Drill and tap a variety of hole sizes. These taps and drill bits are for use on metal and plastic.

Also known as gun taps, the taps in these sets have spiral-point flutes that push chips ahead of the tap and out of through holes. Because they don't need to be reversed to prevent buildup, they produce threads more efficiently than standard taps and are suitable for production work. Taps have a square shank for compatibility with tap wrenches and tap holders for drill presses and milling machines. With a plug chamfer, they have 3-5 chamfered cutting threads, so they're suitable for start-to-finish tapping. All taps and drill bits are made of high-speed steel for use on most metal and plastic.

What you need to add or repair threads quickly in parts under stress or vibration. These inserts come with a closed-end tap, a drill bit, and an installation bit. Also known as E-Z Lok, they have Loctite® adhesive already applied, and the adhesive reaches full strength after 72 hours.

Cut a variety of thread sizes into aluminum and other soft metal—no taps required. These inserts cut their own threads and lock into material, so they won’t budge when you install or remove a screw. To install inserts with a wrench, thread an insert and two hex nuts onto a bolt. Then, grip and turn the top nut to drive into a drilled hole. If you need to add a lot of threaded connections quickly, use an installation tool (not included) with a ratchet wrench or drill press. These inserts are comparable to Tap-Lok inserts.

Quickly restore stripped threads—these inserts come with through-hole taps and installation tools. The tough coils on these inserts expand once installed to anchor in a tapped hole.

Drill holes and cut threads without switching tools. Made of high-speed steel, these taps are for use on most metal and plastic. The square shank is compatible with tap holders for drill presses and milling machines. All have a plug chamfer with 3-5 chamfered cutting threads, so they're suitable for start-to-finish tapping.

Drawers and labeled compartments provide space for keeping tools organized. Taps and drill bits are not included.

Limit runout and slippage under heavy cutting forces from CNC machines. These chucks have an integrated arbor for a one-piece design that makes them more accurate and compact than chucks with a separate arbor. Made of hardened steel, they resist wear from repeated use. Their shank is precision ground to the industry standard AT3 tolerance for a tight fit in your spindle. They meet JIS standards for compatibility across machines with BT spindles. They have a threaded hole that accepts retention knobs, so they connect to your machine’s drawbar system.

Repair damaged threads or create new ones. These convenient assortments include helical inserts, an installation tool for each thread size, a drill bit, and a tap. The inserts are also known as Heli-Coil inserts.

Cut the cleanest, quickest threads in a range of sizes without ever stopping for chips. Made with an oversized shank and hardened high-speed steel, the taps in these sets are built to handle the high torque of impact wrenches for smooth, continuous cutting. The rapid hammering breaks up chips and spiral flutes pull them out of the hole, so you never have to pause and reverse to clear them. They can thread both blind and through holes 15 times faster than by hand. They’re a good choice for threading large holes and working with hard metals.

You’ll need a VersaDrive chuck (sold separately) to install these taps into your impact wrench.

Cut the cleanest, quickest threads without ever stopping for chips. Made with an oversized shank and hardened high-speed steel, these taps are built to handle the high torque of impact wrenches for smooth, continuous cutting. The rapid hammering breaks up chips and spiral flutes pull them out of the hole, so you never have to pause and reverse to clear them. They can thread both blind and through holes 15 times faster than by hand. They’re a good choice for threading large holes and working with hard metals.

You’ll need a VersaDrive chuck (sold separately) to install these taps into your impact wrench.

Cut a range of hole sizes two times faster than power drills, then thread them 15 times faster than by hand. Made with an oversized shank and hardened high-speed steel, the tools in these sets are built to handle the high torque of impact wrenches without snapping. The drill bits have a built-in pilot with a stepped tip that centers the bit, prevents slipping, and drills with one third the pressure of standard bits. Your wrench’s rapid hammering keeps the taps moving forward for smooth, continuous cutting. Those rapid blows also help break and clear chips as you cut, so you don’t need to pause and reverse, even in large holes and tough materials. Since your wrench absorbs kickback, it won’t fight you when a cutting tool snags, reducing wrist strain and fatigue over long jobs.

You’ll need a VersaDrive chuck (sold separately) to install the bits and taps into your impact wrench. You can also get chucks for impact drivers and magnetic-base drills (both sold separately). For jobs that don’t require the torque of an impact tool, you can fit these drill bits and taps directly into a _1/2" chuck on a standard power drill.