About Lubricants
More
Penetrating Lubricants
Cut through dirt, grease, and rust, loosen stuck fasteners, and protect tools and equipment with these thin, multipurpose lubricants.
Lubricants with PTFE provide long-lasting lubrication. Lubricants with silicone are clear, have excellent moisture resistance, and can be used on most rubber and plastic.
Lubricants cannot be sold to the listed regions due to import regulations, product labeling requirements, or regulatory limits on VOCs (volatile organic compounds).
LPS Silicone dries to leave a clear, dry film that protects and lubricates. These silicone lubricants are NSF registered H1 for incidental food contact.
Container | ||||||||
---|---|---|---|---|---|---|---|---|
Size | Net Weight | Type | Additive | Temp. Range, °F | Specifications Met | Cannot Be Sold To | Each | |
LPS Silicone | ||||||||
__ | 13 oz. | Aerosol Can | Silicone | -40° to 390° | NSF Registered H1 | Outside United States | 00000000 | 000000 |
5 gal. | __ | Pail | Silicone | -40° to 390° | NSF Registered H1 | Outside United States | 00000000 | 000000 |
Container | ||||||||
---|---|---|---|---|---|---|---|---|
Net Weight | Type | Additive | Temp. Range, °F | Specifications Met | Cannot Be Sold To | Pkg. Qty. | Pkg. | |
LPS Silicone | ||||||||
13 oz. | Aerosol Can | Silicone | -40° to 390° | NSF Registered H1 | Outside United States | 12 | 000000000 | 0000000 |
3M Silicone dries fast and is nonstaining. It is FDA Compliant for incidental contact with food.
Container | ||||||
---|---|---|---|---|---|---|
Net Weight, oz. | Type | Additive | Temp. Range, °F | Specifications Met | Each | |
3M Silicone | ||||||
13.4 | Aerosol Can | Silicone | -25° to 350° | FDA Compliant 21 CFR 178.3570 | 00000000 | 000000 |
Container | |||||||
---|---|---|---|---|---|---|---|
Net Weight, oz. | Type | Additive | Temp. Range, °F | Specifications Met | Pkg. Qty. | Pkg. | |
3M Silicone | |||||||
13.4 | Aerosol Can | Silicone | -25° to 350° | FDA Compliant 21 CFR 178.3570 | 12 | 000000000 | 0000000 |
Tri-Flow cleans, lubricates, and protects, even in extreme temperatures. Tri-Flow Pin Point has a precision-tip applicator.
Container | |||||||
---|---|---|---|---|---|---|---|
Size | Net Weight | Type | Additive | Temp. Range, °F | Specifications Met | Each | |
Tri-Flow Pin Point | |||||||
0.25 fl. oz. | __ | Pen | PTFE | -60° to 475° | NSF Registered H2 | 0000000 | 000000 |
Tri-Flow Industrial | |||||||
__ | 12 oz. | Aerosol Can | PTFE | -60° to 475° | NSF Registered H2 | 0000000 | 00000 |
2 fl. oz. | __ | Squeeze Bottle | PTFE | -60° to 475° | NSF Registered H2 | 0000000 | 0000 |
18 fl. oz. | __ | Spray Bottle | PTFE | -60° to 475° | NSF Registered H2 | 0000000 | 00000 |
1 gal. | __ | Jug | PTFE | -60° to 475° | NSF Registered H2 | 0000000 | 000000 |
Container | ||||||||
---|---|---|---|---|---|---|---|---|
Size | Net Weight | Type | Additive | Temp. Range, °F | Specifications Met | Pkg. Qty. | Pkg. | |
Tri-Flow Pin Point | ||||||||
0.25 fl. oz. | __ | Pen | PTFE | -60° to 475° | NSF Registered H2 | 12 | 0000000 | 0000000 |
Tri-Flow Industrial | ||||||||
__ | 12 oz. | Aerosol Can | PTFE | -60° to 475° | NSF Registered H2 | 12 | 00000000 | 000000 |
2 fl. oz. | __ | Squeeze Bottle | PTFE | -60° to 475° | NSF Registered H2 | 12 | 00000000 | 00000 |
18 fl. oz. | __ | Spray Bottle | PTFE | -60° to 475° | NSF Registered H2 | 6 | 00000000 | 000000 |
1 gal. | __ | Jug | PTFE | -60° to 475° | NSF Registered H2 | 2 | 00000000 | 000000 |
Food Industry Penetrating Lubricants
For use in food-processing and preparation areas, these thin, multipurpose lubricants are NSF registered H1 for incidental food contact. Use them to cut through dirt, grease, and rust, loosen stuck fasteners, and protect tools and equipment.
Lubricants with silicone are clear, have excellent water resistance, and can be used on rubber. Not for use on painted surfaces. Lubricants with PTFE provide long-lasting lubrication.
Lubricants cannot be sold to the listed areas due to product regulations.
Container | ||||||||
---|---|---|---|---|---|---|---|---|
Size | Net Weight | Type | Additive | Temp. Range, °F | Specifications Met | Cannot Be Sold To | Each | |
Sprayon LU 210 Food Grade Dry Silicone | ||||||||
__ | 10 oz. | Aerosol Can | Silicone | -40° to 450° | NSF Registered H1 | __ | 0000000 | 000000 |
Sprayon LU 700 Food Grade Machinery | ||||||||
__ | 10 oz. | Aerosol Can | __ | 20° to 450° | NSF Registered H1 | __ | 0000000 | 00000 |
Lubricants | ||||||||
1/4 fl. oz. | __ | Tube | PTFE | -45° to 450° | NSF Registered H1 | __ | 0000000 | 0000 |
4 fl. oz. | __ | Squeeze Bottle | PTFE | -45° to 450° | NSF Registered H1 | __ | 0000000 | 0000 |
__ | 11 oz. | Aerosol Can | Silicone | -55° to 390° | NSF Registered H1 | CA, NY | 0000000 | 00000 |
1 gal. | __ | Jug | PTFE | -45° to 450° | NSF Registered H1 | __ | 0000000 | 000000 |
Container | |||||||||
---|---|---|---|---|---|---|---|---|---|
Size | Net Weight | Type | Additive | Temp. Range, °F | Specifications Met | Cannot Be Sold To | Pkg. Qty. | Pkg. | |
Sprayon LU 210 Food Grade Dry Silicone | |||||||||
__ | 10 oz. | Aerosol Can | Silicone | -40° to 450° | NSF Registered H1 | __ | 12 | 0000000 | 0000000 |
Sprayon LU 700 Food Grade Machinery | |||||||||
__ | 10 oz. | Aerosol Can | __ | 20° to 450° | NSF Registered H1 | __ | 12 | 00000000 | 000000 |
Lubricants | |||||||||
1/4 fl. oz. | __ | Tube | PTFE | -45° to 450° | NSF Registered H1 | __ | 12 | 00000000 | 00000 |
4 fl. oz. | __ | Squeeze Bottle | PTFE | -45° to 450° | NSF Registered H1 | __ | 6 | 00000000 | 00000 |
__ | 11 oz. | Aerosol Can | Silicone | -55° to 390° | NSF Registered H1 | CA, NY | 12 | 00000000 | 000000 |
1 gal. | __ | Jug | PTFE | -45° to 450° | NSF Registered H1 | __ | 4 | 00000000 | 000000 |
High-Pressure Food Industry Penetrating Lubricants
Formulated to handle high loads and temperatures, these lubricants are NSF registered H1 for incidental food contact. Use them with chain and gears in food-processing and preparation areas and with hinges on ovens. They cut through dirt, grease, and rust, loosen stuck fasteners, and protect tools and equipment. Lubricants go on as a foam to cling to parts and resist dripping.
Biodegradable Food Industry Penetrating Lubricants
Protect food-processing and preparation equipment while limiting environmental impact. These thin, multipurpose lubricants are NSF registered H1 for incidental food contact and are considered Environmentally Acceptable Lubricants (EAL) by the EPA’s Vessel General Permit. To qualify as an EAL, a lubricant must be able to quickly break down in water. Use them to cut through dirt, grease, and rust, loosen stuck fasteners, and protect tools and equipment.
Food Industry Penetrating Lubricants for Chain
For use in food-processing and preparation areas, use these lubricants to cut through dirt, grease, and rust, and to protect chain and other moving metal parts.
Lubricants that are NSF registered H1 or that meet FDA Compliant 21 CFR 178.3570 are rated for incidental contact with food. Lubricants that are NSF registered H3 can have direct contact with food.
Thin lubricants penetrate into small crevices in chain. Thick lubricants are tacky to stay in place at high speeds.
Lubricants that cannot be sold to the listed regions are restricted by local chemical regulations, including limits on VOCs (volatile organic compounds).
Container | ||||||||
---|---|---|---|---|---|---|---|---|
Size | Net Weight | Type | Consistency | Temp. Range, °F | Specifications Met | Cannot Be Sold To | Each | |
__ | 13 1/2 oz. | Aerosol Can | Thin Liquid | 0° to 150° | FDA Compliant 21 CFR 178.3570, NSF Registered H1 | __ | 000000 | 000000 |
__ | 13 1/2 oz. | Aerosol Can | Thin Liquid | 10° to 280° | FDA Compliant 21 CFR 178.3570, NSF Registered H1 | CA, Canada | 0000000 | 00000 |
4 fl. oz. | __ | Squeeze Bottle | Thin Liquid | 20° to 280° | NSF Registered H3 | __ | 000000 | 0000 |
16 fl. oz. | __ | Bottle | Thin Liquid | 20° to 280° | NSF Registered H3 | __ | 000000 | 00000 |
32 fl. oz. | __ | Bottle | Thin Liquid | 20° to 280° | NSF Registered H3 | __ | 000000 | 00000 |
1 gal. | __ | Jug | Thin Liquid | 20° to 280° | NSF Registered H3 | __ | 000000 | 000000 |
5 gal. | __ | Pail | Thick Liquid | -15° to 460° | NSF Registered H1 | __ | 0000000 | 000000 |
5 gal. | __ | Pail | Thin Liquid | -15° to 410° | NSF Registered H1 | __ | 0000000 | 000000 |
Container | |||||||||
---|---|---|---|---|---|---|---|---|---|
Size | Net Weight | Type | Consistency | Temp. Range, °F | Specifications Met | Cannot Be Sold To | Pkg. Qty. | Pkg. | |
__ | 13 1/2 oz. | Aerosol Can | Thin Liquid | 0° to 150° | FDA Compliant 21 CFR 178.3570, NSF Registered H1 | __ | 12 | 00000000 | 0000000 |
__ | 13 1/2 oz. | Aerosol Can | Thin Liquid | 10° to 280° | FDA Compliant 21 CFR 178.3570, NSF Registered H1 | CA, Canada | 12 | 0000000 | 000000 |
4 fl. oz. | __ | Squeeze Bottle | Thin Liquid | 20° to 280° | NSF Registered H3 | __ | 6 | 00000000 | 00000 |
16 fl. oz. | __ | Bottle | Thin Liquid | 20° to 280° | NSF Registered H3 | __ | 12 | 00000000 | 000000 |
32 fl. oz. | __ | Bottle | Thin Liquid | 20° to 280° | NSF Registered H3 | __ | 12 | 00000000 | 000000 |
1 gal. | __ | Jug | Thin Liquid | 20° to 280° | NSF Registered H3 | __ | 4 | 00000000 | 000000 |
Biodegradable Food Industry Penetrating Lubricants for Chain
Protect chain and other moving metal parts found in food-processing and preparation equipment while limiting environmental impact. These lubricants are NSF registered H1 for incidental food contact and are considered Environmentally Acceptable Lubricants (EAL) by the EPA’s Vessel General Permit. To qualify as an EAL, a lubricant must be able to quickly break down in water. Use them to cut through dirt, grease, and rust, and to protect metal surfaces.
Food Industry Dry-Film Lubricants
Use these NSF registered H1 lubricants in food-processing and preparation areas with a risk of incidental food contact. They form a nonstick film that won't attract contaminants, such as flour.
Lubricants with silicone can be used with plastic. Lubricants with PTFE have small particles of PTFE that fill in surface imperfections for excellent lubricity.
Lubricants cannot be sold to the listed areas due to product regulations.
Container | |||||||
---|---|---|---|---|---|---|---|
Net Weight, oz. | Type | Additive | Temp. Range, °F | Specifications Met | Cannot Be Sold To | Each | |
Sprayon LU 211 Food Grade Dry Silicone | |||||||
13 1/4 | Aerosol Can | Silicone | -40° to 450° | FDA Compliant 21 CFR 178.3570, NSF Registered H1 | __ | 0000000 | 000000 |
Lubricants | |||||||
5 1/4 | Aerosol Can | PTFE | -40° to 500° | FDA Compliant 21 CFR 178.3570, NSF Registered H1 | CA, NY | 0000000 | 00000 |
11 | Aerosol Can | PTFE | -40° to 500° | FDA Compliant 21 CFR 178.3570, NSF Registered H1 | CA, NY | 0000000 | 00000 |
Container | ||||||||
---|---|---|---|---|---|---|---|---|
Net Weight, oz. | Type | Additive | Temp. Range, °F | Specifications Met | Cannot Be Sold To | Pkg. Qty. | Pkg. | |
Sprayon LU 211 Food Grade Dry Silicone | ||||||||
13 1/4 | Aerosol Can | Silicone | -40° to 450° | FDA Compliant 21 CFR 178.3570, NSF Registered H1 | __ | 12 | 0000000 | 0000000 |
Lubricants | ||||||||
5 1/4 | Aerosol Can | PTFE | -40° to 500° | FDA Compliant 21 CFR 178.3570, NSF Registered H1 | CA, NY | 12 | 0000000 | 000000 |
11 | Aerosol Can | PTFE | -40° to 500° | FDA Compliant 21 CFR 178.3570, NSF Registered H1 | CA, NY | 12 | 00000000 | 000000 |