McMaster-Carr logo
    Filter by
    System of Measurement
    Overall Length
    Attribute Image
    Length Class
    Industrial Info Compare
    Length
    Point Angle
    Industrial Info Snippet
    Attribute Image
    Flute Direction
    Number of Flutes
    Sold As
    Screw Size
    Industrial Info Compare
    Export Control Classification Number (ECCN)
    Industrial Info Snippet
    DFARS Specialty Metals
    For Drill Bit Shank Type
    Industrial Info Compare
    Forward
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Print
    How can we improve?
    Comments
    E-mail address (if you would like a response)
    89 Products
    About Drill Bits
    industrial info icon

    Compare material, finish, length class, and decimal size equivalents.

    High-Speed Steel Drill Bits

    Image of Product. Front orientation. Drill Bits. High-Speed Steel Drill Bits, Extended Length, Round Shank.
    Image of Specification. Standard. Front orientation. Contains Border. Standard Point. For Metal.

    Extended Length

    Round Shank

    Standard

    Our basic drill bits are also the most versatile. Cut holes in a variety of metals, from the softest aluminum to the hardest steel.
    Extended Length—Drill through panels and thick workpieces with our longest bits. Their length is good for creating deep holes but makes them less rigid than other bits. As a result, they are more prone to wobbling or breaking, especially when drilling hard materials.
    Black Oxide—The dark finish increases wear resistance and reduces friction to improve chip flow, so these bits can last 50% longer than uncoated bits.
    Titanium Nitride (TiN) Coated—Drill at higher speeds and last longer than uncoated and oxide-coated bits, especially on tough materials like hardened steel and nickel.
    Uncoated—The most economical option, uncoated bits perform best when used on low-carbon steel and aluminum. Polished to reduce friction, they're also known as bright finish bits.
    Shank
    Drill Bit
    Size
    Decimal Size
    Equiv.
    Overall
    Lg.
    Max. Drilling
    Dp.
    Type
    Size
    Drill Bit
    Point Type
    Each
    Extended Length
     
    Black Oxide
    7/64"
    		0.1094"
    		8"5.33"Round
    		7/64"Standard
    		00000000000000
    9/64"
    		0.1406"
    		8"5.28"Round
    		9/64"Standard
    		0000000000000
    11/64"
    		0.1719"
    		8"5.24"Round
    		11/64"Standard
    		0000000000000
    15/64"
    		0.2344"
    		8"5.14"Round
    		15/64"Standard
    		0000000000000
    17/64"
    		0.2656"
    		8"5.1"Round
    		17/64"Standard
    		0000000000000
    19/64"
    		0.2969"
    		8"5.05"Round
    		19/64"Standard
    		0000000000000
    21/64"
    		0.3281"
    		8"5"Round
    		21/64"Standard
    		0000000000000
    23/64"
    		0.3594"
    		8"4.96"Round
    		23/64"Standard
    		0000000000000
    25/64"
    		0.3906"
    		8"4.91"Round
    		25/64"Standard
    		0000000000000
    33/64"
    		0.5156"
    		8"3.97"Round
    		33/64"Standard
    		00000000000000
    17/32"
    		0.5313"
    		8"3.95"Round
    		17/32"Standard
    		00000000000000
     
    Titanium Nitride (TiN) Coated
    17/32"
    		0.5313"
    		8"4.75"Round
    		17/32"Standard
    		00000000000000
     
    Uncoated
    1/8"
    		0.125"
    		8"5.75"Round
    		1/8"Standard
    		0000000000000
    5/32"
    		0.1563"
    		8"5.68"Round
    		5/32"Standard
    		0000000000000
    3/16"
    		0.1875"
    		8"5.62"Round
    		3/16"Standard
    		0000000000000
    7/32"
    		0.2188"
    		8"5.56"Round
    		7/32"Standard
    		0000000000000
    1/4"
    		0.25"
    		8"5.5"Round
    		1/4"Standard
    		0000000000000
    9/32"
    		0.2813"
    		8"5.43"Round
    		9/32"Standard
    		0000000000000
    5/16"
    		0.3125"
    		8"5.37"Round
    		5/16"Standard
    		0000000000000
    11/32"
    		0.3438"
    		8"5.31"Round
    		11/32"Standard
    		0000000000000
    3/8"
    		0.375"
    		8"5.25"Round
    		3/8"Standard
    		0000000000000
    13/32"
    		0.4063"
    		8"5.18"Round
    		13/32"Standard
    		0000000000000
    7/16"
    		0.4375"
    		8"5.12"Round
    		7/16"Standard
    		0000000000000
    15/32"
    		0.4688"
    		8"5.06"Round
    		15/32"Standard
    		0000000000000
    1/2"
    		0.5"
    		8"5"Round
    		1/2"Standard
    		0000000000000
    17/32"
    		0.5313"
    		8"4.75"Round
    		17/32"Standard
    		000000000000
     

    Cobalt Steel Drill Bits

    Image of Product. Front orientation. Drill Bits. Cobalt Steel Drill Bits, Extended Length, Round Shank.
    Image of Specification. Split. Front orientation. Contains Border. Split Point. For Metal.

    Extended Length

    Round Shank

    Split

    Tough and wear resistant, cobalt steel bits last at least twice as long as high-speed steel. They can also run up to 25% faster at higher temperatures without being damaged on hard materials, such as nickel.
    Extended Length—Drill through panels and thick workpieces with our longest bits. Their length is good for creating deep holes but makes them less rigid than other bits. As a result, they are more prone to wobbling or breaking, especially when drilling hard materials.
    Uncoated—Polished to eject chips, these are also known as bright finish bits.
    Shank
    Drill Bit
    Size
    Decimal Size
    Equiv.
    Overall
    Lg.
    Max. Drilling
    Dp.
    Type
    Size
    Drill Bit
    Point Type
    Each
    Extended Length
     
    Uncoated
    3/32"
    		0.0938"
    		8"5.5"Round
    		3/32"Split
    		0000000000000
    1/8"
    		0.125"
    		8"5.5"Round
    		1/8"Split
    		000000000000
    5/32"
    		0.1563"
    		8"5.5"Round
    		5/32"Split
    		000000000000
    3/16"
    		0.1875"
    		8"5.5"Round
    		3/16"Split
    		000000000000
    1/4"
    		0.25"
    		8"5.5"Round
    		1/4"Split
    		000000000000
    17/64"
    		0.2656"
    		8"5.5"Round
    		17/64"Split
    		000000000000
    9/32"
    		0.2813"
    		8"5.5"Round
    		9/32"Split
    		000000000000
    5/16"
    		0.3125"
    		8"5.5"Round
    		5/16"Split
    		000000000000
    3/8"
    		0.375"
    		8"5.5"Round
    		3/8"Split
    		000000000000
    7/16"
    		0.4375"
    		8"5.5"Round
    		7/16"Split
    		000000000000
    17/32"
    		0.5313"
    		8"3.68"Round
    		17/32"Split
    		0000000000000
     

    Chip-Clearing High-Speed Steel Drill Bits

    Image of Product. Front orientation. Drill Bits. Chip-Clearing High-Speed Steel Drill Bits, Extended Length, Parabolic Flute, Round Shank.
    Image of Specification. Split. Front orientation. Contains Border. Split Point. For Metal.

    Extended Length

    Parabolic Flute

    Round Shank

    Split

    With flutes that lift chips out of the hole, you don't have to stop drilling to clear these bits manually. They improve coolant flow to dissipate heat and prevent clogs that can damage the bit and ruin the hole. High-speed steel is good for general purpose drilling in most metals.
    Parabolic Flute—A U-shaped groove on the flutes cuts faster and clears chips more quickly than high-helix bits, so these are better for drilling deeper holes.
    Extended Length—Drill through panels and thick workpieces with our longest bits. Their length is good for creating deep holes but makes them less rigid than other bits. As a result, they are more prone to wobbling or breaking, especially when drilling hard materials.
    Uncoated—The most economical option, uncoated bits perform best when used on low-carbon steel and aluminum. Polished to reduce friction, they're also known as bright finish bits.
    Shank
    Drill Bit
    Size
    Decimal Size
    Equiv.
    Overall
    Lg.
    Max. Drilling
    Dp.
    Flute
    Type
    Type
    Size
    Drill Bit
    Point Type
    Each
    Extended Length
     
    Uncoated
    1/8"
    		0.125"
    		8"5.75"ParabolicRound
    		1/8"Split
    		00000000000000
    9/64"
    		0.1406"
    		8"5.71"ParabolicRound
    		9/64"Split
    		0000000000000
    5/32"
    		0.1563"
    		8"5.68"ParabolicRound
    		5/32"Split
    		0000000000000
    11/64"
    		0.1719"
    		8"5.65"ParabolicRound
    		11/64"Split
    		0000000000000
    3/16"
    		0.1875"
    		8"5.62"ParabolicRound
    		3/16"Split
    		0000000000000
    13/64"
    		0.2031"
    		8"5.59"ParabolicRound
    		13/64"Split
    		0000000000000
    7/32"
    		0.2188"
    		8"5.56"ParabolicRound
    		7/32"Split
    		0000000000000
    15/64"
    		0.2344"
    		8"5.53"ParabolicRound
    		15/64"Split
    		0000000000000
    1/4"
    		0.25"
    		8"5.5"ParabolicRound
    		1/4"Split
    		0000000000000
    17/64"
    		0.2656"
    		8"5.46"ParabolicRound
    		17/64"Split
    		0000000000000
    9/32"
    		0.2813"
    		8"5.43"ParabolicRound
    		9/32"Split
    		0000000000000
    5/16"
    		0.3125"
    		8"5.37"ParabolicRound
    		5/16"Split
    		0000000000000
    21/64"
    		0.3281"
    		8"5.34"ParabolicRound
    		21/64"Split
    		0000000000000
    11/32"
    		0.3438"
    		8"5.31"ParabolicRound
    		11/32"Split
    		0000000000000
    3/8"
    		0.375"
    		8"5.25"ParabolicRound
    		3/8"Split
    		0000000000000
    25/64"
    		0.3906"
    		8"5.21"ParabolicRound
    		25/64"Split
    		0000000000000
    7/16"
    		0.4375"
    		8"5.12"ParabolicRound
    		7/16"Split
    		0000000000000
    1/2"
    		0.5"
    		8"5"ParabolicRound
    		1/2"Split
    		0000000000000
     

    Carbide-Tipped Drill Bits for Masonry and Concrete

    Crush rather than cut material so bits don’t jam or overheat while drilling masonry and concrete. The ultra-hard carbide tip breaks masonry into pieces and the widely spaced flutes channel them out of the hole. These bits stay sharp, resisting wear and heat that will dull or break other bits.
    SDS-Plus Shank for Hammer and Rotary Drilling
    Image of Product. Front orientation. Drill Bits. Carbide-Tipped Drill Bits for Masonry and Concrete, SDS-Plus Shank for Hammer and Rotary Drilling.
    Image of Specification. SDS-Plus Shank. Front orientation. SDS Plus Shank.

    SDS-Plus

    Shank

    The slotted shank fits SDS-Plus-drive rotary hammers, which rotate and hammer bits simultaneously to penetrate material. Also known as percussion or impact bits.
    Drill Bit
    Size
    Decimal Size
    Equiv.
    Overall
    Lg.
    Max. Drilling
    Dp.
    Specs. Met
    Each
    Uncoated
     
    Standard Point
    9/32"
    		0.2813"
    		8"6"ANSI B212.15000000000000
     
    Multipoint
    5/8"
    		0.625"
    		8"6"ANSI B212.15000000000000
    3/4"
    		0.75"
    		8"6"ANSI B212.15000000000000
    7/8"
    		0.875"
    		8"6"ANSI B212.15000000000000
    1"
    		1"
    		8"6"ANSI B212.15000000000000
    1 1/8"
    		1.125"
    		8"6"ANSI B212.15000000000000
     
    Round Shank for Hammer and Rotary Drilling
    Image of Product. Front orientation. Drill Bits. Carbide-Tipped Drill Bits for Masonry and Concrete, Round Shank for Hammer and Rotary Drilling.
    Use these bits in rotary hammers that have a drill chuck. Simultaneous rotary and hammering action drills faster and penetrates material with less pressure than rotary-only bits. Also known as percussion or impact bits.
    Drill Bit
    Size
    Decimal Size
    Equiv.
    Overall
    Lg.
    Max. Drilling
    Dp.
    Shank
    Size
    Specs. Met
    Each
    Uncoated
     
    Serrated Point
    3/16"
    		0.1875"
    		8"6"3/16"ANSI B212.15000000000000
    1/4"
    		0.25"
    		8"6"1/4"ANSI B212.15000000000000
     
    Hex Shank for Hammer and Rotary Drilling
    Image of Product. Front orientation. Drill Bits. Carbide-Tipped Drill Bits for Masonry and Concrete, Hex Shank for Hammer and Rotary Drilling.
    The hex shape is less likely to slip in the chuck than a round shank. Use simultaneous rotary and hammering action to drill faster and penetrate material with less pressure than rotary-only bits. Also known as percussion or impact bits.
    Drill Bit
    Size
    Decimal Size
    Equiv.
    Overall
    Lg.
    Max. Drilling
    Dp.
    Shank
    Size
    Specs. Met
    Each
    Uncoated
     
    Standard Point
    3/16"
    		0.1875"
    		8"6"11/64"ANSI B212.15000000000000
     

    Carbide-Tipped Drill Bits

    Image of Product. Front orientation. Drill Bits. Carbide-Tipped Drill Bits, Extended Length, Round Shank.
    Image of Specification. Standard. Front orientation. Contains Border. Standard Point. For Metal.

    Extended Length

    Round Shank

    Standard

    Performance similar to solid carbide but at a lower price point. Like carbide bits, these are stronger than cobalt and high-speed steel and maintain their sharp edges when drilling abrasive material. However, when drilling tough metals like iron and hardened steel, upgrade to carbide for longer life.
    Extended Length—Drill through panels and thick workpieces with our longest bits. Their length is good for creating deep holes but makes them less rigid than other bits. As a result, they are more prone to wobbling or breaking, especially when drilling hard materials.
    Shank
    Drill Bit
    Size
    Decimal Size
    Equiv.
    Overall
    Lg.
    Max. Drilling
    Dp.
    Type
    Size
    Drill Bit
    Point Type
    Each
    Extended Length
     
    Uncoated
    33/64"
    		0.5156"
    		8"3.98"Round
    		33/64"Standard
    		00000000000000
    17/32"
    		0.5313"
    		8"3.95"Round
    		17/32"Standard
    		0000000000000
     

    Carbide-Tipped Drill Bits for Hardened Steel

    Image of Product. Front orientation. Drill Bits. Carbide-Tipped Drill Bits for Hardened Steel, Jobbers' Length, Round Shank.

    Jobbers' Length

    Round Shank

    Straight flutes withstand the heavy pressure needed to penetrate hardened steel. These bits cut more aggressively and resist stress better than spiral-flute bits. A lower-priced alternative to solid carbide, they stay sharp when drilling abrasive material but won’t last as long.
    Jobbers' Length—These bits have the balance of rigidity and length needed for most applications.
    Shank
    Drill Bit
    Size
    Decimal Size
    Equiv.
    Overall
    Lg.
    Max. Drilling
    Dp.
    Type
    Size
    Drill Bit
    Point Type
    Each
    Jobbers' Length
     
    Uncoated
    3/4"
    		0.75"
    		8"3"Round
    		3/4"Notched
    		00000000000000
     

    Chip-Clearing Drill Bits for Wood

    Image of Product. Front orientation. Drill Bits. Chip-Clearing Drill Bits for Wood, Quick-Change Hex Shank.

    Quick-Change Hex Shank

    Prevent clogs that wear the bit and slow down drilling. The flutes on these bits have an open design that pulls chips out of the hole faster than standard spiral flutes. Also known as pole or ship auger bits, they are used to cut deep holes through lumber, railroad ties, and utility poles.
    Drill Bit
    Size
    Decimal Size
    Equiv.
    Overall
    Lg.
    Max. Drilling
    Dp.
    Shank
    Size
    Drill Bit
    Point Type
    Each
    Uncoated
     
    Quick-Change Hex Shank
    3/4"
    		0.75"
    		8"5"7/16"Screw
    		0000000000000
    7/8"
    		0.875"
    		8"5"7/16"Screw
    		000000000000
    1"
    		1"
    		8"5"7/16"Screw
    		000000000000
    1 1/4"
    		1.25"
    		8"5"7/16"Screw
    		000000000000
     

    Drill Bit Shank Adapters for Rotary Hammers

    Image of Product. For SDS-Plus-Shank Drill Bits and SDS Max Shanks. Front orientation. Drill Bit Shank Adapters. Drill Bit Shank Adapters for Rotary Hammers, For SDS-plus-Shank Drill Bits, SDS Max Shank.
    Image of Product. For SDS-Plus-Shank Drill Bits and Spline Shanks. Front orientation. Drill Bit Shank Adapters. Drill Bit Shank Adapters for Rotary Hammers, For SDS-plus-Shank Drill Bits, Spline Shank.

    For SDS-Plus-Shank Drill

    Bits and SDS Max Shanks

    For SDS-Plus-Shank Drill

    Bits and Spline Shanks

    Adapt your rotary hammer to fit a variety of masonry drill bit shank types.
    For Drill Bit
    Shank Type
    Shank
    Type
    Overall
    Lg.
    Material
    Each
    SDS Plus
    		SDS Max8"Steel000000000000000
    SDS Plus
    		Spline
    		8"Steel0000000000000

    Tapping Screw Installation Drill Bits for Masonry and Concrete

    Create an undersized hole so concrete tapping screws fit tightly once they're threaded into place. These bits are slightly smaller than the matching screw size. They have a carbide tip that resists wear and heat to stay sharp.
    SDS-Plus Shank for Hammer and Rotary Drilling
    Image of Product. Front orientation. Drill Bits. Tapping Screw Installation Drill Bits for Masonry and Concrete, SDS-Plus Shank for Hammer and Rotary Drilling.
    Image of Specification. SDS-Plus Shank. Front orientation. SDS Plus Shank.

    SDS-Plus

    Shank

    The slotted shank fits SDS-Plus-drive rotary hammers, which rotate and hammer bits simultaneously to penetrate material. Also known as percussion or impact bits.
    For Screw
    Size
    Drill Bit
    Size
    Decimal Size
    Equiv.
    Overall
    Lg.
    Max. Drilling
    Dp.
    Each
    Uncoated
     
    Standard Point
    5/8"
    		5/8"
    		0.625"
    		8"6"0000000000000
    3/4"
    		3/4"
    		0.75"
    		8"6"000000000000
    7/8"
    		7/8"
    		0.875"
    		8"6"000000000000
     

    Rebar-Cutting Carbide-Tipped Drill Bits

    No need to move the hole when you encounter rebar in concrete—swap out your masonry bit for one of these cutters. They have a carbide tip that resists wear to stay sharp. Once you're through the rebar, resume drilling with the masonry bit.
    SDS-Plus Shank for Rotary Only Drilling
    Image of Product. Front orientation. Drill Bits. Rebar-Cutting Carbide-Tipped Drill Bits, SDS-Plus Shank for Rotary Only Drilling.
    Image of Specification. SDS-Plus Shank. Front orientation. SDS Plus Shank.

    SDS-Plus

    Shank

    The hex shape reduces the chance of the shank slipping in the chuck. Pair these bits with hand-held power drills and hammer drills set to rotary-only mode. Because they use rotary action only, they require more pressure to grind up material than other bits.
    Drill Bit
    Size
    Decimal Size
    Equiv.
    Overall
    Lg.
    Max. Drilling
    Dp.
    Specs. Met
    Each
    Uncoated
     
    Standard Point
    3/8"
    		0.375"
    		8"6"ANSI B212.1500000000000000
     
    Round Shank for Rotary Only Drilling
    Image of Product. Front orientation. Drill Bits. Rebar-Cutting Carbide-Tipped Drill Bits, Round Shank for Rotary Only Drilling.
    Pair these bits with hand-held power drills and hammer drills set to rotary-only mode. Because bits rotate only, they require more pressure to grind up material than other bits.
    Drill Bit
    Size
    Decimal Size
    Equiv.
    Overall
    Lg.
    Max. Drilling
    Dp.
    Shank
    Size
    Specs. Met
    Each
    Uncoated
     
    Standard Point
    3/8"
    		0.375"
    		8"6"5/16"ANSI B212.1500000000000000
     

    Adjustable-Length Extensions for Quick-Change Hex-Shank Drill Bits

    Image of Product. Shown Fully Extended. Front orientation. Drill Bit Extensions. Adjustable-Length Extensions for Quick-Change Hex-Shank Drill Bits.

    Shown Fully Extended

    Adjust these extensions to the desired length. They have a quick-change mechanism for fast bit changes. Attach to the shank of a drill bit to extend its reach.
    For Drill Bit
    Shank Size
    Shank
    Size
    Overall Lg.
    OD
    Shank
    Material
    Body
    Material
    Each
    One-Piece Extensions
    1/4"1/4"8", 10", 12"3/4"SteelAluminum
    		0000000000000
     

    Carbide-Insert Drill Bits

    Image of Product. Shown with Carbide Inserts (Sold Separately). Front orientation. Contains Inset. Drill Bits. Carbide-Insert Drill Bits.

    Shown with Carbide Inserts

    (Sold Separately)

    When you need to drill dozens or even hundreds of holes, use a bit with replaceable carbide inserts. Once the cutting edges wear down, just change the inserts instead of sharpening or throwing the bit away. The holes in the bit channel coolant through the tool for more efficient chip evacuation. Also known as indexable drill bits.
    Each drill bit requires two inserts—one on the inner cutting edge and one on the outer cutting edge. Replacement inserts are sold separately.
    Drill Bits
    Replacement
    Insert Screws
    Shank
    For Insert
    Drill Bit
    Size
    Decimal Size
    Equiv.
    Overall
    Lg.
    Max. Drilling
    Dp.
    Type
    Size
    Drill Bit Point
    Type
    Inner Inscribed
    Circle Dia.
    Outer Inscribed
    Circle Dia.
    Each
    Each
    1 3/8"
    		1.375"
    		8"4.13"Round
    		1 1/2"Carbide Insert
    		0.402"0.419"00000000000000000000000000
     
    Drill Bit Inserts
    Image of Product. Front orientation. Drill Bit Inserts. Inner Inserts.
    Image of Product. Front orientation. Drill Bit Inserts. Outer Inserts.

    Inner Inserts

    Outer Inserts

    Image of Attribute. Inner Inserts. Front orientation. Contains Annotated, MultipleImages. Drill Bit Inserts. Inner Inserts.
    Image of Attribute. Outer Inserts. Front orientation. Contains Annotated, MultipleImages. Drill Bit Inserts. Outer Inserts.

    Inner Inserts

    Outer Inserts

    Each
    Package
    For Drill
    Bit Size
    IC
    Dia.
    Thk.
    Hole
    Dia.
    Tip
    Radius
    For Use On
    Features
    Each
    Pkg.
    Qty.
    Pkg.
    Inner Inserts
     
    Titanium Aluminum Nitride (TiAlN)-Coated Carbide
    1 1/4", 1 3/8"0.402"1/8"3/16"1/32"Aluminum, Brass, Bronze, Fiberglass, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel, Hardened SteelChip Breakers000000000000010000000000000000
     
    Outer Inserts
     
    Titanium Nitride (TiN)-Coated Carbide
    1 1/4", 1 3/8"0.419"1/8"3/16"1/32"Aluminum, Brass, Bronze, Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium, Tool Steel, Hardened SteelChip Breakers0000000000001000000000000000
     

    Strong-Hold Bit Screwdrivers

    Image of Product. Front orientation. Contains Inset. Screwdrivers. Strong-Hold Bit Screwdrivers.
    When locked into the chuck, these bits won't budge. Use these screwdrivers for high-torque applications, such as driving long screws into dense material.
    Pull back the chuck to insert a bit in the magnetic holder; push it forward to lock it in place. Bits store neatly inside the handle so you won't lose them.
    Steel—Best for dry environments, since moisture will cause it to rust.
    Ultra Grip—Designed for maximum comfort and control. The soft plastic coating and contoured shape reduce strain to prevent cramping and soreness during repetitive tasks. They also guarantee a secure grip.
    Shaft
    Bit
    No. of
    Sizes
    Sizes Included
    For Bit Hex
    Shank Size
    Overall
    Lg.
    Material
    Lg.
    Overall
    Wd.
    Material
    Holding Mechanism
    Grip
    Style
    Container
    Type
    Each
    6Phillips: No. 1, No. 2, No. 3
    Slotted: 3/16", 7/32", 1/4"    		1/4"8"Steel3 1/4"5/8"SteelQuick-Change ChuckUltra GripFabric Case0000000000000

    Fastener-Holding Nutdriver Bits

    Image of Product. Front orientation. Nutdriver Bits. Fastener-Holding Nutdriver Bits, Quick-Change Hex Shank.
    Image of Attribute. Front orientation. Contains Annotated.
    Image of Specification. External Hex. Front orientation. Contains Annotated.

    Quick-Change Hex

    Shank

    External

    Hex

    A mechanism inside the bit holds hex nuts and cap screws in place.
    Quick-Change Hex Shank—Quick-change hex shank bits have a groove in the shank and fit directly into power tools without an adapter. They offer more reach for recessed holes and less wobble compared to a hex shank bit used with an adapter.
    Magnet—Bits with magnet hold steel fasteners.
    Overall
    Drive
    Size
    Bolt
    Clearance
    Lg.
    Dia.
    Fastener-Holding
    Mechanism
    Material
    Each
    1/4" Quick-Change Hex Shank
    1/4"1/8"8"0.438"MagnetSteel000000000000
     

    Bit Screwdrivers

    Image of Product. Plain Grip. Front orientation. Screwdrivers. Bit Screwdrivers, Magnet Bit Holder, Plain Grip.

    Plain Grip

    Don't lug around a toolbox full of drivers—just swap out the bit to drive multiple screw sizes and styles with one tool. The ultimate space savers, these bit screwdrivers are a smart solution for on-the-go jobs.
    Black-Oxide Aluminum—One-third the weight of steel, with the corrosion resistance of stainless steel.
    Plain Grip—Made of hard plastic for durability.
    Shaft
    Bit
    No. of
    Sizes
    Sizes Included
    For Bit Hex
    Shank Size
    Overall
    Lg.
    Material
    Lg.
    Overall
    Wd.
    Material
    Holding
    Mechanism
    Grip
    Style
    Each
    6Phillips: No. 1, No. 2, No. 3
    Slotted: 3/16", 7/32", 1/4"    		1/4"8"Black-Oxide Aluminum4"13/32"SteelMagnetPlain0000000000000

    Nonmagnetic Bit Screwdrivers

    Image of Product. Plain Grip Retaining-Ring Bit Holder. Front orientation. Screwdrivers. Nonmagnetic Bit Screwdrivers , Retaining-Ring Bit Holder.

    Plain Grip Retaining-Ring Bit

    Holder

    Stop stray metal shavings from clogging your driver. A retaining ring or set screw holds the bits in place instead of a magnet. Carry these drivers from job to job to fasten multiple screw sizes and styles with one tool. Bits are not included.
    Steel—Best for dry environments, since moisture will cause it to rust.
    Plain Grip—Made of hard plastic for durability.
    Shaft
    For Bit Hex
    Shank Size
    Overall
    Lg.
    Material
    Lg.
    Overall
    Wd.
    Bit-Holding
    Mechanism
    Grip
    Style
    Each
    1/4"8"Steel3 7/8"3/8"Retaining RingPlain00000000000000
    back to top