Mount these lights flush with ceilings in wet locations—all are sealed to keep out humidity and dripping, splashing, and falling liquids. Unlike recessed can lights, which require a separate housing, these fit directly into a cutout in your ceiling and are held in place by springs. With built-in LEDs, these lights last longer, are more efficient, and generate less heat than other light technologies. Use the switch on the power supply to choose between warm, cool, or neutral light—no more mismatched lights. All have passed strict U.S. and Canadian safety standards.

Expand the reach of emergency backup lights. These add-on heads are often used to extend emergency lighting into stairwells, exits, and other remote areas. They’re an economical alternative to buying an additional full-sized backup light. To power them, run low-voltage wiring right from your backup light. They are adjustable, so you can angle them to direct light where it’s needed.

Select a head that matches your backup light’s output voltage. To meet UL 924, don't exceed the maximum wattage of add-on heads listed for your light. This ensures you won’t push your light's run time below 90 minutes.

Heads for use in damp locations withstand humidity and moisture. Heads for use in wet locations are sealed to keep out humidity, rain, and snow. Heads for use in washdown meet NEMA 4X, which also certifies them as protected from corrosive liquids and dust.

Maximum distance between lights represents how far you can space out two lights without creating a dark zone.

When the power goes out, these lights turn on. They have adjustable heads that illuminate the path toward exits during outages. Rated UL 924, their battery provides at least 90 minutes of light. A low-voltage disconnect means the battery shuts off just before it’s fully drained, prolonging its overall lifespan. Lights cannot be sold to the listed areas due to energy efficiency regulations.

All have a manual-test switch that lets you verify the battery and heads are working. Lights with automatic battery testing run a self-check once a month. An indicator tells you if they need maintenance.

Style D-G lights are compatible with add-on heads. Run wiring between add-on heads and your backup light to extend lighting into stairwells, exits, and other remote areas. The greater the wattage of the add-on heads—and the more of them you use—the more they’ll reduce your light’s run time. Maximum wattage for add-on heads refers to the total wattage of add-ons you can use without pushing your light’s run time below 90 minutes.

Maximum distance between lights represents how far you can space out two lights without creating a dark zone.

No hardwiring required—these backup lights plug into a standard outlet. They kick on when the power goes out to light the path toward exits. Their battery generates at least 90 minutes of power in compliance with UL 924 standards for backup lights. A low-voltage disconnect extends the life of the battery by switching it off before it’s fully drained. Direct light where it’s needed by angling the adjustable heads.

All have a manual-test switch that lets you verify the battery and heads are working. Style A and B lights are compatible with add-on heads. Run wiring between add-on heads and your backup light to extend lighting into stairwells, exits, and other remote areas. The greater the wattage of the add-on heads—and the more of them you use—the more they’ll reduce your light’s run time. Maximum wattage for add-on heads refers to the total wattage of add-ons you can use without pushing your light’s run time below 90 minutes.

Maximum distance between lights represents how far you can space out two lights without creating a dark zone.

Installed in drop ceilings, these lights are often used in open workspaces where columns and walls are few and far between. Unlike traditional backup lights, they don’t require a vertical surface for mounting. When the power goes out, they kick on, lighting the path toward exits. Direct light where it’s needed by angling the adjustable heads. Their battery generates at least 90 minutes of power in compliance with UL 924 standards for backup lights. A low-voltage disconnect extends the life of the battery by switching it off before it’s fully drained.

Once a month, these lights automatically test that the battery and heads are working. An indicator tells you if they need maintenance. They also have a manual switch that lets you test them any time.

Wire these lights to add-on heads to extend lighting into stairwells, exits, and other remote areas. The greater the wattage of the add-on heads—and the more of them you use—the more they’ll reduce your light’s run time. Maximum wattage for add-on heads refers to the total wattage of add-ons you can use without pushing your light’s run time below 90 minutes.

Maximum distance between lights represents how far you can space out two lights without creating a dark zone.