McMaster-Carr logo
    Filter by
    Mounting Location
    Electrical Phase
    Drive Type
    Shape
    Power Source
    Number of Speeds
    Electrical Connection Type
    Blade Material
    U.S.–Mexico–Canada Agreement (USMCA) Qualifying
    DFARS Specialty Metals
    Export Control Classification Number (ECCN)
    Industrial Info Snippet
    Forward
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Print
    How can we improve?
    Comments
    E-mail address (if you would like a response)
    142 Products

    Direct-Drive Wall-Mount Exhaust Fans with Louvers

    Image of Product. Front orientation. Exhaust Fans. Direct-Drive Wall-Mount Exhaust Fans with Louvers.
    These fans come complete with a movable-blade louver. The louvers are gravity operated so they open only when air flows through them, which prevents backdrafts. Direct-drive fans have fewer moving parts than belt-drive fans for less maintenance. Use these fans to draw stagnant and humid air out of a room or area. All have an open dripproof (ODP) motor enclosure for relatively clean, dry, indoor locations. They also have a wire mesh inlet guard to protect the fan from debris.
    120V AC, Single Phase (Hardwire)—Open Dripproof (ODP) Motor Enclosure
    For
    Opening
    Overall
    Blade
    Dia.
    Airflow,
    ft³/min
    Volume (Sound)
    @ Distance
    Drive
    Type
    Motor Speed,
    rpm
    No. of
    Speeds
    Power,
    hp
    Ht.
    Wd.
    Ht.
    Wd.
    Dp.
    Housing
    Material
    Frame Material
    Blade
    Material
    Features
    Certification
    Each
    10"87056 dBA @ 5 ft.Direct1,55011/2017 1/4"17 1/4"19 1/2"19 1/2"20 3/4"SteelGalvanized SteelAluminum
    		Wire Mesh Inlet GuardC-UL Listed, UL Listed
    		19105K18000000000
    12"1,50060 dBA @ 5 ft.Direct1,55011/817 1/4"17 1/4"19 1/2"19 1/2"20 3/4"SteelGalvanized SteelAluminum
    		Wire Mesh Inlet GuardC-UL Listed, UL Listed
    		19105K1900000000
    16"2,50061 dBA @ 5 ft.Direct1,30011/221 1/4"21 1/4"23 1/2"23 1/2"25 1/4"SteelGalvanized SteelAluminum
    		Wire Mesh Inlet GuardC-UL Listed, UL Listed
    		19105K2400000000
    18"3,80065 dBA @ 5 ft.Direct1,30013/425 1/4"25 1/4"27 1/2"27 1/2"26 1/4"SteelGalvanized SteelAluminum
    		Wire Mesh Inlet GuardC-UL Listed, UL Listed
    		19105K2500000000
    24"6,60067 dBA @ 5 ft.Direct1,07513/431 1/4"31 1/4"33 1/2"33 1/2"30 1/4"SteelGalvanized SteelAluminum
    		Wire Mesh Inlet GuardC-UL Listed, UL Listed
    		19105K2600000000
    Replacement Fan Motors
    Image of Product. Front orientation. Fan Motors. Direct-Drive Wall-Mount Exhaust Fans with Louvers.
    For Airflow,
    ft³/min
    Motor Speed,
    rpm
    Power,
    hp
    Each
    120V AC
     
    Single Phase
    8701,5501/2019105K510000000
    1,5001,5501/819105K52000000
    2,5001,3001/219105K53000000
    3,8001,3003/419105K54000000
    6,6001,0753/419105K55000000
     
    208 to 230V AC/460V AC, Three Phase (Hardwire)—Open Dripproof (ODP) Motor Enclosure
    For
    Opening
    Overall
    Blade
    Dia.
    Airflow,
    ft³/min
    Volume (Sound)
    @ Distance
    Drive
    Type
    Motor Speed,
    rpm
    No. of
    Speeds
    Power,
    hp
    Ht.
    Wd.
    Ht.
    Wd.
    Dp.
    Housing
    Material
    Frame Material
    Blade
    Material
    Features
    Certification
    Each
    24"5,20069 dBA @ 5 ft.Direct1,12511/231 1/4"31 1/4"33 1/2"33 1/2"30 1/4"SteelGalvanized SteelAluminum
    		Wire Mesh Inlet GuardC-UL Listed, UL Listed
    		19105K27000000000
    Replacement Fan Motors
    Image of Product. Front orientation. Fan Motors. Direct-Drive Wall-Mount Exhaust Fans with Louvers.
    For Airflow,
    ft³/min
    Motor Speed,
    rpm
    Power,
    hp
    Each
     
    Three Phase
    5,2001,1251/219105K56000000000
     
    230/460V AC, Three Phase—Hardwire
    Cannot Be Sold to California—Fans that cannot be sold to California are restricted by local energy efficiency requirements.
    For
    Opening
    Overall
    Blade
    Dia.
    Airflow,
    ft³/min
    Volume (Sound)
    @ Distance
    Drive
    Type
    Motor Speed,
    rpm
    No. of
    Speeds
    Power,
    hp
    Ht.
    Wd.
    Ht.
    Wd.
    Dp.
    Housing
    Material
    Frame Material
    Blade
    Material
    Features
    Certification
    Cannot Be
    Sold To
    Each
    30"8,40074 dBA @ 5 ft.Direct1,1251137 1/4"37 1/4"39 1/2"39 1/2"27 1/2"SteelGalvanized SteelAluminum
    		Wire Mesh Inlet GuardC-UL Listed, UL Listed
    		California19105K31000000000
    36"12,30074 dBA @ 5 ft.Direct85011 1/243 1/4"43 1/4"45 1/2"45 1/2"31 1/2"SteelGalvanized SteelAluminum
    		Wire Mesh Inlet GuardC-UL Listed, UL Listed
    		California19105K4200000000

    Direct-Drive Upblast Roof-Mount Exhaust Fans

    Image of Product. Front orientation. Exhaust Fans. Direct-Drive Upblast Roof-Mount Exhaust Fans , Style 1.

    Style 1

    Direct-drive fans have fewer moving parts than belt-drive fans for less maintenance. These exhaust fans draw stagnant and humid air out through your roof and then expel it up and away from the roof surface. All fans have a disconnect switch to turn off the power for servicing.
    Note: Airflow depends on the resistance created by ductwork. This resistance, known as static pressure (SP), is measured in inches of water.
    Exhaust Fans
    Mounting Bases
    Overall
    Style
    Blade
    Dia.
    Airflow @ SP
    Volume (Sound)
    @ Distance
    Motor Speed,
    rpm
    Power,
    hp
    Dia.
    Ht.
    Base
    Wd.
    Wt.,
    lb.
    Ambient
    Temp., ° F
    Housing
    Material
    Certification
    Each
    Each
    Open Dripproof (ODP) Motor Enclosure
     
    120V AC, Single Phase—Hardwire
    19"300 ft³/min @ 1/2 in. H₂O
    400 ft³/min @ 0 in. H₂O    		54 dBA @ 5 ft.1,3001/3217 3/4"14 1/2"19"40120Aluminum
    		AMCA Certified, ETL Listed
    		2232K3100000002230K640000000
    111"400 ft³/min @ 1/2 in. H₂O
    710 ft³/min @ 0 in. H₂O    		60 dBA @ 5 ft.1,6253/1622"18"19"43300Aluminum
    		AMCA Certified, ETL Listed
    		2232K550000002230K64000000
    111 3/4"750 ft³/min @ 1/2 in. H₂O
    1,050 ft³/min @ 0 in. H₂O    		59 dBA @ 5 ft.1,3001/425 1/2"25 1/4"21"67300Aluminum
    		AMCA Certified, ETL Listed
    		2232K320000002230K31000000
    112"1,100 ft³/min @ 1/2 in. H₂O
    1,300 ft³/min @ 0 in. H₂O    		68 dBA @ 5 ft.1,6251/325 1/2"25 1/4"21"50300Aluminum
    		AMCA Certified, ETL Listed
    		2232K230000002230K31000000
    113 3/4"1,500 ft³/min @ 1/2 in. H₂O
    1,950 ft³/min @ 0 in. H₂O    		68 dBA @ 5 ft.1,4751/228 7/8"27 1/4"21"78300Aluminum
    		AMCA Certified, ETL Listed
    		2232K340000002230K31000000
    116"2,450 ft³/min @ 1/2 in. H₂O
    2,900 ft³/min @ 0 in. H₂O    		69 dBA @ 5 ft.1,6253/431 7/8"30 1/2"24 3/4"80300Aluminum
    		AMCA Certified, ETL Listed
    		2232K24000000002230K34000000
     
    208 to 230V AC, Three Phase—Hardwire
    118 3/4"3,750 ft³/min @ 1/2 in. H₂O
    4,100 ft³/min @ 0 in. H₂O    		68 dB @ 5 ft.1,150237 3/8"33 3/4"28"184300Aluminum
    		AMCA Certified, ETL Listed
    		2232K25000000002230K35000000
    120 3/4"5,900 ft³/min @ 1/2 in. H₂O
    6,450 ft³/min @ 0 in. H₂O    		85 dBA @ 5 ft.1,425537 3/8"33 1/4"28"221300Aluminum
    		AMCA Certified, ETL Listed
    		2232K37000000002230K35000000
    124"7,000 ft³/min @ 1/2 in. H₂O
    7,750 ft³/min @ 0 in. H₂O    		72 dBA @ 5 ft.900341 7/8"37 1/2"33"312300Aluminum
    		AMCA Certified, ETL Listed
    		2232K38000000002230K39000000
    130"9,500 ft³/min @ 1/2 in. H₂O
    10,500 ft³/min @ 0 in. H₂O    		71 dBA @ 5 ft.725551 1/4"44"40"497300Aluminum
    		AMCA Certified, ETL Listed
    		2232K39000000002230K94000000
     

    Direct-Drive Wall-Mount Exhaust Fans

    Direct-drive fans have fewer moving parts than belt-drive fans for less maintenance. Use these fans to draw stagnant and humid air out of a room or area.
    120V AC, Single Phase (Hardwire)—Open Dripproof (ODP) Motor Enclosure
    Image of Product. Front orientation. Open Dripproof (ODP) Motor Enclosure. Direct-Drive Wall-Mount Exhaust Fans .
    Fans with an open dripproof (ODP) motor enclosure are for relatively clean, dry, indoor locations.
    Exhaust Fan Collars—Use a collar (sold separately) to connect these fans to a louver.
    Exhaust Fans
    Exhaust Fan
    Collars
    Overall
    Blade
    Dia.
    Airflow,
    ft³/min
    Volume (Sound)
    @ Distance
    Drive
    Type
    Motor Speed,
    rpm
    No. of
    Speeds
    Power,
    hp
    Ht.
    Wd.
    Dp.
    Ambient
    Temp., ° F
    Frame Material
    Blade
    Material
    Certification
    Each
    Each
    8"40053 dBA @ 5 ft.Direct1,55011/2512 1/8"12 1/8"5 3/8"100Powder-Coated SteelAluminum
    		C-UL Listed, UL Listed
    		1932K3100000005353K310000000
    10"80057 dBA @ 5 ft.Direct1,55011/2016 1/8"16 1/8"8 3/8"100Powder-Coated SteelAluminum
    		C-UL Listed, UL Listed
    		1932K320000005353K22000000
    12"1,50060 dBA @ 5 ft.Direct1,55011/816 1/8"16 1/8"8"100Powder-Coated SteelAluminum
    		C-UL Listed, UL Listed
    		1932K130000005353K22000000
    14"2,40068 dBA @ 5 ft.Direct1,55011/320 1/8"20 1/8"9 7/8"100Powder-Coated SteelAluminum
    		C-UL Listed, UL Listed
    		1932K330000005353K24000000
    16"3,40069 dBA @ 5 ft.Direct1,55013/420 1/8"20 1/8"11 1/4"100Powder-Coated SteelAluminum
    		C-UL Listed, UL Listed
    		1932K340000005353K24000000
    18"4,20069 dBA @ 5 ft.Direct1,55013/424 1/8"24 1/8"11 3/4"100Powder-Coated SteelAluminum
    		C-UL Listed, UL Listed
    		1932K350000005353K25000000
    20"4,10064 dBA @ 5 ft.Direct1,07511/224 1/8"24 1/8"10 5/8"100Powder-Coated SteelAluminum
    		C-UL Listed, UL Listed
    		1932K170000005353K25000000
    24"6,60067 dBA @ 5 ft.Direct1,07513/430 1/8"30 1/8"11 1/8"100Powder-Coated SteelAluminum
    		C-UL Listed, UL Listed
    		1932K180000005353K26000000

    Exterior-Wall-Mount Exhaust Fans

    Good when you don't have room to mount an exhaust fan inside your facility, these fans attach to openings in outside walls. Use them to draw stagnant and humid air out of a room or area.
    Note: Airflow depends on the resistance created by louvers, filters, and ductwork in your system. This resistance, known as static pressure (SP), is measured in inches of water.
    120V AC, Single Phase (Hardwire)—Open Dripproof (ODP) Motor Enclosure
    Image of Product. Front orientation. Open Dripproof (ODP) Motor Enclosure. Exterior-Wall-Mount Exhaust Fans.
    Fans with an open dripproof (ODP) motor enclosure should be used in clean, dry, and indoor locations. You can use these fans with or without duct. To use them with duct, you'll need an angle ring (not included).
    Direct Drive—Direct-drive fans have fewer moving parts than belt-drive fans, so they’re easier to maintain.
    Grilles—Grilles (sold separately) have fixed blades.
    Louvers—Louvers are gravity operated. The blades open when air flows and close when it stops, preventing backdrafts.
    Exhaust Fans
    Grilles
    Louvers
    For
    Opening
    Overall
    Blade
    Dia.
    Airflow @ SP
    Volume (Sound)
    @ Distance
    Drive
    Type
    Motor Speed,
    rpm
    No. of
    Speeds
    Power,
    hp
    Dia.
    Ht.
    Wd.
    Dia.
    Dp.
    Ambient
    Temp., ° F
    Blade
    Material
    Mounting Fasteners
    Included
    Certification
    Each
    Each
    Each
    7"190 ft³/min @ 0 in. H₂O39 dBA @ 15 ft.Direct1,05011/258"8"8"17 1/8"13"180Aluminum
    		NoC-UL Listed, UL Listed
    		1925K100000001925K810000001925K91000000
    10"250 ft³/min @ 1/4 in. H₂O
    550 ft³/min @ 0 in. H₂O    		42 dBA @ 15 ft.Direct1,05011/2510"10"10"21 1/8"16"180Aluminum
    		NoC-UL Listed, UL Listed
    		1925K20000001925K82000001925K9200000
    13"1,400 ft³/min @ 1/4 in. H₂O
    1,600 ft³/min @ 0 in. H₂O    		49 dBA @ 15 ft.Direct1,07511/612"12"12"30 3/16"28 3/4"180Aluminum
    		NoC-UL Listed, UL Listed
    		1925K40000001925K84000001925K9300000
    16"2,400 ft³/min @ 1/4 in. H₂O
    2,800 ft³/min @ 0 in. H₂O    		56 dBA @ 15 ft.Direct1,07511/314"16"16"34 11/16"30 7/8"180Aluminum
    		NoC-UL Listed, UL Listed
    		1925K5000000001925K850000001925K9400000
    120/230V AC, Single Phase (Hardwire)—Open Dripproof (ODP) Motor Enclosure
    Image of Product. Front orientation. Open Dripproof (ODP) Motor Enclosure. Exterior-Wall-Mount Exhaust Fans.
    Fans with an open dripproof (ODP) motor enclosure should be used in clean, dry, and indoor locations. You can use these fans with or without duct. To use them with duct, you'll need an angle ring (not included).
    Direct Drive—Direct-drive fans have fewer moving parts than belt-drive fans, so they’re easier to maintain.
    Grilles—Grilles (sold separately) have fixed blades.
    Louvers—Louvers are gravity operated. The blades open when air flows and close when it stops, preventing backdrafts.
    Exhaust Fans
    Grilles
    Louvers
    For
    Opening
    Overall
    Blade
    Dia.
    Airflow @ SP
    Volume (Sound)
    @ Distance
    Drive
    Type
    Motor Speed,
    rpm
    No. of
    Speeds
    Power,
    hp
    Dia.
    Ht.
    Wd.
    Dia.
    Dp.
    Ambient
    Temp., ° F
    Blade
    Material
    Mounting Fasteners
    Included
    Certification
    Each
    Each
    Each
    18"4,000 ft³/min @ 1/4 in. H₂O
    4,300 ft³/min @ 0 in. H₂O    		58 dBA @ 15 ft.Direct1,12513/420"20"20"39 7/16"35 5/8"180Aluminum
    		NoC-UL Listed, UL Listed
    		1925K620000000001925K8700000001925K970000000

    Belt-Drive Wall-Mount Exhaust Fans with Louvers

    Image of Product. Front orientation. Exhaust Fans. Belt-Drive Wall-Mount Exhaust Fans with Louvers .
    These fans come complete with a movable-blade louver. The louvers are gravity operated so they open only when air flows through them, which prevents backdrafts. Belt-drive fans are quieter and have a longer life span than direct-drive fans because components can be replaced if worn or damaged. Use these fans to draw stagnant and humid air out of a room or area.
    120V AC, Single Phase (Hardwire)—Open Dripproof (ODP) Motor Enclosure
    Fans with an open dripproof (ODP) motor enclosure are for relatively clean, dry, indoor locations.
    For
    Opening
    Overall
    Blade
    Dia.
    Airflow,
    ft³/min
    Volume (Sound)
    @ Distance
    Drive
    Type
    Motor Speed,
    rpm
    No. of
    Speeds
    Power,
    hp
    Ht.
    Wd.
    Ht.
    Wd.
    Dp.
    Wt.,
    lb.
    Ambient
    Temp., ° F
    Housing
    Material
    Frame
    Material
    Blade
    Material
    Mounting Fasteners
    Included
    Mounting
    Hole Dia.
    Each
    30"6,00055 dB @ 5 ft.Belt55011/237"37"36 1/2"36 1/2"19"152104SteelSteelSteelNo3/16"2101K12000000000
    36"8,10053 dB @ 5 ft.Belt40011/243"43"42 1/2"42 1/2"19"121104SteelSteelSteelNo3/16"2101K1300000000
    42"11,00057 dB @ 5 ft.Belt40013/449"49"48 1/2"48 1/2"19"270104SteelSteelSteelNo3/16"2101K1400000000
    48"14,90057 dB @ 5 ft.Belt3501155"55"54 1/2"54 1/2"19"266104SteelSteelSteelNo3/16"2101K1500000000
    Replacements for Exhaust Fans
    Replacement V-Belts
    Image of Product. Front orientation. V-Belts. Belt-Drive Wall-Mount Exhaust Fans with Louvers .
    For Blade
    Dia.
    Each
    30"2192K125000000
    36"2192K12600000
    42"2101K10300000
    48"2192K12700000
    Replacement Fan Blades
    Image of Product. Front orientation. Fan Blades. Belt-Drive Wall-Mount Exhaust Fans with Louvers .
    Blade
    Dia.
    Material
    No.
    of
    Each
    30"Galvanized Steel42192K1220000000
    36"Galvanized Steel42192K123000000
    42"Steel42101K108000000
    48"Galvanized Steel42192K124000000
    Replacement Fan Motors
    Image of Product. Front orientation. Fan Motors. Belt-Drive Wall-Mount Exhaust Fans with Louvers .
    Each
    2101K910000000
    2101K92000000
    2101K93000000
     

    Direct-Drive Downdraft Roof-Mount Exhaust Fans

    Image of Product. Front orientation. Exhaust Fans. Direct-Drive Downdraft Roof-Mount Exhaust Fans, Style 1.
    Image of Product. Front orientation. Exhaust Fans. Direct-Drive Downdraft Roof-Mount Exhaust Fans, Style 2.

    Style 1

    Style 2

    Direct-drive fans have fewer moving parts than belt-drive fans for less maintenance. More economical than upblast roof-mount exhaust fans, these draw stagnant and humid air out through your roof and then direct it back toward the roof. All fans have a disconnect switch to turn off the power for servicing.
    Note: Airflow depends on the resistance created by ductwork. This resistance, known as static pressure (SP), is measured in inches of water.
    Exhaust Fans
    Mounting Bases
    Overall
    Style
    Blade
    Dia.
    Airflow @ SP
    Volume (Sound)
    @ Distance
    Motor Speed,
    rpm
    Power,
    hp
    Dia.
    Ht.
    Base
    Wd.
    Wt.,
    lb.
    Ambient Temp.,
    ° F
    Housing
    Material
    Certification
    Each
    Each
    Open Dripproof (ODP) Motor Enclosure
     
    120V AC, Single Phase—Hardwire
    19"100 ft³/min @ 1/2 in. H₂O
    400 ft³/min @ 0 in. H₂O    		50 dBA @ 5 ft.1,2501/3220 3/4"14 1/2"19"40120Aluminum
    		AMCA Certified, ETL Listed
    		2011K2100000002230K110000000
    111"600 ft³/min @ 1/2 in. H₂O
    800 ft³/min @ 0 in. H₂O    		57 dBA @ 5 ft.1,6253/1623 3/4"16 1/4"19"37Not RatedAluminum
    		AMCA Certified, ETL Listed
    		2011K540000002230K11000000
    112"950 ft³/min @ 1/2 in. H₂O
    1,250 ft³/min @ 0 in. H₂O    		62 dBA @ 5 ft.1,6251/426 1/4"19 1/8"21"53Not RatedAluminum
    		AMCA Certified, ETL Listed
    		2011K650000002230K13000000
    114"1,800 ft³/min @ 1/2 in. H₂O
    2,100 ft³/min @ 0 in. H₂O    		66 dBA @ 5 ft.1,6251/229 3/4"21 3/4"21"56Not RatedAluminum
    		AMCA Certified, ETL Listed
    		2011K570000002230K13000000
    116"2,600 ft³/min @ 1/2 in. H₂O
    3,100 ft³/min @ 0 in. H₂O    		70 dBA @ 5 ft.1,4503/433 1/4"23 3/8"24"77120Aluminum
    		AMCA Certified, ETL Listed
    		2011K220000002230K34000000
     
    208/230V AC Three Phase—Hardwire
    219"4,500 ft³/min @ 1/2 in. H₂O
    5,000 ft³/min @ 0 in. H₂O    		75 dBA @ 5 ft.1,300238 15/16"32 3/4"28"189120Aluminum
    		AMCA Certified, ETL Listed
    		2011K23000000002230K35000000
    221"6,200 ft³/min @ 1/2 in. H₂O
    6,700 ft³/min @ 0 in. H₂O    		82 dBA @ 5 ft.1,400538 15/16"32 1/4"28"201120Aluminum
    		AMCA Certified, ETL Listed
    		2011K24000000002230K35000000
    224"8,100 ft³/min @ 1/2 in. H₂O
    9,000 ft³/min @ 0 in. H₂O    		73 dBA @ 5 ft.925343 7/16"37 1/4"33"288120Aluminum
    		AMCA Certified, ETL Listed
    		2011K25000000002230K39000000
    230"10,400 ft³/min @ 1/2 in. H₂O
    11,500 ft³/min @ 0 in. H₂O    		69 dBA @ 5 ft.700552 13/16"44"40"467120Aluminum
    		AMCA Certified, ETL Listed
    		2011K26000000002230K94000000
    236"11,000 ft³/min @ 1/2 in. H₂O
    13,500 ft³/min @ 0 in. H₂O    		64 dBA @ 5 ft.450563 5/16"49 1/2"44"532120Aluminum
    		AMCA Certified, ETL Listed
    		2011K27000000002230K57000000
     

    Belt-Drive Downdraft Roof-Mount Exhaust Fans

    Belt-drive fans are quieter and have a longer life span than direct-drive fans because components can be replaced if worn or damaged. More economical than upblast roof-mount exhaust fans, these draw stagnant and humid air out through your roof and then direct it back toward the roof.
    Note: Airflow depends on the resistance created by ductwork. This resistance, known as static pressure (SP), is measured in inches of water.
    120V AC/208 to 230V AC, Single Phase (Hardwire)—Open Dripproof (ODP) Motor Enclosure
    Image of Product. Front orientation. Exhaust Fans. Belt-Drive Downdraft Roof-Mount Exhaust Fans .
    Exhaust Fans
    Mounting Bases
    Overall
    Blade
    Dia.
    Airflow @ SP
    Volume (Sound)
    @ Distance
    Drive
    Type
    Motor Speed,
    rpm
    No. of
    Speeds
    Power,
    hp
    Dia.
    Ht.
    Base
    Wd.
    Housing
    Material
    Blade
    Material
    Features
    Each
    Each
    16"2,800 ft³/min @ 1/2 in. H₂O
    3,200 ft³/min @ 0 in. H₂O    		70 dBA @ 5 ft.Belt1,14513/433 11/16"29 1/4"26"Aluminum
    		Aluminum
    		Bird Screen2207K310000000002230K340000000
    20"4,900 ft³/min @ 1/2 in. H₂O
    5,400 ft³/min @ 0 in. H₂O    		74 dBA @ 5 ft.Belt1,08011 1/238 1/4"31 3/4"30"Aluminum
    		Aluminum
    		Bird Screen2207K32000000002230K36000000
    208 to 230V AC/460V AC, Three Phase (Hardwire)—Open Dripproof (ODP) Motor Enclosure
    Image of Product. Front orientation. Exhaust Fans. Belt-Drive Downdraft Roof-Mount Exhaust Fans .
    Exhaust Fans
    Mounting Bases
    Overall
    Blade
    Dia.
    Airflow @ SP
    Volume (Sound)
    @ Distance
    Drive
    Type
    Motor Speed,
    rpm
    No. of
    Speeds
    Power,
    hp
    Dia.
    Ht.
    Base
    Wd.
    Housing
    Material
    Blade
    Material
    Features
    Each
    Each
    24"6,900 ft³/min @ 1/2 in. H₂O
    7,750 ft³/min @ 0 in. H₂O    		73 dBA @ 5 ft.Belt8751244 1/4"39 11/16"33"Aluminum
    		Aluminum
    		Bird Screen2207K330000000002230K390000000

    Belt-Drive Wall-Mount Exhaust Fans

    Use these fans to draw stagnant and humid air out of a room or area. Belt-drive fans are quieter and have a longer life span than direct-drive fans because components can be replaced if worn or damaged. All have an open dripproof (ODP) motor enclosure for relatively clean, dry, indoor locations.
    120V AC, Single Phase (Hardwire)—Open Dripproof (ODP) Motor Enclosure
    Image of Product. Back orientation. Exhaust Fans. Belt-Drive Wall-Mount Exhaust Fans .
    Image of Product. Front orientation. Exhaust Fan Collars. Belt-Drive Wall-Mount Exhaust Fans .

    Exhaust Fan Collars

    Exhaust Fan Collars—Collars and louvers are sold separately. Use a collar to connect a wall-mount exhaust fan to a louver.
    Exhaust Fans
    Exhaust Fan
    Collars
    Overall
    Blade
    Dia.
    Airflow,
    ft³/min
    Volume (Sound)
    @ Distance
    Drive
    Type
    Motor Speed,
    rpm
    No. of
    Speeds
    Power,
    hp
    Ht.
    Wd.
    Dp.
    Frame
    Material
    Blade
    Material
    Each
    Each
    30"8,20056 dB @ 5 ft.Belt60011/236"36"18 3/8"SteelSteel2192K6400000005353K150000000
    36"10,60056 dB @ 5 ft.Belt42511/242"42"18 5/8"SteelSteel2192K67000000005353K16000000
    48"18,50061 dB @ 5 ft.Belt4001154"54"24 3/4"SteelSteel2192K77000000005353K18000000
    Replacements for Exhaust Fans
    Replacement V-Belts
    Image of Product. Front orientation. V-Belts. Belt-Drive Wall-Mount Exhaust Fans .
    For Blade
    Dia.
    Each
    30"2192K125000000
    36"2192K12600000
    48"2192K12700000
    Replacement Fan Blades
    Image of Product. Front orientation. Fan Blades. Belt-Drive Wall-Mount Exhaust Fans .
    Blade
    Dia.
    Material
    No.
    of
    Each
    30"Galvanized Steel42192K1220000000
    36"Galvanized Steel42192K123000000
    48"Galvanized Steel42192K124000000
    Replacement Fan Motors
    Image of Product. Front orientation. Fan Motors. Belt-Drive Wall-Mount Exhaust Fans .
    Each
    2101K910000000
    2101K93000000
     
    230/460V AC, Three Phase—Hardwire
    Image of Product. Back orientation. Exhaust Fans. Belt-Drive Wall-Mount Exhaust Fans .
    Image of Product. Front orientation. Exhaust Fan Collars. Belt-Drive Wall-Mount Exhaust Fans .

    Exhaust Fan Collars

    Exhaust Fan Collars—Collars and louvers are sold separately. Use a collar to connect a wall-mount exhaust fan to a louver.
    Exhaust Fans
    Exhaust Fan
    Collars
    Overall
    Blade
    Dia.
    Airflow,
    ft³/min
    Volume (Sound)
    @ Distance
    Drive
    Type
    Motor Speed,
    rpm
    No. of
    Speeds
    Power,
    hp
    Ht.
    Wd.
    Dp.
    Frame
    Material
    Blade
    Material
    Each
    Each
    30"8,20056 dB @ 5 ft.Belt60011/236"36"18 3/8"SteelSteel2192K2200000005353K150000000
    36"10,60056 dB @ 5 ft.Belt42511/242"42"18 5/8"SteelSteel2192K320000005353K16000000
    48"18,50056 dB @ 5 ft.Belt4001154"54"24 3/4"SteelSteel2192K53000000005353K18000000
    Replacements for Exhaust Fans
    Replacement V-Belts
    Image of Product. Front orientation. V-Belts. Belt-Drive Wall-Mount Exhaust Fans .
    For Blade
    Dia.
    Each
    30"2192K125000000
    36"2192K12600000
    48"2192K12700000
    Replacement Fan Blades
    Image of Product. Front orientation. Fan Blades. Belt-Drive Wall-Mount Exhaust Fans .
    Blade
    Dia.
    Material
    No.
    of
    Each
    30"Galvanized Steel42192K1220000000
    36"Galvanized Steel42192K123000000
    48"Galvanized Steel42192K124000000
    Replacement Fan Motors
    Image of Product. Front orientation. Fan Motors. Belt-Drive Wall-Mount Exhaust Fans .
    Each
    2192K1280000000
    2192K121000000
     

    Floor-Mount Fume Exhausters

    Image of Product. Front orientation. Fume Exhausters. Floor-Mount Fume Exhausters, Galvanized Steel.

    Galvanized Steel

    Mount these exhausters to the floor to remove fumes, vapors, and fine dust particles from your space. They are commonly used in welding, soldering, and other operations that create fumes.
    Open Dripproof (ODP) Motor Enclosure—Use open dripproof exhausters in relatively clean, dry, well-ventilated indoor locations.
    Airflow @ Static Pressure—Airflow depends on the resistance created by ductwork. This resistance, known as static pressure (SP), is measured in inches of water.
    Overall
    Mounting
    Airflow @ SP
    Volume (Sound)
    @ Distance
    Power,
    hp
    Inlet
    Dia.
    Outlet
    Dia.
    Ht.
    Wd.
    Dp.
    Housing
    Material
    Base
    Material
    Wheel
    Material
    Fasteners
    Included
    For Screw
    Size
    Hole
    Dia.
    No. of
    Holes
    Each
    Open Dripproof (ODP) Motor Enclosure
     
    120V AC, Single Phase—Hardwire
    800 ft³/min @ 1/2 in. H₂O65 dBC @ 15 ft.1/36"6"15 1/8"16"20 3/8"Galvanized SteelSteelSteelNo1/4"
    		9/32"41951K10000000
     

    Direct-Drive Exhaust Fans

    With fewer moving parts than belt-drive fans, these direct-drive exhaust fans require less maintenance. They have a built-in grease pan to collect waste while cooking. Mount these fans directly to your roof with the attached mounting brackets. They meet UL standards for ventilation in residential, commercial, and institutional kitchens.
    208V AC, Three Phase (Hardwire)—Open Dripproof (ODP) Motor Enclosure
    Image of Product. Front orientation. Exhaust Fans. Direct-Drive Exhaust Fans.
    Blade
    Dia.
    Airflow @ SP
    Volume (Sound)
    @ Distance
    Drive
    Type
    Motor Speed,
    rpm
    No. of
    Speeds
    Power,
    hp
    Overall
    Ht.
    Base
    Wd.
    Max. Ambient
    Temp., ° F
    Housing
    Material
    Blade
    Material
    Features
    Specs. Met
    Certification
    Each
    16"3,000 ft³/min @ 1/2 in. H₂O
    3,500 ft³/min @ 0 in. H₂O    		71 dB @ 5 ft.Direct1,650Variable1 1/259 3/4"32 5/8"350SteelAluminum
    		Grease PanUL 705, UL 762, ULC-S645ETL Listed
    		4706N13000000000
    19"3,800 ft³/min @ 1/2 in. H₂O
    4,500 ft³/min @ 0 in. H₂O    		76 dB @ 5 ft.Direct1,175Variable1 1/266 1/8"37 1/2"350SteelAluminum
    		Grease PanUL 705, UL 762, ULC-S645ETL Listed
    		4706N1400000000
    21"5,000 ft³/min @ 1/2 in. H₂O
    5,500 ft³/min @ 0 in. H₂O    		77 dB @ 5 ft.Direct1,275Variable371 7/8"38 1/4"350SteelAluminum
    		Grease PanUL 705, UL 762, ULC-S645ETL Listed
    		4706N1500000000
    25"5,500 ft³/min @ 1/2 in. H₂O
    6,500 ft³/min @ 0 in. H₂O    		72 dB @ 5 ft.Direct900Variable380 3/8"49 1/4"350SteelSteelGrease PanUL 705, UL 762, ULC-S645ETL Listed
    		4706N1600000000
    31"7,000 ft³/min @ 1/2 in. H₂O
    8,500 ft³/min @ 0 in. H₂O    		72 dB @ 5 ft.Direct675Variable585 7/8"52 1/4"350SteelSteelGrease PanUL 705, UL 762, ULC-S645ETL Listed
    		4706N1700000000
    37"12,000 ft³/min @ 1/2 in. H₂O
    14,000 ft³/min @ 0 in. H₂O    		72 dB @ 5 ft.Direct575Variable7 1/293 1/4"59"350SteelSteelGrease PanUL 705, UL 762, ULC-S645ETL Listed
    		4706N1800000000

    Inline Flue-Gas Exhausters

    Image of Product. Front orientation. Flue-Gas Exhausters. Inline Flue-Gas Exhausters.
    Increase airflow through exhaust duct to improve furnace performance. Create a cutout in your duct, insert the blower wheel, and mount the housing to the duct. All have an open dripproof motor enclosure for relatively clean, dry, indoor locations. They cannot be used for sidewall venting applications.
    For
    Cutout
    For Duct
    Diameter
    Ht.
    Wd.
    Motor Speed,
    rpm
    Max. Temp.,
    ° F
    Housing
    Material
    Mounting Fasteners
    Included
    Each
    120V AC—Hardwire
    3" to 6"2 5/8"7 5/8"1,550575SteelYes1902K110000000
    5" to 8"3 1/8"8 5/8"1,550575SteelYes1902K14000000
    8" to 12"4"12 3/4"1,725575SteelYes1902K27000000
     
    Pressure Switches
    Optional pressure switch (sold separately) prevents furnace from firing if exhausters fail.
    Housing
    Finish
    Housing
    Material
    Mounting Fasteners
    Included
    Each
    Zinc PlatedSteelYes1902K510000000

    Wall-Mount Fume Exhausters

    Image of Product. Front orientation. Fume Exhausters. Wall-Mount Fume Exhausters.
    Remove fumes, vapors, and fine dust particles from your space. This exhauster is commonly used in welding, soldering, and other operations that create fumes.
    Open Dripproof (ODP) Motor Enclosure—Use open dripproof exhausters in relatively clean, dry, well-ventilated indoor locations.
    Airflow @ Static Pressure—Airflow depends on the resistance created by ductwork. This resistance, known as static pressure (SP), is measured in inches of water.
    Overall
    Mounting
    Airflow @ SP
    Volume (Sound)
    @ Distance
    Power,
    hp
    Inlet
    Dia.
    Outlet
    Dia.
    Ht.
    Wd.
    Dp.
    Housing
    Material
    Base
    Material
    Wheel
    Material
    Fasteners
    Included
    For Screw
    Size
    Hole
    Dia.
    No. of
    Holes
    Each
    Open Dripproof (ODP) Motor Enclosure
     
    120V AC—Hardwire
    300 ft³/min @ 1/2 in. H₂O61 dBC @ 15 ft.1/44"4"16"16"8 7/8"Galvanized SteelSteelSteelNo1/4"
    		9/32"41951K30000000
     

    Wall-Vent Flue-Gas Exhausters

    Image of Product. Front orientation. Flue-Gas Exhausters. Wall-Vent Flue-Gas Exhausters.
    Often used for electric-to-gas conversions and renovations, these exhausters allow gas- or oil-fired equipment to be vented through a sidewall rather than a chimney. A thermostat signal starts the exhauster and a sensor ensures proper draft prior to operation. Exhausters have an open dripproof motor enclosure for relatively clean, dry, indoor locations. Use a reducer to vent through ducts with diameters up to 2" wider than the exhauster.
    Flue-Gas Exhauster Hoods—A flue-gas exhauster hood (sold separately) is required for the exterior of the sidewall.
    Flue-Gas Exhausters
    Flue-Gas
    Exhauster Hoods
    For Furnace Heating
    Cap., BTU/hr
    For Duct
    Diameter
    Motor Speed,
    rpm
    Max. Temp.,
    ° F
    Housing
    Material
    Mounting Fasteners
    Included
    Each
    Each
    24V AC/120V AC—Hardwire
    150,000 to 300,0004"3,000600SteelYes3972K400000003972K130000000
    300,000 to 600,0006"3,000600SteelYes3972K70000003972K18000000
     

    Blowers

    These blowers install in ductwork similar to duct fans, but are for use where high static pressures are present. Use them for equipment cooling, material conveying, drying, ventilating, and exhausting. All blowers have an open dripproof motor enclosure for relatively clean, dry, indoor locations.
    Note: Airflow depends on the resistance created by ductwork. This resistance, known as static pressure (SP), is measured in inches of water.
    With Rectangular Outlet and Round Inlet—Open Dripproof (ODP) Motor Enclosure
    Image of Product. Front orientation. Blowers. Blowers.
    Blowers
    Replacement
    Wheels
    Outlet
    Overall
    Mounting
    Airflow @ SP
    Volume (Sound)
    @ Distance
    Motor Speed,
    rpm
    Power,
    hp
    Ht.
    Wd.
    Inlet
    Dia.
    Wheel
    Dia.
    Ht.
    Wd.
    Dp.
    Wt.,
    lb.
    Current
    Temp. Range,
    ° F
    Housing
    Material
    Fasteners
    Included
    Hole
    Dia.
    Each
    Each
    120V AC
     
    Single Phase—Hardwire
    305 ft³/min @ 3/4 in. H₂O
    520 ft³/min @ 1/4 in. H₂O    		48 dB @ 15 ft.1,7251/47 1/4"4 1/4"6"6"14"10 1/4"13 3/4"282.6 amp/1.3 amp-4 to 180SteelNo3/8"1963K1310000000001963K5110000000
     
    120V AC/230V AC
     
    Single Phase—Hardwire
    860 ft³/min @ 3/4 in. H₂O
    1,130 ft³/min @ 1/4 in. H₂O    		52 dB @ 15 ft.1,2001/310 7/8"6 1/4"9"9"17 3/4"15 1/8"15 3/4"548.6 amp/4.3 amp-4 to 180SteelNo3/8"1963K136000000001963K544000000
    870 ft³/min @ 3/4 in. H₂O
    1,055 ft³/min @ 1/4 in. H₂O    		53 dB @ 15 ft.1,7251/38 3/8"5 1/2"8"7 1/2"15 5/8"13 1/2"15"446 amp/3 amp-4 to 180SteelNo3/8"1963K132000000001963K522000000
    1,505 ft³/min @ 3/4 in. H₂O
    1,875 ft³/min @ 1/4 in. H₂O    		58 dB @ 15 ft.1,2003/411 3/4"7 1/8"10"10"19 3/4"17 1/2"20 1/8"846.3 amp/3.5 amp-4 to 180SteelNo3/8"1963K137000000001963K533000000
     
    230V AC/460V AC
     
    Three Phase—Hardwire
    305 ft³/min @ 3/4 in. H₂O
    520 ft³/min @ 1/4 in. H₂O    		48 dB @ 15 ft.1,7251/47 1/4"4 1/4"6"6"14"10 1/4"13 3/4"341 amp/0.5 amp-4 to 180SteelNo3/8"1963K133000000001963K512000000
    860 ft³/min @ 3/4 in. H₂O
    1,130 ft³/min @ 1/4 in. H₂O    		51 dB @ 15 ft.1,2001/310 7/8"6 1/4"9"9"17 3/4"15 1/8"15 3/4"491.9 amp/0.9 amp-4 to 180SteelNo3/8"1963K138000000001963K545000000
    870 ft³/min @ 3/4 in. H₂O
    1,055 ft³/min @ 1/4 in. H₂O    		52 dB @ 15 ft.1,7251/38 3/8"5 1/2"8"7 1/2"15 5/8"13 1/2"15"371.4 amp/0.7 amp-4 to 180SteelNo3/8"1963K134000000001963K524000000
    1,505 ft³/min @ 3/4 in. H₂O
    1,875 ft³/min @ 1/4 in. H₂O    		57 dB @ 15 ft.1,2003/411 3/4"7 1/8"10"10"19 3/4"17 1/2"20 1/8"673.1 amp/1.55 amp-4 to 180SteelNo3/8"1963K135000000001963K534000000
     

    Enclosure-Cooling Blowers

    Image of Product. Front orientation. Blowers. Enclosure-Cooling Blowers, Round, 60 ft³/min Airflow.

    Round

    60 ft³/min Airflow

    Create a more concentrated stream of air than enclosure-cooling fans to cool equipment faster. To save space inside enclosures, these blowers can mount outside. They draw cooler outside air into your enclosure or exhaust hot air through a louvered outlet vent. Incoming air is filtered to keep out dust and contaminants.
    60 ft³/min Airflow—60 cfm blowers have an open dripproof motor enclosure for relatively clean, dry, indoor locations.
    Replacement Filters—Replacement filters are sold separately.
    Blowers
    Replacement
    Prefilters
    Replacement
    Filters
    Overall
    Ht.
    Wd.
    Dp.
    Outlet
    Dia.
    Airflow,
    ft³/min
    Motor Speed,
    rpm
    Current,
    amp
    Each
    Each
    Each
    Round
     
    120V AC, Single Phase, 60 Hz—Wire Leads
    10 1/2"6 1/2"6 1/2"4"603,2000.51730K1100000001730K210000001730K220000000
     

    High-Output Blowers

    Powerful and durable, these blowers are able to blow air through larger systems that have more airflow resistance than standard blowers can handle. They install in ductwork similar to duct fans, but are for use where high static pressures are present. Use them for equipment cooling, drying, ventilating, and exhausting. Blowers that weigh 280 lbs. or less can also be used for material conveying.
    Note: Airflow depends on the resistance created by ductwork. This resistance, known as static pressure (SP), is measured in inches of water. It is the responsibility of users in California to follow local energy efficiency regulations. Operating these blowers at a high airflow may violate these regulations.
    With Rectangular Outlet and Round Inlet—Open Dripproof (ODP) Motor Enclosure
    Image of Product. Front orientation. Blowers. High-Output Blowers, Rectangular Outlet.
    Blowers with an open dripproof motor enclosure are for relatively clean, dry, indoor locations.
    Blowers
    Replacement
    Wheels
    Outlet
    Overall
    Mounting
    Airflow @ SP
    Volume (Sound)
    @ Distance
    Motor Speed,
    rpm
    Power,
    hp
    Ht.
    Wd.
    Inlet
    Dia.
    Wheel
    Dia.
    Ht.
    Wd.
    Dp.
    Wt.,
    lb.
    Current
    Temp. Range,
    ° F
    Housing
    Material
    Fasteners
    Included
    Hole
    Dia.
    Each
    Each
    120V AC/230V AC
     
    Single Phase—Hardwire
    195 ft³/min @ 5 1/4 in. H₂O
    345 ft³/min @ 4 1/4 in. H₂O    		65 dBA @ 15 ft.3,4503/45 5/8"3 5/8"6"9"17 3/4"15 3/8"14 5/8"369.4 amp/4.7 amp-15 to 180SteelNo1/2"1953K1310000000001953K9160000000
    505 ft³/min @ 4 1/2 in. H₂O
    635 ft³/min @ 3 1/4 in. H₂O    		74 dBA @ 15 ft.3,4501 1/25 5/8"3 5/8"6"10"17 3/4"15 3/8"14 5/8"5917.8 amp/8.9 amp-15 to 180SteelNo1/2"1953K132000000001953K922000000
     
    230V AC/460V AC
     
    Three Phase—Hardwire
    1,600 ft³/min @ 4 1/4 in. H₂O
    1,800 ft³/min @ 3 1/4 in. H₂O    		73 dBA @ 15 ft.3,45057"5 5/8"8"12"22 1/4"20 9/16"17 5/8"19712.6 amp/6.32 amp-15 to 180SteelNo1/2"1953K133000000001953K933000000
     
    back to top