McMaster-Carr logo
    Forward
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Print
    How can we improve?
    Comments
    E-mail address (if you would like a response)
    57 Products

    Files for Plastic, Laminate, and Fiberglass

    Extra-sharp teeth cut quickly. These files do not include a handle but do have a tang that fits into a handle. Length does not include the tang.
    Tapered Rectangle
    Image of Product. Front orientation. Files. Files for Plastic, Laminate, and Fiberglass.
    Image of Specification. Front orientation. ZoomedIn view. Single-Cut Face. Files for Plastic, Laminate, and Fiberglass.
    Image of Specification. Front orientation. ZoomedIn view. Single-Cut Face with Chip Breaker. Files for Plastic, Laminate, and Fiberglass.
    Single-Cut Face—Surface has one set of diagonal teeth and is often used with light pressure to slowly remove material.
    Single-Cut Face with Chip Breaker—Speed up reaching a fine finish. They have single-cut teeth divided by diagonal cutting edges that act as chip breakers—the chip breakers rough the surface while the single-cut teeth smooth it.
    For Fine Finish
    Lg.
    Wd.
    Thk.
    Edge Tooth
    Style
    For Use On
    Each
    Single Cut Flat Face
     
    Rigid
    8"3/4"1/8"Flat Single CutPlastic, Laminate, Fiberglass8189A11000000
    10"15/16"3/16"Flat Single CutPlastic, Laminate, Fiberglass8189A1200000
    12"1 1/8"3/16"Flat Single CutPlastic, Laminate, Fiberglass8189A1300000
    14"1 5/16"1/4"Flat Single CutPlastic, Laminate, Fiberglass8189A1400000
     
    Single Cut Flat Face with Chip Breaker
     
    Rigid
    10"15/16"3/16"Flat Single CutPlastic, Laminate, Fiberglass8189A1500000
    12"1 1/8"3/16"Flat Single CutPlastic, Laminate, Fiberglass8189A1600000
    14"1 5/16"1/4"Flat Single CutPlastic, Laminate, Fiberglass8189A1700000
     

    Burs for Masonry, Ceramics, and Composites

    Diamond-cut teeth effectively cut hard materials.
    Cylinder with Flat Tip
    Image of ProductInUse. Front orientation. Burs. Burs for Masonry, Ceramics, and Composites, Cylinder with Flat Tip.
    Image of Product. Diamond-Cut Tooth. Front orientation. Burs. Burs for Masonry, Ceramics, and Composites, Cylinder with Flat Tip, Diamond-Cut Tooth.

    Diamond-Cut Tooth

    Flat cylinder burs are for straight edges and flat surfaces.
    Head
    Diamond-Cut Tooth
    (Extra-Fine Grit)
    Shank
    Dia.
    Dia.
    Lg.
    Overall
    Lg.
    Bur Trade
    No.
    For Use On
    Each
    Carbide
    1/4"1/4"5/8"2"SA-1Ceramic, Bricks, Stone, Concrete, Glass, Fiberglass, Carbon Fiber, Graphite4197A11000000
    1/4"3/8"3/4"2 1/2"SA-3Ceramic, Bricks, Stone, Concrete, Glass, Fiberglass, Carbon Fiber, Graphite4197A1200000
    1/4"1/2"1"2 3/4"SA-5Ceramic, Bricks, Stone, Concrete, Glass, Fiberglass, Carbon Fiber, Graphite4197A1300000
     
    Cylinder with Flat-Cutter Tip
    Image of ProductInUse. Front orientation. Burs. Burs for Masonry, Ceramics, and Composites, Cylinder with Flat-Cutter Tip.
    Image of Product. Diamond-Cut Tooth. Front orientation. Burs. Burs for Masonry, Ceramics, and Composites, Cylinder with Flat-Cutter Tip, Diamond-Cut Tooth.

    Diamond-Cut Tooth

    Flat cutter cylinder burs are for straight edges, flat surfaces, and flat-bottom holes and slots.
    Head
    Diamond-Cut Tooth
    (Extra-Fine Grit)
    Shank
    Dia.
    Dia.
    Lg.
    Overall
    Lg.
    Bur Trade
    No.
    For Use On
    Each
    Carbide
    1/4"1/4"5/8"2"SB-1Ceramic, Bricks, Stone, Concrete, Glass, Fiberglass, Carbon Fiber, Graphite4197A312000000
    1/4"3/8"3/4"2 1/2"SB-3Ceramic, Bricks, Stone, Concrete, Glass, Fiberglass, Carbon Fiber, Graphite4197A41200000
    1/4"1/2"1"2 3/4"SB-5Ceramic, Bricks, Stone, Concrete, Glass, Fiberglass, Carbon Fiber, Graphite4197A51200000
     
    Cylinder with Round Tip
    Image of ProductInUse. Front orientation. Burs. Burs for Masonry, Ceramics, and Composites, Cylinder with Round Tip.
    Image of Product. Front orientation. Burs. Burs for Masonry, Ceramics, and Composites, Cylinder with Round Tip, Diamond-Cut Tooth.

    Diamond-Cut Tooth

    Round cylinder burs are for curved surfaces and slots and round-bottom holes and slots.
    Head
    Diamond-Cut Tooth
    (Extra-Fine Grit)
    Shank
    Dia.
    Dia.
    Lg.
    Overall
    Lg.
    Bur Trade
    No.
    For Use On
    Each
    Carbide
    1/4"1/4"5/8"2"SC-1Ceramic, Bricks, Stone, Concrete, Glass, Fiberglass, Carbon Fiber, Graphite4197A14000000
    1/4"3/8"3/4"2 1/2"SC-3Ceramic, Bricks, Stone, Concrete, Glass, Fiberglass, Carbon Fiber, Graphite4197A1500000
    1/4"1/2"1"2 3/4"SC-5Ceramic, Bricks, Stone, Concrete, Glass, Fiberglass, Carbon Fiber, Graphite4197A1600000
     
    Tree with Round Tip
    Image of ProductInUse. Front orientation. Burs. Burs for Masonry, Ceramics, and Composites, Tree with Round Tip.
    Image of Product. Front orientation. Burs. Burs for Masonry, Ceramics, and Composites, Tree with Round Tip, Diamond-Cut Tooth.

    Diamond-Cut Tooth

    Round tree burs are for curved surfaces and slots and curved holes with rounded bottoms.
    Head
    Diamond-Cut Tooth
    (Extra-Fine Grit)
    Shank
    Dia.
    Dia.
    Lg.
    Overall
    Lg.
    Bur Trade
    No.
    For Use On
    Each
    Carbide
    1/4"1/4"5/8"2"SF-1Ceramic, Bricks, Stone, Concrete, Glass, Fiberglass, Carbon Fiber, Graphite4197A21000000
    1/4"3/8"3/4"2 1/2"SF-3Ceramic, Bricks, Stone, Concrete, Glass, Fiberglass, Carbon Fiber, Graphite4197A2200000
    1/4"1/2"1"2 3/4"SF-5Ceramic, Bricks, Stone, Concrete, Glass, Fiberglass, Carbon Fiber, Graphite4197A2300000
     
    Tree with Pointed Tip
    Image of ProductInUse. Front orientation. Burs. Burs for Masonry, Ceramics, and Composites, Tree with Pointed Tip.
    Image of Product. Front orientation. Burs. Burs for Masonry, Ceramics, and Composites, Tree with Pointed Tip, Diamond-Cut Tooth.

    Diamond-Cut Tooth

    Pointed tree burs are for curved surfaces and slots and curved holes with pointed bottoms.
    Head
    Diamond-Cut Tooth
    (Extra-Fine Grit)
    Shank
    Dia.
    Dia.
    Lg.
    Overall
    Lg.
    Bur Trade
    No.
    For Use On
    Each
    Carbide
    1/4"1/4"5/8"2"SG-1Ceramic, Bricks, Stone, Concrete, Glass, Fiberglass, Carbon Fiber, Graphite4197A24000000
    1/4"3/8"3/4"2 1/2"SG-3Ceramic, Bricks, Stone, Concrete, Glass, Fiberglass, Carbon Fiber, Graphite4197A2500000
    1/4"1/2"1"2 3/4"SG-5Ceramic, Bricks, Stone, Concrete, Glass, Fiberglass, Carbon Fiber, Graphite4197A2600000
     
    Ball
    Image of ProductInUse. Front orientation. Burs. Burs for Masonry, Ceramics, and Composites, Ball.
    Image of Product. Front orientation. Burs. Burs for Masonry, Ceramics, and Composites, Ball, Diamond-Cut Tooth.

    Diamond-Cut Tooth

    Ball burs are for curved surfaces, round slots, and round-bottom holes.
    Head
    Diamond-Cut Tooth
    (Extra-Fine Grit)
    Shank
    Dia.
    Dia.
    Lg.
    Overall
    Lg.
    Bur Trade
    No.
    For Use On
    Each
    Carbide
    1/4"1/4"7/32"2"SD-1Ceramic, Bricks, Stone, Concrete, Glass, Fiberglass, Carbon Fiber, Graphite4197A17000000
    1/4"3/8"5/16"2 1/8"SD-3Ceramic, Bricks, Stone, Concrete, Glass, Fiberglass, Carbon Fiber, Graphite4197A1800000
    1/4"1/2"7/16"2 1/4"SD-5Ceramic, Bricks, Stone, Concrete, Glass, Fiberglass, Carbon Fiber, Graphite4197A1900000
     
    Flame
    Image of ProductInUse. Flame. Front orientation. Burs. Burs for Masonry, Ceramics, and Composites, Flame.
    Image of Product. Front orientation. Burs. Burs for Masonry, Ceramics, and Composites, Flame, Diamond-Cut Tooth.

    Flame

    Diamond-Cut

    Tooth

    Flame burs are for contoured surfaces, slots, and holes.
    Head
    Diamond-Cut Tooth
    (Extra-Fine Grit)
    Shank
    Dia.
    Dia.
    Lg.
    Overall
    Lg.
    Bur Trade
    No.
    For Use On
    Each
    Carbide
    1/4"1/4"1/2"2"SH-1Ceramic, Bricks, Stone, Concrete, Glass, Fiberglass, Carbon Fiber, Graphite4197A27000000
    1/4"5/16"3/4"2 1/2"SH-2Ceramic, Bricks, Stone, Concrete, Glass, Fiberglass, Carbon Fiber, Graphite4197A2800000
    1/4"1/2"1 1/4"3"SH-5Ceramic, Bricks, Stone, Concrete, Glass, Fiberglass, Carbon Fiber, Graphite4197A2900000
     
    Oval
    Image of ProductInUse. Front orientation. Burs. Burs for Masonry, Ceramics, and Composites, Oval.
    Image of Product. Front orientation. Burs. Burs for Masonry, Ceramics, and Composites, Oval, Diamond-Cut Tooth.

    Diamond-Cut

    Tooth

    Oval burs are for oblong slots and holes.
    Head
    Diamond-Cut Tooth
    (Extra-Fine Grit)
    Shank
    Dia.
    Dia.
    Lg.
    Overall
    Lg.
    Bur Trade
    No.
    For Use On
    Each
    Carbide
    1/4"1/4"3/8"2"SE-1Ceramic, Bricks, Stone, Concrete, Glass, Fiberglass, Carbon Fiber, Graphite4197A313000000
    1/4"3/8"5/8"2 3/8"SE-3Ceramic, Bricks, Stone, Concrete, Glass, Fiberglass, Carbon Fiber, Graphite4197A41300000
    1/4"1/2"7/8"2 5/8"SE-5Ceramic, Bricks, Stone, Concrete, Glass, Fiberglass, Carbon Fiber, Graphite4197A51300000
     
    Cone
    Image of ProductInUse. Front orientation. Burs. Burs for Masonry, Ceramics, and Composites, Cone.
    Image of Product. Front orientation. Burs. Burs for Masonry, Ceramics, and Composites, Cone, Diamond-Cut Tooth.

    Diamond-Cut

    Tooth

    Cone burs are for beveled edges and countersunk holes.
    Head
    Diamond-Cut Tooth
    (Extra-Fine Grit)
    Shank
    Dia.
    Dia.
    Lg.
    Tip
    Angle
    Overall
    Lg.
    Bur Trade
    No.
    For Use On
    Each
    Carbide
    1/4"1/4"1/8"90°2"SK-1Ceramic, Bricks, Stone, Concrete, Glass, Fiberglass, Carbon Fiber, Graphite4197A316000000
    1/4"1/4"3/16"60°2"SJ-1Ceramic, Bricks, Stone, Concrete, Glass, Fiberglass, Carbon Fiber, Graphite4197A31500000
    1/4"3/8"3/16"90°1 15/16"SK-3Ceramic, Bricks, Stone, Concrete, Glass, Fiberglass, Carbon Fiber, Graphite4197A41500000
    1/4"3/8"5/16"60°2 1/16"SJ-3Ceramic, Bricks, Stone, Concrete, Glass, Fiberglass, Carbon Fiber, Graphite4197A41400000
    1/4"1/2"1/4"90°2"SK-5Ceramic, Bricks, Stone, Concrete, Glass, Fiberglass, Carbon Fiber, Graphite4197A51500000
    1/4"1/2"7/16"60°2 3/16"SJ-5Ceramic, Bricks, Stone, Concrete, Glass, Fiberglass, Carbon Fiber, Graphite4197A51400000
     
    Inverted Cone
    Image of ProductInUse. Front orientation. Burs. Burs for Masonry, Ceramics, and Composites, Inverted Cone.
    Image of Product. Front orientation. Burs. Burs for Masonry, Ceramics, and Composites, Inverted Cone, Diamond-Cut Tooth.

    Diamond-Cut

    Tooth

    Inverted cone burs are for inverted-angle holes and dovetailed slots.
    Head
    Diamond-Cut Tooth
    (Extra-Fine Grit)
    Shank
    Dia.
    Dia.
    Lg.
    Tip
    Angle
    Overall
    Lg.
    Bur Trade
    No.
    For Use On
    Each
    Carbide
    1/4"1/4"5/16"10°2"SN-1Ceramic, Bricks, Stone, Concrete, Glass, Fiberglass, Carbon Fiber, Graphite4197A319000000
    1/4"3/8"3/8"15°2 1/8"SN-2Ceramic, Bricks, Stone, Concrete, Glass, Fiberglass, Carbon Fiber, Graphite4197A41800000
    1/4"1/2"1/2"12°2 1/4"SN-3Ceramic, Bricks, Stone, Concrete, Glass, Fiberglass, Carbon Fiber, Graphite4197A51800000
     
    Tapered Cone with Round Tip
    Image of ProductInUse. Front orientation. Burs. Burs for Masonry, Ceramics, and Composites, Tapered Cone with Round Tip.
    Image of Product. Front orientation. Burs. Burs for Masonry, Ceramics, and Composites, Tapered Cone with Round Tip, Diamond-Cut Tooth.

    Diamond-Cut Tooth

    Round tapered cone burs are for tapered holes and slots with rounded bottoms.
    Head
    Diamond-Cut Tooth
    (Extra-Fine Grit)
    Shank
    Dia.
    Dia.
    Lg.
    Tip
    Angle
    Overall
    Lg.
    Bur Trade
    No.
    For Use On
    Each
    Carbide
    1/4"1/4"5/8"14°2"SL-1Ceramic, Bricks, Stone, Concrete, Glass, Fiberglass, Carbon Fiber, Graphite4197A317000000
    1/4"3/8"1 1/16"14°2 13/16"SL-3Ceramic, Bricks, Stone, Concrete, Glass, Fiberglass, Carbon Fiber, Graphite4197A41600000
    1/4"1/2"1 1/8"14°2 7/8"SL-4Ceramic, Bricks, Stone, Concrete, Glass, Fiberglass, Carbon Fiber, Graphite4197A51600000
     
    Tapered Cone with Pointed Tip
    Image of ProductInUse. Front orientation. Burs. Burs for Masonry, Ceramics, and Composites, Tapered Cone with Pointed Tip.
    Image of Product. Front orientation. Burs. Burs for Masonry, Ceramics, and Composites, Tapered Cone with Pointed Tip, Diamond-Cut Tooth.

    Diamond-Cut Tooth

    Pointed tapered cone burs are for tapered holes and slots with pointed bottoms.
    Head
    Diamond-Cut Tooth
    (Extra-Fine Grit)
    Shank
    Dia.
    Dia.
    Lg.
    Tip
    Angle
    Overall
    Lg.
    Bur Trade
    No.
    For Use On
    Each
    Carbide
    1/4"1/4"1/2"22°2"SM-1Ceramic, Bricks, Stone, Concrete, Glass, Fiberglass, Carbon Fiber, Graphite4197A318000000
    1/4"3/8"5/8"28°2 1/2"SM-4Ceramic, Bricks, Stone, Concrete, Glass, Fiberglass, Carbon Fiber, Graphite4197A41700000
    1/4"1/2"7/8"28°2 5/8"SM-5Ceramic, Bricks, Stone, Concrete, Glass, Fiberglass, Carbon Fiber, Graphite4197A51700000
     

    Thread-Repairing File Sets

    Use these sets to repair fastener, pipe, and conduit threads.
    For Internal and External Threads
    Image of Product. Front orientation. Thread-Repairing Files. Thread-Repairing File Sets, For Internal and External Threads.
    No. of
    Pieces
    For Threads per In.
    For Thread Pitch, mm
    Overall
    Lg.
    Material
    Container
    Type
    Each
    48, 9, 10, 11, 11 1/2, 12, 13, 14, 16, 18, 20, 24, 27, 28, 320.75, 1, 1.25, 1.5, 1.75, 2, 2.5, 39 1/4"SteelPlastic Pouch2542A610000000

    Fastener Thread-Repairing Files

    Repair rusted and damaged fastener threads. One file restores a range of thread sizes.
    For Internal and External Threads
    Image of Product. Front orientation. Thread-Repairing Files. Fastener Thread-Repairing Files, For Internal and External Threads.
    For Threads per In.
    For Thread Pitch, mm
    Wd.
    Thk.
    Overall
    Lg.
    Material
    Each
    —0.75, 1, 1.25, 1.5, 1.75, 2, 2.5, 33/8"3/8"9 1/4"Steel2542A42000000
    9, 10, 12, 16, 20, 27, 28, 32—3/8"3/8"9 1/4"Steel2542A5100000
    11, 12, 13, 14, 16, 18, 20, 24—3/8"3/8"9 1/4"Steel2542A4100000

    Pipe and Conduit Thread-Repairing Files

    Repair rusted and damaged threads in pipe and conduit. One file restores a range of thread sizes.
    For Internal Threads
    Image of Product. Front orientation. Thread-Repairing Files. Pipe and Conduit Thread-Repairing Files, For Internal Threads.
    Thread File Handles—Thread file handles slip over the file to provide a comfortable grip.
    Thread-Repairing Files
    Thread File Handles
    For Threads
    per In.
    Wd.
    Thk.
    Overall
    Lg.
    Material
    Each
    Pkg.
    Qty.
    Pkg.
    8, 107/16"7/16"10"Steel2616A1600000062616A4100000
    8, 11 1/27/16"7/16"10"Steel2616A170000062616A410000
    10, 147/16"7/16"10"Steel2616A180000062616A410000
    For Internal and External Threads
    Image of Product. Front orientation. Thread-Repairing Files. Pipe and Conduit Thread-Repairing Files, For Internal and External Threads.
    For Threads per In.
    Wd.
    Thk.
    Overall
    Lg.
    Material
    Each
    8, 10, 11 1/2, 14, 16, 18, 24, 273/8"3/8"9 1/4"Steel2542A52000000

    Sanding Bricks for Masonry, Ceramics, and Composites

    Image of Product. Front orientation. Sanding Sticks and Bricks. Sanding Bricks for Masonry, Ceramics, and Composites.
    Grit
    Wd.
    Lg.
    Thk.
    For Use On
    Abrasive
    Material
    Each
    For Rough Finish
    243"6"1"Ceramic, Bricks, Stone, Concrete, Glass, Carbon Fiber, Graphite, FiberglassSilicon Carbide4509A2000000
    243 1/2"8"1 1/2"Ceramic, Bricks, Stone, Concrete, Glass, Carbon Fiber, Graphite, FiberglassSilicon Carbide4509A100000
     
    back to top