McMaster-Carr logo
    Filter by
    System of Measurement
    For Hole Type
    Number of Pieces
    Chamfer Type
    Number of Drill Bits
    Pipe Size
    Industrial Info Snippet
    Shape
    Number of Taps
    Width
    Attribute Image
    Export Control Classification Number (ECCN)
    Industrial Info Snippet
    U.S.–Mexico–Canada Agreement (USMCA) Qualifying
    Industrial Info Compare
    DFARS Specialty Metals
    Industrial Info Compare
    Forward
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Print
    How can we improve?
    Comments
    E-mail address (if you would like a response)
    51 Products

    Tap, Die, and Drill Bit Sets

    Image of Product. Front orientation. Tap, Die, and Drill Bit Sets.
    Cut and repair threads and drill holes in many different sizes. Tap and die wrenches are included. The dies are hex shaped for use with conventional wrenches. The taps are made of carbon steel and are recommended for thread repair and occasional tapping.
    Taper Chamfer—Taper chamfer taps have 7-10 chamfered threads at the tip for cutting into the workpiece. They require less torque than other chamfer types, making them a good choice for starting threads and tapping through holes. However, a longer taper means that they cannot thread as close to the bottom of closed-end holes.
    Plug Chamfer—Plug chamfer taps are a versatile choice for most tapping applications. With 3-5 chamfered cutting threads, they require moderate torque and are often used for start-to-finish tapping of through holes and closed-end holes. However, they do not start threads as easily as taper chamfers. When using them to tap closed-end holes, be sure to leave sufficient space at the bottom for chips to accumulate.
    No. of
    Pieces
    Tap Sizes Included
    Die Sizes Included
    Drill Bit Sizes Included
    Container
    Type
    Includes
    Tap Chamfer
    Type
    Each
    Carbon Steel
     
    Right-Hand Thread
    1174-40, 6-32, 8-32, 10-24, 10-32, 12-24, 1/8"-27, 1/8"-28, 1/4"-20, 1/4"-28, 5/16"-18, 5/16"-24, 3/8"-16, 3/8"-24, 7/16"-14, 7/16"-20, 1/2"-13, 1/2"-20, M3 × 0.50 mm, M4 × 0.70 mm, M4 × 0.75 mm, M5 × 0.80 mm, M5 × 0.90 mm, M6 × 1.00 mm, M7 × 1.00 mm, M8 × 1.00 mm, M8 × 1.25 mm, M9 × 1.00 mm, M9 × 1.25 mm, M10 × 1.25 mm, M10 × 1.50 mm, M11 × 1.50 mm, M12 × 1.50 mm, M12 × 1.75 mm4-40, 6-32, 8-32, 10-24, 10-32, 12-24, 1/8"-27, 1/8"-28, 1/4"-20, 1/4"-28, 5/16"-18, 5/16"-24, 3/8"-16, 3/8"-24, 7/16"-14, 7/16"-20, 1/2"-13, 1/2"-20, M3 × 0.50 mm, M4 × 0.70 mm, M4 × 0.75 mm, M5 × 0.80 mm, M5 × 0.90 mm, M6 × 1.00 mm, M7 × 1.00 mm, M8 × 1.00 mm, M8 × 1.25 mm, M9 × 1.00 mm, M9 × 1.25 mm, M10 × 1.25 mm, M10 × 1.50 mm, M11 × 1.50 mm, M12 × 1.50 mm, M12 × 1.75 mm5/64", 7/64", 5/32", 1/4", 19/64", 5/16", 21/64", 3/8", 25/64", 13/32", 27/64", 29/64", 43 ga., 39 ga., 36 ga., 30 ga., 29 ga., 25 ga., 21 ga., 20 ga., 16 ga., 9 ga., 7 ga., 3 ga., B, F, H, I, J, O, Q, R, S, U, ZPlastic CaseDie Wrench (2), Extractor (5), Tap Wrench (3), Thread Gauge (2)Taper, Plug82955A110000000
     

    Chip-Clearing Tap and Drill Bit Sets for Through Holes

    Image of Product. Front orientation. Tap and Drill Bit Sets. Chip-Clearing Tap and Drill Bit Sets for Through Holes.
    Also known as gun taps, the taps in these sets have spiral-point flutes that push chips ahead of the tap and out of through holes. Because they don't need to be reversed to prevent buildup, they produce threads more efficiently than standard taps and are suitable for production work. Taps have a square shank for compatibility with tap wrenches and tap holders for drill presses and milling machines. With a plug chamfer, they have 3-5 chamfered cutting threads, so they're suitable for start-to-finish tapping. All taps and drill bits are made of high-speed steel for use on most metal and plastic.
    No. of
    Pieces
    Chamfer
    Type
    Tap Sizes
    Included
    Overall Lg.
    Thread
    Type
    No. of
    Flutes
    Pitch Dia.
    Limit
    Drill Bit Sizes
    Included
    Drill Bit Material
    Container
    Type
    Each
    Uncoated High-Speed Steel Tap
    18Plug6-32
    8-32
    10-24
    10-32
    1/4"-20
    5/16"-18
    3/8"-16
    7/16"-14
    1/2"-13    		2"
    2 1/8"
    2 3/8"
    2 1/2"
    2 23/32"
    2 15/16"
    3 5/32"
    3 3/8"    		UNC, UNF
    		2, 3H327/64"
    5/16"
    36 ga.
    29 ga.
    25 ga.
    21 ga.
    7 ga.
    F
    U    		Black-Oxide High-Speed SteelMetal Case27275A270000000
     

    Tap and Drill Bit Sets

    Image of Product. Front orientation. Tap and Drill Bit Sets. Tap and Drill Bit Sets, Metal Case.
    Image of Product. Front orientation. Tap and Drill Bit Sets. Tap and Drill Bit Sets, Plastic Pouch.

    Metal Case

    Plastic Pouch

    Drill and tap a variety of hole sizes. These taps and drill bits are for use on metal and plastic.
    Uncoated High-Speed Steel Tap—Uncoated high-speed steel taps have a longer tool life than carbon steel. They are strong enough for most jobs but don’t last as long as other high-speed steel taps. Use them for small-scale jobs.
    Uncoated Cobalt Steel Tap—Uncoated cobalt steel taps have higher strength and wear resistance than carbon steel and high-speed steel taps.
    Black-Oxide High-Speed Steel Tap—Black-oxide high-speed steel taps have a longer tool life than carbon steel. They cut with less friction than uncoated taps.
    Titanium Nitride (TiN)-Coated High-Speed Steel Tap—Titanium nitride (TiN)-coated high-speed steel taps have a longer tool life than carbon steel. They resist heat and wear better than uncoated taps, letting them last up to twice as long.
    Plug Chamfer—Plug-chamfer taps are a versatile choice for most tapping applications. With 3-5 chamfered cutting threads, they require moderate torque and are often used for start-to-finish tapping of through holes and closed-end holes. However, they do not start threads as easily as taper chamfers. When using them to tap closed-end holes, be sure to leave sufficient space at the bottom for chips to accumulate.
    Black-Oxide High-Speed Steel Drill Bit—Black-oxide high-speed steel drill bits have a longer tool life than carbon steel. They cut with less friction than uncoated drill bits.
    Black/Gold Oxide High-Speed Steel Drill Bit—Black/Gold-oxide high-speed steel drill bits have a longer tool life than carbon steel.
    Titanium Nitride (TiN)-Coated High-Speed Steel Drill Bit—Titanium nitride (TiN)-coated high-speed steel drill bits have a longer tool life than carbon steel. They last longer and can drill at higher speeds than uncoated and oxide-coated drill bits.
    Uncoated Cobalt Steel Drill Bit—Uncoated cobalt steel drill bits have higher strength and wear resistance than carbon steel and high-speed steel drill bits.
    Uncoated High-Speed Steel Drill Bit—Uncoated high-speed steel drill bits have a longer tool life than carbon steel. They are strong enough for most jobs but don’t last as long as other high-speed steel drill bits. Use them for small-scale jobs.
    No. of
    Pieces
    Chamfer
    Type
    Tap Sizes
    Included
    Overall Lg.
    Thread
    Type
    No. of
    Flutes
    Pitch Dia.
    Limit
    Drill Bit Sizes
    Included
    Drill Bit Material
    Container
    Type
    Each
    Uncoated High-Speed Steel Tap
    10Plug1 each of sizes:
    1/4"-20
     5/16"-18
    3/8"-16
    7/16"-14
    1/2"-13    		2 1/2"
    2 23/32"
    2 15/16"
    3 5/32"
    3 3/8"    		UNC
    		4Not Rated27/64"
    5/16"
    7 ga.
    F
    U    		Black-Oxide High-Speed SteelPlastic Pouch26175A72000000
    18Plug1 each of sizes:
    6-32
    8-32
    10-24
    10-32
    1/4-20
    5/16-18
    3/8-16
    7/16-14
    1/2-13    		2"
    2 1/8"
    2 3/8"
    2 1/2"
    2 23/32"
    2 15/16"
    3 5/32"
    3 3/8"    		UNC, UNF
    		3, 4H327/64"
    5/16"
    36 ga.
    29 ga.
    25 ga.
    21 ga.
    7 ga.
    F
    U    		Uncoated High-Speed SteelMetal Case2610A11000000
    36Plug1 each of sizes:
    6-32
    6-40
    8-32
    8-36
    10-24
    10-32
    12-24
    12-28
    1/4"-20
    1/4"-28
    5/16"-18
    5/16"-24
    3/8"-24
    3/8"-16
    7/16"-14
    7/16"-20
    1/2"-13
    1/2"-20    		2"
    2 1/8"
    2 5/32"
    2 11/64"
    2 3/8"
    2 1/2"
    2 15/16"
    3 5/32"
    3 7/32"    		UNC, UNF
    		3, 4H2, H31 each of sizes:
    25/64"
    27/64"
    29/64"
    5/16"
    36 ga.
    33 ga.
    25 ga.
    21 ga.
    16 ga.
    15 ga.
    7 ga.
    3 ga.
    F
    I
    Q
    U
    2 each of sizes:
    29 ga.    		Black-Oxide High-Speed SteelMetal Case2727A19000000
     
    Uncoated Cobalt Steel Tap
    18Plug1 each of sizes:
    6-32
    8-32
    10-24
    10-32
    1/4-20
    5/16-18
    3/8-16
    7/16-14
    1/2-13    		2"
    2 1/8"
    2 3/8"
    2 1/2"
    2 23/32"
    2 15/16"
    3 5/32"
    3 3/8"    		UNC, UNF
    		2, 3H327/64"
    5/16"
    36 ga.
    29 ga.
    25 ga.
    21 ga.
    7 ga.
    F
    U    		Uncoated Cobalt SteelMetal Case2610A13000000
     
    Black-Oxide High-Speed Steel Tap
    18Plug1 each of sizes:
    6-32
    8-32
    10-24
    10-32
    1/4-20
    5/16-18
    3/8-16
    7/16-14
    1/2-13    		2"
    2 1/8"
    2 3/8"
    2 1/2"
    2 23/32"
    2 15/16"
    3 5/32"
    3 3/8"    		UNC, UNF
    		3, 4H327/64"
    5/16"
    36 ga.
    29 ga.
    25 ga.
    21 ga.
    7 ga.
    F
    U    		Black/Gold Oxide High-Speed SteelMetal Case26175A11000000
     
    Titanium Nitride (TiN)-Coated High-Speed Steel Tap
    18Plug1 each of sizes:
    6-32
    8-32
    10-24
    10-32
    1/4-20
    5/16-18
    3/8-16
    7/16-14
    1/2-13    		2"
    2 1/8"
    2 3/8"
    2 1/2"
    2 23/32"
    2 15/16"
    3 5/32"
    3 3/8"    		UNC, UNF
    		3, 4H327/64"
    5/16"
    36 ga.
    29 ga.
    25 ga.
    21 ga.
    7 ga.
    F
    U    		Titanium Nitride (TiN)-Coated High-Speed SteelMetal Case26175A13000000
     

    Quick-Change Hex Shank Drill Tap Sets for Drills and Screwdrivers

    Image of Product. Fabric Pouch. Front orientation. Drill Taps. Quick-Change Hex Shank Drill Tap Sets for Drills and Screwdrivers, Spiral Flute, Fabric Pouch.

    Fabric Pouch

    Drill and tap holes in a range of diameters. With a drill bit point to drive into the workpiece, the taps in these sets can drill and tap holes in a single step. They also save you time when changing from tool to tool. The grooved shank snaps directly to drills, power screwdrivers, and other tools that accept a 1/4" hex shank. However, these taps aren’t rated for impact drivers. They’re made of high-speed steel and are for use on most metal and plastic.
    Recommended for use in through holes, these taps have a plug chamfer with 3-5 chamfered cutting threads, so they’re suitable for start-to-finish tapping.
    Spiral Flute—Taps with spiral flutes keep chips clear by drawing them back toward the tap and out of the hole.
    No. of
    Pieces
    Chamfer
    Type
    Tap Sizes Included
    Flute
    Type
    No. of
    Flutes
    Drill Bit Sizes Included
    Container
    Type
    Includes
    Each
    Uncoated High-Speed Steel
    7Plug6-32
    8-32
    10-24
    1/4"-20
    5/16"-18
    3/8"-16    		Spiral236 ga.
    29 ga.
    25 ga.
    7 ga.
    F
    5/16"    		Fabric PouchChuck3464A310000000
     
    Titanium Nitride (TiN)-Coated High-Speed Steel
    7Plug6-32
    8-32
    10-24
    1/4"-20
    5/16"-18
    3/8"-16    		Spiral236 ga.
    29 ga.
    25 ga.
    7 ga.
    F
    5/16"    		Fabric PouchChuck3464A33000000
     

    Helical Threaded Insert Assortments with Installation Tools

    Image of Product. Front orientation. Threaded Inserts. Helical Threaded Insert Assortments with Installation Tools.
    Repair damaged threads or create new ones. These convenient assortments include helical inserts, an installation tool for each thread size, a drill bit, and a tap. The inserts are also known as Heli-Coil inserts.
    Pronged—The prong attaches to an installation tool for precise control as you drive inserts in. Remove the prong with a punch or break-off tool before inserting a screw.
    18-8 Stainless Steel—The choice for wet and outdoor environments, these inserts resist rust and mild chemicals.
    No. of Inserts
    Included
    Includes
    Thread
    Spacing
    Drill Bit Size
    For Max. Hole Dia.
    Each
    Pronged
     
    18-8 Stainless Steel
    183/8"-16 Thread × 0.562" Installed Lg. (6 Each)
    3/8"-16 Thread × 3/4" Installed Lg. (6 Each)
    3/8"-16 Thread × 3/8" Installed Lg. (6 Each)
    Drill Bit
    Installation Tool
    Prong Break-Off Tool
    Through-Hole Tap    		Coarse
    		25/64"
    		0.391"91732A929000000
    541/4"-20 Thread × 3/8" Installed Lg. (12 Each)
    5/16"-18 Thread × 0.469" Installed Lg. (12 Each)
    3/8"-16 Thread × 0.562" Installed Lg. (12 Each)
    7/16"-14 Thread × 0.656" Installed Lg. (6 Each)
    1/2"-13 Thread × 3/4" Installed Lg. (6 Each)
    5/8"-11 Thread × 15/16" Installed Lg. (6 Each)
    Drill Bits
    Installation Tools
    Through-Hole Taps    		Coarse
    		17/64"
    21/64"
    25/64"
    29/64"
    17/32"
    21/32"
    		0.266"
    0.328"
    0.391"
    0.453"
    0.531"
    0.656"    		90285A121000000
     

    Thread-Locking Threaded Inserts with Installation Tools

    Image of Product. Front orientation. Threaded Inserts. Thread-Locking Threaded Inserts with Installation Tools.
    What you need to add or repair threads quickly in parts under stress or vibration. These inserts come with a closed-end tap, a drill bit, and an installation bit. Also known as E-Z Lok, they have Loctite® adhesive already applied, and the adhesive reaches full strength after 72 hours.
    Standard Wall—Stronger than thin-wall inserts, these are your go-to choice for threading most holes.
    Thin Wall—Use these inserts near the edge of workpieces or wherever you only have space for a small hole. They're also lighter than standard and extra-thick wall inserts for applications with strict weight limits.
    Black Phosphate-Coated Steel—These inserts resist occasional moisture.
    Thread
    Size
    For Tap Thread
    Size
    Installed
    Lg.
    Drill Bit
    Size
    For Max.
    Hole Dia.
    Drive
    Style
    No. of Inserts
    Included
    Each
    Standard Wall
     
    Black Phosphate-Coated Steel
    10-32
    		3/8"-16
    		0.406"5/16"
    		0.313"Slotted
    		1095109A110000000
    3/8"-16
    		9/16"-12
    		0.515"31/64"
    		0.484"Slotted
    		1095109A11300000
     
    Thin Wall
     
    Black Phosphate-Coated Steel
    1/4"-20
    		3/8"-16
    		0.375"Q
    		0.332"Slotted
    		1096015A11100000
    3/8"-16
    		1/2"-13
    		0.500"29/64"
    		0.453"Slotted
    		1096015A11300000
    M6 x 1 mm3/8"-16
    		0.375"Q
    		0.332"Slotted
    		1090025A11500000
     

    Threaded Rod and Stud Driver Bits

    Image of Product. Front orientation. Threaded Rod and Stud Driver Bits.
    Quickly install threaded rods and studs using a cordless drill, instead of doing it by hand. These driver bits have an opening that grips the rod without damaging its threads. Connect them to your drill using their quick-change hex shank, which has a groove to make it fit without needing an adapter. Do not use these bits with impact drivers because they could distort the threads on the rod.
    For Thread
    Size
    Overall
    Lg.
    Material
    Each
    1/4" Quick-Change Hex Shank
    3/8"-16
    		2 5/8"Steel
    		8012N11000000
     

    Quick-Change Hex Shank Drill Taps for Drills and Screwdrivers

    Image of Product. Front orientation. Drill Taps. Quick-Change Hex Shank Drill Taps for Drills and Screwdrivers.
    Save time when you need to change drill taps frequently. The grooved shank snaps directly into drills, power screwdrivers, and other tools that accept a 1/4" hex shank. However, these taps aren’t rated for impact drivers. With a drill bit point to drive into the workpiece, they can drill and tap holes in a single step. They’re made of high-speed steel and are for use on most metal and plastic.
    These taps have a plug chamfer with 3-5 chamfered cutting threads, so they’re suitable for start-to-finish tapping.
    Uncoated High-Speed Steel—Uncoated taps are strong enough for most tapping jobs but have the shortest tool life.
    Spiral Flute—Taps with spiral flutes keep chips clear by drawing them back toward the tap and out of the hole.
    Thread
    Drill Bit
    Plug Chamfer
    Size
    Lg.
    Overall
    Lg.
    Size
    Decimal Size
    Equiv.
    Point
    Angle
    Flute
    Type
    No. of
    Flutes
    Thread
    Type
    Pitch Dia.
    Limit
    Hex Shank
    Size
    Each
    Uncoated High-Speed Steel
    3/8"-16
    		1 1/8"3 15/16"5/16"
    		0.3125"118°Spiral2UNC
    		H31/4"3464A21000000
     
    Titanium Nitride (TiN)-Coated High-Speed Steel
    3/8"-16
    		1 1/8"3 15/16"5/16"
    		0.3125"118°Spiral2UNC
    		H31/4"3464A11900000
     

    Hex-Bit Taps

    Image of Product. Front orientation. Taps. Hex-Bit Taps.
    You only need one tool to turn these taps and install screws. The 1/4" hex shank fits hand or powered screwdrivers for threading holes. Then switch to a screwdriver bit to finish the job. To tap in hard-to-reach spots, add a bit extension. Taps have straight flutes that are good for most jobs.
    High-Speed Steel—The most versatile taps resist heat and wear to stay sharp. They’re good for most metals and plastic.
    Uncoated—The economical choice, these won't last as long as coated taps.
    Plug Chamfer—Our go-to chamfer type, these thread both through holes and blind holes. The tapered section is shorter than a taper chamfer and longer than bottoming chamfer. As a result, they're easier to turn than bottoming taps but require more force than taper taps.
    Drill Bit
    Plug Chamfer
    Thread
    Size
    Thread
    Lg.
    Overall
    Lg.
    Thread
    Type
    No. of
    Flutes
    Size
    Decimal Size
    Equiv.
    Shank
    Type
    Hex Shank
    Size
    Each
    High-Speed Steel
     
    Uncoated
    3/8"-16
    		13/16"1 19/32"UNC
    		45/16"
    		0.3125"Hex1/4"1021N13000000
     

    Friction Drill Bits for Tapping Sheet Metal

    Image of ProductInUse. Front orientation. ZoomedIn view. Contains Border. Friction Drill Bits.
    Image of Product. Front orientation. Friction Drill Bits.
    Friction heat from these bits melts through sheet metal to produce a hole with a raised lip in seconds. The lip is approximately three times the material thickness, providing enough thread engagement to tap directly into thin sheet metal. That eliminates the need for weld nuts, rivet nuts, or other inserts. Because friction drilling displaces material rather than cutting it, there are no chips to clean up. The formed bushing is also stronger than the original sheet. Pair these bits with a friction drill and a collet, sold separately. Use them on a drill press, milling machine, or CNC machine.
    Friction Drill Bits
    Friction
    Drill Collets
    For Hole
    Thread Size
    Dia.
    Shank Dia.,
    mm
    For Material
    Thk. Range
    Min. Rotation
    Speed, rpm
    Material
    Each
    Each
    3/8"-16
    		0.34"100.0394" to 0.0984"1,500Tungsten Carbide1643A2600000001643A613000000

    Drill Taps

    Image of Product. Front orientation. Drill Taps. Drill Taps, Spiral Flute.

    Spiral Flute

    Drill holes and cut threads without switching tools. Made of high-speed steel, these taps are for use on most metal and plastic. The square shank is compatible with tap holders for drill presses and milling machines. All have a plug chamfer with 3-5 chamfered cutting threads, so they're suitable for start-to-finish tapping.
    Uncoated High-Speed Steel—Uncoated taps are strong enough for most tapping jobs but have the shortest tool life.
    Spiral Flute—Taps with spiral flutes keep chips clear by drawing them back toward the tap and out of the hole.
    Thread
    Drill Bit
    Plug Chamfer
    Size
    Lg.
    Overall
    Lg.
    Size
    Decimal Size
    Equiv.
    Point
    Angle
    Flute
    Type
    No. of
    Flutes
    Thread
    Type
    Pitch Dia.
    Limit
    Each
    Uncoated High-Speed Steel
    3/8"-16
    		1 1/16"3 3/8"5/16"
    		0.3125"110°Spiral2UNC
    		H32748A47000000
     
    Titanium Nitride (TiN)-Coated High-Speed Steel
    3/8"-16
    		1 1/8"2 15/16"5/16"
    		0.3125"118°Spiral2UNC
    		H32748A8900000
     

    Tapping Threaded Insert Assortments for Soft Metal

    Image of Product. Front orientation. Threaded Inserts. Tapping Threaded Insert Assortments for Soft Metal.
    Cut a variety of thread sizes into aluminum and other soft metal—no taps required. These inserts cut their own threads and lock into material, so they won’t budge when you install or remove a screw. To install inserts with a wrench, thread an insert and two hex nuts onto a bolt. Then, grip and turn the top nut to drive into a drilled hole. If you need to add a lot of threaded connections quickly, use an installation tool (not included) with a ratchet wrench or drill press. These inserts are comparable to Tap-Lok inserts.
    Zinc-Plated Steel—A step up from plain steel, the plating withstands occasional exposure to moisture.
    No. of Inserts
    Included
    Includes
    Drill Bit Size
    For Max. Hole Dia.
    Each
    Zinc-Plated Steel
    501/4"-20 Thread x 0.472" Installed Lg. (10 Each)
    5/16"-18 Thread x 0.551" Installed Lg. (10 Each)
    3/8"-16 Thread x 0.709" Installed Lg. (10 Each)
    7/16"-14 Thread x 0.866" Installed Lg. (10 Each)
    1/2"-13 Thread x 0.945" Installed Lg. (10 each)
    Drill Bits    		7/16"
    33/64"
    19/32"
    L
    U
    		0.290"
    0.368"
    0.438"
    0.516"
    0.594"    		93491A1300000000
     

    Countersink Drill Bits for Taps

    Image of Product. Front orientation. ZoomedIn view. Countersink Drill Bits. Countersink Drill Bits for Taps.
    Also called subland drill bits, these bits countersink as they drill to prepare holes for tapping. The 90° countersink angle guides the tap into the hole. The drill bit diameter will not change after sharpening.
    Dia.
    Lg.
    90°
    Countersink Angle
    For Tap Thread
    Size
    Body
    Step
    Step
    Overall
    Shank
    Dia.
    Point
    Angle
    For Use On
    Mfr.
    Each
    Uncoated High-Speed Steel
     
    2 Flutes
    3/8"-16
    		0.438"0.313"3/4"5 1/2"0.438"118°Aluminum, Brass, Bronze, Iron, Plastic, Stainless Steel, SteelRTS Cutting Tools29475A79000000
     

    Helical Threaded Inserts with Installation Tools

    Image of Product. Drill Bit, Installation Tool and Through-Hole Tap. Front orientation. Threaded Inserts. Helical Threaded Inserts with Installation Tools, Pronged, Drill Bit, Through-Hole Tap, Installation Tool.

    Drill Bit, Installation Tool

    and Through-Hole Tap

    Quickly restore stripped threads—these inserts come with through-hole taps and installation tools. The tough coils on these inserts expand once installed to anchor in a tapped hole.
    Pronged—The prong attaches to an installation tool for precise control as you drive inserts in. Remove the prong with a punch or break-off tool before inserting a screw.
    18-8 Stainless Steel—The choice for wet and outdoor environments, these inserts resist rust and mild chemicals.
    Thread
    Size
    Installed
    Lg.
    Drill Bit
    Size
    For Max.
    Hole Dia.
    No. of Inserts
    Included
    Includes
    Each
    Pronged
     
    18-8 Stainless Steel
    3/8"-16
    		0.375"X
    		0.391"10Drill Bit
    Installation Tool
    Through-Hole Tap    		91732A560000000
    3/8"-16
    		0.562"X
    		0.391"10Drill Bit
    Installation Tool
    Through-Hole Tap    		91732A93000000
    3/8"-16
    		0.750"X
    		0.391"5Drill Bit
    Installation Tool
    Through-Hole Tap    		91732A57000000
    3/8"-16
    		0.938"X
    		0.391"5Drill Bit
    Installation Tool
    Through-Hole Tap    		98356A13700000
    3/8"-16
    		1.125"X
    		0.391"5Drill Bit
    Installation Tool
    Through-Hole Tap    		98356A13800000
     

    Impact Wrench Tap Sets

    Image of System. Front orientation. Exploded view. Contains Annotated. Taps. Impact Wrench Tap Sets.
    Image of Product. Front orientation. Taps. Impact Wrench Tap Sets.
    Tap holes with a range of thread sizes 15 times faster than by hand. Made with an oversized shank and hardened high-speed steel, the taps in these sets are built to handle the high torque of impact wrenches to cut material quickly. Your wrench’s rapid hammering keeps these taps moving forward for smooth, continuous cutting. Those rapid blows also help break and clear chips as you cut, so you don’t need to pause and reverse, even in large holes and tough materials. This also means the tap is less likely to jam on chips and snap.
    You’ll need a VersaDrive chuck (sold separately) to install these taps into your impact wrench. You can also get chucks for impact drivers (sold separately).
    Hardened High-Speed Steel—Multiple Tap Thread Sizes
    Titanium Nitride (TiN) Coated—Run at higher speeds and last twice as long as uncoated taps.
    Taper Chamfer—Good for both starting holes and threading through holes. These taps have the longest taper to gradually engage with the material, reducing the force needed to turn them. They can't reach the bottom of blind holes, however, so you will likely need to finish with a bottoming-chamfer tap.
    Shank
    Taper Chamfer
    No. of
    Pieces
    Thread Size
    Thread
    Type
    Container
    Type
    No. of
    Flutes
    Type
    Size
    Each
    Titanium Nitride (TiN) Coated
    51/4"-20, 5/16"-18, 3/8"-16, 1/2"-13, 5/8"-11UNC
    		Foam Tray4VersaDrive Hex7/16"9617N110000000
     
    Accessories for Taps
    Required Chucks
    Image of Product. Quick-Change. Front orientation. Impact Wrench Chucks. Quick-Change Pull-Back Tool Release.

    Quick-Change

    Image of Product. Strong-Hold. Back orientation. Impact Wrench Chucks. Strong-Hold Push-Forward Tool Release.

    Strong-Hold

    These chucks mount directly onto the square drive of your impact wrench. They work with any tool with a VersaDrive hex shank, so you don’t need to swap chucks to use drill bits, reamers, and other tools.
    Quick-Change Pull-Back Tool Release—Require just one hand to load. Push your tool in the chuck until you hear the ball detents click into place. To remove your tool, pull back the collar.
    Strong-Hold Push-Forward Tool Release—Hold cutting tools more securely than quick-change chucks. To insert and remove cutting tools, you must push a collar forward. Since impact force drives your cutting tool the opposite way, it can’t come loose from the chuck while you work.
    Manganese Phosphate-Coated Steel—The coating on these chucks prevents rust.
    For
    Shank
    For Square
    Drive Size
    Type
    Size
    Overall
    Lg.
    Material
    Includes
    Each
     
    Quick-Change Pull-Back Tool Release
    1/2"VersaDrive Hex7/16"2 5/32"Black-Oxide SteelRetaining Ring, Retention Pin9589N112000000
     
    Strong-Hold Push-Forward Tool Release
    3/8"VersaDrive Hex7/16"2"Manganese Phosphate-Coated SteelRetaining Ring, Retention Pin9589N111000000
    1/2"VersaDrive Hex7/16"2 5/32"Manganese Phosphate-Coated SteelRetaining Ring, Retention Pin9589N113000000
    3/4"VersaDrive Hex7/16"2 3/8"Manganese Phosphate-Coated SteelRetaining Ring, Retention Pin9589N114000000
     
    Optional Extensions
    Image of Product. Front orientation. Impact Wrench Chuck Extensions.
    Extend your cutting tool’s reach. These extensions attach to your chuck and accept any tool with a VersaDrive hex shank.
    For
    Shank
    Shank
    Overall
    Lg.
    Type
    Size
    Type
    Size
    OD
    Material
    Each
    Quick-Change Pull-Back Tool Release
    5"VersaDrive Hex7/16"VersaDrive Hex7/16"1 7/64"Black-Oxide Steel9589N115000000
    12"VersaDrive Hex7/16"VersaDrive Hex7/16"1 7/64"Black-Oxide Steel9589N11600000
     
    Optional Chucks
    Each
    Optional Chuck for Impact Drivers—1/4" Quick-Change Hex Shank (Male) to VersaDrive Hex Shank (Female)9594N111000000

    Impact Wrench Chip-Clearing Tap Sets

    Image of System. Front orientation. Exploded view. Contains Annotated. Taps. Impact Wrench Chip-Clearing Tap Sets.
    Image of ProductInUse. Front orientation. Taps. Impact Wrench Chip-Clearing Tap Sets.
    Image of Product. Front orientation. Taps. Impact Wrench Chip-Clearing Tap Sets.
    Cut the cleanest, quickest threads in a range of sizes without ever stopping for chips. Made with an oversized shank and hardened high-speed steel, the taps in these sets are built to handle the high torque of impact wrenches for smooth, continuous cutting. The rapid hammering breaks up chips and spiral flutes pull them out of the hole, so you never have to pause and reverse to clear them. They can thread both blind and through holes 15 times faster than by hand. They’re a good choice for threading large holes and working with hard metals.
    You’ll need a VersaDrive chuck (sold separately) to install these taps into your impact wrench.
    Titanium Nitride (TiN) Coated—Run at higher speeds and last twice as long as uncoated taps.
    Spiral Flute for Blind Holes—Pull chips back toward the tap so they won't build up in blind holes. When tapping brittle material like iron that creates fine or powdery debris, choose a straight-flute tap.
    Plug Chamfer—Our go-to chamfer type. With a longer taper than a bottoming chamfer, they are easier to turn but won't thread as close the bottom of a hole.
    Shank
    Spiral Flute for
    Blind Holes
    No. of
    Pieces
    Thread Size
    Thread
    Type
    No. of
    Flutes
    Container
    Type
    Type
    Size
    Chamfer
    Type
    Each
    Hardened High-Speed Steel
     
    Titanium Nitride (TiN) Coated
    51/4"-20, 5/16"-18, 3/8"-16, 1/2"-13, 5/8"-11
    		UNC
    		3Foam TrayVersaDrive Hex7/16"Plug9611N110000000
     
    Accessories for Taps
    Required Chucks
    Image of Product. Quick-Change. Front orientation. Impact Wrench Chucks. Quick-Change Pull-Back Tool Release.

    Quick-Change

    Image of Product. Strong-Hold. Back orientation. Impact Wrench Chucks. Strong-Hold Push-Forward Tool Release.

    Strong-Hold

    Image of Product. Quick-Change with Clutch Overload Protection. Back orientation. Impact Wrench Chucks. Impact Wrench Chucks with Clutch Overload Protection, Quick-Change Pull-Back Tool Release.

    Quick-Change with

    Clutch Overload

    Protection

    These chucks mount directly onto the square drive of your impact wrench. You can use any of these chucks when tapping through holes.
    Impact Wrench Chucks with Clutch Overload Protection—Use to tap blind holes. The clutch will engage when the tap contacts the bottom of the hole to prevent it from breaking. Choose the chuck that’s rated for the hole diameter you are tapping.
    Quick-Change Pull-Back Tool Release—Require just one hand to load. Push your tool in the chuck until you hear the ball detents click into place. To remove your tool, pull back the collar.
    Strong-Hold Push-Forward Tool Release—Hold cutting tools more securely than quick-change chucks. To insert and remove cutting tools, you must push a collar forward. Since impact force drives your cutting tool the opposite way, it can’t come loose from the chuck while you work.
    Manganese Phosphate-Coated Steel—The coating on these chucks prevents rust.
    For
    Shank
    For Square
    Drive Size
    Type
    Size
    Overall
    Lg.
    Material
    For Blind Hole Dia.
    Includes
    Each
    Impact Wrench Chucks
     
    Quick-Change Pull-Back Tool Release
    1/2"VersaDrive Hex7/16"2 5/32"Black-Oxide Steel—Retaining Ring, Retention Pin9589N112000000
     
    Strong-Hold Push-Forward Tool Release
    3/8"VersaDrive Hex7/16"2"Manganese Phosphate-Coated Steel—Retaining Ring, Retention Pin9589N111000000
    1/2"VersaDrive Hex7/16"2 5/32"Manganese Phosphate-Coated Steel—Retaining Ring, Retention Pin9589N113000000
    3/4"VersaDrive Hex7/16"2 3/8"Manganese Phosphate-Coated Steel—Retaining Ring, Retention Pin9589N114000000
     
    Impact Wrench Chucks with Clutch Overload Protection
     
    Quick-Change Pull-Back Tool Release
    1/2"VersaDrive Hex7/16"4"Manganese Phosphate-Coated Steel5/16" to 1/2", 8 mm to 12 mmRetaining Ring, Retention Pin9613N21000000
    1/2"VersaDrive Hex7/16"4 1/2"Manganese Phosphate-Coated Steel1/2" to 5/8", 12 mm to 16 mmRetaining Ring, Retention Pin9613N22000000
     
    Optional Extensions
    Image of Product. Front orientation. Impact Wrench Chuck Extensions.
    Extend your cutting tool’s reach. These extensions attach to your chuck and accept any tool with a VersaDrive hex shank.
    For
    Shank
    Shank
    Overall
    Lg.
    Type
    Size
    Type
    Size
    OD
    Material
    Each
    Quick-Change Pull-Back Tool Release
    5"VersaDrive Hex7/16"VersaDrive Hex7/16"1 7/64"Black-Oxide Steel9589N115000000
    12"VersaDrive Hex7/16"VersaDrive Hex7/16"1 7/64"Black-Oxide Steel9589N11600000
     

    Impact Wrench Chip-Clearing Taps

    Image of System. Front orientation. Exploded view. Contains Annotated. Taps. Impact Wrench Chip-Clearing Taps.
    Image of ProductInUse. Front orientation. Taps. Impact Wrench Chip-Clearing Taps.
    Cut the cleanest, quickest threads without ever stopping for chips. Made with an oversized shank and hardened high-speed steel, these taps are built to handle the high torque of impact wrenches for smooth, continuous cutting. The rapid hammering breaks up chips and spiral flutes pull them out of the hole, so you never have to pause and reverse to clear them. They can thread both blind and through holes 15 times faster than by hand. They’re a good choice for threading large holes and working with hard metals.
    You’ll need a VersaDrive chuck (sold separately) to install these taps into your impact wrench.
    Titanium Nitride (TiN) Coated—Run at higher speeds and last twice as long as uncoated taps.
    Spiral Flute for Blind Holes—Pull chips back toward the tap so they won't build up in blind holes. When tapping brittle material like iron that creates fine or powdery debris, choose a straight-flute tap.
    Plug Chamfer—Our go-to chamfer type. With a longer taper than a bottoming chamfer, they are easier to turn but won't thread as close the bottom of a hole.
    Drill Bit
    Shank
    Spiral Flute for Blind Holes
    Thread
    Size
    Thread
    Lg.
    Overall
    Lg.
    Thread
    Type
    Size
    Decimal Size
    Equiv.
    Type
    Size
    Chamfer
    Type
    No. of
    Flutes
    Each
    Hardened High-Speed Steel
     
    Titanium Nitride (TiN) Coated
    3/8"-16
    		1"2 3/4"UNC
    		5/16"
    		0.3125"VersaDrive Hex7/16"Plug39613N130000000
     
    Accessories for Taps
    Required Chucks
    Image of Product. Quick-Change. Front orientation. Impact Wrench Chucks. Quick-Change Pull-Back Tool Release.

    Quick-Change

    Image of Product. Strong-Hold. Back orientation. Impact Wrench Chucks. Strong-Hold Push-Forward Tool Release.

    Strong-Hold

    Image of Product. Quick-Change with Clutch Overload Protection. Back orientation. Impact Wrench Chucks. Impact Wrench Chucks with Clutch Overload Protection, Quick-Change Pull-Back Tool Release.

    Quick-Change with

    Clutch Overload

    Protection

    These chucks mount directly onto the square drive of your impact wrench. You can use any of these chucks when tapping through holes.
    Impact Wrench Chucks with Clutch Overload Protection—Use to tap blind holes. The clutch will engage when the tap contacts the bottom of the hole to prevent it from breaking. Choose the chuck that’s rated for the hole diameter you are tapping.
    Quick-Change Pull-Back Tool Release—Require just one hand to load. Push your tool in the chuck until you hear the ball detents click into place. To remove your tool, pull back the collar.
    Strong-Hold Push-Forward Tool Release—Hold cutting tools more securely than quick-change chucks. To insert and remove cutting tools, you must push a collar forward. Since impact force drives your cutting tool the opposite way, it can’t come loose from the chuck while you work.
    Manganese Phosphate-Coated Steel—The coating on these chucks prevents rust.
    For
    Shank
    For Square
    Drive Size
    Type
    Size
    Overall
    Lg.
    Material
    For Blind Hole Dia.
    Includes
    Each
    Impact Wrench Chucks
     
    Quick-Change Pull-Back Tool Release
    1/2"VersaDrive Hex7/16"2 5/32"Black-Oxide Steel—Retaining Ring, Retention Pin9589N112000000
     
    Strong-Hold Push-Forward Tool Release
    3/8"VersaDrive Hex7/16"2"Manganese Phosphate-Coated Steel—Retaining Ring, Retention Pin9589N111000000
    1/2"VersaDrive Hex7/16"2 5/32"Manganese Phosphate-Coated Steel—Retaining Ring, Retention Pin9589N113000000
    3/4"VersaDrive Hex7/16"2 3/8"Manganese Phosphate-Coated Steel—Retaining Ring, Retention Pin9589N114000000
     
    Impact Wrench Chucks with Clutch Overload Protection
     
    Quick-Change Pull-Back Tool Release
    1/2"VersaDrive Hex7/16"4"Manganese Phosphate-Coated Steel5/16" to 1/2", 8 mm to 12 mmRetaining Ring, Retention Pin9613N21000000
     
    Optional Extensions
    Image of Product. Front orientation. Impact Wrench Chuck Extensions.
    Extend your cutting tool’s reach. These extensions attach to your chuck and accept any tool with a VersaDrive hex shank.
    For
    Shank
    Shank
    Overall
    Lg.
    Type
    Size
    Type
    Size
    OD
    Material
    Each
    Quick-Change Pull-Back Tool Release
    5"VersaDrive Hex7/16"VersaDrive Hex7/16"1 7/64"Black-Oxide Steel9589N115000000
    12"VersaDrive Hex7/16"VersaDrive Hex7/16"1 7/64"Black-Oxide Steel9589N11600000
     

    Impact Wrench Drill Tap Sets

    Image of System. Front orientation. Contains Annotated. Drill Taps. Impact Wrench Drill Tap Sets.
    Image of Product. Side1 orientation. Drill Taps. Impact Wrench Drill Tap Sets.
    Drill and tap holes with a range of thread sizes in a single fluid step that’s 15 times faster than by hand. Made with an oversized shank and hardened high-speed steel, the drill taps in these sets are built to handle the high torque of your impact wrench to cut material quickly. A built-in pilot starts the hole while the taper chamfer gradually engages material for clean, accurate threads. Your wrench’s rapid hammering helps break and clear chips as you cut, so you don’t need to pause and reverse. This also means these drill taps are less likely to jam on chips and snap. They’re a great choice for quickly preparing threaded through holes in thin materials.
    Titanium Nitride (TiN)-Coated Hardened High-Speed Steel—Titanium Nitride (TiN) coated taps resist heat and wear better than uncoated taps, letting them last up to twice as long.
    Spiral Flute—Taps with spiral flutes keep chips clear by drawing them back toward the tap and out of the hole.
    No. of
    Pieces
    Chamfer
    Type
    Tap Sizes Included
    Flute
    Type
    No. of
    Flutes
    Drill Bit Sizes Included
    Max. Tapping Dp.
    Shank Type
    Hex Shank
    Size
    Container
    Type
    Each
    Titanium Nitride (TiN)-Coated Hardened High-Speed Steel
    4Taper1/4"-20
    5/16"-18
    3/8"-16
    1/2"-13    		Spiral213/64"
    1/4"
    5/16"
    27/64"    		1/4"
    5/16"
    3/8"
    1/2"    		VersaDrive Hex7/16"Foam Tray9648N110000000
     
    Accessories for Taps
    Required Chucks
    Image of Product. Quick-Change. Front orientation. Impact Wrench Chucks.

    Quick-Change

    Image of Product. Strong-Hold. Back orientation. Impact Wrench Chucks. Strong-Hold Push-Forward Tool Release.

    Strong-Hold

    These chucks mount directly onto the square drive of your impact wrench. They work with any tool with a VersaDrive hex shank, so you don’t need to swap chucks to use reamers, taps, and other tools.
    Quick-Change Pull-Back Tool Release—Require just one hand to load. Push your tool in the chuck until you hear the ball detents click into place. To remove your tool, pull back the collar.
    Strong-Hold Push-Forward Tool Release—Hold cutting tools more securely than quick-change chucks. To insert and remove cutting tools, you must push a collar forward. Since impact force drives your cutting tool the opposite way, it can’t come loose from the chuck while you work.
    Manganese Phosphate-Coated Steel—The coating on these chucks prevents rust.
    For
    Shank
    For Square
    Drive Size
    Type
    Size
    Overall
    Lg.
    Material
    Includes
    Each
    Quick-Change Pull-Back Tool Release
    1/2"VersaDrive Hex7/16"2 5/32"Black-Oxide SteelRetaining Ring, Retention Pin9589N112000000
     
    Strong-Hold Push-Forward Tool Release
    3/8"VersaDrive Hex7/16"2"Manganese Phosphate-Coated SteelRetaining Ring, Retention Pin9589N111000000
    1/2"VersaDrive Hex7/16"2 5/32"Manganese Phosphate-Coated SteelRetaining Ring, Retention Pin9589N113000000
    3/4"VersaDrive Hex7/16"2 3/8"Manganese Phosphate-Coated SteelRetaining Ring, Retention Pin9589N114000000
     
    Optional Extensions
    Image of Product. Front orientation. Impact Wrench Chuck Extensions.
    Extend your cutting tool’s reach. These extensions attach to your chuck and accept any tool with a VersaDrive hex shank.
    For
    Shank
    Shank
    Overall
    Lg.
    Type
    Size
    Type
    Size
    OD
    Material
    Each
    Quick-Change Pull-Back Tool Release
    5"VersaDrive Hex7/16"VersaDrive Hex7/16"1 7/64"Black-Oxide Steel9589N115000000
    12"VersaDrive Hex7/16"VersaDrive Hex7/16"1 7/64"Black-Oxide Steel9589N11600000
     
    Optional Chucks
    Each
    Optional Chuck for Impact Drivers—1/4" Quick-Change Hex Shank (Male) to VersaDrive Hex Shank (Female)9594N111000000

    Impact Wrench Drill Taps

    Image of System. Front orientation. Contains Annotated. Drill Taps. Impact Wrench Drill Taps.
    Image of Product. Side1 orientation. Drill Taps. Impact Wrench Drill Taps.
    Drill and thread holes in a single fluid step that’s 15 times faster than by hand. Made with an oversized shank and hardened high-speed steel, these drill taps are built to handle the high torque of your impact wrench to cut material quickly. A built-in pilot starts the hole while the taper chamfer gradually engages material for clean, accurate threads. Your wrench’s rapid hammering helps break and clear chips as you cut, so you don’t need to pause and reverse. This also means these drill taps are less likely to jam on chips and snap. They’re a great choice for quickly preparing threaded through holes in thin materials.
    You’ll need a VersaDrive chuck (sold separately) to install these drill taps into your impact wrench. You can also get chucks for impact drivers (sold separately).
    Titanium Nitride (TiN)-Coated Hardened High-Speed Steel—Titanium Nitride (TiN) coated taps resist heat and wear better than uncoated taps, letting them last up to twice as long.
    Spiral Flute—Taps with spiral flutes keep chips clear by drawing them back toward the tap and out of the hole.
    Thread
    Drill Bit
    Taper Chamfer
    Size
    Lg.
    Overall
    Lg.
    Size
    Decimal Size
    Equiv.
    Point
    Angle
    Max. Tapping
    Dp.
    Flute
    Type
    No. of
    Flutes
    Thread
    Type
    Pitch Dia.
    Limit
    Shank Type
    Hex Shank
    Size
    Each
    Titanium Nitride (TiN)-Coated Hardened High-Speed Steel
    3/8"-16
    		1"3 5/8"5/16"
    		0.3125"135°3/8"Spiral2UNC
    		H3VersaDrive Hex7/16"9672N17000000
     
    Accessories for Taps
    Required Chucks
    Image of Product. Quick-Change. Front orientation. Impact Wrench Chucks.

    Quick-Change

    Image of Product. Strong-Hold. Back orientation. Impact Wrench Chucks. Strong-Hold Push-Forward Tool Release.

    Strong-Hold

    These chucks mount directly onto the square drive of your impact wrench. They work with any tool with a VersaDrive hex shank, so you don’t need to swap chucks to use reamers, taps, and other tools.
    Quick-Change Pull-Back Tool Release—Require just one hand to load. Push your tool in the chuck until you hear the ball detents click into place. To remove your tool, pull back the collar.
    Strong-Hold Push-Forward Tool Release—Hold cutting tools more securely than quick-change chucks. To insert and remove cutting tools, you must push a collar forward. Since impact force drives your cutting tool the opposite way, it can’t come loose from the chuck while you work.
    Manganese Phosphate-Coated Steel—The coating on these chucks prevents rust.
    For
    Shank
    For Square
    Drive Size
    Type
    Size
    Overall
    Lg.
    Material
    Includes
    Each
    Quick-Change Pull-Back Tool Release
    1/2"VersaDrive Hex7/16"2 5/32"Black-Oxide SteelRetaining Ring, Retention Pin9589N112000000
     
    Strong-Hold Push-Forward Tool Release
    3/8"VersaDrive Hex7/16"2"Manganese Phosphate-Coated SteelRetaining Ring, Retention Pin9589N111000000
    1/2"VersaDrive Hex7/16"2 5/32"Manganese Phosphate-Coated SteelRetaining Ring, Retention Pin9589N113000000
    3/4"VersaDrive Hex7/16"2 3/8"Manganese Phosphate-Coated SteelRetaining Ring, Retention Pin9589N114000000
     
    Optional Extensions
    Image of Product. Front orientation. Impact Wrench Chuck Extensions.
    Extend your cutting tool’s reach. These extensions attach to your chuck and accept any tool with a VersaDrive hex shank.
    For
    Shank
    Shank
    Overall
    Lg.
    Type
    Size
    Type
    Size
    OD
    Material
    Each
    Quick-Change Pull-Back Tool Release
    5"VersaDrive Hex7/16"VersaDrive Hex7/16"1 7/64"Black-Oxide Steel9589N115000000
    12"VersaDrive Hex7/16"VersaDrive Hex7/16"1 7/64"Black-Oxide Steel9589N11600000
     
    Optional Chucks
    Each
    Optional Chuck for Impact Drivers—1/4" Quick-Change Hex Shank (Male) to VersaDrive Hex Shank (Female)9594N111000000

    Impact Wrench Tap and Drill Bit Sets

    Image of System. Front orientation. Contains Annotated. Tap and Drill Bit Sets. Impact Wrench Tap and Drill Bit Sets.
    Image of Product. Front orientation. Tap and Drill Bit Sets. Impact Wrench Tap and Drill Bit Sets.
    Cut a range of hole sizes two times faster than power drills, then thread them 15 times faster than by hand. Made with an oversized shank and hardened high-speed steel, the tools in these sets are built to handle the high torque of impact wrenches without snapping. The drill bits have a built-in pilot with a stepped tip that centers the bit, prevents slipping, and drills with one third the pressure of standard bits. Your wrench’s rapid hammering keeps the taps moving forward for smooth, continuous cutting. Those rapid blows also help break and clear chips as you cut, so you don’t need to pause and reverse, even in large holes and tough materials. Since your wrench absorbs kickback, it won’t fight you when a cutting tool snags, reducing wrist strain and fatigue over long jobs.
    You’ll need a VersaDrive chuck (sold separately) to install the bits and taps into your impact wrench. You can also get chucks for impact drivers and magnetic-base drills (both sold separately). For jobs that don’t require the torque of an impact tool, you can fit these drill bits and taps directly into a 1/2" chuck on a standard power drill.
    Titanium Nitride (TiN)-Coated Hardened High-Speed Steel Tools—Titanium nitride (TiN)-coated hardened high-speed steel tools have a longer tool life than carbon steel. They resist heat and wear better than uncoated tools, letting them last up to twice as long.
    Taper Chamfer—Taper-chamfer taps have 7-10 chamfered threads at the tip for cutting into the workpiece. They require less torque than other chamfer types, making them a good choice for starting threads and tapping through holes. However, a longer taper means that they cannot thread as close to the bottom of closed-end holes.
    No. of
    Pieces
    Chamfer
    Type
    Tap Sizes
    Included
    Overall Lg.
    Thread
    Type
    No. of
    Flutes
    Pitch Dia.
    Limit
    Drill Bit Sizes
    Included
    Drill Bit Material
    Shank Type
    Hex Shank
    Size
    Container
    Type
    Each
    Titanium Nitride (TiN)-Coated Hardened High-Speed Steel Tools
    8Taper1/4 "-20
    5/16"-18
    3/8"-16
    1/2"-13    		2 9/32"
    2 23/64"
    2 3/4"
    3 5/32"
    3 27/64"    		UNC
    		2, 4H7, H8, H9, H105/16"
    27/64"
    7 ga.
    F    		Titanium Nitride (TiN)-Coated Hardened High-Speed SteelVersaDrive Hex7/16"Foam Tray9706N110000000
     
    Accessories for Tap and Drill Bit Sets
    Required Chucks
    Image of Product. Quick-Change. Front orientation. Impact Wrench Chucks. Quick-Change Pull-Back Tool Release.

    Quick-Change

    Image of Product. Strong-Hold. Back orientation. Impact Wrench Chucks. Strong-Hold Push-Forward Tool Release.

    Strong-Hold

    These chucks mount directly onto the square drive of your impact wrench. They work with any tool with a VersaDrive hex shank, so you don’t need to swap chucks to use drill bits, taps, reamers, and other tools.
    Quick-Change Pull-Back Tool Release—Require just one hand to load. Push your tool in the chuck until you hear the ball detents click into place. To remove your tool, pull back the collar.
    Strong-Hold Push-Forward Tool Release—Hold cutting tools more securely than quick-change chucks. To insert and remove cutting tools, you must push a collar forward. Since impact force drives your cutting tool the opposite way, it can’t come loose from the chuck while you work.
    Manganese Phosphate-Coated Steel—The coating on these chucks prevents rust.
    For
    Shank
    For Square
    Drive Size
    Type
    Size
    Overall
    Lg.
    Material
    Includes
    Each
    Quick-Change Pull-Back Tool Release
    1/2"VersaDrive Hex7/16"2 5/32"Black-Oxide SteelRetaining Ring, Retention Pin9589N112000000
     
    Strong-Hold Push-Forward Tool Release
    3/8"VersaDrive Hex7/16"2"Manganese Phosphate-Coated SteelRetaining Ring, Retention Pin9589N111000000
    1/2"VersaDrive Hex7/16"2 5/32"Manganese Phosphate-Coated SteelRetaining Ring, Retention Pin9589N113000000
    3/4"VersaDrive Hex7/16"2 3/8"Manganese Phosphate-Coated SteelRetaining Ring, Retention Pin9589N114000000
     
    Optional Extensions
    Image of Product. Front orientation. Impact Wrench Chuck Extensions.
    Extend your cutting tool’s reach. These extensions attach to your chuck and accept any tool with a VersaDrive hex shank.
    For
    Shank
    Shank
    Overall
    Lg.
    Type
    Size
    Type
    Size
    OD
    Material
    Each
    Quick-Change Pull-Back Tool Release
    5"VersaDrive Hex7/16"VersaDrive Hex7/16"1 7/64"Black-Oxide Steel9589N115000000
    12"VersaDrive Hex7/16"VersaDrive Hex7/16"1 7/64"Black-Oxide Steel9589N11600000
     
    Optional Chucks
    Each
    Optional Chuck for Impact Drivers - 1/4" Quick-Change Hex Shank (Male) to VersaDrive Hex Shank (Female)9594N111000000
    Optional Chuck for Magnetic-Base Drills - 3/4" Round Shank (Male) to VersaDrive Hex Shank (Female)9585N11100000

    Impact Wrench Taps

    Image of System. Front orientation. Exploded view. Contains Annotated. Taps. Impact Wrench Taps.
    Image of Product. Front orientation. Taps. Impact Wrench Taps.
    Thread holes 15 times faster than by hand. Made with an oversized shank and hardened high-speed steel, these taps are built to handle the high torque of impact wrenches to cut material quickly. Your wrench’s rapid hammering keeps these taps moving forward for smooth, continuous cutting. Those rapid blows also help break and clear chips as you cut, so you don’t need to pause and reverse, even in large holes and tough materials. This also means the tap is less likely to jam on chips and snap.
    You’ll need a VersaDrive chuck (sold separately) to install these taps into your impact wrench. You can also get chucks for impact drivers (sold separately).
    Titanium Nitride (TiN) Coated—Run at higher speeds and last twice as long as uncoated taps.
    Taper Chamfer—Good for both starting holes and threading through holes. These taps have the longest taper to gradually engage with the material, reducing the force needed to turn them. They can't reach the bottom of blind holes, however, so you will likely need to finish with a bottoming-chamfer tap.
    Drill Bit
    Shank
    Taper Chamfer
    Thread
    Size
    Thread
    Lg.
    Overall
    Lg.
    Thread
    Type
    No. of
    Flutes
    Size
    Decimal Size
    Equiv.
    Type
    Size
    Each
    Hardened High-Speed Steel
     
    Titanium Nitride (TiN) Coated
    3/8"-16
    		15/16"2 3/4"UNC
    		45/16"
    		0.3125"VersaDrive Hex7/16"9618N13000000
     
    Accessories for Taps
    Required Chucks
    Image of Product. Quick-Change. Front orientation. Impact Wrench Chucks. Quick-Change Pull-Back Tool Release.

    Quick-Change

    Image of Product. Strong-Hold. Back orientation. Impact Wrench Chucks. Strong-Hold Push-Forward Tool Release.

    Strong-Hold

    These chucks mount directly onto the square drive of your impact wrench. They work with any tool with a VersaDrive hex shank, so you don’t need to swap chucks to use drill bits, reamers, and other tools.
    Quick-Change Pull-Back Tool Release—Require just one hand to load. Push your tool in the chuck until you hear the ball detents click into place. To remove your tool, pull back the collar.
    Strong-Hold Push-Forward Tool Release—Hold cutting tools more securely than quick-change chucks. To insert and remove cutting tools, you must push a collar forward. Since impact force drives your cutting tool the opposite way, it can’t come loose from the chuck while you work.
    Manganese Phosphate-Coated Steel—The coating on these chucks prevents rust.
    For
    Shank
    For Square
    Drive Size
    Type
    Size
    Overall
    Lg.
    Material
    Includes
    Each
     
    Quick-Change Pull-Back Tool Release
    1/2"VersaDrive Hex7/16"2 5/32"Black-Oxide SteelRetaining Ring, Retention Pin9589N112000000
     
    Strong-Hold Push-Forward Tool Release
    3/8"VersaDrive Hex7/16"2"Manganese Phosphate-Coated SteelRetaining Ring, Retention Pin9589N111000000
    1/2"VersaDrive Hex7/16"2 5/32"Manganese Phosphate-Coated SteelRetaining Ring, Retention Pin9589N113000000
    3/4"VersaDrive Hex7/16"2 3/8"Manganese Phosphate-Coated SteelRetaining Ring, Retention Pin9589N114000000
     
    Optional Extensions
    Image of Product. Front orientation. Impact Wrench Chuck Extensions.
    Extend your cutting tool’s reach. These extensions attach to your chuck and accept any tool with a VersaDrive hex shank.
    For
    Shank
    Shank
    Overall
    Lg.
    Type
    Size
    Type
    Size
    OD
    Material
    Each
    Quick-Change Pull-Back Tool Release
    5"VersaDrive Hex7/16"VersaDrive Hex7/16"1 7/64"Black-Oxide Steel9589N115000000
    12"VersaDrive Hex7/16"VersaDrive Hex7/16"1 7/64"Black-Oxide Steel9589N11600000
     
    Optional Chucks
    Each
    Optional Chuck for Impact Drivers—1/4" Quick-Change Hex Shank (Male) to VersaDrive Hex Shank (Female)9594N111000000

    Impact Wrench Tap, Drill Bit, and Reamer Sets

    Image of Product. Front orientation. Tap, Drill Bit, and Reamer Sets. Impact Wrench Tap, Drill Bit, and Reamer Sets, 13 Pieces.

    13 Pieces

    Image of Product. Front orientation. Tap, Drill Bit, and Reamer Sets. Impact Wrench Tap, Drill Bit, and Reamer Sets, 28 Pieces.

    28 Pieces

    With everything but the impact wrench, these sets are the fastest way to prepare holes with a hand tool. They include a selection of cutting tools and a chuck that lets you swap them in and out of your impact wrench. Made with hardened steel, the cutting tools are built to handle the high torque of the wrench without snapping, even in hard metals. This also means the bits cut holes two times faster than with a power drill, and the taps thread holes 15 times faster than with a tap wrench. The rapid hammering breaks and clears chips as you work to prevent jams. Since your wrench absorbs kickback, it won’t fight you if a cutting tool snags, reducing wrist strain and fatigue over long jobs.
    The chucks hold any tool with a VersaDrive hex shank—including countersinks and extractors—so just one chuck and wrench handle any cutting task.
    13 Pieces—Includes a range of drill bits, taps, and step reamers. All cutting tools are coated with titanium nitride (TiN) to hold up at higher speeds and last longer than uncoated and oxide-coated bits, especially on tough materials like hardened steel and nickel.
    28 Pieces—Includes drill bits, taps, and step reamers plus reamers for hole alignment, drill taps, and hollow core cutters to further speed up your jobs. Use the drill taps to cut threaded holes in one smooth, continuous pass. The reamers enlarge holes and correct misalignment or overlap. The hollow-core cutters attach directly to your power drill, so you can form burr-free holes without a magnetic-base drill. Unlike drill bits, they cut only on the periphery of the hole and produce a solid slug, so they’re faster and leave a smoother edge. Two additional chucks let you use all these cutting tools with an impact driver and magnetic-base drill, too.
    Shank
    No. of
    Pieces
    System of
    Measurement
    Includes
    Type
    Size
    Container
    Type
    Each
    13InchFour Drill Bits with Stepped Tip—7 Ga., F, 5/16", 27/64" Drill Bit Sizes
    Four Taps—1/4"-20, 5/16"-18, 3/8"-16, 1/2"-13 Thread Sizes
    Three Step Reamer Drill Bits with Stepped Tip—5/16"-9/16" Dia. (increments of 1/16"), 9/16"-13/16" Dia. (increments of 1/16"), 13/16"-1 1/16" Dia. (increments of 1/16")
    One Quick-Change Chuck for Impact Wrenches—For 1/2" Square Drive
    One 5" Extension    		VersaDrive Hex7/16"Plastic Case9639N110000000
    28InchSix Drill Bits with Stepped Tip—1/4", 9/32", 5/16", 3/8", 7/16", 1/2" Drill Bit Sizes
    Three Taps—1/2"-13, 5/8"-11, 3/4"-10 Thread Sizes
    Two Step Reamer Drill Bits with Stepped Tip—5/16"-9/16" Dia. (increments of 1/16"), 9/16"-13/16" Dia. (increments of 1/16")
    Four Reamers for Hole Alignment—1/2", 9/16", 11/16", 13/16" Reamer Sizes
    Three Drill Taps—5/16"-18 Thread Size × 1/4" Drill Bit Size, 3/8"-16 Thread Size × 5/16" Drill Bit Size, 1/2"-13 Thread Size × 27/64" Drill Bit Size
    Five Hollow-Core Cutters for Power Drills with 2 1/4" Cutting Dp.—9/16", 5/8", 3/4", 7/8", 1" Dia.
    One Quick-Change Chuck for Impact Wrenches—For 1/2" Square Drive
    One Quick-Change Chuck for Impact Drivers—1/4" Quick-Change Hex Shank
    One Quick-Change Chuck for Magnetic-Base Drills—3/4" Weldon Shank
    One 5" Extension
    One 12" Extension    		VersaDrive Hex7/16"Plastic Case9639N1200000000
    Accessories for Tap, Drill Bit, and Reamer Sets
    Chucks for Impact Wrenches
    Image of Product. Quick-Change. Front orientation. Impact Wrench Chucks. Quick-Change Pull-Back Tool Release.

    Quick-Change

    Image of Product. Strong-Hold. Back orientation. Impact Wrench Chucks. Strong-Hold Push-Forward Tool Release.

    Strong-Hold

    These chucks mount directly onto the square drive of your impact wrench. They work with any tool with a VersaDrive hex shank, so you don’t need to swap chucks to use countersinks, extractors, and other tools.
    Quick-Change Pull-Back Tool Release—Require just one hand to load. Push your tool in the chuck until you hear the ball detents click into place. To remove your tool, pull back the collar.
    Strong-Hold Push-Forward Tool Release—Hold cutting tools more securely than quick-change chucks. To insert and remove cutting tools, you must push a collar forward. Since impact force drives your cutting tool the opposite way, it can’t come loose from the chuck while you work.
    Manganese Phosphate-Coated Steel—The coating on these chucks prevents rust.
    For
    Shank
    For Square
    Drive Size
    Type
    Size
    Overall
    Lg.
    Material
    Includes
    Each
    Quick-Change Pull-Back Tool Release
    1/2"VersaDrive Hex7/16"2 5/32"Black-Oxide SteelRetaining Ring, Retention Pin9589N112000000
     
    Strong-Hold Push-Forward Tool Release
    3/8"VersaDrive Hex7/16"2"Manganese Phosphate-Coated SteelRetaining Ring, Retention Pin9589N111000000
    1/2"VersaDrive Hex7/16"2 5/32"Manganese Phosphate-Coated SteelRetaining Ring, Retention Pin9589N113000000
    3/4"VersaDrive Hex7/16"2 3/8"Manganese Phosphate-Coated SteelRetaining Ring, Retention Pin9589N114000000
     
    Chucks for Impact Drivers
    Image of Product. Front orientation. Impact Driver Chucks.
    The 1/4" hex shank fits into impact drivers. These chucks work with any tool with a VersaDrive hex shank.
    Quick-Change Pull-Back Tool Release—Require just one hand to load. Push your tool in the chuck until you hear the ball detents click into place. To remove your tool, pull back the collar.
    Shank
    For
    Shank
    Type
    Size
    Type
    Size
    Overall
    Lg.
    Material
    Each
    Quick-Change Pull-Back Tool Release
    Quick-Change Hex1/4"VersaDrive Hex7/16"3"Black-Oxide Steel9594N111000000
     
    Chucks for Magnetic-Base Drills
    Image of Product. Front orientation. Magnetic-Base Drill Chucks and Adapters.
    The 3/4" shank fits into magnetic-base drills. These chucks accept any tool with a VersaDrive hex shank.
    Quick-Change Pull-Back Tool Release—Require just one hand to load. Push your tool in the chuck until you hear the ball detents click into place. To remove your tool, pull back the collar.
    Shank
    For
    Shank
    Type
    Size
    Type
    Size
    Overall
    Lg.
    Material
    Each
    Quick-Change Pull-Back Tool Release
    Weldon3/4"VersaDrive Hex7/16"2 9/32"Black-Oxide Steel9585N111000000
     
    Extensions
    Image of Product. Front orientation. Impact Wrench Chuck Extensions.
    Extend your cutting tool’s reach. These extensions attach to your chuck and accept any tool with a VersaDrive hex shank.
    Quick-Change Pull-Back Tool Release—Require just one hand to load. Push your tool in the chuck until you hear the ball detents click into place. To remove your tool, pull back the collar.
    For
    Shank
    Shank
    Overall
    Lg.
    Type
    Size
    Type
    Size
    OD
    Material
    Each
    Quick-Change Pull-Back Tool Release
    5"VersaDrive Hex7/16"VersaDrive Hex7/16"1 7/64"Black-Oxide Steel9589N115000000
    12"VersaDrive Hex7/16"VersaDrive Hex7/16"1 7/64"Black-Oxide Steel9589N11600000
     
    back to top