Quickly restore stripped threads—these inserts come with through-hole taps and installation tools. The tough coils on these inserts expand once installed to anchor in a tapped hole.

With Loctite® adhesive already on the threads, these inserts won’t back out or vibrate loose. The adhesive reaches full strength after 72 hours. Unlike helical inserts, you can install them with a standard drill and tap. However, thread-locking inserts are difficult to remove and reuse.

After drilling and tapping your hole, install inserts with a wrench or an installation bit. To use a wrench, thread an insert and two hex nuts onto a bolt. Then, grip and turn the top nut to drive into the hole. For slotted inserts, you can drive with a slotted screwdriver instead.

These assortments include various sizes of thread-locking inserts, which won’t back out or loosen from vibration. Also known as E-Z Lok, they come with Loctite® adhesive already applied, and the adhesive reaches full strength after 72 hours. After drilling and tapping your hole, install inserts with a wrench or use an installation bit (not included). To use a wrench, thread an insert and two hex nuts onto a bolt. Then, grip and turn the top nut to drive into the hole.

Add strong threads in soft metal, such as aluminum. The keys on these inserts drive into holes to hold more securely than thread-locking or helical inserts. They prevent slipping and rotating, so they’re stable enough for use in vehicle or aerospace parts that experience heavy vibration. These inserts are comparable to Keensert inserts.

To install, drill and tap a hole in your material. Then, thread the insert onto the installation tool and screw it into the hole. Place the tool over the keys and hit it with a hammer to drive them in.

Restore, reinforce, or create threads in metal. The tough coils on these inserts expand once installed to anchor in a tapped hole. Also known as Heli-Coil inserts, they're often used in engine heads and machinery housings where strong connections are critical. Unlike threadlocking inserts, you can remove and reuse them without them losing their strength.

Installation requires a drill bit, a helical insert tap, and an installation tool.

Paired with the right tool for installation, these inserts create strong threads in soft metal, such as aluminum. They have keys that drive into material to prevent inserts from slipping and rotating in the hole.

The irregularly shaped threads tightly grip screws to prevent them from loosening or backing out under vibration. Use these inserts to create or repair threads in pumps and other machinery that shakes and rattles. Also known as Heli-Coil inserts.

Installation requires a drill bit, a helical insert tap, and an installation tool.