The insulation resists water, oil, and chemicals, so these cords withstand dirty and greasy environments.

Run these cords through high-traffic areas that are dirty and greasy. They have a thick insulation that resists water, oil, and chemicals, and protects against abrasion.

Use these cords where ignitable gas and dust may be present. They're CSA certified for Class I, Divisions 1 and 2, Groups B, C, and D; and Class II, Divisions 1 and 2, Groups F and G hazardous environments.

Designed for indoor use, these cords are often used to power appliances.

Thick insulation protects the internal wires of these cords, so they can be used in high-traffic areas and over rough surfaces.

Keep personnel safe from electric shock with these cords.

A locking lever on the female socket prevents your device from disconnecting.

Change the connection style between an outlet and your equipment.

These cords have an oil- and water-resistant insulation and impact-resistant connectors for protection in harsh environments.

Give the connectors on these cords a quarter turn to lock in place.

Cover mated connectors on extension cords to prevent disconnection.

Hardwire one of these converters to an extension cord to keep personnel safe from electric shock.

Designed for indoor applications, these cords are often used to power appliances.

Also known as hospital-grade cords, these cords have an extra-tight connection to prevent them from detaching. The plug is marked with a green dot.

After a power failure, these cords must be manually reset, preventing unexpected equipment startup.

Also known as hospital-grade cords, these cords have an extra-tight connection to prevent them from detaching. The plug is marked with a green dot.

Create a vibration-resistant connection—the socket on these cords securely locks onto any male receptacle and will not detach until manually unlocked.

Power multiple devices from one power source.

Plug these cords into fans that have quick-disconnect terminals.

Hardwire these cords to equipment.

The threaded ends on these cords seal out contaminants and resist coming loose from vibration in tough industrial environments and automated systems while sending power and signal to devices with M12 connections.

TPE insulation protects these cords from some of the toughest industrial conditions, including abrasion, coolants, chemicals, UV rays, and weld slag. Use them in areas with welding, machining, and fluctuating temperatures to send signal and power to M12 proximity switches, valves, and other devices.

With a single cord, these splitters join two devices with M12 connectors to a distribution block or I/O module with M12 connectors. Often used with sensors and actuators, they send signals/power to your devices through one connection.

With a higher maximum current than nano M8 and micro M12 cords, these mini cords are often used with automated systems, motors, and pumps.

Also known as pico cords, these cords are often used with low-current 8 mm proximity and photoelectric switches.

Send signal and power to low-current devices with M8 connections near welding, metal machining, and in spots where temperatures change.

Carry DC power in or out of electronic devices with these cords. All have industry standard barrel-style connections, letting you power electronics from power supplies.

Often used in automation systems such as conveyors and sorters, these cords have plug and socket ends, so they quickly connect and disconnect for maintenance and do not need to be hardwired.

A few turns is all it takes to join these cords, which have thick threads similar to a light bulb, for a secure connection in washdown and high-vibration areas. They detach just as fast for frequent maintenance.

Use these cords with hydraulic and air-powered valves, motors, pumps, and pressure switches. They have a solenoid valve socket on one end and an M12 threaded plug on the other.

Use these cords in vehicles and other agricultural and construction equipment.

Save energy by automatically turning off unused outlets. The master outlet controls five outlets and shuts off power to the other outlets when a device plugged into the master is turned off.

The power switch to these outlet strips is on a 44" long cord, so you can control power even when the strips are in hard to reach places, such as under a desk.

Keep personnel safe from electric shock with ground fault protection.

Also known as hospital-grade outlet strips, these outlets have an extra-tight fit to prevent plugs from detaching. They are marked with a green dot.

Connect multiple devices from a single outlet.

These curved outlet strips clamp onto a pole or table leg.

Create a permanent outlet system without opening walls. These outlet strips mount to a wall with clips and hardwire to an existing electrical system.

Install these extra-long strips onto the frame of an electrical cabinet.

Made of impact-resistant plastic, these reels are more durable than other automatic-wind cord reels.

Connect the wires in your power cord to these reels for a permanent and protected connection—the screw terminals are in a gasketed dust- and water-resistant NEMA 4 enclosure.

Use these cord reels where ignitable gas and dust may be present. They're rated NEMA 4 and UL listed for Class I, Divisions 1 and 2, Groups C and D; and Class II, Divisions 1 and 2, Groups F and G hazardous environments.

A steel stand makes these reels more rugged than light duty cord reels.

Plug a cord into these reels.

Store and transport cords.

The shielding blocks signal interference from nearby equipment and devices.

Often used in labs, storage facilities, and offices, the shielding blocks low to moderate signal interference from nearby equipment and devices. These cords have a flange on the socket end to mount them in a panel cutout.

The M12 threaded connectors on these cords are more vibration resistant than RJ45 connectors.

The plugs on these cords pivot up to 90° in each direction to fit Ethernet jacks at awkward angles or in tight spots, such as behind equipment or in enclosures.

These cords contain a single pair of twisted wires, making them lighter and more flexible than other Ethernet cords. They’re good for transportation, robotics, and automation applications.

Often used to connect multiple monitors to a single computer, these cords send video and audio to a display device.

Power up mobile devices and other electronics.

Often used in automated applications such as robotics, these cords withstand continuous motion without degrading data transmission.

Attach these caps to the socket end of washdown USB cords to maintain an IP67 rating when cords are not in use.

The insulation serves as a tough armor that protects these cords in high-traffic areas.

No drilling or fasteners needed—a screw-in cover plate makes it easy to mount these chargers for powering up phones, tablets, speakers, cameras, and other small devices.

Replace the cords connecting your robot controller and teach pendant when they become worn, or switch them out for a different length.

Display video from one source on two different monitors.

Send high-definition signals to monitors, TVs, and projectors.

Often used in automated applications such as robotics, these cords withstand continuous motion without degrading data transmission.

Play audio from one source on two different speakers.

Use these cords to extend the distance between your FANUC CRX robot arm and your controller.

Connect computers, servers, and switches in a fiber-optic network.

Power devices that have a straight-blade connection from a vehicle outlet.

Use foreign devices in American outlets and American devices in foreign outlets.

Use these connectors in general purpose residential and commercial applications.

Access the wire connection by opening the hinged housing. These connectors have screw terminals to create a secure connection; wire must be stripped before winding around the screw terminal.

Protect computers and other sensitive equipment from electromagnetic interference (EMI). Also known as isolated ground receptacles.

Check the status of a ground connection—a green light signals that connectors have power and are safely grounded.

When mated, connectors meet NEMA 6P, NEMA 12, and either IP67 or IP69K.

Eliminate the need for wire stripping; snap-on terminals pierce the wire insulation. When mated with a receptacle, these plugs have an extra-tight fit to withstand high vibration. Also known as hospital grade plugs.

Add a fuse to protect equipment from current overload. When mated with a receptacle, these plugs have an extra-tight fit to remain secure in high vibration environments. They're also known as hospital grade plugs.

A rubber housing protects these connectors from damage caused by drops and impact.

Rated NEMA 6P and 13, IP66, and IP69K when mated, connectors withstand oil/coolant spraying, high-pressure, high-temperature washdowns, and are corrosion resistant so they can be used in marine environments.