Syringe Epoxies | McMaster-Carr

Filter by

Container Type

Begins to Harden

Clarity

DFARS Compliance

Mix Ratio

Mixing Required

Color

Consistency

Container Size

For Use On

Formulation

Maximum Temperature

Minimum Temperature

Type

Reaches Full Strength

Manufacturer

Adhesive Type

Approximate Linear Coverage @ Bead Diameter

Elongation

Shear Strength

Cure Type

For Joining

Viscosity

Forward

How can we improve?

21 Products

About Structural Adhesives

About Paint and Protective Coatings

Quick-Set Epoxy Structural Adhesives

For quick repairs, these epoxies begin to harden in 6 minutes or less. Epoxies are the strongest and most weather- and chemical-resistant structural adhesives.

The size listed is the combined total of the two parts.

50132 works especially well on plastics and composites.

Devcon Adhesives

Mfr. Model		Container				Strength
Name	No.	Size, fl. oz.	Type	Begins to Harden	Reaches Full Strength	Shear, lbs./sq. in.	Peel, lbs./in. wd.	Mix Ratio	Consistency (Viscosity)	Temp. Range, °F	Color	For Joining		Each
5 Minute Epoxy	14240	0.84	Syringe	5 min.	48 hrs.	2,500	2	1:1	Gel (Not Rated)	-40° to 200°	Amber	Metal, Plastic, Masonry, Wood	0000000	000000
5 Minute Epoxy	14250	0.84	Syringe	5 min.	12 hrs.	1,900	2	1:1	Thick Liquid (10,000 cP)	-40° to 200°	Amber	Metal, Plastic, Masonry, Wood	0000000	00000

Gorilla Adhesives

Container				Strength
Size, fl. oz.	Type	Begins to Harden	Reaches Full Strength	Shear, lbs./sq. in.	Peel	Mix Ratio	Consistency (Viscosity)	Temp. Range, °F	Color	For Joining		Each
0.84	Syringe	5 min.	24 hrs.	3,300	Not Rated	1:1	Thick Liquid (10,000 cP)	-10° to 200°	Clear	Metal, Plastic, Rubber, Glass, Wood	0000000	00000

J-B Weld Adhesives

Mfr. Model		Container				Strength
Name	No.	Size, fl. oz.	Type	Begins to Harden	Reaches Full Strength	Shear, lbs./sq. in.	Peel	Mix Ratio	Consistency (Viscosity)	Temp. Range, °F	Color	For Joining		Each
PlasticWeld	50132	0.85	Syringe	5 min.	60 min.	2,000	Not Rated	1:1	Thick Liquid (9,000 cP)	-20° to 300°	Yellow	Metal, Plastic, Rubber, Composites, Masonry, Wood	000000	00000

Adhesives

Container				Strength
Size, fl. oz.	Type	Begins to Harden	Reaches Full Strength	Shear, lbs./sq. in.	Peel, lbs./in. wd.	Mix Ratio	Consistency (Viscosity)	Temp. Range, °F	Color	For Joining		Each
0.47	Syringe	4 min.	24 hrs.	2,500	Not Rated	1:1	Gel (13,000 cP)	-40° to 200°	Amber	Metal, Plastic, Rubber	0000000	000000
1.65	Syringe	60 sec.	3 hrs.	2,500	12	1:1	Thick Liquid (15,000 cP)	-45° to 250°	Amber	Metal, Plastic, Rubber	0000000	00000

Epoxy Structural Adhesives

Epoxies are the strongest and most weather- and chemical-resistant structural adhesives. They work especially well on metals. The size listed is the combined total of the two parts.

DP110, 14310, 14260, and 305-1/2 bond dissimilar materials.

Devcon Adhesives

Mfr. Model		Container				Strength
Name	No.	Size, fl. oz.	Type	Begins to Harden	Reaches Full Strength	Shear, lbs./sq. in.	Peel, lbs./in. wd.	Mix Ratio	Consistency (Viscosity)	Temp. Range, °F	Color	For Joining		Each
2 Ton Epoxy	14310	0.84	Syringe	8 min.	16 hrs.	2,250	2	1:1	Thick Liquid (8,000 cP)	-40° to 200°	Clear	Metal, Metal to Plastic, Metal to Composites, Plastic, Plastic to Composites, Composites	0000000	000000

Adhesives

Container				Strength
Size, fl. oz.	Type	Begins to Harden	Reaches Full Strength	Shear, lbs./sq. in.	Peel, lbs./in. wd.	Mix Ratio	Consistency (Viscosity)	Temp. Range, °F	Color	For Joining		Each
1.65	Syringe	50 min.	24 hrs.	2,450	26	1:1	Thick Liquid (40,000 cP)	-45° to 250°	Amber	Metal, Plastic, Rubber	0000000	000000

Slow-Set Epoxy Structural Adhesives

To allow time to adjust and position parts, these epoxies remain workable for at least 90 minutes. The strongest and most weather- and chemical-resistant structural adhesives, epoxies work especially well on metals.

The size listed is the combined total of the two parts.

J-B Weld Adhesives

Mfr. Model		Container				Strength
Name	No.	Size, fl. oz.	Type	Begins to Harden	Reaches Full Strength	Shear, lbs./sq. in.	Peel	Mix Ratio	Consistency (Viscosity)	Max. Temperature, °F	For Joining		Each
Original	50165	0.85	Syringe	4 hrs.	24 hrs.	1,800	Not Rated	1:1	Paste (150,000 cP)	550°	Metal, Plastic, Rubber, Composites, Glass, Masonry	000000	00000

Waterproof Epoxy Structural Adhesives

Even when used under water, these adhesives maintain their strength. The most weather- and chemical-resistant structural adhesives, epoxies tend to work especially well on metals.

The size listed is the combined total of the two parts.

ClearWeld and Plastic Bonder can be applied to wet surfaces.

J-B Weld Adhesives

Mfr. Model		Container				Strength
Name	No.	Size, fl. oz.	Type	Begins to Harden	Reaches Full Strength	Shear, lbs./sq. in.	Peel	Mix Ratio	Consistency (Viscosity)	Temp. Range, °F	Color	Environment	For Joining		Each
ClearWeld	50114	0.5	Syringe	5 min.	1 hrs.	1,500	__	1:1	Paste	Not Rated to 300°	Clear	Submersible	Metal, Plastic, Rubber, Composites	0000000	00000
MarineWeld	50172	0.85	Syringe	5 min.	1 hrs.	1,800	Not Rated	1:1	Paste (100,000 cP)	-20° to 300°	White	Salt Spray, Submersible	Metal, Plastic, Rubber, Composites, Glass, Masonry, Wood	000000	0000
Plastic Bonder	50133	0.85	Syringe	15 min.	30 min.	1,700	__	1:1	Paste	Not Rated to 200°	Tan	Submersible	Plastic	0000000	0000

Optically Clear Epoxy Structural Adhesives

For invisible bond lines, these adhesives dry clear. Epoxies are the strongest and most weather- and chemical-resistant structural adhesives. Choose an epoxy that hardens quickly for fast repairs, or one that hardens slowly to allow more time for positioning.

The size listed is the combined total of the two parts.

J-B Weld Adhesives

Mfr. Model		Container				Strength
Name	No.	Size, fl. oz.	Type	Begins to Harden	Reaches Full Strength	Shear, lbs./sq. in.	Peel, lbs./in. wd.	Mix Ratio	Consistency (Viscosity)	Temp. Range, °F	For Joining		Each
ClearWeld	50112	0.85	Syringe	5 min.	60 min.	2,000	Not Rated	1:1	Thick Liquid (10,000 cP)	Not Rated to 200° F	Metal, Plastic, Rubber, Wood	0000000	00000

Low-Odor Epoxy Structural Adhesives

Bond most materials without the strong odor of other epoxy adhesives. The strongest and most weather- and chemical-resistant structural adhesives, epoxies work especially well on metals.

The size listed is the combined total of the two parts.

Container				Strength
Size, fl. oz.	Type	Begins to Harden	Reaches Full Strength	Shear, lbs./sq. in.	Peel, lbs./in. wd.	Mix Ratio	Consistency (Viscosity)	Temp. Range, °F	Color	For Joining		Each
Adhesives
1.65	Syringe	4 min.	24 hrs.	2,200	18	1:1	Thick Liquid (15,000 cP)	-45° to 250°	Amber	Metal, Plastic, Rubber, Wood	0000000	000000

Surface Fillers for Metal

Mix these two-part surface fillers together to repair leaks and cracks as well as to rebuild rough spots in metal. The size listed is the combined total of the two parts.

Devcon Plastic Steel surface fillers can repair areas where brazing and welding is impractical.

	Container
Mfr. Model No.	Size	Type	Begins to Harden, min.	Reaches Full Strength, hrs.	Consistency	Mix Ratio	Approx. Coverage @ Thick.	Temp. Range, °F	Color	Finishing Method	For Use On		Each
Devcon Plastic Steel® Epoxy
62345	0.8 fl. oz.	Syringe	60	24	Thick Liquid	1:1	6 sq. in. @ 1/4"	-40° to 200°	Dark Gray	Machine, Drill, Sand, Saw, Tap	Aluminum, Brass, Copper, Stainless Steel, Cast Iron	00000000	00000

High-Temperature Surface Fillers for Metal

Repair and rebuild metal surfaces that are exposed to heat. These surface fillers withstand temperatures over 450° F. Fillers that have a mix ratio are multi-part fillers. The size listed is the combined total of the parts.

Surface fillers in a syringe come with everything you need to make repairs.

Container
Size, fl. oz.	Type	Begins to Harden	Reaches Full Strength, hrs.	Consistency	Mix Ratio	Approx. Coverage @ Thick.	Temp. Range, °F	Color	Finishing Method	For Use On		Each
Surface Fillers
1.5	Syringe	20 min.	24	Putty	9.1:1	1 sq. in. @ 1/4"	-40° to 500°	Gray	Machine, Drill, Saw	Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium, Fiberglass	0000000	000000

Surface Fillers

These surface fillers can be used on vertical surfaces without sagging. They repair cracked, worn, and damaged surfaces. The size listed is the combined total of the two parts.

	Container
Mfr. Model No.	Size	Type	Begins to Harden, min.	Reaches Full Strength	Consistency	Mix Ratio	Approx. Coverage @ Thick.	Temp. Range, °F	Color	Finishing Method	For Use On		Each
Loctite® Fixmaster Poxy Pak™
EA 9017	0.8 fl. oz.	Syringe	5	60 min.	Thick Liquid	1:1	Not Rated	-65° to 300°	Clear	Sand	Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium, ABS Plastic, CPVC Plastic, PETG Plastic, Polycarbonate Plastic, Polyimide Plastic, Polystyrene Plastic, Polyurethane Rubber, PVC Plastic, PVDF Plastic, Concrete, Glass, Wood	0000000	000000

Heat-Transfer Potting Compounds

Formulated to draw heat away from sensitive electronic components, these potting compounds have higher thermal conductivity than standard potting compounds. Use them to encase electronic assemblies for protection from dust, chemicals, moisture, mechanical shock, and vibration. Rigid and wear resistant, epoxies are the strongest of the potting compounds. They have excellent chemical and moisture resistance, withstand a wide range of temperatures, and provide excellent electrical insulation.

Jar and Syringe Compounds—Extra Hard

		Dry Time
Container Size, fl. oz.	Consistency	Touch	Overall, hrs.	Dielectric Strength, V/mil	Thermal Conductivity, W/m-K	Max. Temp., °F	Heating Requirements to Reach Full Strength	For Use On	Color		Each
0.9	Thick Liquid	25 min.	24	450	1.87	500°	1 hr. @ 250° F then 1 hr. @ 350° F	Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Iron, Silver, Titanium, Plastic, Composites, Ceramic, Glass	Black	0000000	000000
1	Gel	4 hrs.	6	Not Rated	1.87	600°	4 hrs. @ 250° F then 2 hrs. @ 350° F	Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Iron, Silver, Titanium, Plastic, Composites, Ceramic, Glass	Black	0000000	00000
1.5	Thin Liquid	30 min.	26	450	0.59	500°	1 hr. @ 250° F then 1 hr. @ 350° F	Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Iron, Silver, Titanium, Plastic, Composites, Ceramic, Glass	Amber	0000000	00000

Adjustable-Flexibility Heat-Transfer Potting Compounds

Mixing required—resin and hardener come in two separate jars or in a jar and syringe and must be combined before applying. Change the mix ratio of these heat-transfer potting compounds to achieve the right hardness for your application. They're formulated to draw heat away from sensitive electronic components, so they have higher thermal conductivity than standard potting compounds. Use them to encase electronic assemblies for protection from dust, chemicals, moisture, mechanical shock, and vibration. Rigid and wear resistant, epoxies are the strongest of the potting compounds. They have excellent chemical and moisture resistance, withstand a wide range of temperatures, and provide excellent electrical insulation.

The size listed is the combined total of the two parts.

		Dry Time
Container Size, fl. oz.	Consistency	Touch, min.	Overall, hrs.	Hardness Rating	Dielectric Strength, V/mil	Thermal Conductivity, W/m-K	Temp. Range, °F	Heating Requirements to Reach Full Strength	For Use On	Color		Each
Jar and Syringe Compounds
1.6	Thick Liquid	30	26	Extra Hard, Medium Hard, Medium Soft, Soft	450	1.01	-100° to 450°	2 hrs. @ 250° F	Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Plastic, Ceramic, Glass	Tan	000000	000000