Use these cords with computers, lab equipment, and office machines that have IEC connections.

Use SJT cords in dry or damp environments.

The threaded ends on these cords seal out contaminants and resist coming loose from vibration in tough industrial environments and automated systems while sending power and signal to devices with M12 connections. Poles and keyways on the connector face adhere to standard coding layouts, reducing the chance of mismatching connections during setup.

A-coded cords work with AC and DC sensors, actuators, motors, light curtains, and other devices. They’re also often used to connect equipment to IO Link controllers and within Profibus, DeviceNet, and other fieldbus systems.

Cords with PVC insulation work well in general purpose applications, but they shouldn’t be used outdoors. While flexible, these cords aren’t as flexible as cords with polyurethane or TPE insulation, making them best for stationary jobs.

Use unshielded cords in applications where signal interference isn’t a concern.

Cords with a 90° elbow run along the side of equipment, so they fit behind machines and in tight spaces.

When mated, the connectors are IP rated to block out dust and water if briefly submersed. IP66K rated connectors can be sprayed down during high-pressure washdowns.

Add caps to protect connectors and maintain their IP ratings when not in use.

For technical drawings and 3-D models, click on a part number.

With a higher maximum current than nano M8 and micro M12 cords, these mini cords are often used with automated systems, motors, and pumps. A threaded housing securely mates with other mini connections and won’t shake loose from vibration. They have a standard pole layout and housing thread size to reduce the chance you’ll mis-mate connectors. These cords are unshielded, so they’re best for use where signal interference is not a concern.

When mated, these cords meet IP ratings for protection from dust and temporary submersion.

Thread adapters connect plugs and sockets that both have internal threads.

Caps protect connectors and maintain their IP ratings when not in use.

For technical drawings and 3-D models, click on a part number.

Also known as pico cords, these cords are often used with low-current 8 mm proximity and photoelectric switches.

Cords with polyurethane insulation bend easily, so they are ideal for applications that require continuous flexibility such as robotics. They also resist oil.

Cords with 90° elbow plugs and sockets fit flush against equipment, so they fit in tight spaces.

All are rated IP67 for protection from dust and temporary submersion. Cords rated IP66K also protect against washdowns.

For technical drawings and 3-D models, click on a part number.

Use these cords with hydraulic and air-powered valves, motors, pumps, and pressure switches. They have a solenoid valve socket on one end and an M12 threaded plug on the other. The ground connection is not included in the number of poles. A power-indicating light on the socket illuminates when the cord has power. All are IP-rated for protection from washdowns and temporary submersion.

For technical drawings and 3-D models, click on a part number.

Transfer power between your door frame and door to power electric locks or exit devices. These cords mount on the surface of the door, rather than inside the frame, so they’re easier to install than other power transfer devices such as hinges and mortises. A stainless steel armor protects the wire leads and prevents tampering with your lock. Wire leads are included, so they come ready to hardwire into your system. Cords meet UL 10C to prevent the spread of fire through doors and door frames.

Choose a cord based on your door's opening direction. For doors that open outward, the cord is longer to accommodate the extra distance the door moves as it swings away from the frame.

The plugs on these cords pivot up to 90° in each direction to fit Ethernet jacks at awkward angles or in tight spots, such as behind equipment or in enclosures. Simply slide back the bend protection and turn the plugs to adjust their angle. Use these cords to send data between computers, printers, servers, and switches. All have braid and foil shielding to block signal interference from nearby equipment and devices. They come in a variety of colors to organize connections by application or the machines they are used on.

For technical drawings and 3-D models, click on a part number.

Often used in labs, storage facilities, and offices, the shielding blocks low to moderate signal interference from nearby equipment and devices. These cords have a flange on the socket end to mount them in a panel cutout. They send data between computers, printers, servers, and switches. For faster data transmission speeds, choose a cord with a higher ethernet cable category. All are backward compatible, so they work in networks that meet the same or a lower category.

Screw-in cords simply thread into panel cutouts. Use them on panels that are 1.5 mm to 5 mm thick.

Add an optional cap to protect the end of screw-in cords when not in use. Hinged caps open and shut quickly at a fixed angle, so they’re more convenient for frequent access than tethered caps. Tethered caps can open in any direction, letting you access the end of the cord from any angle.

Label holders (sold separately) snap onto the end of the cords.

For technical drawings and 3-D models, click on a part number.

Send high-speed data between sensors, switches, or I/O modules with an M8 connection and programmable logic controllers (PLCs) and computers with a traditional RJ45 connection. Braided and foil shielding blocks signal interference from nearby equipment. And with a polyurethane insulation that bends easily, these cords are ideal for applications that continuously flex such as robotics. They also resist oil. The M8 end is rated IP67 when mated, so it keeps out dust and water from temporary submersion.

For technical drawings and 3-D models, click on a part number.

Connect devices such as computers, printers, and mobile devices. The higher the USB standard, the faster cords can transmit data. These cords are backward compatible, so they work with cords and connectors that meet the same or lower USB standard.

90° elbow cords fit flush against equipment so they fit in tight spaces.

Double-shielded cords have a metal braid and foil insulation, so they reduce signal interference from nearby equipment and devices.

With Kevlar-reinforced armor, these USB cords stand up to frequent use and bending better than standard USB cords. Use them to move data between computers, printers, and mobile devices in places where cords may be dropped, pulled, and bent in odd directions. These cords also have a long, flexible strain relief for extra durability where the cable meets the connector. Cords with a higher USB standard transmit data faster than cords with a lower USB standard. Backward compatible, all work with cords and connectors that meet the same or a lower USB standard.

Rated IP67, these cords withstand wet and dusty locations, such as enclosures on CNC machines. These cords have braided and foil shielding, so they reduce signal interference from nearby equipment and devices. All are backward compatible, so they work with cords and connectors that meet the same or lower USB standard.

Cords with a socket mount onto a panel.

Caps (sold separately) maintain the IP rating when not in use.

For technical drawings and 3-D models, click on a part number.

Pinch the sides on the USB type A plugs to insert them; they lock in place to prevent the cord from detaching. These cords have braided and foil shielding, which reduces signal interference from nearby equipment and devices. They are backward compatible, so they work with cords and connectors that meet the same or lower USB standard.

A plug × A plug cords lock on both ends.

A plug × B plug cords lock only on the type A plug end.

For technical drawings and 3-D models, click on a part number.

With a flange on the socket end, you can mount these cords in a panel cutout to move data between computers, printers, and mobile devices. Backward compatible, all work with cords and connectors that meet the same or lower USB standard.

Shielded and double-shielded cords have insulation that reduces interference from nearby equipment and devices.

Cords with an external housing thread screw into your panel and don’t require fasteners. Because they mount nearly flush with your panel, they protect the connector from damage and won’t snag on equipment and other cords.

Add a cap to protect the end mounted in a panel when it’s not in use. Hinged caps open and shut quickly at a fixed angle, so they’re more convenient for frequent access than tethered caps. Tethered caps can open in any direction, letting you access adapters from any angle. IP40-rated caps have a locking mechanism for extra security.

Label holders snap onto the end mounted in a panel.

For technical drawings and 3-D models, click on a part number.