Steel Rods
- Yield Strength: Not Rated
- Hardness: Rockwell C60 (Very Hard)
Hardened for increased abrasion and impact resistance, these rods are precision ground with a tight diameter tolerance. Also known as drill rod, they're all set for turning applications in your lathe. A2 tool steel is more wear resistant than O1 and it keeps a sharper cutting edge. This air-hardening material is widely used for punches, broaches, and dies.
For technical drawings and 3-D models, click on a part number.
Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.
Tight-Tolerance Easy-to-Machine W1 Tool Steel Rods
- Yield Strength: 50,000 psi
- Hardness: Rockwell B95 (Medium)
- Heat Treatable: Yes
- Max. Hardness After Heat Treatment: Rockwell C65
- Specifications Met: ASTM A686
These rods, also called drill rod, are ground and held to strict diameter and straightness tolerances. They are ready to be turned in a lathe. With lower amounts of alloy elements than other tool steels, W1 offers excellent machinability. This water-hardening material is often used for hammers, files, taps, and reamers. These rods are decarb-free for a uniform surface that will consistently accept heat treating.
For technical drawings and 3-D models, click on a part number.
Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.
Tight-Tolerance Shock-Resistant S7 Tool Steel Rods
- Yield Strength: 55,000 psi
- Hardness: Rockwell B110 (Hard)
- Heat Treatable: Yes
- Max. Hardness After Heat Treatment: Rockwell C58
- Specifications Met: ASTM A681
The diameter on these rods is precision ground while the straightness is held to a strict tolerance. Also known as drill rod, they are ready for turning in a lathe. Often made into chisels, rivets, and punches, S7 tool steel can handle repeated impact without fracturing. It is an air-hardening material.
For technical drawings and 3-D models, click on a part number.
Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.
Oversized Shock-Resistant S7 Tool Steel Rods and Discs
- Yield Strength: 50,000 psi
- Hardness: Rockwell B90 (Medium)
- Heat Treatable: Yes
- Max. Hardness After Heat Treatment: Rockwell C55
- Specifications Met: ASTM A681
An oversized diameter allows for finishing to your exact requirements. Often made into chisels, rivets, and punches, S7 tool steel can handle repeated impact without fracturing. It is an air-hardening material. These rods and discs are decarb-free for a uniform surface that will consistently accept heat treating.
If you don't see the size you're looking for, please specify a length under additional rod lengths.
For technical drawings and 3-D models, click on a part number.
Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.
To Order: Please specify length in increments of 0.25" within the range listed.
| Dia. | Dia. Tolerance | Heat Treatment | Mechanical Finish | Straightness Tolerance | Choose a Length | Per Inch | |
| 1/2" | 0.005" to 0.015" | Annealed (Softened) | Turned | Not Rated | 13"-90" | 0000000 | 00000 |
Hardened Shock-Resistant S2 Tool Steel
- Yield Strength: 290,000 psi
- Hardness: Rockwell C55 (Very Hard)
- Specifications Met: ASTM A681
This S2 tool steel has been hardened for excellent strength and impact resistance. It has a tough core that resists breaking under shock loads.
For technical drawings and 3-D models, click on a part number.
Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.
| Dia. | Dia. Tolerance | Mechanical Finish | Pkg. Qty. | Pkg. | |
Mirror-Like | |||||
|---|---|---|---|---|---|
| 1/2" | -0.001" to 0.001" | Ground and Polished | 50 | 0000000 | 000000 |
Tight-Tolerance Wear-Resistant D2 Tool Steel Rods
- Yield Strength: 50,000 psi
- Hardness: Rockwell B110 (Hard)
- Heat Treatable: Yes
- Max. Hardness After Heat Treatment: Rockwell C62
- Specifications Met: ASTM A681
All set for turning in your lathe, these precision-ground rods are held to tight diameter and straightness tolerances. They’re also known as drill rod. The addition of nickel gives D2 tool steel better wear resistance than A2. This air-hardening material is often used for cutting blades, stamps, and forming dies.
For technical drawings and 3-D models, click on a part number.
Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.
Oversized Wear-Resistant D2 Tool Steel Rods and Discs
- Yield Strength: 50,000 psi
- Hardness: Rockwell B95 (Medium)
- Heat Treatable: Yes
- Max. Hardness After Heat Treatment: Rockwell C62
- Specifications Met: ASTM A681
An oversized diameter allows for finishing to your exact requirements. The addition of nickel gives D2 tool steel better wear resistance than A2. This air-hardening material is often used for cutting blades, stamps, and forming dies. These rods and discs are decarb-free for a uniform surface that will consistently accept heat treating.
If you don't see the size you're looking for, please specify a length under additional rod lengths.
For technical drawings and 3-D models, click on a part number.
Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.
To Order: Please specify length in increments of 0.25" within the range listed.
| Dia. | Dia. Tolerance | Heat Treatment | Mechanical Finish | Straightness Tolerance | Choose a Length | Per Inch | |
| 1/2" | 0.005" to 0.032" | Annealed (Softened) | Ground | 1/8" per 5 ft. | 13"-90" | 0000000 | 00000 |
Hardened Easy-to-Machine P20 Tool Steel
- Yield Strength: 101,000 psi
- Hardness: Rockwell C25 (Hard)
Furnished hardened, P20 tool steel is strong and easy to machine. It has the wear resistance and highly polishable surface needed to fabricate long-lasting molds and dies.
For technical drawings and 3-D models, click on a part number.
Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.
Oversized High-Temperature H13 Tool Steel Rods
- Yield Strength: 239,000 psi
- Hardness: Rockwell C20 (Hard)
- Heat Treatable: Yes
- Max. Hardness After Heat Treatment: Rockwell C54
- Specifications Met: ASTM A681
An oversized diameter on these rods allows for finishing to your exact requirements. Able to maintain good strength and wear resistance in high temperatures, H13 tool steel also resists cracking from repeated heating and cooling cycles. It's an air-hardening material that's widely used in die-casting applications.
If you don't see the size you're looking for, please specify a length under additional rod lengths.
For technical drawings and 3-D models, click on a part number.
Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.
To Order: Please specify length in increments of 0.25" within the range listed.
| Dia. | Dia. Tolerance | Heat Treatment | Choose a Length | Per Inch | |
| 1/2" | 0.015" to 0.093" | Annealed (Softened) | 13"-90" | 0000000 | 00000 |
Ultra-Wear-Resistant A11 Tool Steel
- Yield Strength: 239,000 psi
- Hardness: Rockwell C16 (Hard)
- Heat Treatable: Yes
- Max. Hardness After Heat Treatment: Rockwell C54
- Specifications Met: ASTM A681
Resistant to wear, abrasion, and chipping, A11 is a hard material that is often made into punches and stamping tools. These rods are decarb-free for a uniform surface that will consistently accept heat treating.
For technical drawings and 3-D models, click on a part number.
Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.
Hole Saws for Sheet Metal
with
Pilot Pin
Lower cutting depths than standard hole saws make these saws less likely to rip or tear while making smooth, burr-free cuts in sheets. Heat-treated high-speed steel teeth cut through aluminum, brass, bronze, and steel. Use these saws on a drill or drill press. An arbor (sold separately) is required.
Arbors with pilot drill guide your cut.
Arbors with pilot pin require a drilled pilot hole. Spring-loaded pilot pins push out the slug as you cut.
For technical drawings and 3-D models, click on a part number.
Hole Saw Kits for Sheet Metal
Lower cutting depths than standard hole saws make these saws less likely to rip or tear while making smooth, burr-free cuts in sheets. All saws are made entirely of heat-treated high-speed steel for cutting aluminum, brass, bronze, and steel. Attach hole saws to a drill or drill press with the included arbors.
For technical drawings and 3-D models, click on a part number.
| No. of Saws | Dia. | Cutting Dp. | Includes | Each | |
| 4 | 1/4", 3/8", 1/2", 3/4" | 1/4" | 3/8" Hex-Shank Arbor with Spring-Loaded Pilot Pin, Extra 1/8" Dia. Pilot Pin, Plastic Case | 0000000 | 000000 |
| 7 | 5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 3/4" | 1/4" | 3/8" Hex-Shank Arbor with Spring-Loaded Pilot Pin, Two Extra 1/8" Diameter Pilot Pins, Center Punch, Hex Wrench, Plastic Case | 0000000 | 00000 |