Fast-Action Bar Clamps
The clamping arm slides freely along the bar for quick, one-handed positioning. Tighten the screw onto a workpiece and the arm locks in place. These clamps are also known as F- or L-clamps.
Opening | ||||||
|---|---|---|---|---|---|---|
| Max. | Min. | Reach | Holding Capacity, lbs. | Body Material | Each | |
| 4" | 0" | 2 1/4" | 400 | Zinc-Plated Steel | 0000000 | 000000 |
| 6" | 0" | 4 3/4" | 1,330 | Zinc-Plated Steel | 0000000 | 00000 |
| 8" | 0" | 5 1/2" | 2,660 | Zinc-Plated Steel | 0000000 | 00000 |
| 9" | 0" | 5 1/2" | 2,660 | Zinc-Plated Steel | 00000000 | 00000 |
| 10" | 0" | 4 3/4" | 1,000 | Zinc-Plated Steel | 00000000 | 00000 |
| 12" | 0" | 5 1/2" | 2,660 | Zinc-Plated Steel | 0000000 | 000000 |
| 12" | 0" | 8" | 1,700 | Zinc-Plated Steel | 0000000 | 000000 |
| 16" | 0" | 5 1/2" | 2,660 | Zinc-Plated Steel | 0000000 | 000000 |
| 18" | 0" | 4 3/4" | 1,980 | Zinc-Plated Steel | 00000000 | 000000 |
| 20" | 0" | 5 1/2" | 2,660 | Zinc-Plated Steel | 0000000 | 000000 |
| 24" | 0" | 5 1/2" | 2,660 | Zinc-Plated Steel | 0000000 | 000000 |
| 24" | 0" | 8" | 1,700 | Zinc-Plated Steel | 0000000 | 000000 |
| 36" | 0" | 5 1/2" | 2,800 | Zinc-Plated Steel | 0000000 | 000000 |
| 48" | 0" | 5 1/2" | 2,800 | Zinc-Plated Steel | 0000000 | 000000 |
| 60" | 0" | 5 1/2" | 2,800 | Zinc-Plated Steel | 0000000 | 000000 |
Heavy Duty Fast-Action Bar Clamps
These clamps have twice the capacity of standard fast-action bar clamps. The clamping arm slides freely along the bar for quick, one-handed positioning. Tighten the screw onto a workpiece and the arm locks in place. These are also known as F- or L-clamps.
Opening | |||||||
|---|---|---|---|---|---|---|---|
| Max. | Min. | Reach | Holding Capacity, lbs. | Body Material | Swivel Range of Motion | Each | |
| 12" | 0" | 7" | 4,880 | Zinc-Plated Steel | 20° | 0000000 | 0000000 |
| 12" | 0" | 7" | 4,880 | Zinc-Plated Steel | 35° | 0000000 | 000000 |
| 18" | 0" | 7" | 4,880 | Zinc-Plated Steel | 20° | 0000000 | 000000 |
| 18" | 0" | 7" | 4,880 | Zinc-Plated Steel | 35° | 0000000 | 000000 |
| 36" | 0" | 7" | 4,880 | Zinc-Plated Steel | 20° | 0000000 | 000000 |
| 36" | 0" | 7" | 4,880 | Zinc-Plated Steel | 35° | 0000000 | 000000 |
Extra Heavy Duty Fast-Action Bar Clamps
For the most demanding jobs, these clamps have almost five times the capacity of standard fast-action bar clamps. The clamping arm slides freely along the bar for quick, one-handed positioning. Tighten the screw onto a workpiece and the arm locks in place. These are also known as F- or L-clamps.
Vibration-Resistant Fast-Action Bar Clamps
Pull the handle to lock the jaw in place and prevent loosening caused by vibration. The clamping arm slides freely along the bar for quick, one-handed positioning. These clamps are also known as F- or L-clamps.
Bar Clamps
Pull the lever to slide the clamping arm along the bar; release to lock in place. Use the handle for final tightening.
Opening | ||||||
|---|---|---|---|---|---|---|
| Max. | Min. | Reach | Holding Capacity, lbs. | Body Material | Each | |
| 6" | 0" | 3" | 1,200 | Iron | 0000000 | 000000 |
| 12" | 0" | 3" | 1,000 | Steel | 0000000 | 00000 |
| 12" | 0" | 5" | 1,200 | Steel | 0000000 | 00000 |
| 18" | 0" | 3" | 1,000 | Steel | 0000000 | 00000 |
| 18" | 0" | 5" | 1,200 | Steel | 0000000 | 00000 |
| 24" | 0" | 3" | 1,000 | Steel | 0000000 | 00000 |
| 24" | 0" | 5" | 1,200 | Steel | 0000000 | 00000 |
| 30" | 0" | 3" | 1,000 | Steel | 0000000 | 00000 |
| 31 1/2" | 0" | 5 1/2" | 1,200 | Steel | 0000000 | 00000 |
| 36" | 0" | 3" | 1,000 | Steel | 0000000 | 00000 |
| 39 3/8" | 0" | 5 1/2" | 1,200 | Steel | 0000000 | 00000 |
| 59" | 0" | 5 1/2" | 1,200 | Steel | 0000000 | 00000 |
Heavy Duty Bar Clamps
Hold up to five times the capacity of standard bar clamps. Pull the lever to slide the clamping arm along the bar; release to lock in place. Use the handle for final tightening. These are also known as I-beam clamps.
Opening | ||||||
|---|---|---|---|---|---|---|
| Max. | Min. | Reach | Holding Capacity, lbs. | Body Material | Each | |
| 24" | 0" | 1 13/16" | 6,000 | Steel | 000000 | 000000 |
| 30" | 0" | 2" | 5,100 | Steel | 000000 | 00000 |
| 36" | 0" | 1 13/16" | 6,000 | Steel | 000000 | 00000 |
| 48" | 0" | 1 13/16" | 6,000 | Steel | 000000 | 00000 |
| 60" | 0" | 1 13/16" | 6,000 | Steel | 000000 | 000000 |
| 72" | 0" | 1 13/16" | 6,000 | Steel | 000000 | 000000 |
| 84" | 0" | 2" | 5,100 | Steel | 000000 | 00000 |
| 96" | 0" | 2" | 5,100 | Steel | 000000 | 000000 |
Trigger-Action Bar Clamps
Any-Length Bar Clamps
Place the arms on a pipe that is threaded at one end and at least 12" long to create your own bar clamp. Turn the handle to tighten. The clamping surfaces have removable plastic pads that prevent damage to material. These are also known as pipe clamps.
Tight-Clearance Any-Length Bar Clamps
All adjustments can be made from one end, allowing clamping in tight spaces. Place the arms on a pipe that is threaded at one end and at least 12" long to create your own bar clamp. The clamping surfaces have removable plastic pads that prevent damage to material. These are also known as pipe clamps.
Trigger-Action Bar Clamps/Spreaders
Reverse the arms to use these clamps as spreaders. Press the trigger to slide the clamping arm along the bar. Release the trigger and squeeze the pistol-grip handle to lock the clamp in place.
Opening | Spreader Opening | ||||||
|---|---|---|---|---|---|---|---|
| Max. | Min. | Max. | Min. | Reach | Body Material | Each | |
300 lbs. Holding Capacity | |||||||
| 6" | 0" | 12 1/2" | 7 1/2" | 2 1/4" | Steel | 0000000 | 000000 |
| 12" | 0" | 18 1/2" | 7 1/2" | 2 1/4" | Steel | 0000000 | 00000 |
| 18" | 0" | 24 1/2" | 7 1/2" | 2 1/4" | Steel | 00000000 | 00000 |
| 24" | 0" | 30 1/2" | 7 1/2" | 2 1/4" | Steel | 00000000 | 00000 |
| 36" | 0" | 42 1/2" | 7 1/2" | 2 1/4" | Steel | 00000000 | 00000 |
600 lbs. Holding Capacity | |||||||
| 6" | 0" | 14 7/8" | 9 1/4" | 3 5/8" | Steel | 00000000 | 00000 |
| 12" | 0" | 20 1/2" | 9" | 2 3/4" | Steel | 00000000 | 00000 |
| 18" | 0" | 26 1/2" | 9" | 2 3/4" | Steel | 00000000 | 00000 |
| 24" | 0" | 32 1/2" | 9" | 2 3/4" | Steel | 00000000 | 00000 |
| 36" | 0" | 44 1/2" | 9" | 2 3/4" | Steel | 00000000 | 00000 |
| 50" | 0" | 58 1/2" | 9" | 2 3/4" | Steel | 00000000 | 00000 |
Fast-Action Bar Clamps/Spreaders
Each arm slides freely for quick, one-handed positioning. They lock when the screws are tightened onto a workpiece. Reverse the arms to use these clamps as spreaders.
Parallel-Jaw Bar Clamps/Spreaders
The large, flat jaws remain parallel when clamping to apply even pressure without denting or marring the workpiece. Reverse the arms to use these clamps as spreaders. Pull the handle to lock or release the clamping arm.
Opening | Spreader Opening | |||||||
|---|---|---|---|---|---|---|---|---|
| Max. | Min. | Max. | Min. | Reach | Holding Capacity, lbs. | Body Material | Each | |
| 12" | 0" | 15 5/16" | 10 1/2" | 3 3/4" | 1,000 | Steel | 0000000 | 000000 |
| 18" | 0" | 21 1/2" | 10 1/2" | 3 3/4" | 1,000 | Steel | 0000000 | 00000 |
| 24" | 0" | 28 3/4" | 10 1/2" | 3 3/4" | 1,000 | Steel | 0000000 | 00000 |
| 40" | 0" | 44 1/2" | 10 1/2" | 3 3/4" | 1,000 | Steel | 0000000 | 00000 |
| 50" | 0" | 52 1/2" | 10 1/2" | 3 3/4" | 1,000 | Steel | 0000000 | 00000 |
Extended-Reach Bar Clamps
Clamp much farther in from the edge of the workpiece than with standard bar clamps. The clamping arm slides freely along the bar for quick, one-handed positioning. Use the handle for final tightening.
Bar Clamps for Round and Angled Material
The swivel pad pivots to grip nearly any shape of material. The clamping arm slides freely along the bar for quick, one-handed positioning. Use the handle for final tightening.
Opening | ||||||
|---|---|---|---|---|---|---|
| Max. | Min. | Reach | Holding Capacity, lbs. | Body Material | Each | |
| 12" | 0" | 5 1/2" | 2,645 | Steel | 000000 | 000000 |
Bar Clamps for Recessed Areas
Also known as J-clamps, these provide additional clearance to reach around obstructions and clamp workpieces in recessed areas. The clamping arm slides freely along the bar for quick, one-handed positioning. Use the handle for final tightening.
Drop-In Bar-Style Hold-Down Clamps for Workholding Tables
The base fits into holes on most workholding and welding tables for clamping anywhere on the work surface. The clamping arm slides freely along the bar for quick positioning. Use the handle for final tightening.
Bench-Mount Bar-Style Hold-Down Clamps
Permanently mount the base to the work surface and easily move the clamp on and off the surface. The clamping arm slides freely along the bar for quick positioning. Use the handle for final tightening. The copper-plated clamp components resist weld spatter.
Build-Your-Own Wood T-Slot Fixture Tables
Cut T-tracks into wood to create your own router jigs, assembly tables, and other woodworking fixtures. These kits come with a router bit to cut tracks and a setup gauge to ensure the bit cuts at the correct depth. They also come with clamps that are sized to fit the tracks. Cut tracks in the pattern you need, then slide the clamps into the tracks to hold workpieces.
Kits | ||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Router Bit | Fixture Clamp | Bar Clamp | Replacement Fixture Clamps | Replacement Bar Clamps | ||||||||||||||
| No. of Pieces | Includes | Shank Size | Material | Screw Lg. | Adjustment Type | Nut Material | Opening Range | Reach | Bar Material | Each | No. of Pieces | Screw Lg. | Each | Pkg. Qty. | Pkg. | |||
| 10 | 1 Dovetail Router Bit 1 Setup Gauge 6 Fixture Clamps for Dovetail Track 2 Bar Clamps for Dovetail Track | 1/2" | Carbide | 3/4", 1", 1 1/2" | Knob, Screw | Nylon Plastic | 0"-5 3/8" | 2 3/8" | Steel | 0000000 | 0000000 | 8 | 3/4", 1", 1 1/2", 2" | 0000000 | 000000 | 2 | 0000000 | 000000 |
Use pistol-grip bar clamps for delicate surfaces. They have a large clamp pad that won’t damage your workpiece. Slide the handle down the bar until it’s flush with your workpiece, then squeeze to lock it in place. Release these clamps with a trigger on the handle.
Ratcheting bar clamps are easy to position—pull the ratchet handle toward the bar to tighten against your workpiece, then press a button to release. A ratchet lock keeps them from loosening from vibration. A spring on the handle presses against the bar to keep it from sliding, even if it’s hanging upside down.
Attach clamp pads to the cap of bar clamps included in your kit for a better grip on workpieces. They have V-shaped grooves that apply pressure from two sides, so they can hug round workpieces or hold flat pieces at an angle.
| Material | Pkg. Qty. | Pkg. | |
Nylon Plastic | 4 | 0000000 | 000000 |