Sorbents for Heavy Metals

Reduce lead, zinc, mercury, and other heavy metals in wastewater and storm water while letting water flow through. Shape these flexible sorbents around drain grates and storm drains. The woven polyethylene covering is UV- and puncture-resistant, so they hold up well outdoors and on rough surfaces such as pavement.
For Use With | Ht. | Wd. | Lg. | Removal Cap., lbs. | Material | Color | Each | |
Heavy Metals | 4" | 7" | 108" | 2.5 | Polyethylene Plastic | Green | 0000000 | 0000000 |
Outdoor Sorbents
Keep oil out of soil and fuel out of drains. These sorbents cling to oil but let water pass through, so you can leave them outside for weeks to catch oil spills and leaks. More rugged than typical sorbents, these sorbents won’t break down when exposed to sunlight, and gravel and debris won’t pierce them.
Perforated pads absorb small spills and can be used to wipe off equipment. They are perforated up the center.
Pillows are thicker than pads, so they soak up more liquid. Use them under drips and in corners.
Rolls lay flat and can be cut to size, so you can spread them out over pavement or grass. They’re also good for large spills and leaks around equipment. Perforated rolls are perforated every 8" across the width and every 12” up the center.
Socks are flexible. Wrap them around corners, equipment, or storm drains.
Booms won’t burst even if you drive over them with a forklift. Weigh booms down with rebar, so they won’t roll out of place.

Each | ||||||
---|---|---|---|---|---|---|
Wd. | Lg., ft. | Material | Color | Spill Cap., gal. | Each | |
For Use With Oil | ||||||
19" | 80 | Polypropylene Fabric | Black/Blue | 62 | 0000000 | 0000000 |

Each | |||||||
---|---|---|---|---|---|---|---|
Ht. | Wd. | Lg. | Material | Color | Spill Cap., gal. | Each | |
For Use With Oil | |||||||
4" | 7" | 108" | Polyethylene Fabric | Green | 5.3 | 0000000 | 000000 |

Each | ||||||
---|---|---|---|---|---|---|
Dia. | Lg. | Material | Color | Spill Cap., gal. | Each | |
For Use With Oil | ||||||
3" | 96" | Synthetic Fabric | Gray | 3.3 | 0000000 | 000000 |
Curb-Style Storm Drain Filters


Prevent rainwater from carrying trash, debris, and sediment into sewers. These filters are often used on construction sites. They mount inside curb openings, keeping them out of the way of vehicles.
In addition to solids, 22"-35" filters remove oil and fuels from storm water. Two tension rods hold the filters in place.
Push the foam anchors on 36" and 48" filters into a curb opening to hold them securely in place, even during heavy rainstorms. Connect them side by side or cut them to length to fit any drain width.
Storm Drain Filters | Replacement Filters | |||||||||
---|---|---|---|---|---|---|---|---|---|---|
Wd. | Dia. | For Removing | Oil Removal Cap., gal. | Material | Color | Installation Type | Each | Each | ||
22"-35" | __ | Debris, Fuel, Oil, Sediment | 1 | Synthetic Fiber | Gray | Tension Rods | 0000000 | 0000000 | 0000000 | 000000 |
36" | 4" | Debris, Sediment | __ | Polypropylene Fabric | Yellow | Foam Wedge Inserts | 0000000 | 000000 | 000000 | 00 |
48" | 4" | Debris, Sediment | __ | Polypropylene Fabric | Yellow | Foam Wedge Inserts | 0000000 | 000000 | 000000 | 00 |