Desiccant Compressed Air Dryers

	Component Component

Air Dryer

Air Dryer/Filter

Air Dryer/Filter/Regulator

	For Removing For Removing

	Inlet Pipe Size Inlet Pipe Size

	Maximum Pressure Maximum Pressure

	Bowl Type Bowl Type


Clear	Opaque with Sight Glass

	Maximum Flow Rate Maximum Flow Rate

	Overall Height Overall Height

	Outlet Pipe Size Outlet Pipe Size

	Removes Particle Size Down To Removes Particle Size Down To

Less than 100 microns

	Inlet Thread Type Inlet Thread Type

NPT

	Outlet Thread Type Outlet Thread Type

NPT

	Maximum Temperature Maximum Temperature

100° to 249.9° F

	Housing Material Housing Material

Plastic

Aluminum

Rubber

	Outlet Connection Type Outlet Connection Type

	Pipe

	Outlet Gender Outlet Gender

Female

Male

	Desiccant Material Desiccant Material

Silica Gel

Clay

	Drain Type Drain Type

Automatic

Manual

Without Drain

	Desiccant Service Indicator Included Desiccant Service Indicator Included

Yes

	Maximum Flow Rate @ Dew Point Temperature Maximum Flow Rate @ Dew Point Temperature

	Inlet Gender Inlet Gender

Female

Male

	Bowl Material Bowl Material

Acrylic Plastic

Aluminum

Polycarbonate Plastic

Polyurethane Rubber

	REACH (Registration, Evaluation, Authorization and Restriction of Chemicals) REACH (Registration, Evaluation, Authorization and Restriction of Chemicals)

REACH Compliant

	RoHS (Restriction of Hazardous Substances) RoHS (Restriction of Hazardous Substances)

RoHS Compliant

Forward

How can we improve?

47 Products

About Air Preparation

Acrylic Bowl

Aluminum Bowl

Polyurethane Bowl

These dryer/filters have a clay desiccant that removes moisture, oil, and particles, so there’s no need to install a separate filter and dryer. Once aftercoolers and separators have removed the bulk of the water, they remove any remaining moisture in your air line. Dryer/filters have a clear bowl or sight glass that allow you to see inside to monitor the contents. When the desiccant becomes saturated, it changes color to indicate that it should be replaced.

Dryer/filters with an aluminum bowl stand up to synthetic compressor lubricants and solvents better than dyers with an acrylic plastic bowl can.

Dryer/filters with a polyurethane bowl have excellent resistance to synthetic compressor lubricants, solvents, acids, and other chemicals.

For technical drawings and 3-D models, click on a part number.

Dryer/Filters
Inlet		Outlet						Overall				Replacement Desiccant		Replacement Filter Elements
Pipe Size	Connection	Pipe Size	Connection	Max. Flow Rate	Max. Pressure, psi	Max. Temp., °F	Housing Material	Dia.	Ht.		Each		Each		Each
Acrylic Plastic Bowl—Clear
1/2	NPT Female	1/2	NPT Female	20 scfm @ 100 psi	150	150°	Aluminum	4 3/8"	11 7/8"	0000000	0000000	0000000	000000	000000	00
1	NPT Female	1	NPT Female	60 scfm @ 100 psi	150	150°	Aluminum	6 1/2"	19 3/4"	0000000	00000000	0000000	00000	000000	00
1 1/2	NPT Female	1 1/2	NPT Female	100 scfm @ 100 psi	150	150°	Aluminum	8"	21 3/4"	0000000	00000000	0000000	000000	000000	00
2	NPT Female	2	NPT Female	200 scfm @ 100 psi	150	150°	Aluminum	9 1/2"	19 1/8"	0000000	00000000	0000000	000000	000000	00
Aluminum Bowl—Opaque with Sight Glass
1/2	NPT Female	1/2	NPT Female	20 scfm @ 100 psi	250	150°	Aluminum	4 3/8"	11 7/8"	000000	00000000	0000000	00000	000000	00
1	NPT Female	1	NPT Female	60 scfm @ 100 psi	250	150°	Aluminum	6 1/2"	19 3/4"	000000	00000000	0000000	00000	000000	00
1 1/2	NPT Female	1 1/2	NPT Female	100 scfm @ 100 psi	250	150°	Aluminum	8"	21 3/4"	000000	00000000	0000000	000000	000000	00
2	NPT Female	2	NPT Female	200 scfm @ 100 psi	250	150°	Aluminum	9 1/2"	19 1/8"	000000	00000000	0000000	000000	000000	00
Polyurethane Rubber Bowl—Clear
1/2	NPT Female	1/2	NPT Female	20 scfm @ 100 psi	250	180°	Polyurethane Rubber	4 5/8"	10 5/8"	000000	000000	0000000	00000	0000000	000000
1/2	NPT Male	1/2	NPT Male	15 scfm @ 100 psi	250	180°	Polyurethane Rubber	3 1/8"	9 1/4"	0000000	000000	0000000	00000	000000	00
1	NPT Female	1	NPT Female	40 scfm @ 100 psi	250	180°	Polyurethane Rubber	6 1/8"	9 1/2"	000000	00000000	0000000	00000	0000000	000000
1	NPT Female	1	NPT Female	60 scfm @ 100 psi	250	180°	Polyurethane Rubber	6 1/8"	14 3/4"	000000	00000000	0000000	00000	0000000	000000

Disposable Desiccant Compressed Air Dryer/Filters for Oil and Particle Removal

Use these dryer/filters to protect air-powered tools from water, oil, oil vapor, and particles, then throw them away when you're done. They have a polyurethane housing that has excellent resistance to synthetic compressor lubricants, solvents, acids, and chemicals. The bowl is clear so you can monitor the desiccant. When it becomes saturated, it changes color to indicate the dryer/filter should be replaced. Install in your air line just before the tool you wish to protect.

For technical drawings and 3-D models, click on a part number.

Pipe Size								Overall
Inlet	Outlet	Connections	Max. Flow Rate	Max. Pressure, psi	Max. Temp., °F	Dew Point Temp. Reduction Rate	Removes Particle Size Down To, microns	Dia.	Ht.	Desiccant Included		Each
Polyurethane Rubber Housing
Polyurethane Rubber Bowl—Clear
1/4	1/4	NPT Female	5 scfm @ 100 psi	250	180°	20%	0.3	2 7/8"	4 1/2"	Yes	0000000	0000000

Easy-View Desiccant Compressed Air Dryer/Filters for Oil and Particle Removal

Air Dryer/Filter

Air Dryer/Filter with Shut-Off Valve

Air Dryer/Filter/Regulator with Shut-Off Valve

With a clear polycarbonate bowl that’s visible from all angles and silica gel desiccant that changes from blue to pink, it’s easy to see when it’s time to change the cartridge on these dryer/filters and dryer/filter/regulators. In addition to water, they remove compressor oil and particles, preventing damage to air-powered tools and equipment. Unlike some desiccant dryers, they don't require a filter to protect the desiccant. Both the dryer and filter are in the same cartridge, saving space and reducing downtime when they need to be changed. Install them after aftercoolers and separators, which remove the bulk of the moisture.

Dryer/filters and dryer/filter/regulators with a shut-off valve can stop the flow of air when the units are not in use to extend the life of the desiccant.

Dryer/filter/regulators have a regulator to monitor and adjust the flow of air.

Dryer/Filters
Pipe Size									Overall						Replacement Desiccant
Inlet	Outlet	Connections	Max. Flow Rate	Pressure Regulating Range, psi	Max. Pressure, psi	Max. Temp., °F	Removes Particle Size Down To, microns	Housing Material	Ht.	Wd.	Dp.	Gauge Included		Each		Each
Polycarbonate Plastic Bowl—Clear
Air Dryer/Filter
1/2	1/2	NPT Female	30 scfm @ 120 psi	__	120	120°	40	Aluminum	16 7/8"	3"	3"	No	0000000	0000000	0000000	0000000
1/2	1/2	NPT Female	40 scfm @ 120 psi	__	120	120°	40	Aluminum	21"	4"	4"	No	0000000	000000	0000000	000000
Air Dryer/Filter with Shut-Off Valve
1/2	1/2	NPT Female	30 scfm @ 120 psi	__	120	120°	40	Aluminum	16 7/8"	12"	3"	No	0000000	000000	0000000	000000
1/2	1/2	NPT Female	40 scfm @ 120 psi	__	120	120°	40	Aluminum	21"	13"	4"	No	0000000	000000	0000000	000000
Air Dryer/Filter/Regulator with Shut-Off Valve
1/2	1/2	NPT Female	30 scfm @ 120 psi	5-120	120	120°	40	Aluminum	17 1/8"	15"	3"	Yes	0000000	000000	0000000	000000
1/2	1/2	NPT Female	40 scfm @ 120 psi	5-120	120	120°	40	Aluminum	21 1/4"	16"	4"	Yes	0000000	000000	0000000	000000

Automatic Continuous-Use Desiccant Compressed
Air Dryer/Filters for Oil and Particle Removal

ABS Plastic Housing

Aluminum Housing

Each of these filter/dryers has two desiccant towers—one that absorbs moisture in the air while the other reactivates saturated desiccant so you have an uninterrupted supply of clean, dry compressed air. In addition to water, these remove compressor oil and particles, preventing damage to air-powered tools and equipment. Unlike some desiccant dryers, they don't require a filter to protect the desiccant. They have an electronic display with an audible alarm that indicates when it’s time to change the filters. Install them after aftercoolers and separators, which remove the bulk of the moisture.

Dyer/Filters
Pipe Size									Overall					Replacement Filter Element Kits
Inlet	Outlet	Connections	Max. Flow Rate	Dew Point Temp., °F	Max. Pressure, psi	Max. Temp., °F	Removes Particle Size Down To, microns	Voltage	Ht.	Wd.	Dp.		Each		Each
ABS Plastic Housing and Bowl
3/8	3/8	NPT Female	3 scfm @ -40° F	-40°	200	120°	0.1	120V AC	16 3/4"	9 3/8"	8 3/8"	0000000	000000000	000000	00
3/8	3/8	NPT Female	9 scfm @ -40° F	-40°	200	120°	0.1	120V AC	32 1/2"	9 3/8"	8 3/8"	0000000	00000000	000000	00
Aluminum Housing and Bowl
3/8	3/8	NPT Female	25 scfm @ -40° F	-40°	230	122°	0.5	120V AC	42"	11"	3 3/4"	0000000	00000000	0000000	0000000

Disposable Desiccant Compressed Air Dryer/Filters for Particle Removal

Install these dryer/filters just before air-powered tools as final protection from water and particles and throw them away when you’re done. They have a clear bowl so you can see inside to monitor the desiccant. When the desiccant becomes saturated, it changes color to indicate that the dryer/filter should be changed.

For technical drawings and 3-D models, click on a part number.

Inlet		Outlet							Overall
Pipe Size	Connection	Pipe Size	Connection	Max. Flow Rate	Dew Point Temp., °F	Max. Pressure, psi	Max. Temp., °F	Removes Particle Size Down To, microns	Dia.	Ht.	Desiccant Included		Each
Polycarbonate Plastic Bowl—Clear
1/4	NPT Female	1/4	NPT Male	20 scfm @ 100 psi	-30°	125	130°	40	1 3/4"	3 3/4"	Yes	000000	000000