McMaster-Carr logo
    Forward
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Print
    How can we improve?
    Comments
    E-mail address (if you would like a response)
    550 Products

    Metric Press-Fit Drill Bushings with Head

    Image of Product. Front orientation. Contains Annotated. Drill Bushings. Metric Press-Fit Drill Bushings with Head.
    Image of Attribute. Front orientation. Contains Annotated. Drill Bushings. Metric Press-Fit Drill Bushings with Head.
    Image of Specification. Shown in Countersunk Hole. Front orientation. CrossSection view. Drill Bushings. Metric Press-Fit Drill Bushings with Head.
    Image of Specification. Shown in Standard Hole. Front orientation. CrossSection view. Drill Bushings. Metric Press-Fit Drill Bushings with Head.

    Shown in

    Countersunk

    Hole

    Shown in

    Standard Hole

    Even under extreme drilling pressure, these metric bushings won't press through your jig plate. They’re ANSI Type H bushings, also known as headed bushings. A flanged head acts as a stop, so these bushings won’t move as you push down your drill bit, reamer, or other cutting bit. Use them even in jigs made of thin or soft materials—the head adds support to protect your jig from damage caused by heavy use. Drill bushings ensure accurate, consistent cuts and drilled holes from one part to the next. They’re also used as spacers, shims, and machinery bushings. Made of hardened, ground steel, these bushings hold their shape and resist wear, so they last for many cycles without needing to be replaced.
    These bushings meet DIN 172 dimensional standards. This standard is no longer active, but it’s often used as a reference point for making sure parts are compatible with other parts and tools.
    To install, fit the bushing into a hole in your jig. In a standard hole, the head will sit above the jig plate; to mount flush, install in a countersunk hole. A chamfered edge on the bottom of the bushing helps center the bushing in the hole. Once it’s centered, press the bushing into the hole with a hydraulic or lever press.
    Head,
    mm
    Tolerance,
    mm
    Each
    OD,
    mm
    Lg.,
    mm
    For Drill
    Bit Size, mm
    For Drill Bit Size
    Decimal Equiv.
    OD
    Thk.
    ID
    OD
    Lg.
    Drill Bushing
    Type
    Material
    Hardness
    Specs.
    Met
    1-5
    6-11
    12-Up
    0.6 mm ID
    340.60.0236"620.006 to 0.0160.004 to 0.01-0.1 to 0.1HSteelRockwell C61DIN 17296977A102000000000000000000
     
    0.7 mm ID
    340.70.0276"620.006 to 0.0160.004 to 0.01-0.1 to 0.1HSteelRockwell C61DIN 17296977A103000000000000000
     
    0.8 mm ID
    340.80.0315"620.006 to 0.0160.004 to 0.01-0.1 to 0.1HSteelRockwell C61DIN 17296977A104000000000000000
     
    0.9 mm ID
    340.90.0354"620.006 to 0.0160.004 to 0.01-0.1 to 0.1HSteelRockwell C61DIN 17296977A105000000000000000
     
    1 mm ID
    3410.0394"620.006 to 0.0160.004 to 0.01-0.1 to 0.1HSteelRockwell C61DIN 17296977A107000000000000000
    3710.0394"620.006 to 0.0160.004 to 0.01-0.2 to 0.2HSteelRockwell C61DIN 17296977A108000000000000000
     
    1.1 mm ID
    471.10.0433"720.006 to 0.0160.008 to 0.016-0.2 to 0.2HSteelRockwell C61DIN 17296977A110000000000000000
     
    1.2 mm ID
    441.20.0472"720.006 to 0.0160.008 to 0.016-0.1 to 0.1HSteelRockwell C61DIN 17296977A1110000000000000
    471.20.0472"720.006 to 0.0160.008 to 0.016-0.2 to 0.2HSteelRockwell C61DIN 17296977A112000000000000000
     
    1.3 mm ID
    441.30.0512"720.006 to 0.0160.008 to 0.016-0.1 to 0.1HSteelRockwell C61DIN 17296977A1130000000000000
    471.30.0512"720.006 to 0.0160.008 to 0.016-0.2 to 0.2HSteelRockwell C61DIN 17296977A114000000000000000
     
    1.4 mm ID
    441.40.0551"720.006 to 0.0160.008 to 0.016-0.1 to 0.1HSteelRockwell C61DIN 17296977A1150000000000000
     
    1.5 mm ID
    441.50.0591"720.006 to 0.0160.008 to 0.016-0.1 to 0.1HSteelRockwell C61DIN 17296977A1170000000000000
    471.50.0591"720.006 to 0.0160.008 to 0.016-0.2 to 0.2HSteelRockwell C61DIN 17296977A118000000000000000
     
    1.6 mm ID
    441.60.063"720.006 to 0.0160.008 to 0.016-0.1 to 0.1HSteelRockwell C61DIN 17296977A1190000000000000
    471.60.063"720.006 to 0.0160.008 to 0.016-0.2 to 0.2HSteelRockwell C61DIN 17296977A120000000000000000
     
    1.7 mm ID
    441.70.0669"720.006 to 0.0160.008 to 0.016-0.1 to 0.1HSteelRockwell C61DIN 17296977A1210000000000000
     
    1.8 mm ID
    441.80.0709"720.006 to 0.0160.008 to 0.016-0.1 to 0.1HSteelRockwell C61DIN 17296977A1230000000000000
    471.80.0709"720.006 to 0.0160.008 to 0.016-0.2 to 0.2HSteelRockwell C61DIN 17296977A124000000000000000
     
    1.9 mm ID
    541.90.0748"820.006 to 0.0160.008 to 0.016-0.1 to 0.1HSteelRockwell C61DIN 17296977A125000000000000
     
    2 mm ID
    5420.0787"820.006 to 0.0160.008 to 0.016-0.1 to 0.1HSteelRockwell C61DIN 17296977A127000000000000
    5720.0787"820.006 to 0.0160.008 to 0.016-0.2 to 0.2HSteelRockwell C61DIN 17296977A128000000000000
     
    2.1 mm ID
    542.10.0827"820.006 to 0.0160.008 to 0.016-0.1 to 0.1HSteelRockwell C61DIN 17296977A129000000000000
    572.10.0827"820.006 to 0.0160.008 to 0.016-0.2 to 0.2HSteelRockwell C61DIN 17296977A130000000000000
     
    2.2 mm ID
    542.20.0866"820.006 to 0.0160.008 to 0.016-0.1 to 0.1HSteelRockwell C61DIN 17296977A131000000000000
    572.20.0866"820.006 to 0.0160.008 to 0.016-0.2 to 0.2HSteelRockwell C61DIN 17296977A132000000000000
     
    2.3 mm ID
    542.30.0906"820.006 to 0.0160.008 to 0.016-0.1 to 0.1HSteelRockwell C61DIN 17296977A133000000000000
    572.30.0906"820.006 to 0.0160.008 to 0.016-0.2 to 0.2HSteelRockwell C61DIN 17296977A134000000000000
     
    2.4 mm ID
    542.40.0945"820.006 to 0.0160.008 to 0.016-0.1 to 0.1HSteelRockwell C61DIN 17296977A135000000000000
    572.40.0945"820.006 to 0.0160.008 to 0.016-0.2 to 0.2HSteelRockwell C61DIN 17296977A136000000000000
     
    2.5 mm ID
    542.50.0984"820.006 to 0.0160.008 to 0.016-0.1 to 0.1HSteelRockwell C61DIN 17296977A137000000000000
    572.50.0984"820.006 to 0.0160.008 to 0.016-0.2 to 0.2HSteelRockwell C61DIN 17296977A138000000000000
     
    2.6 mm ID
    542.60.1024"820.006 to 0.0160.008 to 0.016-0.1 to 0.1HSteelRockwell C61DIN 17296977A139000000000000
    572.60.1024"820.006 to 0.0160.008 to 0.016-0.2 to 0.2HSteelRockwell C61DIN 17296977A140000000000000
     
    2.7 mm ID
    65.52.70.1063"92.50.006 to 0.0160.008 to 0.016-0.2 to 0.2HSteelRockwell C61DIN 17296977A141000000000000
    69.52.70.1063"92.50.006 to 0.0160.008 to 0.016-0.2 to 0.2HSteelRockwell C61DIN 17296977A142000000000000
    613.52.70.1063"92.50.006 to 0.0160.008 to 0.016-0.2 to 0.2HSteelRockwell C61DIN 17296977A143000000000000000
     
    2.8 mm ID
    65.52.80.1102"92.50.006 to 0.0160.008 to 0.016-0.2 to 0.2HSteelRockwell C61DIN 17296977A144000000000000
    69.52.80.1102"92.50.006 to 0.0160.008 to 0.016-0.2 to 0.2HSteelRockwell C61DIN 17296977A145000000000000
     
    2.9 mm ID
    65.52.90.1142"92.50.006 to 0.0160.008 to 0.016-0.2 to 0.2HSteelRockwell C61DIN 17296977A147000000000000
    69.52.90.1142"92.50.006 to 0.0160.008 to 0.016-0.2 to 0.2HSteelRockwell C61DIN 17296977A148000000000000
     
    3 mm ID
    65.530.1181"92.50.006 to 0.0160.008 to 0.016-0.2 to 0.2HSteelRockwell C61DIN 17296977A150000000000000
    69.530.1181"92.50.006 to 0.0160.008 to 0.016-0.2 to 0.2HSteelRockwell C61DIN 17296977A151000000000000
    613.530.1181"92.50.006 to 0.0160.008 to 0.016-0.2 to 0.2HSteelRockwell C61DIN 17296977A152000000000000000
     
    3.1 mm ID
    65.53.10.122"92.50.01 to 0.0220.008 to 0.016-0.2 to 0.2HSteelRockwell C61DIN 17296977A153000000000000
    69.53.10.122"92.50.01 to 0.0220.008 to 0.016-0.2 to 0.2HSteelRockwell C61DIN 17296977A154000000000000
    613.53.10.122"92.50.01 to 0.0220.008 to 0.016-0.2 to 0.2HSteelRockwell C61DIN 17296977A155000000000000000
     
    3.2 mm ID
    65.53.20.126"92.50.01 to 0.0220.008 to 0.016-0.2 to 0.2HSteelRockwell C61DIN 17296977A156000000000000
    69.53.20.126"92.50.01 to 0.0220.008 to 0.016-0.2 to 0.2HSteelRockwell C61DIN 17296977A157000000000000
    613.53.20.126"92.50.01 to 0.0220.008 to 0.016-0.2 to 0.2HSteelRockwell C61DIN 17296977A158000000000000000
     
    3.3 mm ID
    65.53.30.1299"92.50.01 to 0.0220.008 to 0.016-0.2 to 0.2HSteelRockwell C61DIN 17296977A159000000000000
    69.53.30.1299"92.50.01 to 0.0220.008 to 0.016-0.2 to 0.2HSteelRockwell C61DIN 17296977A160000000000000
    613.53.30.1299"92.50.01 to 0.0220.008 to 0.016-0.2 to 0.2HSteelRockwell C61DIN 17296977A161000000000000000
     
    3.4 mm ID
    75.53.40.1339"102.50.01 to 0.0220.01 to 0.019-0.2 to 0.2HSteelRockwell C61DIN 17296977A162000000000000
    79.53.40.1339"102.50.01 to 0.0220.01 to 0.019-0.2 to 0.2HSteelRockwell C61DIN 17296977A163000000000000
    713.53.40.1339"102.50.01 to 0.0220.01 to 0.019-0.2 to 0.2HSteelRockwell C61DIN 17296977A164000000000000000
     
    3.5 mm ID
    75.53.50.1378"102.50.01 to 0.0220.01 to 0.019-0.2 to 0.2HSteelRockwell C61DIN 17296977A165000000000000
    79.53.50.1378"102.50.01 to 0.0220.01 to 0.019-0.2 to 0.2HSteelRockwell C61DIN 17296977A166000000000000
    713.53.50.1378"102.50.01 to 0.0220.01 to 0.019-0.2 to 0.2HSteelRockwell C61DIN 17296977A167000000000000000
     
    3.6 mm ID
    75.53.60.1417"102.50.01 to 0.0220.01 to 0.019-0.2 to 0.2HSteelRockwell C61DIN 17296977A168000000000000
    713.53.60.1417"102.50.01 to 0.0220.01 to 0.019-0.2 to 0.2HSteelRockwell C61DIN 17296977A170000000000000000
     
    3.7 mm ID
    79.53.70.1457"102.50.01 to 0.0220.01 to 0.019-0.2 to 0.2HSteelRockwell C61DIN 17296977A172000000000000
     
    3.8 mm ID
    79.53.80.1496"102.50.01 to 0.0220.01 to 0.019-0.2 to 0.2HSteelRockwell C61DIN 17296977A175000000000000
     
    3.9 mm ID
    79.53.90.1535"102.50.01 to 0.0220.01 to 0.019-0.2 to 0.2HSteelRockwell C61DIN 17296977A178000000000000
     
    4 mm ID
    75.540.1575"102.50.01 to 0.0220.01 to 0.019-0.2 to 0.2HSteelRockwell C61DIN 17296977A180000000000000
    79.540.1575"102.50.01 to 0.0220.01 to 0.019-0.2 to 0.2HSteelRockwell C61DIN 17296977A181000000000000
    713.540.1575"102.50.01 to 0.0220.01 to 0.019-0.2 to 0.2HSteelRockwell C61DIN 17296977A182000000000000000
     
    4.1 mm ID
    85.54.10.1614"112.50.01 to 0.0220.01 to 0.019-0.2 to 0.2HSteelRockwell C61DIN 17296977A183000000000000
    89.54.10.1614"112.50.01 to 0.0220.01 to 0.019-0.2 to 0.2HSteelRockwell C61DIN 17296977A184000000000000
    813.54.10.1614"112.50.01 to 0.0220.01 to 0.019-0.2 to 0.2HSteelRockwell C61DIN 17296977A185000000000000000
     
    4.2 mm ID
    85.54.20.1654"112.50.01 to 0.0220.01 to 0.019-0.2 to 0.2HSteelRockwell C61DIN 17296977A186000000000000
    89.54.20.1654"112.50.01 to 0.0220.01 to 0.019-0.2 to 0.2HSteelRockwell C61DIN 17296977A187000000000000
    813.54.20.1654"112.50.01 to 0.0220.01 to 0.019-0.2 to 0.2HSteelRockwell C61DIN 17296977A188000000000000000
     
    4.3 mm ID
    85.54.30.1693"112.50.01 to 0.0220.01 to 0.019-0.2 to 0.2HSteelRockwell C61DIN 17296977A189000000000000
    89.54.30.1693"112.50.01 to 0.0220.01 to 0.019-0.2 to 0.2HSteelRockwell C61DIN 17296977A190000000000000
    813.54.30.1693"112.50.01 to 0.0220.01 to 0.019-0.2 to 0.2HSteelRockwell C61DIN 17296977A191000000000000000
     
    4.4 mm ID
    85.54.40.1732"112.50.01 to 0.0220.01 to 0.019-0.2 to 0.2HSteelRockwell C61DIN 17296977A192000000000000
    89.54.40.1732"112.50.01 to 0.0220.01 to 0.019-0.2 to 0.2HSteelRockwell C61DIN 17296977A193000000000000
     
    4.5 mm ID
    85.54.50.1772"112.50.01 to 0.0220.01 to 0.019-0.2 to 0.2HSteelRockwell C61DIN 17296977A195000000000000
    89.54.50.1772"112.50.01 to 0.0220.01 to 0.019-0.2 to 0.2HSteelRockwell C61DIN 17296977A196000000000000
    813.54.50.1772"112.50.01 to 0.0220.01 to 0.019-0.2 to 0.2HSteelRockwell C61DIN 17296977A197000000000000000
     
    4.6 mm ID
    85.54.60.1811"112.50.01 to 0.0220.01 to 0.019-0.2 to 0.2HSteelRockwell C61DIN 17296977A198000000000000
     
    4.7 mm ID
    85.54.70.185"112.50.01 to 0.0220.01 to 0.019-0.2 to 0.2HSteelRockwell C61DIN 17296977A201000000000000
    89.54.70.185"112.50.01 to 0.0220.01 to 0.019-0.2 to 0.2HSteelRockwell C61DIN 17296977A202000000000000
     
    4.8 mm ID
    85.54.80.189"112.50.01 to 0.0220.01 to 0.019-0.2 to 0.2HSteelRockwell C61DIN 17296977A204000000000000
    89.54.80.189"112.50.01 to 0.0220.01 to 0.019-0.2 to 0.2HSteelRockwell C61DIN 17296977A205000000000000
    813.54.80.189"112.50.01 to 0.0220.01 to 0.019-0.2 to 0.2HSteelRockwell C61DIN 17296977A206000000000000000
     
    4.9 mm ID
    85.54.90.1929"112.50.01 to 0.0220.01 to 0.019-0.2 to 0.2HSteelRockwell C61DIN 17296977A207000000000000
    89.54.90.1929"112.50.01 to 0.0220.01 to 0.019-0.2 to 0.2HSteelRockwell C61DIN 17296977A208000000000000
     
    5 mm ID
    85.550.1969"112.50.01 to 0.0220.01 to 0.019-0.2 to 0.2HSteelRockwell C61DIN 17296977A210000000000000
    89.550.1969"112.50.01 to 0.0220.01 to 0.019-0.2 to 0.2HSteelRockwell C61DIN 17296977A211000000000000
    813.550.1969"112.50.01 to 0.0220.01 to 0.019-0.2 to 0.2HSteelRockwell C61DIN 17296977A212000000000000000
     
    5.1 mm ID
    1075.10.2008"1330.01 to 0.0220.01 to 0.019-0.2 to 0.2HSteelRockwell C61DIN 17296977A213000000000000
    10135.10.2008"1330.01 to 0.0220.01 to 0.019-0.2 to 0.2HSteelRockwell C61DIN 17296977A2140000000000000
    10175.10.2008"1330.01 to 0.0220.01 to 0.019-0.2 to 0.2HSteelRockwell C61DIN 17296977A215000000000000000
     
    5.2 mm ID
    1075.20.2047"1330.01 to 0.0220.01 to 0.019-0.2 to 0.2HSteelRockwell C61DIN 17296977A216000000000000
    10135.20.2047"1330.01 to 0.0220.01 to 0.019-0.2 to 0.2HSteelRockwell C61DIN 17296977A2170000000000000
    10175.20.2047"1330.01 to 0.0220.01 to 0.019-0.2 to 0.2HSteelRockwell C61DIN 17296977A218000000000000000
     
    5.3 mm ID
    1075.30.2087"1330.01 to 0.0220.01 to 0.019-0.2 to 0.2HSteelRockwell C61DIN 17296977A219000000000000
    10135.30.2087"1330.01 to 0.0220.01 to 0.019-0.2 to 0.2HSteelRockwell C61DIN 17296977A2200000000000000
     
    5.4 mm ID
    1075.40.2126"1330.01 to 0.0220.01 to 0.019-0.2 to 0.2HSteelRockwell C61DIN 17296977A222000000000000
    10135.40.2126"1330.01 to 0.0220.01 to 0.019-0.2 to 0.2HSteelRockwell C61DIN 17296977A2230000000000000
     
    5.5 mm ID
    1075.50.2165"1330.01 to 0.0220.01 to 0.019-0.2 to 0.2HSteelRockwell C61DIN 17296977A225000000000000
    10135.50.2165"1330.01 to 0.0220.01 to 0.019-0.2 to 0.2HSteelRockwell C61DIN 17296977A2260000000000000
    10175.50.2165"1330.01 to 0.0220.01 to 0.019-0.2 to 0.2HSteelRockwell C61DIN 17296977A227000000000000000
     
    5.6 mm ID
    1075.60.2205"1330.01 to 0.0220.01 to 0.019-0.2 to 0.2HSteelRockwell C61DIN 17296977A228000000000000
    10135.60.2205"1330.01 to 0.0220.01 to 0.019-0.2 to 0.2HSteelRockwell C61DIN 17296977A2290000000000000
    10175.60.2205"1330.01 to 0.0220.01 to 0.019-0.2 to 0.2HSteelRockwell C61DIN 17296977A230000000000000000
     
    5.7 mm ID
    10135.70.2244"1330.01 to 0.0220.01 to 0.019-0.2 to 0.2HSteelRockwell C61DIN 17296977A2320000000000000
     
    5.8 mm ID
    1075.80.2283"1330.01 to 0.0220.01 to 0.019-0.2 to 0.2HSteelRockwell C61DIN 17296977A234000000000000
    10135.80.2283"1330.01 to 0.0220.01 to 0.019-0.2 to 0.2HSteelRockwell C61DIN 17296977A2350000000000000
     
    5.9 mm ID
    1075.90.2323"1330.01 to 0.0220.01 to 0.019-0.2 to 0.2HSteelRockwell C61DIN 17296977A237000000000000
     
    6 mm ID
    10760.2362"1330.01 to 0.0220.01 to 0.019-0.2 to 0.2HSteelRockwell C61DIN 17296977A240000000000000
    101360.2362"1330.01 to 0.0220.01 to 0.019-0.2 to 0.2HSteelRockwell C61DIN 17296977A2410000000000000
    101760.2362"1330.01 to 0.0220.01 to 0.019-0.2 to 0.2HSteelRockwell C61DIN 17296977A242000000000000000
     
    6.1 mm ID
    1276.10.2402"1530.013 to 0.0280.012 to 0.023-0.2 to 0.2HSteelRockwell C61DIN 17296977A2430000000000000
    12136.10.2402"1530.013 to 0.0280.012 to 0.023-0.2 to 0.2HSteelRockwell C61DIN 17296977A2440000000000000
    12176.10.2402"1530.013 to 0.0280.012 to 0.023-0.2 to 0.2HSteelRockwell C61DIN 17296977A245000000000000000
     
    6.2 mm ID
    1276.20.2441"1530.013 to 0.0280.012 to 0.023-0.2 to 0.2HSteelRockwell C61DIN 17296977A2460000000000000
    12136.20.2441"1530.013 to 0.0280.012 to 0.023-0.2 to 0.2HSteelRockwell C61DIN 17296977A2470000000000000
    12176.20.2441"1530.013 to 0.0280.012 to 0.023-0.2 to 0.2HSteelRockwell C61DIN 17296977A248000000000000000
     
    6.3 mm ID
    1276.30.248"1530.013 to 0.0280.012 to 0.023-0.2 to 0.2HSteelRockwell C61DIN 17296977A2490000000000000
    12136.30.248"1530.013 to 0.0280.012 to 0.023-0.2 to 0.2HSteelRockwell C61DIN 17296977A2500000000000000
    12176.30.248"1530.013 to 0.0280.012 to 0.023-0.2 to 0.2HSteelRockwell C61DIN 17296977A251000000000000000
     
    6.4 mm ID
    1276.40.252"1530.013 to 0.0280.012 to 0.023-0.2 to 0.2HSteelRockwell C61DIN 17296977A2520000000000000
    12136.40.252"1530.013 to 0.0280.012 to 0.023-0.2 to 0.2HSteelRockwell C61DIN 17296977A2530000000000000
    12176.40.252"1530.013 to 0.0280.012 to 0.023-0.2 to 0.2HSteelRockwell C61DIN 17296977A254000000000000000
     
    6.5 mm ID
    1276.50.2559"1530.013 to 0.0280.012 to 0.023-0.2 to 0.2HSteelRockwell C61DIN 17296977A2550000000000000
    12136.50.2559"1530.013 to 0.0280.012 to 0.023-0.2 to 0.2HSteelRockwell C61DIN 17296977A2560000000000000
    12176.50.2559"1530.013 to 0.0280.012 to 0.023-0.2 to 0.2HSteelRockwell C61DIN 17296977A257000000000000000
     
    6.6 mm ID
    1276.60.2598"1530.013 to 0.0280.012 to 0.023-0.2 to 0.2HSteelRockwell C61DIN 17296977A2580000000000000
    12136.60.2598"1530.013 to 0.0280.012 to 0.023-0.2 to 0.2HSteelRockwell C61DIN 17296977A2590000000000000
    12176.60.2598"1530.013 to 0.0280.012 to 0.023-0.2 to 0.2HSteelRockwell C61DIN 17296977A260000000000000000
     
    6.7 mm ID
    1276.70.2638"1530.013 to 0.0280.012 to 0.023-0.2 to 0.2HSteelRockwell C61DIN 17296977A2610000000000000
    12136.70.2638"1530.013 to 0.0280.012 to 0.023-0.2 to 0.2HSteelRockwell C61DIN 17296977A2620000000000000
    12176.70.2638"1530.013 to 0.0280.012 to 0.023-0.2 to 0.2HSteelRockwell C61DIN 17296977A263000000000000000
     
    6.8 mm ID
    1276.80.2677"1530.013 to 0.0280.012 to 0.023-0.2 to 0.2HSteelRockwell C61DIN 17296977A2640000000000000
    12136.80.2677"1530.013 to 0.0280.012 to 0.023-0.2 to 0.2HSteelRockwell C61DIN 17296977A2650000000000000
    12176.80.2677"1530.013 to 0.0280.012 to 0.023-0.2 to 0.2HSteelRockwell C61DIN 17296977A266000000000000000
     
    6.9 mm ID
    1276.90.2717"1530.013 to 0.0280.012 to 0.023-0.2 to 0.2HSteelRockwell C61DIN 17296977A2670000000000000
    12176.90.2717"1530.013 to 0.0280.012 to 0.023-0.2 to 0.2HSteelRockwell C61DIN 17296977A269000000000000000
     
    7 mm ID
    12770.2756"1530.013 to 0.0280.012 to 0.023-0.2 to 0.2HSteelRockwell C61DIN 17296977A2700000000000000
    121370.2756"1530.013 to 0.0280.012 to 0.023-0.2 to 0.2HSteelRockwell C61DIN 17296977A2710000000000000
    121770.2756"1530.013 to 0.0280.012 to 0.023-0.2 to 0.2HSteelRockwell C61DIN 17296977A272000000000000000
     
    7.1 mm ID
    1277.10.2795"1530.013 to 0.0280.012 to 0.023-0.2 to 0.2HSteelRockwell C61DIN 17296977A2730000000000000
    12137.10.2795"1530.013 to 0.0280.012 to 0.023-0.2 to 0.2HSteelRockwell C61DIN 17296977A2740000000000000
    12177.10.2795"1530.013 to 0.0280.012 to 0.023-0.2 to 0.2HSteelRockwell C61DIN 17296977A275000000000000000
     
    7.2 mm ID
    1277.20.2835"1530.013 to 0.0280.012 to 0.023-0.2 to 0.2HSteelRockwell C61DIN 17296977A2760000000000000
    12137.20.2835"1530.013 to 0.0280.012 to 0.023-0.2 to 0.2HSteelRockwell C61DIN 17296977A2770000000000000
    12177.20.2835"1530.013 to 0.0280.012 to 0.023-0.2 to 0.2HSteelRockwell C61DIN 17296977A278000000000000000
     
    7.3 mm ID
    12137.30.2874"1530.013 to 0.0280.012 to 0.023-0.2 to 0.2HSteelRockwell C61DIN 17296977A2800000000000000
     
    7.4 mm ID
    12137.40.2913"1530.013 to 0.0280.012 to 0.023-0.2 to 0.2HSteelRockwell C61DIN 17296977A2830000000000000
     
    7.5 mm ID
    1277.50.2953"1530.013 to 0.0280.012 to 0.023-0.2 to 0.2HSteelRockwell C61DIN 17296977A2850000000000000
    12137.50.2953"1530.013 to 0.0280.012 to 0.023-0.2 to 0.2HSteelRockwell C61DIN 17296977A2860000000000000
    12177.50.2953"1530.013 to 0.0280.012 to 0.023-0.2 to 0.2HSteelRockwell C61DIN 17296977A287000000000000000
     
    7.6 mm ID
    1277.60.2992"1530.013 to 0.0280.012 to 0.023-0.2 to 0.2HSteelRockwell C61DIN 17296977A2880000000000000
    12137.60.2992"1530.013 to 0.0280.012 to 0.023-0.2 to 0.2HSteelRockwell C61DIN 17296977A2890000000000000
     
    7.7 mm ID
    1277.70.3031"1530.013 to 0.0280.012 to 0.023-0.2 to 0.2HSteelRockwell C61DIN 17296977A2910000000000000
     
    7.8 mm ID
    12137.80.3071"1530.013 to 0.0280.012 to 0.023-0.2 to 0.2HSteelRockwell C61DIN 17296977A2950000000000000
     
    7.9 mm ID
    1277.90.311"1530.013 to 0.0280.012 to 0.023-0.2 to 0.2HSteelRockwell C61DIN 17296977A2970000000000000
    12137.90.311"1530.013 to 0.0280.012 to 0.023-0.2 to 0.2HSteelRockwell C61DIN 17296977A2980000000000000
     
    8 mm ID
    1278.00.315"1530.013 to 0.0280.012 to 0.023-0.2 to 0.2HSteelRockwell C61DIN 17296977A3000000000000000
    12138.00.315"1530.013 to 0.0280.012 to 0.023-0.2 to 0.2HSteelRockwell C61DIN 17296977A3010000000000000
    12178.00.315"1530.013 to 0.0280.012 to 0.023-0.2 to 0.2HSteelRockwell C61DIN 17296977A302000000000000000
     
    8.1 mm ID
    1598.10.3189"1830.013 to 0.0280.012 to 0.023-0.2 to 0.2HSteelRockwell C61DIN 17296977A3030000000000000
    15178.10.3189"1830.013 to 0.0280.012 to 0.023-0.2 to 0.2HSteelRockwell C61DIN 17296977A30400000000000000
    15228.10.3189"1830.013 to 0.0280.012 to 0.023-0.2 to 0.2HSteelRockwell C61DIN 17296977A305000000000000000
     
    8.2 mm ID
    1598.20.3228"1830.013 to 0.0280.012 to 0.023-0.2 to 0.2HSteelRockwell C61DIN 17296977A3060000000000000
    15178.20.3228"1830.013 to 0.0280.012 to 0.023-0.2 to 0.2HSteelRockwell C61DIN 17296977A30700000000000000
    15228.20.3228"1830.013 to 0.0280.012 to 0.023-0.2 to 0.2HSteelRockwell C61DIN 17296977A308000000000000000
     
    8.3 mm ID
    1598.30.3268"1830.013 to 0.0280.012 to 0.023-0.2 to 0.2HSteelRockwell C61DIN 17296977A3090000000000000
    15178.30.3268"1830.013 to 0.0280.012 to 0.023-0.2 to 0.2HSteelRockwell C61DIN 17296977A31000000000000000
     
    8.4 mm ID
    1598.40.3307"1830.013 to 0.0280.012 to 0.023-0.2 to 0.2HSteelRockwell C61DIN 17296977A3120000000000000
    15178.40.3307"1830.013 to 0.0280.012 to 0.023-0.2 to 0.2HSteelRockwell C61DIN 17296977A31300000000000000
     
    8.5 mm ID
    1598.50.3346"1830.013 to 0.0280.012 to 0.023-0.2 to 0.2HSteelRockwell C61DIN 17296977A3150000000000000
    15178.50.3346"1830.013 to 0.0280.012 to 0.023-0.2 to 0.2HSteelRockwell C61DIN 17296977A31600000000000000
    15228.50.3346"1830.013 to 0.0280.012 to 0.023-0.2 to 0.2HSteelRockwell C61DIN 17296977A317000000000000000
     
    8.6 mm ID
    1598.60.3386"1830.013 to 0.0280.012 to 0.023-0.2 to 0.2HSteelRockwell C61DIN 17296977A3180000000000000
    15178.60.3386"1830.013 to 0.0280.012 to 0.023-0.2 to 0.2HSteelRockwell C61DIN 17296977A31900000000000000
     
    8.7 mm ID
    1598.70.3425"1830.013 to 0.0280.012 to 0.023-0.2 to 0.2HSteelRockwell C61DIN 17296977A3210000000000000
     
    8.8 mm ID
    1598.80.3465"1830.013 to 0.0280.012 to 0.023-0.2 to 0.2HSteelRockwell C61DIN 17296977A3240000000000000
    15178.80.3465"1830.013 to 0.0280.012 to 0.023-0.2 to 0.2HSteelRockwell C61DIN 17296977A32500000000000000
     
    8.9 mm ID
    1598.90.3504"1830.013 to 0.0280.012 to 0.023-0.2 to 0.2HSteelRockwell C61DIN 17296977A3270000000000000
    15178.90.3504"1830.013 to 0.0280.012 to 0.023-0.2 to 0.2HSteelRockwell C61DIN 17296977A32800000000000000
     
    9 mm ID
    1599.00.3543"1830.013 to 0.0280.012 to 0.023-0.2 to 0.2HSteelRockwell C61DIN 17296977A3300000000000000
    15179.00.3543"1830.013 to 0.0280.012 to 0.023-0.2 to 0.2HSteelRockwell C61DIN 17296977A33100000000000000
    15229.00.3543"1830.013 to 0.0280.012 to 0.023-0.2 to 0.2HSteelRockwell C61DIN 17296977A332000000000000000
     
    9.1 mm ID
    1599.10.3583"1830.013 to 0.0280.012 to 0.023-0.2 to 0.2HSteelRockwell C61DIN 17296977A3330000000000000
     
    9.2 mm ID
    1599.20.3622"1830.013 to 0.0280.012 to 0.023-0.2 to 0.2HSteelRockwell C61DIN 17296977A3360000000000000
     
    9.3 mm ID
    1599.30.3661"1830.013 to 0.0280.012 to 0.023-0.2 to 0.2HSteelRockwell C61DIN 17296977A3390000000000000
     
    9.4 mm ID
    1599.40.3701"1830.013 to 0.0280.012 to 0.023-0.2 to 0.2HSteelRockwell C61DIN 17296977A3420000000000000
     
    9.5 mm ID
    1599.50.374"1830.013 to 0.0280.012 to 0.023-0.2 to 0.2HSteelRockwell C61DIN 17296977A3450000000000000
    15179.50.374"1830.013 to 0.0280.012 to 0.023-0.2 to 0.2HSteelRockwell C61DIN 17296977A34600000000000000
    15229.50.374"1830.013 to 0.0280.012 to 0.023-0.2 to 0.2HSteelRockwell C61DIN 17296977A347000000000000000
     
    9.6 mm ID
    1599.60.378"1830.013 to 0.0280.012 to 0.023-0.2 to 0.2HSteelRockwell C61DIN 17296977A3480000000000000
    15179.60.378"1830.013 to 0.0280.012 to 0.023-0.2 to 0.2HSteelRockwell C61DIN 17296977A34900000000000000
     
    9.7 mm ID
    15179.70.3819"1830.013 to 0.0280.012 to 0.023-0.2 to 0.2HSteelRockwell C61DIN 17296977A35200000000000000
    15229.70.3819"1830.013 to 0.0280.012 to 0.023-0.2 to 0.2HSteelRockwell C61DIN 17296977A353000000000000000
     
    9.8 mm ID
    15229.80.3858"1830.013 to 0.0280.012 to 0.023-0.2 to 0.2HSteelRockwell C61DIN 17296977A356000000000000000
     
    9.9 mm ID
    1599.90.3898"1830.013 to 0.0280.012 to 0.023-0.2 to 0.2HSteelRockwell C61DIN 17296977A3570000000000000
     
    10 mm ID
    15910
    		0.3937"1830.013 to 0.0280.012 to 0.023-0.2 to 0.2HSteelRockwell C61DIN 17296977A3600000000000000
    151710
    		0.3937"1830.013 to 0.0280.012 to 0.023-0.2 to 0.2HSteelRockwell C61DIN 17296977A36100000000000000
    152210
    		0.3937"1830.013 to 0.0280.012 to 0.023-0.2 to 0.2HSteelRockwell C61DIN 17296977A362000000000000000
     
    10.1 mm ID
    18810.10.3976"2240.016 to 0.0340.012 to 0.023-0.2 to 0.2HSteelRockwell C61DIN 17296977A36300000000000000
    181610.10.3976"2240.016 to 0.0340.012 to 0.023-0.2 to 0.2HSteelRockwell C61DIN 17296977A364000000000000000
    182110.10.3976"2240.016 to 0.0340.012 to 0.023-0.2 to 0.2HSteelRockwell C61DIN 17296977A365000000000000000
     
    10.2 mm ID
    18810.20.4016"2240.016 to 0.0340.012 to 0.023-0.2 to 0.2HSteelRockwell C61DIN 17296977A36600000000000000
    181610.20.4016"2240.016 to 0.0340.012 to 0.023-0.2 to 0.2HSteelRockwell C61DIN 17296977A367000000000000000
    182110.20.4016"2240.016 to 0.0340.012 to 0.023-0.2 to 0.2HSteelRockwell C61DIN 17296977A368000000000000000
     
    10.3 mm ID
    18810.30.4055"2240.016 to 0.0340.012 to 0.023-0.2 to 0.2HSteelRockwell C61DIN 17296977A36900000000000000
     
    10.4 mm ID
    18810.40.4094"2240.016 to 0.0340.012 to 0.023-0.2 to 0.2HSteelRockwell C61DIN 17296977A37200000000000000
     
    10.5 mm ID
    18810.50.4134"2240.016 to 0.0340.012 to 0.023-0.2 to 0.2HSteelRockwell C61DIN 17296977A37500000000000000
    181610.50.4134"2240.016 to 0.0340.012 to 0.023-0.2 to 0.2HSteelRockwell C61DIN 17296977A376000000000000000
    182110.50.4134"2240.016 to 0.0340.012 to 0.023-0.2 to 0.2HSteelRockwell C61DIN 17296977A377000000000000000
     
    10.6 mm ID
    18810.60.4173"2240.016 to 0.0340.012 to 0.023-0.2 to 0.2HSteelRockwell C61DIN 17296977A37800000000000000
     
    10.7 mm ID
    182110.70.4213"2240.016 to 0.0340.012 to 0.023-0.2 to 0.2HSteelRockwell C61DIN 17296977A383000000000000000
     
    10.8 mm ID
    18810.80.4252"2240.016 to 0.0340.012 to 0.023-0.2 to 0.2HSteelRockwell C61DIN 17296977A38400000000000000
    181610.80.4252"2240.016 to 0.0340.012 to 0.023-0.2 to 0.2HSteelRockwell C61DIN 17296977A385000000000000000
     
    10.9 mm ID
    18810.90.4291"2240.016 to 0.0340.012 to 0.023-0.2 to 0.2HSteelRockwell C61DIN 17296977A38700000000000000
     
    11 mm ID
    188110.4331"2240.016 to 0.0340.012 to 0.023-0.2 to 0.2HSteelRockwell C61DIN 17296977A39000000000000000
    1816110.4331"2240.016 to 0.0340.012 to 0.023-0.2 to 0.2HSteelRockwell C61DIN 17296977A391000000000000000
    1821110.4331"2240.016 to 0.0340.012 to 0.023-0.2 to 0.2HSteelRockwell C61DIN 17296977A392000000000000000
     
    11.1 mm ID
    181611.10.437"2240.016 to 0.0340.012 to 0.023-0.2 to 0.2HSteelRockwell C61DIN 17296977A394000000000000000
     
    11.2 mm ID
    181611.20.4409"2240.016 to 0.0340.012 to 0.023-0.2 to 0.2HSteelRockwell C61DIN 17296977A397000000000000000
     
    11.3 mm ID
    18811.30.4449"2240.016 to 0.0340.012 to 0.023-0.2 to 0.2HSteelRockwell C61DIN 17296977A39900000000000000
     
    11.4 mm ID
    18811.40.4488"2240.016 to 0.0340.012 to 0.023-0.2 to 0.2HSteelRockwell C61DIN 17296977A40200000000000000
     
    11.5 mm ID
    18811.50.4528"2240.016 to 0.0340.012 to 0.023-0.2 to 0.2HSteelRockwell C61DIN 17296977A40500000000000000
    181611.50.4528"2240.016 to 0.0340.012 to 0.023-0.2 to 0.2HSteelRockwell C61DIN 17296977A406000000000000000
     
    11.6 mm ID
    18811.60.4567"2240.016 to 0.0340.012 to 0.023-0.2 to 0.2HSteelRockwell C61DIN 17296977A40800000000000000
     
    11.7 mm ID
    18811.70.4606"2240.016 to 0.0340.012 to 0.023-0.2 to 0.2HSteelRockwell C61DIN 17296977A41100000000000000
     
    11.8 mm ID
    181611.80.4646"2240.016 to 0.0340.012 to 0.023-0.2 to 0.2HSteelRockwell C61DIN 17296977A415000000000000000
     
    11.9 mm ID
    18811.90.4685"2240.016 to 0.0340.012 to 0.023-0.2 to 0.2HSteelRockwell C61DIN 17296977A41700000000000000
     
    12 mm ID
    188120.4724"2240.016 to 0.0340.012 to 0.023-0.2 to 0.2HSteelRockwell C61DIN 17296977A42000000000000000
    1816120.4724"2240.016 to 0.0340.012 to 0.023-0.2 to 0.2HSteelRockwell C61DIN 17296977A421000000000000000
    1821120.4724"2240.016 to 0.0340.012 to 0.023-0.2 to 0.2HSteelRockwell C61DIN 17296977A422000000000000000
     
    12.1 mm ID
    221212.10.4764"2640.016 to 0.0340.015 to 0.028-0.2 to 0.2HSteelRockwell C61DIN 17296977A423000000000000000
    222412.10.4764"2640.016 to 0.0340.015 to 0.028-0.2 to 0.2HSteelRockwell C61DIN 17296977A424000000000000000
    223212.10.4764"2640.016 to 0.0340.015 to 0.028-0.3 to 0.3HSteelRockwell C61DIN 17296977A425000000000000000
     
    12.2 mm ID
    221212.20.4803"2640.016 to 0.0340.015 to 0.028-0.2 to 0.2HSteelRockwell C61DIN 17296977A426000000000000000
    222412.20.4803"2640.016 to 0.0340.015 to 0.028-0.2 to 0.2HSteelRockwell C61DIN 17296977A427000000000000000
     
    12.3 mm ID
    221212.30.4843"2640.016 to 0.0340.015 to 0.028-0.2 to 0.2HSteelRockwell C61DIN 17296977A429000000000000000
     
    12.4 mm ID
    221212.40.4882"2640.016 to 0.0340.015 to 0.028-0.2 to 0.2HSteelRockwell C61DIN 17296977A432000000000000000
     
    12.5 mm ID
    221212.50.4921"2640.016 to 0.0340.015 to 0.028-0.2 to 0.2HSteelRockwell C61DIN 17296977A435000000000000000
    222412.50.4921"2640.016 to 0.0340.015 to 0.028-0.2 to 0.2HSteelRockwell C61DIN 17296977A436000000000000000
     
    12.6 mm ID
    221212.60.4961"2640.016 to 0.0340.015 to 0.028-0.2 to 0.2HSteelRockwell C61DIN 17296977A438000000000000000
     
    12.7 mm ID
    221212.70.5"2640.016 to 0.0340.015 to 0.028-0.2 to 0.2HSteelRockwell C61DIN 17296977A441000000000000000
    222412.70.5"2640.016 to 0.0340.015 to 0.028-0.2 to 0.2HSteelRockwell C61DIN 17296977A442000000000000000
     
    12.8 mm ID
    221212.80.5039"2640.016 to 0.0340.015 to 0.028-0.2 to 0.2HSteelRockwell C61DIN 17296977A444000000000000000
     
    12.9 mm ID
    222412.90.5079"2640.016 to 0.0340.015 to 0.028-0.2 to 0.2HSteelRockwell C61DIN 17296977A448000000000000000
     
    13 mm ID
    2212130.5118"2640.016 to 0.0340.015 to 0.028-0.2 to 0.2HSteelRockwell C61DIN 17296977A450000000000000000
    2224130.5118"2640.016 to 0.0340.015 to 0.028-0.2 to 0.2HSteelRockwell C61DIN 17296977A451000000000000000
    2232130.5118"2640.016 to 0.0340.015 to 0.028-0.3 to 0.3HSteelRockwell C61DIN 17296977A452000000000000000
     
    13.1 mm ID
    221213.10.5157"2640.016 to 0.0340.015 to 0.028-0.2 to 0.2HSteelRockwell C61DIN 17296977A453000000000000000
     
    13.5 mm ID
    221213.50.5315"2640.016 to 0.0340.015 to 0.028-0.2 to 0.2HSteelRockwell C61DIN 17296977A465000000000000000
    222413.50.5315"2640.016 to 0.0340.015 to 0.028-0.2 to 0.2HSteelRockwell C61DIN 17296977A466000000000000000
     
    13.9 mm ID
    221213.90.5472"2640.016 to 0.0340.015 to 0.028-0.2 to 0.2HSteelRockwell C61DIN 17296977A477000000000000000
     
    14 mm ID
    2212140.5512"2640.016 to 0.0340.015 to 0.028-0.2 to 0.2HSteelRockwell C61DIN 17296977A480000000000000000
    2224140.5512"2640.016 to 0.0340.015 to 0.028-0.2 to 0.2HSteelRockwell C61DIN 17296977A481000000000000000
    2232140.5512"2640.016 to 0.0340.015 to 0.028-0.3 to 0.3HSteelRockwell C61DIN 17296977A482000000000000000
     
    14.1 mm ID
    222414.10.5551"2640.016 to 0.0340.015 to 0.028-0.2 to 0.2HSteelRockwell C61DIN 17296977A484000000000000000
     
    14.3 mm ID
    221214.30.563"2640.016 to 0.0340.015 to 0.028-0.2 to 0.2HSteelRockwell C61DIN 17296977A489000000000000000
     
    14.5 mm ID
    221214.50.5709"2640.016 to 0.0340.015 to 0.028-0.2 to 0.2HSteelRockwell C61DIN 17296977A495000000000000000
     
    15 mm ID
    2212150.5906"2640.016 to 0.0340.015 to 0.028-0.2 to 0.2HSteelRockwell C61DIN 17296977A510000000000000000
    2224150.5906"2640.016 to 0.0340.015 to 0.028-0.2 to 0.2HSteelRockwell C61DIN 17296977A511000000000000000
    2232150.5906"2640.016 to 0.0340.015 to 0.028-0.3 to 0.3HSteelRockwell C61DIN 17296977A512000000000000000
     
    15.5 mm ID
    261215.50.6102"3040.016 to 0.0340.015 to 0.028-0.2 to 0.2HSteelRockwell C61DIN 17296977A513000000000000000
    262415.50.6102"3040.016 to 0.0340.015 to 0.028-0.2 to 0.2HSteelRockwell C61DIN 17296977A514000000000000000
     
    16 mm ID
    2612160.6299"3040.016 to 0.0340.015 to 0.028-0.2 to 0.2HSteelRockwell C61DIN 17296977A516000000000000000
    2624160.6299"3040.016 to 0.0340.015 to 0.028-0.2 to 0.2HSteelRockwell C61DIN 17296977A517000000000000000
    2632160.6299"3040.016 to 0.0340.015 to 0.028-0.3 to 0.3HSteelRockwell C61DIN 17296977A518000000000000000
     
    16.5 mm ID
    261216.50.6496"3040.016 to 0.0340.015 to 0.028-0.2 to 0.2HSteelRockwell C61DIN 17296977A519000000000000000
    262416.50.6496"3040.016 to 0.0340.015 to 0.028-0.2 to 0.2HSteelRockwell C61DIN 17296977A520000000000000000
     
    17 mm ID
    2612170.6693"3040.016 to 0.0340.015 to 0.028-0.2 to 0.2HSteelRockwell C61DIN 17296977A522000000000000000
    2624170.6693"3040.016 to 0.0340.015 to 0.028-0.2 to 0.2HSteelRockwell C61DIN 17296977A523000000000000000
    2632170.6693"3040.016 to 0.0340.015 to 0.028-0.3 to 0.3HSteelRockwell C61DIN 17296977A524000000000000000
     
    17.5 mm ID
    261217.50.689"3040.016 to 0.0340.015 to 0.028-0.2 to 0.2HSteelRockwell C61DIN 17296977A525000000000000000
     
    18 mm ID
    2612180.7087"3040.016 to 0.0340.015 to 0.028-0.2 to 0.2HSteelRockwell C61DIN 17296977A528000000000000000
    2624180.7087"3040.016 to 0.0340.015 to 0.028-0.2 to 0.2HSteelRockwell C61DIN 17296977A529000000000000000
    2632180.7087"3040.016 to 0.0340.015 to 0.028-0.3 to 0.3HSteelRockwell C61DIN 17296977A530000000000000000
     
    18.5 mm ID
    301518.50.7283"3450.02 to 0.0410.015 to 0.028-0.2 to 0.2HSteelRockwell C61DIN 17296977A531000000000000000
    303118.50.7283"3450.02 to 0.0410.015 to 0.028-0.3 to 0.3HSteelRockwell C61DIN 17296977A532000000000000000
     
    19 mm ID
    3015190.748"3450.02 to 0.0410.015 to 0.028-0.2 to 0.2HSteelRockwell C61DIN 17296977A534000000000000000
    3031190.748"3450.02 to 0.0410.015 to 0.028-0.3 to 0.3HSteelRockwell C61DIN 17296977A535000000000000000
    3040190.748"3450.02 to 0.0410.015 to 0.028-0.3 to 0.3HSteelRockwell C61DIN 17296977A536000000000000000
     
    19.5 mm ID
    301519.50.7677"3450.02 to 0.0410.015 to 0.028-0.2 to 0.2HSteelRockwell C61DIN 17296977A537000000000000000
     
    20 mm ID
    301520
    		0.7874"3450.02 to 0.0410.015 to 0.028-0.2 to 0.2HSteelRockwell C61DIN 17296977A540000000000000000
    303120
    		0.7874"3450.02 to 0.0410.015 to 0.028-0.3 to 0.3HSteelRockwell C61DIN 17296977A541000000000000000
    304020
    		0.7874"3450.02 to 0.0410.015 to 0.028-0.3 to 0.3HSteelRockwell C61DIN 17296977A542000000000000000
     
    20.5 mm ID
    301520.50.8071"3450.02 to 0.0410.015 to 0.028-0.2 to 0.2HSteelRockwell C61DIN 17296977A543000000000000000
    303120.50.8071"3450.02 to 0.0410.015 to 0.028-0.3 to 0.3HSteelRockwell C61DIN 17296977A544000000000000000
     
    21 mm ID
    3015210.8268"3450.02 to 0.0410.015 to 0.028-0.2 to 0.2HSteelRockwell C61DIN 17296977A546000000000000000
    3031210.8268"3450.02 to 0.0410.015 to 0.028-0.3 to 0.3HSteelRockwell C61DIN 17296977A547000000000000000
     
    22 mm ID
    3015220.8661"3450.02 to 0.0410.015 to 0.028-0.2 to 0.2HSteelRockwell C61DIN 17296977A552000000000000000
    3031220.8661"3450.02 to 0.0410.015 to 0.028-0.3 to 0.3HSteelRockwell C61DIN 17296977A553000000000000000
    3040220.8661"3450.02 to 0.0410.015 to 0.028-0.3 to 0.3HSteelRockwell C61DIN 17296977A554000000000000000
     
    23 mm ID
    3531230.9055"3950.02 to 0.0410.017 to 0.033-0.3 to 0.3HSteelRockwell C61DIN 17296977A559000000000000000
     
    24 mm ID
    3515240.9449"3950.02 to 0.0410.017 to 0.033-0.2 to 0.2HSteelRockwell C61DIN 17296977A564000000000000000
    3531240.9449"3950.02 to 0.0410.017 to 0.033-0.3 to 0.3HSteelRockwell C61DIN 17296977A565000000000000000
     
    25 mm ID
    3515250.9843"3950.02 to 0.0410.017 to 0.033-0.2 to 0.2HSteelRockwell C61DIN 17296977A570000000000000000
    3531250.9843"3950.02 to 0.0410.017 to 0.033-0.3 to 0.3HSteelRockwell C61DIN 17296977A571000000000000000
    3540250.9843"3950.02 to 0.0410.017 to 0.033-0.3 to 0.3HSteelRockwell C61DIN 17296977A572000000000000000
     
    25.5 mm ID
    351525.51.0039"3950.02 to 0.0410.017 to 0.033-0.2 to 0.2HSteelRockwell C61DIN 17296977A573000000000000000
    353125.51.0039"3950.02 to 0.0410.017 to 0.033-0.3 to 0.3HSteelRockwell C61DIN 17296977A574000000000000000
     
    26 mm ID
    3515261.0236"3950.02 to 0.0410.017 to 0.033-0.2 to 0.2HSteelRockwell C61DIN 17296977A576000000000000000
    3531261.0236"3950.02 to 0.0410.017 to 0.033-0.3 to 0.3HSteelRockwell C61DIN 17296977A577000000000000000
     
    27 mm ID
    4220271.063"4650.02 to 0.0410.017 to 0.033-0.2 to 0.2HSteelRockwell C61DIN 17296977A582000000000000000
     
    28 mm ID
    4220281.1024"4650.02 to 0.0410.017 to 0.033-0.2 to 0.2HSteelRockwell C61DIN 17296977A588000000000000000
     
    29 mm ID
    4220291.1417"4650.02 to 0.0410.017 to 0.033-0.2 to 0.2HSteelRockwell C61DIN 17296977A594000000000000000
     
    30 mm ID
    422030
    		1.1811"4650.02 to 0.0410.017 to 0.033-0.2 to 0.2HSteelRockwell C61DIN 17296977A600000000000000000
    424030
    		1.1811"4650.02 to 0.0410.017 to 0.033-0.3 to 0.3HSteelRockwell C61DIN 17296977A601000000000000000
     
    32 mm ID
    4820321.2598"5250.025 to 0.050.017 to 0.033-0.2 to 0.2HSteelRockwell C61DIN 17296977A612000000000000000
     
    35 mm ID
    4820351.378"5250.025 to 0.050.017 to 0.033-0.2 to 0.2HSteelRockwell C61DIN 17296977A630000000000000000
    4840351.378"5250.025 to 0.050.017 to 0.033-0.3 to 0.3HSteelRockwell C61DIN 17296977A631000000000000000
     
    40 mm ID
    5525401.5748"5950.025 to 0.050.02 to 0.039-0.2 to 0.2HSteelRockwell C61DIN 17296977A660000000000000000
     

    Metric Press-Fit Drill Bushings

    Image of ProductInUse. Front orientation. Contains Annotated. Drill Bushings. Metric Press-Fit Drill Bushings.
    Image of Product. Front orientation. Drill Bushings. Metric Press-Fit Drill Bushings.
    Also known as jig bushings, these metric drill bushings fit inside fixture plate holes to precisely guide drill bits, counterbores, reamers, and other cutting tools. They improve accuracy so that your drilled holes and cuts are consistent from part to part. Known for their versatility, drill bushings are also used as spacers, shims, and machinery bushings. These bushings are made of hardened, ground steel that holds its shape and resists wear, so they last for many cycles without needing to be replaced.
    All bushings have a chamfer on the outside that centers the bushing as you place it into the hole. Press into place with a manual or hydraulic press. Since the bushing is sized slightly larger than the hole for an extremely tight fit, it’ll stay put permanently. These are ANSI Type PM bushings—also known as headless bushings—which means you don’t need to counterbore the hole to mount them flush.
    They also have an internal chamfer that makes it easy to insert bits, pins, and punches without damaging the bushing or misaligning tools.
    Don't see the size you need? Additional sizes are available.
    DIN 179—DIN 179 bushings meet dimensional and material standards that make sure they're compatible with other parts and tools. Although DIN 179 is no longer an active standard, it's still a common reference point for designers.
    Tolerance,
    mm
    OD,
    mm
    Lg.,
    mm
    Internal
    Chamfer
    For Drill
    Bit Size, mm
    For Drill Bit Size
    Decimal Equiv.
    ID
    OD
    Lg.
    Drill Bushing
    Type
    Material
    Hardness
    Specs.
    Met
    Each
    1 mm ID
    36One End10.0394"0.006 to 0.0160.004 to 0.01-0.1 to 0.1PMSteelRockwell C61DIN 17996990A118000000
    39One End10.0394"0.006 to 0.0160.004 to 0.01-0.2 to 0.2PMSteelRockwell C61DIN 17996990A11900000
     
    1.1 mm ID
    46One End1.10.0433"0.006 to 0.0160.008 to 0.016-0.1 to 0.1PMSteelRockwell C61DIN 17996990A12100000
     
    1.2 mm ID
    46One End1.20.0472"0.006 to 0.0160.008 to 0.016-0.1 to 0.1PMSteelRockwell C61DIN 17996990A12300000
    49One End1.20.0472"0.006 to 0.0160.008 to 0.016-0.2 to 0.2PMSteelRockwell C61DIN 17996990A12400000
     
    1.5 mm ID
    46One End1.50.0591"0.006 to 0.0160.008 to 0.016-0.1 to 0.1PMSteelRockwell C61DIN 17996990A12900000
    49One End1.50.0591"0.006 to 0.0160.008 to 0.016-0.2 to 0.2PMSteelRockwell C61DIN 17996990A13100000
     
    1.6 mm ID
    46One End1.60.063"0.006 to 0.0160.008 to 0.016-0.1 to 0.1PMSteelRockwell C61DIN 17996990A13200000
    49One End1.60.063"0.006 to 0.0160.008 to 0.016-0.2 to 0.2PMSteelRockwell C61DIN 1798486A1300000
     
    1.8 mm ID
    46One End1.80.0709"0.006 to 0.0160.008 to 0.016-0.1 to 0.1PMSteelRockwell C61DIN 17996990A13500000
     
    1.9 mm ID
    56One End1.90.0748"0.006 to 0.0160.008 to 0.016-0.1 to 0.1PMSteelRockwell C61DIN 17996990A1370000
     
    2 mm ID
    56One End20.0787"0.006 to 0.0160.008 to 0.016-0.1 to 0.1PMSteelRockwell C61DIN 17996990A1390000
    59One End20.0787"0.006 to 0.0160.008 to 0.016-0.2 to 0.2PMSteelRockwell C61DIN 1798486A180000
     
    2.1 mm ID
    56One End2.10.0827"0.006 to 0.0160.008 to 0.016-0.1 to 0.1PMSteelRockwell C61DIN 17996990A1410000
     
    2.3 mm ID
    56One End2.30.0906"0.006 to 0.0160.008 to 0.016-0.25 to 0.25PMSteelRockwell C61DIN 1798486A51200000
     
    2.4 mm ID
    59One End2.40.0945"0.006 to 0.0160.008 to 0.016-0.2 to 0.2PMSteelRockwell C61DIN 1798486A2210000
     
    2.5 mm ID
    56One End2.50.0984"0.006 to 0.0160.008 to 0.016-0.1 to 0.1PMSteelRockwell C61DIN 17996990A1470000
    59One End2.50.0984"0.006 to 0.0160.008 to 0.016-0.2 to 0.2PMSteelRockwell C61DIN 17996990A1480000
    1020One End2.50.0984"0.006 to 0.0160.01 to 0.019-0.2 to 0.2PMSteelRockwell C61DIN 17996990A14000000
     
    2.6 mm ID
    56One End2.60.1024"0.006 to 0.0160.008 to 0.016-0.1 to 0.1PMSteelRockwell C61DIN 17996990A1490000
     
    2.8 mm ID
    616One End2.80.1102"0.006 to 0.0160.008 to 0.016-0.2 to 0.2PMSteelRockwell C61DIN 17996990A15700000
     
    2.9 mm ID
    612One End2.90.1142"0.006 to 0.0160.008 to 0.016-0.2 to 0.2PMSteelRockwell C61DIN 1798486A2410000
     
    3 mm ID
    68One End30.1181"0.01 to 0.0220.01 to 0.019-0.25 to 0.25PMSteelRockwell C61DIN 1798486A51600000
    612One End30.1181"0.006 to 0.0160.008 to 0.016-0.2 to 0.2PMSteelRockwell C61DIN 1798486A250000
    616One End30.1181"0.006 to 0.0160.008 to 0.016-0.2 to 0.2PMSteelRockwell C61DIN 17996990A16100000
    1020One End30.1181"0.006 to 0.0160.01 to 0.019-0.2 to 0.2PMSteelRockwell C61DIN 17996990A18000000
     
    3.1 mm ID
    68One End3.10.122"0.01 to 0.0220.008 to 0.016-0.2 to 0.2PMSteelRockwell C61DIN 17996990A1620000
    612One End3.10.122"0.01 to 0.0220.01 to 0.019-0.25 to 0.25PMSteelRockwell C61DIN 1798486A52300000
     
    3.2 mm ID
    68One End3.20.126"0.01 to 0.0220.008 to 0.016-0.2 to 0.2PMSteelRockwell C61DIN 17996990A1640000
    612One End3.20.126"0.01 to 0.0220.008 to 0.016-0.2 to 0.2PMSteelRockwell C61DIN 1798486A2610000
    616One End3.20.126"0.01 to 0.0220.008 to 0.016-0.2 to 0.2PMSteelRockwell C61DIN 17996990A16500000
     
    3.25 mm ID
    68One End3.250.128"0.01 to 0.0220.008 to 0.016-0.25 to 0.25PMSteelRockwell C61DIN 1798486A51800000
     
    3.3 mm ID
    68One End3.30.1299"0.01 to 0.0220.008 to 0.016-0.2 to 0.2PMSteelRockwell C61DIN 17996990A1660000
    612One End3.30.1299"0.01 to 0.0220.008 to 0.016-0.2 to 0.2PMSteelRockwell C61DIN 1798486A2710000
    616One End3.30.1299"0.01 to 0.0220.008 to 0.016-0.2 to 0.2PMSteelRockwell C61DIN 17996990A16700000
     
    3.4 mm ID
    78One End3.40.1339"0.01 to 0.0220.01 to 0.019-0.2 to 0.2PMSteelRockwell C61DIN 17996990A1680000
    712One End3.40.1339"0.01 to 0.0220.01 to 0.019-0.2 to 0.2PMSteelRockwell C61DIN 17996990A1690000
     
    3.5 mm ID
    78One End3.50.1378"0.01 to 0.0220.01 to 0.019-0.2 to 0.2PMSteelRockwell C61DIN 17996990A1720000
    712One End3.50.1378"0.01 to 0.0220.01 to 0.019-0.2 to 0.2PMSteelRockwell C61DIN 1798486A2810000
    716One End3.50.1378"0.01 to 0.0220.01 to 0.019-0.2 to 0.2PMSteelRockwell C61DIN 17996990A17300000
     
    3.6 mm ID
    712One End3.60.1417"0.01 to 0.0220.01 to 0.019-0.25 to 0.25PMSteelRockwell C61DIN 1798486A42500000
    716One End3.60.1417"0.01 to 0.0220.01 to 0.019-0.2 to 0.2PMSteelRockwell C61DIN 17996990A17500000
     
    3.9 mm ID
    78One End3.90.1535"0.01 to 0.0220.01 to 0.019-0.2 to 0.2PMSteelRockwell C61DIN 17996990A1830000
    712One End3.90.1535"0.01 to 0.0220.01 to 0.019-0.25 to 0.25PMSteelRockwell C61DIN 1798486A5270000
     
    4 mm ID
    78One End40.1575"0.01 to 0.0220.01 to 0.019-0.25 to 0.25PMSteelRockwell C61DIN 1798486A42200000
    712One End40.1575"0.01 to 0.0220.01 to 0.019-0.2 to 0.2PMSteelRockwell C61DIN 1798486A310000
    716One End40.1575"0.01 to 0.0220.01 to 0.019-0.2 to 0.2PMSteelRockwell C61DIN 17996990A18500000
     
    4.1 mm ID
    88One End4.10.1614"0.01 to 0.0220.01 to 0.019-0.2 to 0.2PMSteelRockwell C61DIN 17996990A1860000
    812One End4.10.1614"0.01 to 0.0220.01 to 0.019-0.2 to 0.2PMSteelRockwell C61DIN 17996990A1870000
    816One End4.10.1614"0.01 to 0.0220.01 to 0.019-0.2 to 0.2PMSteelRockwell C61DIN 1798486A32100000
     
    4.2 mm ID
    88One End4.20.1654"0.01 to 0.0220.01 to 0.019-0.2 to 0.2PMSteelRockwell C61DIN 17996990A1880000
    812One End4.20.1654"0.01 to 0.0220.01 to 0.019-0.2 to 0.2PMSteelRockwell C61DIN 17996990A1890000
    816One End4.20.1654"0.01 to 0.0220.01 to 0.019-0.2 to 0.2PMSteelRockwell C61DIN 17996990A19100000
     
    4.24 mm ID
    812One End4.240.1669"0.01 to 0.0220.01 to 0.019-0.25 to 0.25PMSteelRockwell C61DIN 1798486A52900000
     
    4.5 mm ID
    88One End4.50.1772"0.01 to 0.0220.01 to 0.019-0.2 to 0.2PMSteelRockwell C61DIN 17996990A1980000
    812One End4.50.1772"0.01 to 0.0220.01 to 0.019-0.2 to 0.2PMSteelRockwell C61DIN 17996990A1990000
    816One End4.50.1772"0.01 to 0.0220.01 to 0.019-0.2 to 0.2PMSteelRockwell C61DIN 1798486A33100000
     
    4.6 mm ID
    816One End4.60.1811"0.01 to 0.0220.01 to 0.019-0.2 to 0.2PMSteelRockwell C61DIN 1798486A3400000
     
    4.75 mm ID
    812One End4.750.187"0.01 to 0.0220.01 to 0.019-0.25 to 0.25PMSteelRockwell C61DIN 1798486A53100000
     
    4.8 mm ID
    88One End4.80.189"0.01 to 0.0220.01 to 0.019-0.2 to 0.2PMSteelRockwell C61DIN 17996990A2060000
    812One End4.80.189"0.01 to 0.0220.01 to 0.019-0.2 to 0.2PMSteelRockwell C61DIN 17996990A2070000
     
    4.9 mm ID
    812One End4.90.1929"0.01 to 0.0220.01 to 0.019-0.2 to 0.2PMSteelRockwell C61DIN 17996990A2110000
     
    5 mm ID
    88One End50.1969"0.01 to 0.0220.01 to 0.019-0.2 to 0.2PMSteelRockwell C61DIN 1798486A830000
    812One End50.1969"0.01 to 0.0220.01 to 0.019-0.25 to 0.25PMSteelRockwell C61DIN 1798486A41100000
    816One End50.1969"0.01 to 0.0220.01 to 0.019-0.2 to 0.2PMSteelRockwell C61DIN 17996990A21300000
     
    5.1 mm ID
    1010One End5.10.2008"0.01 to 0.0220.01 to 0.019-0.25 to 0.25PMSteelRockwell C61DIN 1798486A52400000
    1016One End5.10.2008"0.01 to 0.0220.01 to 0.019-0.2 to 0.2PMSteelRockwell C61DIN 17996990A21400000
    1020One End5.10.2008"0.01 to 0.0220.01 to 0.019-0.2 to 0.2PMSteelRockwell C61DIN 17996990A21500000
     
    5.2 mm ID
    1010One End5.20.2047"0.01 to 0.0220.01 to 0.019-0.2 to 0.2PMSteelRockwell C61DIN 17996990A2160000
     
    5.25 mm ID
    1010One End5.250.2067"0.01 to 0.0220.01 to 0.019-0.25 to 0.25PMSteelRockwell C61DIN 1798486A52600000
    1016One End5.250.2067"0.01 to 0.0220.01 to 0.019-0.25 to 0.25PMSteelRockwell C61DIN 1798486A53300000
     
    5.4 mm ID
    1010One End5.40.2126"0.01 to 0.0220.01 to 0.019-0.2 to 0.2PMSteelRockwell C61DIN 17996990A2230000
     
    5.5 mm ID
    1010One End5.50.2165"0.01 to 0.0220.01 to 0.019-0.2 to 0.2PMSteelRockwell C61DIN 17996990A2260000
    1016One End5.50.2165"0.01 to 0.0220.01 to 0.019-0.2 to 0.2PMSteelRockwell C61DIN 1798486A3610000
    1020One End5.50.2165"0.01 to 0.0220.01 to 0.019-0.2 to 0.2PMSteelRockwell C61DIN 17996990A22700000
     
    5.6 mm ID
    1010One End5.60.2205"0.01 to 0.0220.01 to 0.019-0.25 to 0.25PMSteelRockwell C61DIN 1798486A52800000
     
    5.7 mm ID
    1010One End5.70.2244"0.01 to 0.0220.01 to 0.019-0.2 to 0.2PMSteelRockwell C61DIN 17996990A2310000
    1016One End5.70.2244"0.01 to 0.0220.01 to 0.019-0.25 to 0.25PMSteelRockwell C61DIN 1798486A53500000
     
    5.8 mm ID
    1010One End5.80.2283"0.01 to 0.0220.01 to 0.019-0.2 to 0.2PMSteelRockwell C61DIN 17996990A2330000
     
    5.9 mm ID
    1016One End5.90.2323"0.01 to 0.0220.01 to 0.019-0.2 to 0.2PMSteelRockwell C61DIN 17996990A23700000
     
    6 mm ID
    812One End60.2362"0.01 to 0.0220.01 to 0.019-0.25 to 0.25PMSteelRockwell C61DIN 1798486A41300000
    106One End60.2362"0.01 to 0.0220.01 to 0.019-0.25 to 0.25PMSteelRockwell C61DIN 1798486A41500000
    1010One End60.2362"0.01 to 0.0220.01 to 0.019-0.25 to 0.25PMSteelRockwell C61DIN 1798486A41700000
    1016One End60.2362"0.01 to 0.0220.01 to 0.019-0.2 to 0.2PMSteelRockwell C61DIN 1798486A370000
    1020One End60.2362"0.01 to 0.0220.01 to 0.019-0.25 to 0.25PMSteelRockwell C61DIN 1798486A43200000
     
    6.05 mm ID
    1012One End6.050.2382"0.013 to 0.0280.01 to 0.019-0.2 to 0.2PMSteelRockwell C61DIN 17996990A21000000
     
    6.1 mm ID
    1210One End6.10.2402"0.013 to 0.0280.012 to 0.023-0.25 to 0.25PMSteelRockwell C61DIN 1798486A53400000
    1216One End6.10.2402"0.013 to 0.0280.012 to 0.023-0.2 to 0.2PMSteelRockwell C61DIN 17996990A23900000
    1220One End6.10.2402"0.013 to 0.0280.012 to 0.023-0.2 to 0.2PMSteelRockwell C61DIN 17996990A24100000
     
    6.2 mm ID
    1216One End6.20.2441"0.013 to 0.0280.012 to 0.023-0.2 to 0.2PMSteelRockwell C61DIN 17996990A24300000
     
    6.25 mm ID
    1210One End6.250.2461"0.013 to 0.0280.012 to 0.023-0.25 to 0.25PMSteelRockwell C61DIN 1798486A53600000
    1216One End6.250.2461"0.013 to 0.0280.012 to 0.023-0.25 to 0.25PMSteelRockwell C61DIN 1798486A4370000
     
    6.3 mm ID
    1210One End6.30.248"0.013 to 0.0280.012 to 0.023-0.2 to 0.2PMSteelRockwell C61DIN 17996990A24500000
     
    6.4 mm ID
    1210One End6.40.252"0.013 to 0.0280.012 to 0.023-0.2 to 0.2PMSteelRockwell C61DIN 17996990A24800000
    1216One End6.40.252"0.013 to 0.0280.012 to 0.023-0.25 to 0.25PMSteelRockwell C61DIN 1798486A5390000
    1220One End6.40.252"0.013 to 0.0280.012 to 0.023-0.2 to 0.2PMSteelRockwell C61DIN 17996990A24900000
     
    6.5 mm ID
    1210One End6.50.2559"0.013 to 0.0280.012 to 0.023-0.2 to 0.2PMSteelRockwell C61DIN 17996990A25100000
    1216One End6.50.2559"0.013 to 0.0280.012 to 0.023-0.2 to 0.2PMSteelRockwell C61DIN 1798486A380000
    1220One End6.50.2559"0.013 to 0.0280.012 to 0.023-0.2 to 0.2PMSteelRockwell C61DIN 17996990A25200000
     
    6.6 mm ID
    1210One End6.60.2598"0.013 to 0.0280.012 to 0.023-0.25 to 0.25PMSteelRockwell C61DIN 1798486A53800000
    1220One End6.60.2598"0.013 to 0.0280.012 to 0.023-0.2 to 0.2PMSteelRockwell C61DIN 17996990A25400000
     
    6.7 mm ID
    1216One End6.70.2638"0.013 to 0.0280.012 to 0.023-0.25 to 0.25PMSteelRockwell C61DIN 1798486A54100000
    1220One End6.70.2638"0.013 to 0.0280.012 to 0.023-0.2 to 0.2PMSteelRockwell C61DIN 17996990A25600000
     
    6.8 mm ID
    1210One End6.80.2677 mm0.013 to 0.0280.012 to 0.023-0.25 to 0.25PMSteelRockwell C61DIN 1798486A54400000
    1216One End6.80.2677"0.013 to 0.0280.012 to 0.023-0.2 to 0.2PMSteelRockwell C61DIN 17996990A25700000
    1220One End6.80.2677"0.013 to 0.0280.012 to 0.023-0.2 to 0.2PMSteelRockwell C61DIN 17996990A25800000
     
    6.9 mm ID
    1210One End6.90.2717"0.013 to 0.0280.012 to 0.023-0.2 to 0.2PMSteelRockwell C61DIN 17996990A25900000
    1220One End6.90.2717"0.013 to 0.0280.012 to 0.023-0.2 to 0.2PMSteelRockwell C61DIN 17996990A26200000
     
    7 mm ID
    1210One End70.2756"0.013 to 0.0280.012 to 0.023-0.2 to 0.2PMSteelRockwell C61DIN 17996990A26300000
    1216One End70.2756"0.013 to 0.0280.012 to 0.023-0.2 to 0.2PMSteelRockwell C61DIN 1798486A3910000
    1220One End70.2756"0.013 to 0.0280.012 to 0.023-0.2 to 0.2PMSteelRockwell C61DIN 17996990A80800000
     
    7.1 mm ID
    1220One End7.10.2795"0.013 to 0.0280.012 to 0.023-0.2 to 0.2PMSteelRockwell C61DIN 17996990A26700000
     
    7.2 mm ID
    1220One End7.20.2835"0.013 to 0.0280.012 to 0.023-0.2 to 0.2PMSteelRockwell C61DIN 17996990A27100000
     
    7.3 mm ID
    1210One End7.30.2874"0.013 to 0.0280.012 to 0.023-0.2 to 0.2PMSteelRockwell C61DIN 17996990A27200000
    1216One End7.30.2874"0.013 to 0.0280.012 to 0.023-0.2 to 0.2PMSteelRockwell C61DIN 1798486A4610000
     
    7.4 mm ID
    1210One End7.40.2913"0.013 to 0.0280.012 to 0.023-0.25 to 0.25PMSteelRockwell C61DIN 1798486A54200000
     
    7.5 mm ID
    1210One End7.50.2953"0.013 to 0.0280.012 to 0.023-0.2 to 0.2PMSteelRockwell C61DIN 17996990A27600000
    1216One End7.50.2953"0.013 to 0.0280.012 to 0.023-0.2 to 0.2PMSteelRockwell C61DIN 1798486A4620000
     
    7.6 mm ID
    1210One End7.60.2992"0.013 to 0.0280.012 to 0.023-0.25 to 0.25PMSteelRockwell C61DIN 1798486A44600000
     
    7.8 mm ID
    1216One End7.80.3071"0.013 to 0.0280.012 to 0.023-0.2 to 0.2PMSteelRockwell C61DIN 17996990A28400000
    1220One End7.80.3071"0.013 to 0.0280.012 to 0.023-0.2 to 0.2PMSteelRockwell C61DIN 17996990A28500000
     
    7.9 mm ID
    1210One End7.90.311"0.013 to 0.0280.012 to 0.023-0.2 to 0.2PMSteelRockwell C61DIN 17996990A28600000
    1220One End7.90.311"0.013 to 0.0280.012 to 0.023-0.2 to 0.2PMSteelRockwell C61DIN 17996990A28800000
     
    8 mm ID
    1210One End80.315"0.013 to 0.0280.012 to 0.023-0.25 to 0.25PMSteelRockwell C61DIN 1798486A44800000
    1216One End80.315"0.013 to 0.0280.012 to 0.023-0.2 to 0.2PMSteelRockwell C61DIN 1798486A430000
    1220One End80.315"0.013 to 0.0280.012 to 0.023-0.25 to 0.25PMSteelRockwell C61DIN 1798486A45100000
     
    8.1 mm ID
    1512One End8.10.3189"0.013 to 0.0280.012 to 0.023-0.25 to 0.25PMSteelRockwell C61DIN 1798486A55200000
    1512One End8.10.3189"0.013 to 0.0280.012 to 0.023-0.2 to 0.2PMSteelRockwell C61DIN 17996990A28900000
    1525One End8.10.3189"0.013 to 0.0280.012 to 0.023-0.2 to 0.2PMSteelRockwell C61DIN 17996990A29100000
     
    8.2 mm ID
    1512One End8.20.3228"0.013 to 0.0280.012 to 0.023-0.2 to 0.2PMSteelRockwell C61DIN 17996990A29200000
     
    8.25 mm ID
    1520One End8.250.3248"0.013 to 0.0280.012 to 0.023-0.25 to 0.25PMSteelRockwell C61DIN 1798486A54500000
     
    8.3 mm ID
    1512One End8.30.3268"0.013 to 0.0280.012 to 0.023-0.2 to 0.2PMSteelRockwell C61DIN 17996990A29500000
     
    8.4 mm ID
    1512One End8.40.3307 mm0.013 to 0.0280.012 to 0.023-0.25 to 0.25PMSteelRockwell C61DIN 1798486A55300000
     
    8.5 mm ID
    1512One End8.50.3346"0.013 to 0.0280.012 to 0.023-0.25 to 0.25PMSteelRockwell C61DIN 1798486A45400000
    1520One End8.50.3346"0.013 to 0.0280.012 to 0.023-0.2 to 0.2PMSteelRockwell C61DIN 1798486A46300000
    1525One End8.50.3346"0.013 to 0.0280.012 to 0.023-0.2 to 0.2PMSteelRockwell C61DIN 17996990A30100000
     
    8.75 mm ID
    1512One End8.750.3445"0.013 to 0.0280.012 to 0.023-0.25 to 0.25PMSteelRockwell C61DIN 1798486A45500000
     
    8.8 mm ID
    1512One End8.80.3465"0.013 to 0.0280.012 to 0.023-0.2 to 0.2PMSteelRockwell C61DIN 17996990A30800000
     
    9 mm ID
    1512One End90.3543"0.013 to 0.0280.012 to 0.023-0.2 to 0.2PMSteelRockwell C61DIN 17996990A31500000
    1520One End90.3543"0.013 to 0.0280.012 to 0.023-0.2 to 0.2PMSteelRockwell C61DIN 1798486A46400000
    1525One End90.3543"0.013 to 0.0280.012 to 0.023-0.2 to 0.2PMSteelRockwell C61DIN 17996990A31600000
     
    9.1 mm ID
    1512One End9.10.3583"0.013 to 0.0280.012 to 0.023-0.2 to 0.2PMSteelRockwell C61DIN 17996990A31700000
    1520One End9.10.3583"0.013 to 0.0280.012 to 0.023-0.2 to 0.2PMSteelRockwell C61DIN 17996990A31800000
     
    9.2 mm ID
    1520One End9.20.3622"0.013 to 0.0280.012 to 0.023-0.2 to 0.2PMSteelRockwell C61DIN 1798486A46500000
     
    9.5 mm ID
    1512One End9.50.374"0.013 to 0.0280.012 to 0.023-0.2 to 0.2PMSteelRockwell C61DIN 17996990A32800000
    1520One End9.50.374"0.013 to 0.0280.012 to 0.023-0.2 to 0.2PMSteelRockwell C61DIN 17996990A32900000
    1525One End9.50.374"0.013 to 0.0280.012 to 0.023-0.2 to 0.2PMSteelRockwell C61DIN 17996990A33100000
     
    9.6 mm ID
    1520One End9.60.378"0.013 to 0.0280.012 to 0.023-0.25 to 0.25PMSteelRockwell C61DIN 1798486A54900000
     
    9.7 mm ID
    1520One End9.70.3819"0.013 to 0.0280.012 to 0.023-0.2 to 0.2PMSteelRockwell C61DIN 17996990A33500000
     
    9.8 mm ID
    1512One End9.80.3858"0.013 to 0.0280.012 to 0.023-0.2 to 0.2PMSteelRockwell C61DIN 17996990A33700000
     
    9.9 mm ID
    1525One End9.90.3898"0.013 to 0.0280.012 to 0.023-0.2 to 0.2PMSteelRockwell C61DIN 17996990A34300000
     
    10 mm ID
    1512One End10
    		0.3937"0.013 to 0.0280.012 to 0.023-0.2 to 0.2PMSteelRockwell C61DIN 1798486A910000
    1513One End10
    		0.3937"0.013 to 0.0280.012 to 0.023-0.25 to 0.25PMSteelRockwell C61DIN 1798486A41900000
    1520One End10
    		0.3937"0.013 to 0.0280.012 to 0.023-0.2 to 0.2PMSteelRockwell C61DIN 1798486A4900000
    1525One End10
    		0.3937"0.013 to 0.0280.012 to 0.023-0.25 to 0.25PMSteelRockwell C61DIN 1798486A45700000
    187One End10
    		0.3937"0.013 to 0.0280.012 to 0.023-0.2 to 0.2PMSteelRockwell C61DIN 17996990A23000000
     
    10.1 mm ID
    1812One End10.10.3976"0.016 to 0.0340.012 to 0.023-0.2 to 0.2PMSteelRockwell C61DIN 17996990A34400000
    1820One End10.10.3976"0.016 to 0.0340.012 to 0.023-0.2 to 0.2PMSteelRockwell C61DIN 17996990A34500000
     
    10.2 mm ID
    1812One End10.20.4016"0.016 to 0.0340.012 to 0.023-0.2 to 0.2PMSteelRockwell C61DIN 17996990A34700000
     
    10.3 mm ID
    1812One End10.30.4055"0.016 to 0.0340.012 to 0.023-0.25 to 0.25PMSteelRockwell C61DIN 1798486A55800000
     
    10.4 mm ID
    1825One End10.40.4094"0.016 to 0.0340.012 to 0.023-0.2 to 0.2PMSteelRockwell C61DIN 17996990A35500000
     
    10.5 mm ID
    1812One End10.50.4134"0.016 to 0.0340.012 to 0.023-0.25 to 0.25PMSteelRockwell C61DIN 1798486A55900000
    1820One End10.50.4134"0.016 to 0.0340.012 to 0.023-0.2 to 0.2PMSteelRockwell C61DIN 1798486A51100000
    1825One End10.50.4134"0.016 to 0.0340.012 to 0.023-0.2 to 0.2PMSteelRockwell C61DIN 17996990A35600000
     
    10.8 mm ID
    1812One End10.80.4252"0.016 to 0.0340.012 to 0.023-0.2 to 0.2PMSteelRockwell C61DIN 17996990A36400000
     
    11 mm ID
    1812One End110.4331"0.016 to 0.0340.012 to 0.023-0.2 to 0.2PMSteelRockwell C61DIN 17996990A37100000
    1820One End110.4331"0.016 to 0.0340.012 to 0.023-0.2 to 0.2PMSteelRockwell C61DIN 17996990A37200000
    1825One End110.4331"0.016 to 0.0340.012 to 0.023-0.2 to 0.2PMSteelRockwell C61DIN 17996990A37300000
     
    11.2 mm ID
    1812One End11.20.4409"0.016 to 0.0340.012 to 0.023-0.2 to 0.2PMSteelRockwell C61DIN 17996990A37700000
     
    12 mm ID
    1610One End120.4724"0.016 to 0.0340.012 to 0.023-0.2 to 0.2PMSteelRockwell C61DIN 17996990A24000000
    1812One End120.4724"0.016 to 0.0340.012 to 0.023-0.2 to 0.2PMSteelRockwell C61DIN 1798486A9400000
    1820One End120.4724"0.016 to 0.0340.012 to 0.023-0.2 to 0.2PMSteelRockwell C61DIN 17996990A40300000
     
    12.05 mm ID
    186One End12.050.4744"0.016 to 0.0340.012 to 0.023-0.1 to 0.1PMSteelRockwell C61DIN 17996990A25000000
     
    12.1 mm ID
    2216One End12.10.4764"0.016 to 0.0340.015 to 0.028-0.2 to 0.2PMSteelRockwell C61DIN 17996990A40400000
     
    12.5 mm ID
    167One End12.50.4921"0.016 to 0.0340.012 to 0.023-0.2 to 0.2PMSteelRockwell C61DIN 17996990A27000000
    2216One End12.50.4921"0.016 to 0.0340.015 to 0.028-0.2 to 0.2PMSteelRockwell C61DIN 17996990A41700000
    2228One End12.50.4921"0.016 to 0.0340.015 to 0.028-0.2 to 0.2PMSteelRockwell C61DIN 1798486A55100000
     
    12.8 mm ID
    2216One End12.80.5039"0.016 to 0.0340.015 to 0.028-0.2 to 0.2PMSteelRockwell C61DIN 17996990A42600000
     
    13 mm ID
    2216One End130.5118"0.016 to 0.0340.015 to 0.028-0.2 to 0.2PMSteelRockwell C61DIN 17996990A43300000
    2228One End130.5118"0.016 to 0.0340.015 to 0.028-0.2 to 0.2PMSteelRockwell C61DIN 1798486A56100000
     
    13.5 mm ID
    2228One End13.50.5315"0.016 to 0.0340.015 to 0.028-0.2 to 0.2PMSteelRockwell C61DIN 1798486A58100000
     
    14 mm ID
    2216One End140.5512"0.016 to 0.0340.015 to 0.028-0.2 to 0.2PMSteelRockwell C61DIN 17996990A46300000
    2236One End140.5512"0.016 to 0.0340.015 to 0.028-0.3 to 0.3PMSteelRockwell C61DIN 17996990A46500000
     
    14.1 mm ID
    2228One End14.10.5551"0.016 to 0.0340.015 to 0.028-0.2 to 0.2PMSteelRockwell C61DIN 1798486A59100000
     
    14.2 mm ID
    2216One End14.20.5591"0.016 to 0.0340.015 to 0.028-0.2 to 0.2PMSteelRockwell C61DIN 17996990A46800000
     
    14.5 mm ID
    2228One End14.50.5709"0.016 to 0.0340.015 to 0.028-0.2 to 0.2PMSteelRockwell C61DIN 1798486A61100000
     
    15 mm ID
    2216One End150.5906"0.016 to 0.0340.015 to 0.028-0.2 to 0.2PMSteelRockwell C61DIN 17996990A49400000
    2228One End150.5906"0.016 to 0.0340.015 to 0.028-0.2 to 0.2PMSteelRockwell C61DIN 1798486A63100000
    2236One End150.5906"0.016 to 0.0340.015 to 0.028-0.3 to 0.3PMSteelRockwell C61DIN 17996990A49500000
     
    15.5 mm ID
    2628One End15.50.6102"0.016 to 0.0340.015 to 0.028-0.2 to 0.2PMSteelRockwell C61DIN 1798486A65100000
     
    16 mm ID
    269One End160.6299"0.016 to 0.0340.015 to 0.028-0.2 to 0.2PMSteelRockwell C61DIN 17996990A28000000
    2610One End160.6299"0.016 to 0.0340.015 to 0.028-0.2 to 0.2PMSteelRockwell C61DIN 17996990A29000000
    2616One End160.6299"0.016 to 0.0340.015 to 0.028-0.2 to 0.2PMSteelRockwell C61DIN 17996990A49800000
    2628One End160.6299"0.016 to 0.0340.015 to 0.028-0.2 to 0.2PMSteelRockwell C61DIN 1798486A66100000
    2636One End160.6299"0.016 to 0.0340.015 to 0.028-0.3 to 0.3PMSteelRockwell C61DIN 17996990A49900000
     
    16.25 mm ID
    3532One End16.250.6398"0.016 to 0.0340.017 to 0.033-0.3 to 0.3PMSteelRockwell B61DIN 17996990A31000000
     
    16.5 mm ID
    2628One End16.50.6496"0.016 to 0.0340.015 to 0.028-0.2 to 0.2PMSteelRockwell C61DIN 1798486A67100000
     
    17 mm ID
    2616One End170.6693"0.016 to 0.0340.015 to 0.028-0.2 to 0.2PMSteelRockwell C61DIN 17996990A50300000
    2628One End170.6693"0.016 to 0.0340.015 to 0.028-0.2 to 0.2PMSteelRockwell C61DIN 1798486A69100000
     
    17.5 mm ID
    2616One End17.50.689"0.016 to 0.0340.015 to 0.028-0.2 to 0.2PMSteelRockwell C61DIN 17996990A50500000
    2628One End17.50.689"0.016 to 0.0340.015 to 0.028-0.2 to 0.2PMSteelRockwell C61DIN 1798486A72100000
     
    18 mm ID
    2616One End180.7087"0.016 to 0.0340.015 to 0.028-0.2 to 0.2PMSteelRockwell C61DIN 17996990A50700000
    2628One End180.7087"0.016 to 0.0340.015 to 0.028-0.2 to 0.2PMSteelRockwell C61DIN 1798486A73100000
     
    18.5 mm ID
    3020One End18.50.7283"0.02 to 0.0410.015 to 0.028-0.2 to 0.2PMSteelRockwell C61DIN 17996990A50900000
     
    19 mm ID
    3020One End190.748"0.02 to 0.0410.015 to 0.028-0.2 to 0.2PMSteelRockwell C61DIN 17996990A51200000
     
    19.5 mm ID
    3020One End19.50.7677"0.02 to 0.0410.015 to 0.028-0.2 to 0.2PMSteelRockwell C61DIN 17996990A51500000
     
    20 mm ID
    2518One End20
    		0.7874"0.02 to 0.0410.015 to 0.028-0.2 to 0.2PMSteelRockwell C61DIN 17996990A32000000
    3020One End20
    		0.7874"0.02 to 0.0410.015 to 0.028-0.2 to 0.2PMSteelRockwell C61DIN 17996990A51800000
    3036One End20
    		0.7874"0.02 to 0.0410.015 to 0.028-0.3 to 0.3PMSteelRockwell C61DIN 1798486A7600000
    3045One End20
    		0.7874"0.02 to 0.0410.015 to 0.028-0.3 to 0.3PMSteelRockwell C61DIN 17996990A52100000
     
    20.5 mm ID
    3020One End20.50.8071"0.02 to 0.0410.015 to 0.028-0.2 to 0.2PMSteelRockwell C61DIN 17996990A52200000
     
    22 mm ID
    3020One End220.8661"0.02 to 0.0410.015 to 0.028-0.2 to 0.2PMSteelRockwell C61DIN 17996990A53200000
    3036One End220.8661"0.02 to 0.0410.015 to 0.028-0.3 to 0.3PMSteelRockwell C61DIN 1798486A78100000
     
    24 mm ID
    3520One End240.9449"0.02 to 0.0410.017 to 0.033-0.2 to 0.2PMSteelRockwell C61DIN 17996990A54400000
    3536One End240.9449"0.02 to 0.0410.017 to 0.033-0.3 to 0.3PMSteelRockwell C61DIN 1798486A7900000
     
    25 mm ID
    2825One End250.9843"0.02 to 0.0410.015 to 0.028-0.2 to 0.2PMSteelRockwell C61DIN 17996990A35000000
    3115One End250.9843"0.02 to 0.0410.017 to 0.033-0.2 to 0.2PMSteelRockwell C61DIN 17996990A36000000
    3150One End250.9843"0.02 to 0.0410.017 to 0.033-0.3 to 0.3PMSteelRockwell C61DIN 17996990A37000000
    3160One End250.9843"0.02 to 0.0410.017 to 0.033-0.3 to 0.3PMSteelRockwell C61DIN 17996990A38000000
    3520One End250.9843"0.02 to 0.0410.017 to 0.033-0.2 to 0.2PMSteelRockwell C61DIN 17996990A54900000
    3536One End250.9843"0.02 to 0.0410.017 to 0.033-0.3 to 0.3PMSteelRockwell C61DIN 1798486A9600000
    3545One End250.9843"0.02 to 0.0410.017 to 0.033-0.3 to 0.3PMSteelRockwell C61DIN 17996990A55100000
     
    26 mm ID
    3536One End261.0236"0.02 to 0.0410.017 to 0.033-0.3 to 0.3PMSteelRockwell C61DIN 17996990A55600000
     
    27 mm ID
    4245One End271.063"0.02 to 0.0410.017 to 0.033-0.3 to 0.3PMSteelRockwell C61DIN 1798486A8100000
     
    28 mm ID
    4225One End281.1024"0.02 to 0.0410.017 to 0.033-0.2 to 0.2PMSteelRockwell C61DIN 17996990A56700000
    4245One End281.1024"0.02 to 0.0410.017 to 0.033-0.3 to 0.3PMSteelRockwell C61DIN 17996990A56800000
     
    30 mm ID
    3630One End30
    		1.1811"0.02 to 0.0410.017 to 0.033-0.2 to 0.2PMSteelRockwell C61DIN 17996990A42000000
    3650One End30
    		1.1811"0.02 to 0.0410.017 to 0.033-0.3 to 0.3PMSteelRockwell C61DIN 17996990A43000000
    4225One End30
    		1.1811"0.02 to 0.0410.017 to 0.033-0.2 to 0.2PMSteelRockwell C61DIN 17996990A58100000
    4245One End30
    		1.1811"0.02 to 0.0410.017 to 0.033-0.3 to 0.3PMSteelRockwell C61DIN 1798486A82100000
     
    32 mm ID
    4825One End321.2598"0.025 to 0.050.017 to 0.033-0.2 to 0.2PMSteelRockwell C61DIN 17996990A59300000
     
    35 mm ID
    4020One End351.378"0.025 to 0.050.017 to 0.033-0.2 to 0.2PMSteelRockwell C61DIN 17996990A49000000
    5019One End351.378"0.025 to 0.050.017 to 0.033-0.2 to 0.2PMSteelRockwell C61DIN 17996990A48000000
     
    40 mm ID
    5019One End401.5748"0.025 to 0.050.017 to 0.033-0.2 to 0.2PMSteelRockwell C61DIN 17996990A51000000
    5530One End401.5748"0.025 to 0.050.02 to 0.039-0.2 to 0.2PMSteelRockwell C61DIN 17996990A64600000
    5556One End401.5748"0.025 to 0.050.02 to 0.039-0.3 to 0.3PMSteelRockwell C61DIN 17996990A64700000
     
    back to top