Filter by
DFARS Compliance
Pipe Size
About Precision Flow-Adjustment Valves
More
About On/Off Valves
More
On/Off Valves with Push-to-Connect Fittings for Chemicals
90° Elbow Adapter, Push to Connect × Female NPT
90° Elbow Adapter, Push to Connect × Male NPT
90° Elbow Adapter, Push to Connect × Push to Connect
90° Elbow Connector,
Push to Connect ×
Push to Connect
Push to Connect ×
Push to Connect
Insert tubing into the fittings on these valves—no heat, solder, or flux required. To withstand aggressive and corrosive solutions, they have a chemical-resistant fluoroelastomer seal and a plastic body.
Full-port valves do not restrict flow.
Flow coefficient (Cv) is the amount of water (in gallons per minute) at 60° F that will flow through a fully open valve with a difference of 1 psi between the inlet and the outlet.
For technical drawings and 3-D models, click on a part number.
Black PVDF Plastic Body
- Valve Type: Ball
- For Use With:
Connector: Air, Argon, Carbon Dioxide, Citric Acid, Deionized Water, Ethylene Glycol, Helium, Isopropyl Alcohol, Krypton, Natural Gas, Neon, Nitrogen, Phosphoric Acid, Propane, Salt Water, Soap Solutions, Sodium Hypochlorite, Sulfuric Acid, Water, Xenon
Adapter: Air, Butane, Carbon Dioxide, Citric Acid, Deionized Water, Diesel Fuel, Ethanol, Fuel Oil, Gasoline, Helium, Hydrochloric Acid, Isopropyl Alcohol, Kerosene, Nitric Acid, Nitrogen, Oil, Oxygen, Phosphoric Acid, Propane, Salt Water, Soap Solutions, Sodium Hypochlorite, Sulfuric Acid, Water, Xylene - Ball Material: PVDF Plastic
- Seal Material: Fluoroelastomer Rubber
- Seat Material: Fluoroelastomer Rubber
Pipe Size | For Tube OD | Flow Coefficient (Cv) | Max. Pressure | Temperature Range, °F | Port Type | Port-to-Port Lg. | Each | |
90° Elbow Adapter, Push to Connect × Female NPT Threaded | ||||||||
|---|---|---|---|---|---|---|---|---|
| 1/4 | 1/4" | 0.7 | 125 psi @ 140° F | 35° to 140° | Full | 1 1/4" | 000000000 | 000000 |
| 1/4 | 3/8" | Not Rated | 125 psi @ 140° F | 35° to 140° | Full | 1 1/4" | 000000000 | 00000 |
| 1/4 | 1/2" | Not Rated | 125 psi @ 140° F | 35° to 140° | Full | 1 1/4" | 000000000 | 00000 |
| 3/8 | 1/4" | Not Rated | 125 psi @ 140° F | 35° to 140° | Full | 1 1/4" | 000000000 | 00000 |
| 3/8 | 3/8" | Not Rated | 125 psi @ 140° F | 35° to 140° | Full | 1 1/4" | 000000000 | 00000 |
| 3/8 | 1/2" | Not Rated | 125 psi @ 140° F | 35° to 140° | Full | 1 1/4" | 000000000 | 00000 |
| 1/2 | 1/4" | Not Rated | 125 psi @ 140° F | 35° to 140° | Standard | 1 5/8" | 000000000 | 00000 |
| 1/2 | 3/8" | Not Rated | 125 psi @ 140° F | 35° to 140° | Standard | 1 5/8" | 000000000 | 00000 |
| 1/2 | 1/2" | 2.8 | 125 psi @ 140° F | 35° to 140° | Standard | 1 5/8" | 000000000 | 00000 |
90° Elbow Adapter, Push to Connect × Male NPT Threaded | ||||||||
| 1/8 | 1/4" | Not Rated | 125 psi @ 140° F | 35° to 140° | Full | 1 11/16" | 000000000 | 00000 |
| 1/8 | 3/8" | Not Rated | 125 psi @ 140° F | 35° to 140° | Full | 1 11/16" | 000000000 | 00000 |
| 1/8 | 1/2" | Not Rated | 125 psi @ 140° F | 35° to 140° | Full | 1 11/16" | 000000000 | 00000 |
| 1/4 | 1/4" | Not Rated | 125 psi @ 140° F | 35° to 140° | Full | 1 11/16" | 000000000 | 00000 |
| 1/4 | 3/8" | Not Rated | 125 psi @ 140° F | 35° to 140° | Full | 1 11/16" | 000000000 | 00000 |
| 1/4 | 1/2" | Not Rated | 125 psi @ 140° F | 35° to 140° | Full | 1 11/16" | 000000000 | 00000 |
| 3/8 | 1/4" | Not Rated | 125 psi @ 140° F | 35° to 140° | Full | 1 3/4" | 000000000 | 00000 |
| 3/8 | 3/8" | Not Rated | 125 psi @ 140° F | 35° to 140° | Full | 1 3/4" | 000000000 | 00000 |
| 3/8 | 1/2" | Not Rated | 125 psi @ 140° F | 35° to 140° | Full | 1 3/4" | 000000000 | 00000 |
| 1/2 | 1/4" | Not Rated | 125 psi @ 140° F | 35° to 140° | Standard | 1 3/4" | 000000000 | 00000 |
| 1/2 | 3/8" | Not Rated | 125 psi @ 140° F | 35° to 140° | Standard | 1 3/4" | 000000000 | 00000 |
| 1/2 | 1/2" | Not Rated | 125 psi @ 140° F | 35° to 140° | Standard | 1 3/4" | 000000000 | 00000 |
90° Elbow Adapter, Push to Connect × Push to Connect | ||||||||
| __ | 1/4" × 3/8" | Not Rated | 125 psi @ 140° F | 35° to 140° | Full | 1 3/8" | 000000000 | 00000 |
| __ | 1/4" × 1/2" | Not Rated | 125 psi @ 140° F | 35° to 140° | Full | 1 11/16" | 000000000 | 00000 |
| __ | 3/8" × 1/2" | Not Rated | 125 psi @ 140° F | 35° to 140° | Full | 1 11/16" | 000000000 | 00000 |
90° Elbow Connector, Push to Connect × Push to Connect | ||||||||
| __ | 1/4" × 1/4" | Not Rated | 125 psi @ 140° F | 35° to 140° | Full | 1 3/8" | 000000000 | 00000 |
| __ | 3/8" × 3/8" | 1.9 | 125 psi @ 140° F | 35° to 140° | Full | 1 3/8" | 000000000 | 00000 |
| __ | 1/2" × 1/2" | Not Rated | 125 psi @ 140° F | 35° to 140° | Full | 1 11/16" | 000000000 | 00000 |
Black Nylon Plastic Body
- Valve Type: Ball
- For Use With: Air, Citric Acid, Deionized Water, Ethanol, Ethylene Glycol, Helium, Kerosene, Mineral Spirits, Nitrogen, Salt Water, Soap Solutions, Water, Xylene
- Ball Material: Nylon Plastic
- Seal Material: Fluoroelastomer Rubber
- Seat Material: Fluoroelastomer Rubber
| Pipe Size | For Tube OD | Flow Coefficient (Cv) | Max. Pressure | Temperature Range, °F | Port Type | Port-to-Port Lg. | Each | |
90° Elbow Adapter, Push to Connect × Female NPT Threaded | ||||||||
|---|---|---|---|---|---|---|---|---|
| 1/4 | 1/4" | 0.7 | 125 psi @ 140° F | 35° to 140° | Full | 1 1/4" | 000000000 | 000000 |
| 1/4 | 3/8" | Not Rated | 125 psi @ 140° F | 35° to 140° | Full | 1 1/4" | 000000000 | 00000 |
| 1/4 | 1/2" | Not Rated | 125 psi @ 140° F | 35° to 140° | Full | 1 1/4" | 000000000 | 00000 |
| 3/8 | 1/4" | Not Rated | 125 psi @ 140° F | 35° to 140° | Full | 1 1/4" | 000000000 | 00000 |
| 3/8 | 3/8" | Not Rated | 125 psi @ 140° F | 35° to 140° | Full | 1 1/4" | 000000000 | 00000 |
| 3/8 | 1/2" | Not Rated | 125 psi @ 140° F | 35° to 140° | Full | 1 1/4" | 000000000 | 00000 |
| 1/2 | 1/4" | Not Rated | 125 psi @ 140° F | 35° to 140° | Standard | 1 5/8" | 000000000 | 00000 |
| 1/2 | 3/8" | Not Rated | 125 psi @ 140° F | 35° to 140° | Standard | 1 5/8" | 000000000 | 00000 |
| 1/2 | 1/2" | 2.8 | 125 psi @ 140° F | 35° to 140° | Standard | 1 5/8" | 000000000 | 00000 |
90° Elbow Adapter, Push to Connect × Male NPT Threaded | ||||||||
| 1/8 | 1/4" | Not Rated | 125 psi @ 140° F | 35° to 140° | Full | 1 11/16" | 000000000 | 00000 |
| 1/8 | 3/8" | Not Rated | 125 psi @ 140° F | 35° to 140° | Full | 1 11/16" | 000000000 | 00000 |
| 1/8 | 1/2" | Not Rated | 125 psi @ 140° F | 35° to 140° | Full | 1 11/16" | 000000000 | 00000 |
| 1/4 | 1/4" | Not Rated | 125 psi @ 140° F | 35° to 140° | Full | 1 11/16" | 000000000 | 00000 |
| 1/4 | 3/8" | Not Rated | 125 psi @ 140° F | 35° to 140° | Full | 1 11/16" | 000000000 | 00000 |
| 1/4 | 1/2" | Not Rated | 125 psi @ 140° F | 35° to 140° | Full | 1 11/16" | 000000000 | 00000 |
| 3/8 | 1/4" | Not Rated | 125 psi @ 140° F | 35° to 140° | Full | 1 3/4" | 000000000 | 00000 |
| 3/8 | 3/8" | Not Rated | 125 psi @ 140° F | 35° to 140° | Full | 1 3/4" | 000000000 | 00000 |
| 3/8 | 1/2" | Not Rated | 125 psi @ 140° F | 35° to 140° | Full | 1 3/4" | 000000000 | 00000 |
| 1/2 | 1/4" | Not Rated | 125 psi @ 140° F | 35° to 140° | Standard | 1 3/4" | 000000000 | 00000 |
| 1/2 | 3/8" | Not Rated | 125 psi @ 140° F | 35° to 140° | Standard | 1 3/4" | 000000000 | 00000 |
| 1/2 | 1/2" | Not Rated | 125 psi @ 140° F | 35° to 140° | Standard | 1 3/4" | 000000000 | 00000 |
90° Elbow Adapter, Push to Connect × Push to Connect | ||||||||
| __ | 1/4" × 3/8" | Not Rated | 125 psi @ 140° F | 35° to 140° | Full | 1 3/8" | 000000000 | 00000 |
| __ | 1/4" × 1/2" | Not Rated | 125 psi @ 140° F | 35° to 140° | Full | 1 11/16" | 000000000 | 00000 |
| __ | 3/8" × 1/2" | Not Rated | 125 psi @ 140° F | 35° to 140° | Full | 1 11/16" | 000000000 | 00000 |
90° Elbow Connector, Push to Connect × Push to Connect | ||||||||
| __ | 1/4" × 1/4" | Not Rated | 125 psi @ 140° F | 35° to 140° | Full | 1 3/8" | 000000000 | 00000 |
| __ | 3/8" × 3/8" | Not Rated | 125 psi @ 140° F | 35° to 140° | Full | 1 3/8" | 000000000 | 00000 |
| __ | 1/2" × 1/2" | Not Rated | 125 psi @ 140° F | 35° to 140° | Full | 1 11/16" | 000000000 | 00000 |
Precision Flow-Adjustment Valves with Barbed Fittings for Fuel
- Valve Type: Needle
- For Use With: See Table
- Seal Material: See Table
Add fine flow control to tubing lines for butane, diesel fuel, fuel oil, gasoline, kerosene, natural gas, and propane. These valves have a barbed fitting that grips onto tubing, providing a secure hold. Turn the handle to adjust flow in small increments. Valves have metal-to-metal seats that resist temperature fluctuations.
Flow coefficient (Cv) is the amount of water (in gallons per minute) at 60° F that will flow through a fully open valve with a difference of 1 psi between the inlet and the outlet.
For technical drawings and 3-D models, click on a part number.
| For Tube ID | Pipe Size | Flow Coefficient (Cv) | Max. Pressure | Temperature Range, °F | Seal Material | Port-to-Port Lg. | For Use With | Each | |
Brass Body | |||||||||
|---|---|---|---|---|---|---|---|---|---|
NPTF Male × Barbed | |||||||||
| 3/8" | 3/8 | 1.5 | 200 psi @ 70° F | -10° to 400° | Buna-N Rubber | 1 1/8" | Butane, Diesel Fuel, Fuel Oil, Gasoline, Kerosene, Natural Gas, Propane | 00000000 | 000000 |
| 5/8" | 3/8 | 2.9 | 200 psi @ 70° F | -30° to 225° | Fluorocarbon Rubber | 1 5/16" | Oil, Butane, Diesel Fuel, Fuel Oil, Gasoline, Kerosene, Natural Gas, Propane | 00000000 | 00000 |
| 5/8" | 1/2 | 4.4 | 200 psi @ 70° F | -10° to 400° | Buna-N Rubber | 1 1/2" | Butane, Diesel Fuel, Fuel Oil, Gasoline, Kerosene, Natural Gas, Propane | 00000000 | 00000 |
| 3/4" | 1/2 | 5.5 | 200 psi @ 70° F | -10° to 400° | Fluorocarbon Rubber | 1 7/16" | Oil, Butane, Diesel Fuel, Fuel Oil, Gasoline, Kerosene, Natural Gas, Propane | 00000000 | 00000 |
Threaded Precision Flow-Adjustment Valves for Fuel
- Valve Type: Needle
- For Use With: Butane, Diesel Fuel, Fuel Oil, Gasoline, Kerosene, Natural Gas, Propane
- Seal Material: Fluorocarbon Rubber
Turn the handle to adjust the flow of butane, diesel fuel, fuel oil, gasoline, kerosene, natural gas, and propane in small increments. These valves have metal-to-metal seats that resist temperature fluctuations.
Flow coefficient (Cv) is the amount of water (in gallons per minute) at 60° F that will flow through a fully open valve with a difference of 1 psi between the inlet and the outlet.
For technical drawings and 3-D models, click on a part number.