Also known as aqua ammonia, these cleaners consist of a water-based 5% ammonium hydroxide solution.

Note: Not for use on metal surfaces.

These low-foaming cleaners won't damage your steam cleaner or pressure washer. Use them on hard, nonporous surfaces.

Multipurpose cleaners cut through dirt or grease and oil. They rinse clean without leaving a residue.

Multipurpose and disinfectant cleaners remove dirt and kill up to 99.9% of bacteria and viruses. Their no-rinse formula reduces cleaning time. NSF and EPA registered, they’re safe for disinfecting surfaces that will come in contact with food.

Cleaners that cannot be sold outside of the United States are restricted due to product registration requirements.

Remove dirt, dust, and disinfectant residue from surfaces in clean rooms, including walls, floors, and stainless steel countertops. These cleaners are packaged in a clean room, sterilized, double bagged, and marked with a lot number. Product regulations restrict sales to the listed areas.

Clean fingerprints, uncured epoxy residue, flux, and light oils off printed circuit boards and electronic connectors. These saturated wipes won’t leave behind residue.

Often used in freezers and cold-storage environments where other water-based cleaners would freeze, these cleaners remove dirt and grime in temperatures as low as -40° F. They also melt frost and ice as they clean. Unlike other low-temperature cleaners, they are free of flammable solvents, such as methanol. Use them with spray bottles, mops, and powered floor cleaners. After allowing the cleaning solution to soak, remove it with a cloth, sponge, mop, or wet/dry vacuum.

Note: Not for use on vinyl or rubber mats because the surface can become slippery.

For strong bonds, clean and degrease surfaces before applying adhesives. These cleaners are NSF registered K1 for use in non-food-processing areas within food-processing facilities.

Certificates with a traceable lot number and product shelf life are available for these products. Download certificates from ORDER HISTORY after your order ships.

Often used to prepare parts for painting or powder coating, these water-based cleaners remove dirt, grease, metal residue, and mold-release lubricants. You can also use them to clean stainless steel prior to passivation. Free of fragrances and dyes, they rinse clean without leaving a residue. They contain corrosion inhibitors for long-lasting surface protection. Clean parts by soaking, scrubbing, or using a pressure washer.

Remove oil- or solvent-based residue from metal, plastic, wood, carpet, upholstery, and painted surfaces.

Gels cling to vertical surfaces to remove residue more effectively than liquids.

Remove oil-based residue from hard surfaces, painted surfaces, vinyl, carpet, and fabric.

Remove silicone, foam sealants, caulk, wet or dry latex-based foams, and construction adhesives. Safe for use on plastics, fiberglass, and most metals. These removers cannot be sold to Canada due to local chemical regulations.

Less aggressive than our standard epoxy removers, these solvent-based wipes remove uncured epoxy adhesives and solder paste. They are often used to wipe excess epoxy and paste off printed circuit boards and other electronic components.

These clinging gels eliminate mold stains and can be used on most surfaces, including grout, concrete, and brick.

Remove lime and hard-water stains with these nonfoaming cleaners. They can be used on most surfaces, including metal and plastic.

Often used to clean sensitive parts and equipment in precision applications, such as electronics and medical device manufacturing, these cleaners rinse away without leaving a residue. They can be used for both manual and ultrasonic cleaning.

Low-foaming cleaners can be used in spray washers and laboratory dishwashers.

Cleaners with citric acid are phosphate free, making them safe for use on aluminum, brass, bronze, and copper. They also remove rust.