Withstands temperatures up to 175° F.

Replace your cartridge less frequently. Use these cartridges in a filter housing to reduce contaminants in your water line.

Also known as absolute-rated filter cartridges, these remove 99.9% of particles.

Use these cartridges in a filter housing to treat water quality and reduce odor and chlorine in your line.

Made of fiberglass, these cartridges can withstand harsh solvents and acids in high-temperature applications.

With excellent corrosion and chemical resistance, these cartridges can stand up to caustic soda, coolant, and harsh detergent.

Replace your cartridge less frequently—these are pleated, which provides a large surface area for high debris retention.

Withstands temperatures up to 250° F.

Use these cartridges in a diesel fuel generator to filter contaminants.

Withstands temperatures up to 140° F.

There's no need to stop your water supply and disassemble these filters for cleaning. Turn the handle to flush debris from the cartridge and purge dirty water through the drain at the bottom.

Prepare water for use in beverages, food preparation, and ice production with these filters. They remove particles that cause unpleasant tastes and odors.

Filter housings are made of 304 or 316 stainless steel for very good-to-excellent corrosion resistance.

Along with a cartridge, these housings are used in liquid processing lines to filter contaminants and minimize bacteria growth in food and pharmaceutical plants, as well as other sanitary environments.

These filter housings are made of durable zinc and clear plastic, so you can monitor collecting debris without stopping flow.

Made of CPVC, these lightweight strainers have excellent corrosion resistance and withstand higher temperatures than all of our other plastic Y-strainers.

A wide two-piece body holds more debris than other plastic Y-strainers. The body comes apart for easy cleaning without disconnecting your line.

These Y-strainers for low-pressure applications have good corrosion resistance.

For use in medium-pressure applications, these Y-strainers have good corrosion resistance.

Commonly used with reservoirs and tanks, these strainers filter particles before they enter your system.

The tallest of our suction strainers, these have a large surface area to retain more debris. They are also known as sump strainers.

Also known as foot valves, these strainers stop particles from entering your line while preventing backward flow. They are commonly used with reservoirs and tanks.

Use a hacksaw to remove the pipe sizes that are smaller than you need.

Install these high-capacity T-strainers prior to valves, pumps, and nozzles to protect sensitive equipment.

Made of chemical-resistant plastic, these strainers can withstand exposure to salt solutions and solvents that can corrode metals.

Well suited for high-flow applications, these strainers have an extra-long housing and screen for greater debris-holding capacity than our other T-strainers.

Add these inline T-strainers to your sanitary process line to trap solid particles during clean-in-place (CIP) cycles. They have quick-clamp sanitary tube connections, also known as tri-clamp connections, for use in dairy, food, and other process lines that require frequent cleaning and disassembly. As the high-pressure cleaning fluid flows through your line, the strainer's screen catches particles larger than 1/8" to prevent damage to pumps, valves, and other downstream components.

A nylon housing provides excellent durability and impact resistance.

These strainers are clear so you can monitor debris collecting in the screen.

Install these strainer washers in pipe or fittings to protect equipment in locations where other strainers don’t fit.

Iron basket strainers offer fair corrosion resistance.

These strainers are made of durable bronze and clear plastic so you can monitor collecting debris without stopping flow in your system.

Iron basket strainers offer fair corrosion resistance.

Bronze basket strainers are stronger and more corrosion resistant than iron basket strainers.

Spend less time on maintenance—these strainers have an inverted basket that allows debris to fall into the drain as it collects.

CPVC can handle higher temperatures than PVC and polyester. Use for applications up to 180° F.

Use in applications up to 300 psi.

Designed for high-purity applications, these filters are cleaned and bagged individually to prevent contamination. Use in applications up to 100 psi.

This wire cloth is commonly used to make strainers, filter screens, and sieves.

Often used in sieves and vibratory shakers for testing applications, the openings of this wire cloth are woven to a tight size tolerance for accurate, consistent sifting results.

Designed for use in food, pharmaceutical, and other sanitary environments, this precision wire cloth is sintered (fused together) to create a strong, smooth surface that’s free of crevices where contaminants can collect.

Also known as Dutch weave, this wire cloth has a tight weave that traps tiny particles and provides strength for use in high-pressure and high-flow applications.

The welded joints keep opening sizes uniform and prevent fraying as you bend this wire cloth.

Good for use with abrasive materials in noncorrosive applications, this steel wire cloth has excellent strength and good wear resistance.

This wire cloth is woven and available in the widest variety of sizes we offer.

Build screens, barriers, and enclosures that last—the PVC coating on this wire cloth provides excellent corrosion and wear resistance for a long service life.

The epoxy coating on this wire cloth makes the steel oil resistant, protects it from corrosion, and adds rigidity for a long service life.

Also known as space cloth, wires are crimped where they intersect to maintain an accurate opening size when used with heavy materials. The crimping process also adds strength and rigidity.

More corrosion-resistant in salt water than stainless steel, these brass wire cloths are often used in marine environments.

Unlike brass and bronze, copper is nonsparking and nonmagnetic.

Also known as Monel 400, this nickel-copper alloy is the most corrosion resistant of our wire cloth.