Nickel-plated steel has some corrosion resistance.

Made of yellow zinc-plated steel, these metric leveling mounts are more corrosion resistant than nickel-plated steel leveling mounts.

An economical choice for applications in corrosive environments that don't require high load capacities, these mounts have a plastic base.

Made of 303 stainless steel, these metric mounts resist corrosion from water and most chemicals.

Made entirely of 316 stainless steel, these metric mounts have superior corrosion resistance.

Punch-out holes in the base let you bolt down these mounts to keep your equipment stationary.

Well-suited to damp environments, these mounts have a stainless steel stud and nut for corrosion resistance.

An offset mounting hole allows for installation without moving your machine.

Nickel-plated steel has some corrosion resistance.

Black-oxide steel has a dull shine for areas where appearance is a concern.

Made of 303 stainless steel, these metric mounts resist corrosion from water and most chemicals.

Punch-out holes in the base let you bolt down these mounts to keep your equipment stationary.

Use these mounts on heavy machines and equipment.

Made of 303 stainless steel, these mounts resist corrosion from water and most chemicals.

A hex nut at the base of the stud allows for easy height adjustment.

A shield on the stud prevents dirt accumulation on the threads and provides a finished appearance.

Able to withstand temperatures up to 350° F, these have the highest maximum temperature of our plastic mounts.

These mounts have a cushion on top to provide padding between your furniture and the mount.

Cover the bottom of furniture legs.

Made of neoprene rubber, these feet are a good choice for use in oily environments.

These feet are made of UHMW polyethylene plastic, so they won’t dry out and become brittle.

Great as nonslip feet, thread these rubber suction cups to the bottom of your lightweight equipment.

Press these feet into tubular legs of tables, chairs, and other furniture.

Place these feet under furniture and equipment.

An integral cushion reduces noise and vibration.

Rated for high load capacity, use these inserts to connect threaded leveling mounts to heavy equipment.

Slip these inserts into tubular legs to quickly add threads for attaching leveling mounts. They’re often used in the legs of light equipment and furniture.

All-stainless steel construction stands up to water and chemicals and won't rust or corrode.

Higher deflection ratings translate to greater vibration and shock isolation.

Higher deflection ratings translate to greater vibration and shock isolation than our other vibration-damping leveling mounts.

A two-piece design simplifies installation and requires less clearance than one-piece mounts.

All of these bumpers are reinforced with an embedded washer or base plate for strength. Often used as feet, spacers, and vibration dampers, they absorb shock to prevent damage to equipment and surfaces. They're also good for starting and stopping motion on automated machines. Install them with screws.

These nonslip bumpers protect equipment while minimizing the movement of objects that come in contact, making them good for positioning and robotic-gripping applications. Install them with adhesives or screws.

Select these bumpers for applications that require specific load capacities. Often used as feet, spacers, and vibration dampers, they absorb shock to prevent damage to equipment and surfaces. They're also good for starting and stopping motion on automated machines and conveyors. Install them with a screw.

All of these bumpers are reinforced with a steel core for strength. Often used as feet, spacers, and vibration dampers, they absorb shock to prevent damage to equipment and surfaces. They're also good for starting and stopping motion on automated machines. Twist them into a threaded hole.

These bumpers withstand temperatures up to 300° F, which is twice as high as our other load rated bumpers. Use them in applications that require specific load capacities. All are reinforced with a base plate for strength. Often used as feet, spacers, and vibration dampers, these bumpers absorb shock to prevent damage to equipment and surfaces. They're also good for starting and stopping motion on automated machines and conveyors. Twist them into a threaded hole.

Select these bumpers for applications that require specific load capacities. All are reinforced with a base plate for strength. Often used as feet, spacers, and vibration dampers, they absorb shock to prevent damage to equipment and surfaces. They're also good for starting and stopping motion on automated machines and conveyors. Mount these bumpers on a threaded stud.

Push the stem into a hole for quick installation. These bumpers are commonly used as feet on instruments and bench-top equipment to keep them from sliding. They're also good as spacers between sheets of material. Also known as stem and grommet bumpers.

The stem on these bumpers compresses to fit into tight holes. Push the stem into a hole for quick installation. These bumpers are commonly used as feet on instruments and bench-top equipment to keep them from sliding. They're also good as spacers between sheets of material. Also known as stem and grommet bumpers.

Select these bumpers for applications that require specific load capacities. Use them as feet and spacers on instruments and small appliances to limit sliding, vibration, and noise. Press them into place with the adhesive backing. They're comparable to Bumpon bumpers.

Install with a few taps of a hammer. In addition to protecting soft materials such as wood, fiberboard, and plastic, these bumpers are commonly used on table and chair legs to safeguard floors.

Wear over mid-calf and knee-high boots. They protect boots from water, wear, and abrasion.

These boot covers are made of PVC to hold up in wet and oily environments.

These covers are rated ASTM F2413 for protection against electrical hazards.

Taller than shoe covers, boot covers protect mid-calf and knee-high boots. They are lightweight and protect boots from dirt, grime, and liquid splashes.

Step into the dispenser and this plastic film clings to the bottom of your shoes and boots, so you don’t track dirt into your home or worksite.

Keep dust and other particles on your shoes from contaminating clean rooms.

Apply and remove Clean Room Shoe Covers without bending down and contaminating your hands.

Boots extend above the ankle to provide more coverage than shoes. They protect your feet against workplace hazards, such as accidental impacts, water, and oil.

Keep feet warm and dry in frigid temperatures with these insulated boots.

Use these waders to stay dry when you’re in deep water, mud, and sludge.

Shield toes and feet from accidental impact.

Extend the life of your footwear with these abrasion- and water-resistant epoxies.

These abrasion-, tear-, and cut-resistant leggings protect your lower legs and feet against radiant heat, flames, and welding sparks.

Add mounting feet and casters to T-slotted framing structures to level equipment, anchor legs to the floor, or add mobility.

Rails are drilled with consistently spaced holes for multiple mounting options that do not require machining. Use this steel bolt-together framing to build guards, tables, and racks.

No need for fasteners—friction holds this framing together. Use press-fit framing and fittings to assemble carts, enclosures, and partitions.

Replace worn out shoes on straight and extension ladders.

Replace worn out shoes on step ladders.

Bolt these pads into a ladder's front legs to add slip resistance.

Attach to the footwear of personnel who need to walk on a conductive floor