Create a vibration-resistant connection—the socket on these cords securely locks onto any male receptacle and will not detach until manually unlocked. They also have a 90° elbow plug that fits flush against a wall outlet, so they fit behind machinery and in other areas where space is tight. Use them with computers, lab equipment, and office machines that have IEC connections.

The shielding blocks signal interference from nearby equipment and devices. Use these cords with computers, lab equipment, and office machines that have IEC connections.

SVT cords are ultra-flexible and as pliable as vacuum cleaner cords. They withstand repeated winding.

Use SJT cords in dry or damp locations.

Create a vibration-resistant connection—the socket on these cords securely locks onto any male receptacle and will not detach until manually unlocked. Use them with computers, lab equipment, and office machines that have IEC connections.

The threaded ends on these cords seal out contaminants and resist coming loose from vibration in tough industrial environments and automated systems while sending power and signal to devices with M12 connections. Poles and keyways on the connector face adhere to standard coding layouts, reducing the chance of mismatching connections during setup.

A-coded cords work with AC and DC sensors, actuators, motors, light curtains, and other devices. They’re also often used to connect equipment to IO Link controllers and within Profibus, DeviceNet, and other fieldbus systems.

Cords with PVC insulation work well in general purpose applications, but they shouldn’t be used outdoors. While flexible, these cords aren’t as flexible as cords with polyurethane or TPE insulation, making them best for stationary jobs. Cords with polyurethane or TPE insulation resist chemicals and sunlight, so you can use them outdoors. Because they stand up to bending, they’re good for jobs with continuous motion, such as robotics. Polyurethane also resists oil and is halogen free, which can corrode metal and is dangerous to inhale.

Use unshielded cords in applications where signal interference isn’t a concern. Double-shielded cords have layers of braid and foil that block signal interference from nearby devices, reducing the chance of signal loss between equipment.

Cords with a 90° elbow run along the side of equipment, so they fit behind machines and in tight spaces.

When mated, the connectors are IP rated to block out dust and water if briefly submersed. IP66K rated connectors can be sprayed down during high-pressure washdowns.

Add caps to protect connectors and maintain their IP ratings when not in use.

TPE insulation protects these cords from some of the toughest industrial conditions, including abrasion, coolants, chemicals, UV rays, and weld slag. Use them in areas with welding, machining, and fluctuating temperatures to send signal and power to M12 proximity switches, valves, and other devices. These cords are flexible and have threaded ends for a secure connection that withstands the movement and vibration of automated lines and robotics. When mated, they’re NEMA or IP rated to seal out dust and water from washdowns. Standardized pole and keyway coding layouts prevent accidental mis-mating during setup.

Cords with silicone outer insulation give you an extra layer of protection from weld slag and chemicals compared to TPE alone. They're useful in areas where frequent hot liquid splatter might burn through your cord. However, this additional layer makes them less flexible than plain TPE cords.

A-coded cords work with both AC and DC devices. They’re also often used to connect equipment to IO Link controllers and in Profibus, DeviceNet, and other fieldbus systems.

An IP69 rating means they seal out high-pressure, high-temperature washdowns.

Add caps to protect connectors and maintain their NEMA or IP ratings when not in use.

For technical drawings and 3-D models, click on a part number.

Step on or roll carts and platform trucks over these M12 cords without crushing them. A protective layer of stainless steel makes these the most crush- and abrasion-resistant M12 cords we offer. It also prevents damage from pests that chew through cords. The stainless steel and PVC outer layer keep moisture from corroding the cord, so they can be used outdoors and near chemicals as well. Despite the stainless steel covering, these cords are still flexible enough to route around equipment. Threaded ends create a tight connection that seals out contaminants and won’t shake loose from the vibration of automated machines.

These cords have a standardized code layout to reduce the chances of accidentally mis-mating them. All are A-coded to send signal and power to AC and DC devices. A-coded cords are often used with sensors, actuators, and motors in automated systems. They also connect devices to IO Link controllers and within fieldbus systems, such as Profibus and DeviceNet.

When mated or capped, these cords meet IP ratings. IP67 cords withstand temporary submersion. IP69 cords are protected from dust and high-pressure, high-temperature washdowns.

Add caps to protect connectors and maintain their IP ratings when not in use.

Note: Sockets may have extra holes on the face that are not used.

For technical drawings and 3-D models, click on a part number.

With a higher maximum current than nano M8 and micro M12 cords, these mini cords are often used with automated systems, motors, and pumps. A threaded housing securely mates with other mini connections and won’t shake loose from vibration. They have a standard pole layout and housing thread size to reduce the chance you’ll mis-mate connectors. These cords are unshielded, so they’re best for use where signal interference is not a concern.

When mated, these cords meet IP ratings for protection from dust and temporary submersion.

Thread adapters connect plugs and sockets that both have internal threads.

Caps protect connectors and maintain their IP ratings when not in use.

For technical drawings and 3-D models, click on a part number.

Also known as pico cords, these cords are often used with low-current 8 mm proximity and photoelectric switches.

Cords with polyurethane insulation bend easily, so they are ideal for applications that require continuous flexibility such as robotics. They also resist oil.

Cords with 90° elbow plugs and sockets fit flush against equipment, so they fit in tight spaces.

All are rated IP67 for protection from dust and temporary submersion. Cords rated IP66K also protect against washdowns.

For technical drawings and 3-D models, click on a part number.

Send signal and power to low-current devices with M8 connections near welding, metal machining, and in spots where temperatures change. These cords stand up to chemicals, oil, weld slag, and other tough industrial stresses thanks to a layer of TPE. They’re flame rated FT4, so they meet requirements for preventing the spread of flames. Also known as pico cords, M8 cords are often used with 8 mm and smaller proximity switches and photoelectric switches. These cords are good for robotics and other jobs with continuous motion because TPE bends easily.

All are rated IP66K and IP67 when mated for protection against dust, temporary submersion, and high-pressure washdowns. UL and C-UL listed, they meet American and Canadian safety standards.

For technical drawings and 3-D models, click on a part number.

These cords have an M8 connector on one end and an M12 connector on the other. With polyurethane insulation, they bend easily, so they are ideal for applications that require continuous flexibility such as robotics. They also resist oil. They’re rated IP65, IP68 and IP69K for protection from temporary submersion and high-pressure, high-temperature washdowns.

For technical drawings and 3-D models, click on a part number.

Often used in automation systems such as conveyors and sorters, these cords have plug and socket ends, so they quickly connect and disconnect for maintenance and do not need to be hardwired. Because these cords carry higher currents than micro and mini cords, they can power equipment such as motors, fans, pumps, and automated machine tools. They are shielded to block out interference from nearby equipment. These cords meet UL 2237 and UL 2238, so they can be used in motor branch circuits of industrial machinery. They also meet TC-ER crush and impact requirements for exposed runs in cable carriers. IP rated, they protect against dust, washdowns, and temporary submersion.

Connect these cords to control cabinets and equipment with M29 power receptacles (sold separately).

For technical drawings and 3-D models, click on a part number.

Like a tree trunk connecting to branches, these cords supply power to a chain of devices. Send power to high-amperage motors, robotic arms, and other machines in motor controls, conveyors, and sorting and packaging systems. All quickly connect and disconnect for easy installation and maintenance.

UL and C-UL listed, these cords meet American and Canadian safety standards. They comply with TC-ER requirements, so they withstand being hit and crushed when exposed. Their inner and outer insulation resist oil and water as well, thanks to their STOOW rating. IP and NEMA rated when connected, these cords resist corrosion and seal out dust and water from weather and washdowns. You can even safely submerse them for brief periods of time.

Attach M35 connectors or M22 cords and connectors to extend your power line and reach more devices in your system. Connecting tees link multiple pieces of equipment with M35 connections. Reducing tees join equipment with M35 connections to equipment with M22 connections.

Add a cap to protect these cords from dust when they’re not in use.

Optional locking clips stop your cord from coming loose when powering equipment that carries high amperage.

For technical drawings and 3-D models, click on a part number.

Use these cords with hydraulic and air-powered valves, motors, pumps, and pressure switches. They have a solenoid valve socket on one end and an M12 threaded plug on the other. The ground connection is not included in the number of poles. A power-indicating light on the socket illuminates when the cord has power. All are IP-rated for protection from washdowns and temporary submersion.

For technical drawings and 3-D models, click on a part number.

A few turns is all it takes to join these cords, which have thick threads similar to a light bulb, for a secure connection in washdown and high-vibration areas. They detach just as fast for frequent maintenance. IP68 rated when mated, these cords block out dust and water if briefly submersed. They carry higher currents than mini cords, so they’re often used to power cameras, machine tools, HVAC equipment, and I/O modules, yet they’re compact to save space. Their housing resists UV rays for outdoor use. All have cables that are known as TC-ER, meaning they meet crush and impact requirements for exposed cable in cable carriers.

Connect these cords to mating quick-connect connectors.

Add caps to keep out dust and debris when these cords aren’t connected.

For technical drawings and 3-D models, click on a part number.