UL Listed Fume Exhausters

Filter by

Voltage

Inlet Diameter

For Duct Diameter

Outlet Diameter

Hazardous Location Protection Type

Dust-Ignition Proof

Explosion Proof

Special Protection

Airflow @ Static Pressure

450 ft³/min @ 0 in. H₂O

115 ft³/min @ 1/8 in. H₂O

135 ft³/min @ 1/8 in. H₂O

150 ft³/min @ 1/8 in. H₂O

168 ft³/min @ 1/8 in. H₂O

255 ft³/min @ 1/8 in. H₂O

280 ft³/min @ 1/8 in. H₂O

300 ft³/min @ 1/8 in. H₂O

308 ft³/min @ 1/8 in. H₂O

425 ft³/min @ 1/8 in. H₂O

480 ft³/min @ 1/8 in. H₂O

570 ft³/min @ 1/8 in. H₂O

700 ft³/min @ 1/8 in. H₂O

1,600 ft³/min @ 1/8 in. H₂O

2,000 ft³/min @ 1/8 in. H₂O

2,700 ft³/min @ 1/8 in. H₂O

3,200 ft³/min @ 1/8 in. H₂O

3,400 ft³/min @ 1/8 in. H₂O

Power

Material

Environment

Mounting Location

Housing Material

Electrical Phase

Electrical Connection Type

Current

Hazardous Location Rating

NEC Class I Divisions 1, 2 Groups C, D

NEC Class I Divisions 1, 2 Group D

NEC Class II Divisions 1, 2 Groups E, F, G

NEC Class II Divisions 1, 2 Groups F, G

NEC Class II Division 2 Groups F, G

Power Source

Electric

Certification

C-UL Listed

C-UL Recognized Component

UL Recognized Component

Outlet Shape

Width

Overall Height

Motor Speed

Overall Width

Export Control Classification Number (ECCN)

EAR99

DFARS Specialty Metals

Exempt

RoHS

Compliant

Compliant with Exemptions

REACH

76 Products

Wall-Mount Hazardous Location Fume Exhausters

This fume exhauster has a motor that is UL listed for Class I, Divisions 1 and 2, Groups C and D; and Class II, Divisions 1 and 2, Groups E, F, and G locations. Use it to remove fumes, vapors, and fine dust particles from your space. It is commonly used in welding, soldering, and other operations that create fumes.

Airflow @ Static Pressure—Airflow depends on the resistance created by ductwork. This resistance, known as static pressure (SP), is measured in inches of water.

					Overall						Mounting
Airflow @ SP	Volume (Sound) @ Distance	Power, hp	Inlet Dia.	Outlet Dia.	Ht.	Wd.	Dp.	Housing Material	Base Material	Wheel Material	Fasteners Included	For Screw Size	Hole Dia.	No. of Holes	Hazardous Location Rating		Each







			120V AC—Hardwire

			300 ft³/min @ 1/2 in. H₂O	61 dBC @ 15 ft.	1/4	4"	4"	16"	17 5/8"	8 7/8"	Galvanized Steel	Steel	Aluminum	No	1/4"	9/32"	4	NEC Class I Divisions 1, 2 Groups C, D NEC Class II Divisions 1, 2 Groups E, F, G	000000	000000000

Floor-Mount Hazardous Location Fume Exhausters

Airflow @ Static Pressure—Airflow depends on the resistance created by ductwork. This resistance, known as static pressure (SP), is measured in inches of water.

					Overall						Mounting
Airflow @ SP	Volume (Sound) @ Distance	Power, hp	Inlet Dia.	Outlet Dia.	Ht.	Wd.	Dp.	Housing Material	Base Material	Wheel Material	Fasteners Included	For Screw Size	Hole Dia.	No. of Holes	Hazardous Location Rating		Each







			120V AC—Hardwire

			800 ft³/min @ 1/2 in. H₂O	65 dBC @ 15 ft.	1/3	6"	6"	15 1/8"	18 1/4"	20 3/8"	Galvanized Steel	Steel	Aluminum	No	1/4"	9/32"	4	NEC Class I Divisions 1, 2 Groups C, D NEC Class II Divisions 1, 2 Groups E, F, G	000000	000000000

Direct-Drive Corrosion-Resistant Duct Fans

A galvanized steel housing offers good corrosion resistance. All of these direct-drive fans have fewer moving parts than belt-drive fans for less maintenance. Also known as axial duct fans, they install inline in ductwork for use as an exhaust, supply, or booster fan. The fans have a totally enclosed motor enclosure, which can be used in dirty, dusty, and damp environments.

Note: Airflow depends on the resistance created by ductwork. This resistance, known as static pressure (SP), is measured in inches of water.

							Overall
	For Duct Dia.	No. of Speeds	Airflow @ SP	Volume (Sound) @ Distance	Motor Speed, rpm	Power, hp	Dia.	Ht.	Dp.	Max. Temp., ° F	Housing Material	Blade Material	Certification		Each
120V AC, Single Phase—Hardwire



		4"	1	90 ft³/min @ 3/8 in. H₂O 115 ft³/min @ 1/8 in. H₂O	Not Rated	3,000	1/40	8 3/4"	10 3/4"	6 1/2"	140	Galvanized Steel	Polypropylene	C-UL Listed, UL Listed	0000000	0000000


		5"	1	105 ft³/min @ 3/8 in. H₂O 135 ft³/min @ 1/8 in. H₂O	Not Rated	3,000	1/40	8 3/4"	10 3/4"	5 1/2"	140	Galvanized Steel	Polypropylene	C-UL Listed, UL Listed	0000000	000000
		6"	1	240 ft³/min @ 3/8 in. H₂O 280 ft³/min @ 1/8 in. H₂O	Not Rated	2,700	1/10	11 3/8"	13 3/8"	6"	140	Galvanized Steel	Polypropylene	C-UL Listed, UL Listed	0000000	000000
		8"	1	360 ft³/min @ 3/8 in. H₂O 425 ft³/min @ 1/8 in. H₂O	Not Rated	2,550	1/6	13 3/8"	15 3/8"	6"	140	Galvanized Steel	Polypropylene	C-UL Listed, UL Listed	0000000	000000
		8"	1	435 ft³/min @ 3/8 in. H₂O 480 ft³/min @ 1/8 in. H₂O	Not Rated	2,950	1/5	13 3/8"	15 3/8"	6"	140	Galvanized Steel	Polypropylene	C-UL Listed, UL Listed	0000000	000000
		10"	1	540 ft³/min @ 3/8 in. H₂O 570 ft³/min @ 1/8 in. H₂O	Not Rated	3,100	1/4	13 3/8"	15 3/8"	5 7/8"	140	Galvanized Steel	Polypropylene	C-UL Listed, UL Listed	0000000	000000
		12"	1	620 ft³/min @ 3/8 in. H₂O 700 ft³/min @ 1/8 in. H₂O	Not Rated	2,600	1/4	16"	18"	8 1/4"	140	Galvanized Steel	Polypropylene	C-UL Listed, UL Listed	0000000	000000


		120V AC, Single Phase—Plug In



				4"	1	90 ft³/min @ 3/8 in. H₂O 115 ft³/min @ 1/8 in. H₂O	Not Rated	3,000	1/40	8 3/4"	10 3/4"	6 1/2"	140	Galvanized Steel	Polypropylene	C-UL Listed, UL Listed	0000000	000000


				5"	1	105 ft³/min @ 3/8 in. H₂O 135 ft³/min @ 1/8 in. H₂O	Not Rated	3,000	1/40	8 3/4"	10 3/4"	5 1/2"	140	Galvanized Steel	Polypropylene	C-UL Listed, UL Listed	0000000	000000
				8"	1	360 ft³/min @ 3/8 in. H₂O 425 ft³/min @ 1/8 in. H₂O	Not Rated	2,550	1/6	13 3/8"	15 3/8"	6"	140	Galvanized Steel	Polypropylene	C-UL Listed, UL Listed	0000000	000000
				8"	1	435 ft³/min @ 3/8 in. H₂O 480 ft³/min @ 1/8 in. H₂O	Not Rated	2,950	1/5	13 3/8"	15 3/8"	6"	140	Galvanized Steel	Polypropylene	C-UL Listed, UL Listed	0000000	000000
				10"	1	540 ft³/min @ 3/8 in. H₂O 570 ft³/min @ 1/8 in. H₂O	Not Rated	3,100	1/4	13 3/8"	15 3/8"	5 7/8"	140	Galvanized Steel	Polypropylene	C-UL Listed, UL Listed	0000000	000000

Suspended-Hood Hazardous Location Fume Exhausters

Position these exhausters above drums, tanks, and distillers to remove fumes, vapors, and fine dust particles from your space. All have a motor that is UL listed for Class I, Divisions 1 and 2, Groups C and D; and Class II, Divisions 1 and 2, Groups F and G locations. Exhausters include a pulley system to adjust the hood height. Add an optional fume exhauster mounting bracket (sold separately) for side-to-side movement.

Airflow @ Static Pressure—Airflow depends on the resistance created by ductwork. This resistance, known as static pressure (SP), is measured in inches of water.

Fume Exhausters											Fume Exhauster Mounting Brackets
				Hose
Hood Dia.	Airflow @ SP	Volume (Sound) @ Distance	Power, hp	ID	Lg., ft.	Includes	Hazardous Location Rating	Enclosure Rating		Each		Each







			120V AC/230V AC—Hardwire

			27"	450 ft³/min @ 0 in. H₂O	69 dB @ 5 ft.	1/2	6"	10	Blower, Outside Vent Kit	NEC Class I Divisions 1, 2 Groups C, D NEC Class II Divisions 1, 2 Groups F, G	IP54	00000000	000000000	00000000	0000000


			32"	450 ft³/min @ 0 in. H₂O	69 dB @ 5 ft.	1/2	6"	10	Blower, Outside Vent Kit	NEC Class I Divisions 1, 2 Groups C, D NEC Class II Divisions 1, 2 Groups F, G	IP54	00000000	00000000	00000000	000000
			37"	450 ft³/min @ 0 in. H₂O	69 dB @ 5 ft.	1/2	6"	10	Blower, Outside Vent Kit	NEC Class I Divisions 1, 2 Groups C, D NEC Class II Divisions 1, 2 Groups F, G	IP54	00000000	00000000	00000000	000000
			44"	450 ft³/min @ 0 in. H₂O	69 dB @ 5 ft.	1/2	6"	10	Blower, Outside Vent Kit	NEC Class I Divisions 1, 2 Groups C, D NEC Class II Divisions 1, 2 Groups F, G	IP54	00000000	00000000	00000000	000000

Hazardous Location Spark-Resistant Blowers

These blowers have an explosion-proof motor that is UL listed for hazardous locations. They also have an aluminum housing for spark resistance. These blowers install in ductwork similar to duct fans, but are for use where high static pressures are present. Use them for equipment cooling, material conveying, drying, ventilating, and exhausting.

Note: Airflow depends on the resistance created by ductwork. This resistance, known as static pressure (SP), is measured in inches of water. It is the responsibility of users in California to follow local energy efficiency regulations. Operating these blowers at a high airflow may violate these regulations.

With Round Outlet and Round Inlet

Image of Product. Front orientation. Blowers. Hazardous Location Spark-Resistant Blowers.

								Overall								Mounting
	Airflow @ SP	Volume (Sound) @ Distance	Motor Speed, rpm	Power, hp	Outlet Dia.	Inlet Dia.	Wheel Dia.	Ht.	Wd.	Dp.	Current	Temp. Range, ° F	Housing Material	Hazardous Location Rating	Enclosure Rating	Fasteners Included	Hole Dia.		Each
120V AC/230V AC







				Single Phase—Hardwire

				295 ft³/min @ 1 in. H₂O 505 ft³/min @ 1/4 in. H₂O	55 dBA @ 15 ft.	1,750	1/3	6"	6"	6 1/4"	14 1/8"	12 1/4"	13 1/4"	6.0 amp/3.0 amp	0 to 150	Aluminum	NEC Class I Divisions 1, 2 Group D NEC Class II Divisions 1, 2 Groups F, G	IP44	No	7/16"	0000000	000000000


				320 ft³/min @ 1 in. H₂O 375 ft³/min @ 1/4 in. H₂O	60 dBA @ 15 ft.	3,450	1/3	4"	5"	4 3/4"	12 5/8"	9 7/8"	12 1/4"	7.0 amp/3.5 amp	0 to 150	Aluminum	NEC Class I Divisions 1, 2 Group D NEC Class II Divisions 1, 2 Groups F, G	IP44	No	7/16"	0000000	00000000
				995 ft³/min @ 1 in. H₂O 1,070 ft³/min @ 1/4 in. H₂O	70 dBA @ 15 ft.	3,450	1 1/2	6"	6"	6 1/4"	14 1/8"	12 1/4"	13 1/4"	15.4 amp/8.4 amp	0 to 150	Aluminum	NEC Class I Divisions 1, 2 Groups C, D NEC Class II Divisions 1, 2 Groups F, G	IP54	No	7/16"	0000000	00000000
				1,045 ft³/min @ 1/4 in. H₂O	55 dBA @ 15 ft.	1,150	1/3	8"	8"	8 1/4"	18 3/4"	14 3/4"	15 3/8"	6.8 amp/3.4 amp	0 to 150	Aluminum	NEC Class I Divisions 1, 2 Group D NEC Class II Divisions 1, 2 Groups F, G	IP44	No	7/16"	0000000	00000000

High-Output Hazardous Location Spark-Resistant Blowers

Powerful and durable, these blowers are able to blow air through larger systems that have more airflow resistance than standard hazardous location spark-resistant blowers can handle. They have an explosion-proof motor that is UL listed for hazardous locations. They also have an aluminum housing for spark resistance. These blowers install in ductwork similar to duct fans, but are for use where high static pressures are present. Use them for equipment cooling, material conveying, drying, ventilating, and exhausting.

With Round Outlet and Round Inlet

Image of Product. Front orientation. Blowers. High-Output Hazardous Location Spark-Resistant Blowers.

								Overall								Mounting
	Airflow @ SP	Volume (Sound) @ Distance	Motor Speed, rpm	Power, hp	Outlet Dia.	Inlet Dia.	Wheel Dia.	Ht.	Wd.	Dp.	Wt., lb.	Current	Temp. Range, ° F	Housing Material	Hazardous Location Rating	Fasteners Included	Hole Dia.		Each
120V AC/230V AC







				Single Phase—Hardwire

				130 ft³/min @ 3 in. H₂O	75 dBA @ 15 ft.	3,450	1/3	4"	4"	7"	13 5/8"	14 3/4"	12 1/8"	56	7.0 amp/3.5 amp	0 to 100	Aluminum	NEC Class I Divisions 1, 2 Groups C, D NEC Class II Divisions 1, 2 Groups E, F, G	No	7/16"	0000000	000000000


				250 ft³/min @ 3 in. H₂O	75 dBA @ 15 ft.	3,450	1/2	4"	4"	8 1/8"	13 5/8"	14 3/4"	12 1/8"	49	7.4 amp/3.7 amp	0 to 100	Aluminum	NEC Class I Divisions 1, 2 Groups C, D NEC Class II Divisions 1, 2 Groups E, F, G	No	7/16"	0000000	00000000
				400 ft³/min @ 3 in. H₂O	70 dBA @ 15 ft.	3,450	3/4	4"	5"	10 1/4"	17 1/16"	14 11/16"	17 3/16"	76	10.4 amp/5.2 amp	-10 to 150	Aluminum	NEC Class I Divisions 1, 2 Groups C, D NEC Class II Divisions 1, 2 Groups F, G	No	7/16"	00000000	00000000
				460 ft³/min @ 5 in. H₂O 520 ft³/min @ 3 in. H₂O	80 dBA @ 15 ft.	3,450	1	5"	6"	9 3/4"	18"	14 1/2"	16 1/8"	80	12.0 amp/6.0 amp	0 to 100	Aluminum	NEC Class I Divisions 1, 2 Groups C, D NEC Class II Divisions 1, 2 Groups E, F, G	No	7/16"	0000000	00000000
				530 ft³/min @ 5 in. H₂O 685 ft³/min @ 3 in. H₂O	80 dBA @ 15 ft.	3,450	1 1/2	5"	6"	10 5/8"	18"	14 1/2"	16 1/8"	88	15.0 amp/7.5 amp	0 to 100	Aluminum	NEC Class I Divisions 1, 2 Groups C, D NEC Class II Divisions 1, 2 Groups E, F, G	No	7/16"	0000000	00000000
				850 ft³/min @ 3 in. H₂O	76 dBA @ 15 ft.	3,450	2	5"	6"	12"	18 1/4"	17 5/16"	17 7/16"	96	20.0 amp/10.0 amp	-10 to 150	Aluminum	NEC Class I Divisions 1, 2 Groups C, D NEC Class II Divisions 1, 2 Groups F, G	No	7/16"	00000000	00000000


				230V AC/460V AC







								Three Phase—Hardwire

								130 ft³/min @ 3 in. H₂O	64 dBA @ 15 ft.	3,450	1/3	4"	4"	7"	13 7/16"	11 3/8"	17 1/4"	57	1.0 amp/0.5 amp	-10 to 150	Aluminum	NEC Class I Divisions 1, 2 Groups C, D NEC Class II Divisions 1, 2 Groups F, G	No	7/16"	00000000	00000000


								250 ft³/min @ 3 in. H₂O	75 dBA @ 15 ft.	3,450	1/2	4"	4"	8 1/8"	13 5/8"	14 3/4"	12 1/8"	47	2.2 amp/1.1 amp	0 to 100	Aluminum	NEC Class I Divisions 1, 2 Groups C, D NEC Class II Divisions 1, 2 Groups E, F, G	No	7/16"	0000000	00000000
								400 ft³/min @ 3 in. H₂O	70 dBA @ 15 ft.	3,450	3/4	4"	5"	10 1/4"	17 1/16"	14 11/16"	17 3/16"	69	2.3 amp/1.2 amp	-10 to 150	Aluminum	NEC Class I Divisions 1, 2 Groups C, D NEC Class II Divisions 1, 2 Groups F, G	No	7/16"	00000000	00000000
								460 ft³/min @ 5 in. H₂O 520 ft³/min @ 3 in. H₂O	80 dBA @ 15 ft.	3,450	1	5"	6"	9 3/4"	18"	14 1/2"	16 1/8"	65	3.6 amp/1.8 amp	0 to 100	Aluminum	NEC Class I Divisions 1, 2 Groups C, D NEC Class II Divisions 1, 2 Groups E, F, G	No	7/16"	0000000	00000000
								530 ft³/min @ 5 in. H₂O 685 ft³/min @ 3 in. H₂O	80 dBA @ 15 ft.	3,450	1 1/2	5"	6"	10 5/8"	18"	14 1/2"	16 1/8"	73	3.8 amp/1.9 amp	0 to 100	Aluminum	NEC Class I Divisions 1, 2 Groups C, D NEC Class II Divisions 1, 2 Groups E, F, G	No	7/16"	0000000	00000000
								850 ft³/min @ 3 in. H₂O	76 dBA @ 15 ft.	3,450	2	5"	6"	12"	19 11/16"	17 5/16"	17 7/16"	126	2.3 amp/1.2 amp	-10 to 150	Aluminum	NEC Class I Divisions 1, 2 Groups C, D NEC Class II Divisions 1, 2 Groups F, G	No	7/16"	00000000	00000000
								1,090 ft³/min @ 3 in. H₂O	71 dBA @ 15 ft.	3,450	3	6"	7"	11 1/2"	21 5/16"	18 1/2"	21 3/4"	167	7.5 amp/3.8 amp	-10 to 150	Aluminum	NEC Class I Divisions 1, 2 Groups C, D NEC Class II Divisions 1, 2 Groups F, G	No	7/16"	00000000	00000000
								1,400 ft³/min @ 3 in. H₂O	74 dBA @ 15 ft.	3,450	5	6"	7"	13"	21 5/16"	18 1/2"	21 3/4"	183	12.2 amp/6.1 amp	-10 to 150	Aluminum	NEC Class I Divisions 1, 2 Groups C, D NEC Class II Divisions 1, 2 Groups F, G	No	7/16"	00000000	00000000
								1,890 ft³/min @ 3 in. H₂O	76 dBA @ 15 ft.	3,450	5	8"	8"	14"	26 5/8"	22 3/16"	24 7/16"	234	12.2 amp/6.1 amp	-10 to 150	Aluminum	NEC Class I Divisions 1, 2 Groups C, D NEC Class II Divisions 1, 2 Groups F, G	No	7/16"	00000000	00000000

Direct-Drive Duct Fans

Direct-drive fans have fewer moving parts than belt-drive fans for less maintenance. Also known as axial duct fans, these install inline in ductwork for use as an exhaust, supply, or booster fan. All fans have a totally enclosed motor enclosure, which can be used in dirty, dusty, and damp environments.

Note: Airflow depends on the resistance created by ductwork. This resistance, known as static pressure (SP), is measured in inches of water.

							Overall							Mounting
	For Duct Dia.	No. of Speeds	Airflow @ SP	Volume (Sound) @ Distance	Motor Speed, rpm	Power, hp	Dia.	Ht.	Dp.	Max. Temp., ° F	Housing Material	Blade Material	Certification	Hardware Included	Hole Dia.		Each
120V AC, Single Phase—Hardwire



		4"	1	95 ft³/min @ 3/8 in. H₂O 135 ft³/min @ 1/8 in. H₂O	Not Rated	3,050	1/40	9 1/2"	9 1/2"	9 5/8"	140	ABS/Polycarbonate	Nylon	C-UL Listed, UL Listed	Yes	1/4"	00000000	0000000


		4"	1	143 ft³/min @ 3/8 in. H₂O 168 ft³/min @ 1/8 in. H₂O	Not Rated	2,450	1/9	10"	10 1/2"	10 9/16"	140	ABS/Polycarbonate	Nylon	C-UL Listed, UL Listed	Yes	1/4"	000000000	000000
		5"	1	105 ft³/min @ 3/8 in. H₂O 150 ft³/min @ 1/8 in. H₂O	Not Rated	3,050	1/40	9 1/2"	9 1/2"	7 7/8"	140	ABS/Polycarbonate	Nylon	C-UL Listed, UL Listed	Yes	1/4"	00000000	000000
		6"	1	201 ft³/min @ 3/8 in. H₂O 255 ft³/min @ 1/8 in. H₂O	Not Rated	2,450	1/12	11 5/8"	12 1/8"	9 7/32"	140	ABS/Polycarbonate	Nylon	C-UL Listed, UL Listed	Yes	1/4"	000000000	000000
		6"	1	250 ft³/min @ 3/8 in. H₂O 308 ft³/min @ 1/8 in. H₂O	Not Rated	2,150	1/6	11 5/8"	12 1/8"	9 7/32"	140	ABS/Polycarbonate	Nylon	C-UL Listed, UL Listed	Yes	1/4"	000000000	000000
		6"	1	250 ft³/min @ 3/8 in. H₂O 300 ft³/min @ 1/8 in. H₂O	Not Rated	2,450	1/10	11 3/4"	11 3/4"	9 5/8"	140	ABS/Polycarbonate	Nylon	C-UL Listed, UL Listed	Yes	1/4"	00000000	000000

Belt-Drive Hazardous Location Duct Fans

These fans have an explosion-proof motor that is rated for hazardous environments. All are belt-drive fans that are quieter and have a longer life span than direct-drive fans because components can be replaced if worn or damaged. They install inline in ductwork for use as an exhaust, supply, or booster fan. UL and CSA standards apply to the motor.

Note: Airflow depends on the resistance created by ductwork. This resistance, known as static pressure (SP), is measured in inches of water.

IP44 Enclosure Rating—Fans rated IP44 have a motor enclosure that's rated for protection in damp environments.

IP56 Enclosure Rating— Fans rated IP56 have a motor enclosure that’s rated for protection in damp, dusty, and washdown environments.

							Overall							Mounting
	For Duct Dia.	No. of Speeds	Airflow @ SP	Volume (Sound) @ Distance	Motor Speed, rpm	Power, hp	Dia.	Ht.	Dp.	Max. Temp., ° F	Housing Material	Blade Material	Certification	Fasteners Included	Hole Dia.		Each
120V AC, 230V AC, Single Phase—Hardwire







				IP44 Enclosure Rating

				12"	1	1,400 ft³/min @ 3/8 in. H₂O 1,600 ft³/min @ 1/8 in. H₂O	65 dBA @ 15 ft.	3,025	1/2	14 1/16"	23 7/16"	12"	175	Steel	Aluminum	UL Listed, UL Recognized Component, CSA Certified	No	7/16"	0000000	000000000


				15"	1	2,800 ft³/min @ 3/8 in. H₂O 3,200 ft³/min @ 1/8 in. H₂O	65 dBA @ 15 ft.	2,275	3/4	17 1/16"	26 15/16"	12"	175	Steel	Aluminum	UL Listed, UL Recognized Component, CSA Certified	No	7/16"	0000000	00000000
				18"	1	2,500 ft³/min @ 3/8 in. H₂O 3,400 ft³/min @ 1/8 in. H₂O	60 dBA @ 15 ft.	1,600	1/2	20 1/16"	30 3/16"	12"	175	Steel	Aluminum	UL Listed, UL Recognized Component, CSA Certified	No	7/16"	0000000	00000000


				230V AC, 460V AC, Three Phase—Hardwire







								IP44 Enclosure Rating

								36"	1	13,300 ft³/min @ 3/8 in. H₂O 15,200 ft³/min @ 1/8 in. H₂O	65 dBA @ 15 ft.	1,000	2	39 1/4"	49 1/4"	16"	175	Steel	Aluminum	UL Listed, UL Recognized Component, CSA Energy Verified, CSA Certified	No	7/16"	0000000	00000000




										IP56 Enclosure Rating

										24"	1	7,000 ft³/min @ 3/8 in. H₂O 7,900 ft³/min @ 1/8 in. H₂O	70 dBA @ 15 ft.	1,800	1 1/2	26 11/16"	36 11/16"	12"	175	Steel	Aluminum	UL Listed	No	7/16"	0000000	00000000

Hazardous Location Chemical-Resistant Blowers

These blowers have an explosion-proof motor that is UL listed and CSA certified for Class I, Divisions 1 and 2, Group D; and Class II, Divisions 1 and 2, Groups F and G hazardous locations. For resistance to chemicals as well as corrosion, they have a plastic housing. They install in ductwork similar to duct fans, but are for use where high static pressures are present. Use them for equipment cooling, material conveying, drying, ventilating, and exhausting. All blowers have a totally enclosed motor enclosure, which can be used in dirty, dusty, and wet environments.

Note: Airflow depends on the resistance created by ductwork. This resistance, known as static pressure (SP), is measured in inches of water.

With Round Outlet and Round Inlet


	Replacement Wheels

Fiberglass Housing—Fiberglass housing withstands organic chemicals, such as ammonia, antifreeze, and mineral oils.

PVC Housing—PVC housing offers greater chemical resistance than the fiberglass housing. It resists strong oxidizing acids such as sulfuric acid but will not withstand contact with perchloric acid.

	Blowers																	Replacement Wheels
								Overall						Mounting
	Airflow @ SP	Volume (Sound) @ Distance	Motor Speed, rpm	Power, hp	Outlet Dia.	Inlet Dia.	Wheel Dia.	Ht.	Wd.	Dp.	Current	Housing Material	Hazardous Location Rating	Fasteners Included	Hole Dia.		Each		Each
120V AC







				Single Phase—Hardwire

				185 ft³/min @ 1/2 in. H₂O	Not Rated	1,725	1/6	5"	6"	5 11/16"	12 1/4"	11"	15 1/2"	1.9 amp	PVC	NEC Class I Divisions 1, 2 Group D NEC Class II Divisions 1, 2 Groups F, G	No	3/8"	0000000	000000000	00000000	0000000


				120V AC/230V AC







								Single Phase—Hardwire

								810 ft³/min @ 1 in. H₂O 960 ft³/min @ 1/2 in. H₂O	Not Rated	1,725	1/3	8"	8"	7"	16 3/4"	15 1/8"	21 1/2"	6.0 amp/3.0 amp	Fiberglass	NEC Class I Divisions 1, 2 Group D NEC Class II Divisions 1, 2 Groups F, G	No	3/8"	0000000	00000000	0000000	000000

With Rectangular Outlet and Round Inlet


	Replacement Wheels

Cannot Be Sold to California—Blowers that cannot be sold to the listed areas are restricted due to energy efficiency requirements.

	Blowers																			Replacement Wheels
					Outlet				Overall						Mounting
	Airflow @ SP	Volume (Sound) @ Distance	Motor Speed, rpm	Power, hp	Ht.	Wd.	Inlet Dia.	Wheel Dia.	Ht.	Wd.	Dp.	Current	Housing Material	Hazardous Location Rating	Fasteners Included	Hole Dia.	Cannot Be Sold To		Each		Each
230V AC/460V AC







				Three Phase—Hardwire

				2,300 ft³/min @ 1/2 in. H₂O 2,300 ft³/min @ 1 in. H₂O	Not Rated	1,725	1 1/2	9 3/8"	6 11/16"	10"	12"	24 1/4"	23"	24 1/4"	4.4 amp/2.2 amp	PVC	NEC Class I Divisions 1, 2 Group D NEC Class II Divisions 1, 2 Groups F, G	No	3/8"	California	0000000	000000000	0000000	000000000

Hazardous Location High-Output Portable Blowers

In addition to blowing twice as much air as other portable blowers, these have an explosion-proof motor that is UL listed for Class I, Divisions 1 and 2, Group D; and Class II, Divisions 1 and 2, Groups E, F, and G hazardous locations. They are powerful enough for use with flexible duct, yet light enough to carry from job to job. Use them for equipment cooling, material conveying, drying, ventilating, and exhausting. They rest on the floor with their built-in base or can be mounted on a stand (sold separately).

							Overall
	Airflow, ft³/min	Airflow @ Duct Lg.	Volume (Sound) @ Distance	Motor Speed, rpm	Power, hp	For Duct Dia.	Ht.	Wd.	Dp.	Current	Temp. Range, ° F	Housing Material	Blade Material	Hazardous Location Rating	Enclosure Rating		Each
120V AC







				Single Phase—Hardwire

				1,500	1,000 ft³/min @ 50 ft.	80 dBA @ 15 ft.	3,450	3/4	8"	13 3/4"	11 3/8"	39"	9.5 amp	-15 to 125	Aluminum	ABS	NEC Class I Divisions 1, 2 Group D NEC Class II Divisions 1, 2 Groups E, F, G	NEMA 7 NEMA 9	0000000	000000000


				3,000	2,300 ft³/min @ 50 ft.	85 dBA @ 15 ft.	3,450	1	12"	15 5/8"	13 1/4"	36"	12.4 amp	-15 to 125	Aluminum	Aluminum	NEC Class I Divisions 1, 2 Group D NEC Class II Divisions 1, 2 Groups E, F, G	NEMA 7 NEMA 9	0000000	00000000


				230V AC







								Single Phase—Hardwire

								3,000	2,300 ft³/min @ 50 ft.	85 dBA @ 15 ft.	3,450	1	12"	15 5/8"	13 1/4"	36"	6.2 amp	-15 to 125	Aluminum	Aluminum	NEC Class I Divisions 1, 2 Group D NEC Class II Divisions 1, 2 Groups E, F, G	NEMA 7 NEMA 9	0000000	00000000

Blower Stands

		Each
26" Stand	0000000	000000000

Direct-Drive Hazardous Location Duct Fans

These fans have an explosion-proof motor that is UL listed for Class I, Divisions 1 and 2, Group D; and Class II, Divisions 1 and 2, Groups F and G hazardous environments. All are direct-drive fans that have fewer moving parts than belt-drive fans for less maintenance. Also known as axial duct fans, they install inline in ductwork for use as an exhaust, supply, or booster fan. The fans have a TEFC (totally enclosed fan cooled) motor enclosure, which can be used in dirty, dusty, and damp environments.

Note: Airflow depends on the resistance created by ductwork. This resistance, known as static pressure (SP), is measured in inches of water.

							Overall							Mounting
	For Duct Dia.	No. of Speeds	Airflow @ SP	Volume (Sound) @ Distance	Motor Speed, rpm	Power, hp	Dia.	Ht.	Dp.	Max. Temp., ° F	Housing Material	Blade Material	Certification	Fasteners Included	Hole Dia.		Each
120V AC, 230V AC, Single Phase—Hardwire







				IP44 Enclosure Rating

				12"	1	1,900 ft³/min @ 3/8 in. H₂O 2,000 ft³/min @ 1/8 in. H₂O	70 dBA @ 15 ft.	3,450	1/2	14 1/16"	14 1/16"	20"	100	Steel	Aluminum	UL Listed, UL Recognized Component, CSA Certified	No	7/16"	0000000	000000000


				15"	1	2,100 ft³/min @ 3/8 in. H₂O 2,700 ft³/min @ 1/8 in. H₂O	60 dBA @ 15 ft.	1,750	1/2	17 1/16"	17 1/16"	20"	100	Steel	Aluminum	UL Listed, UL Recognized Component, CSA Certified	No	7/16"	0000000	00000000
				18"	1	3,900 ft³/min @ 3/8 in. H₂O 4,500 ft³/min @ 1/8 in. H₂O	65 dBA @ 15 ft.	1,750	3/4	20 1/16"	20 1/16"	20"	100	Steel	Aluminum	UL Listed, UL Recognized Component, CSA Certified	No	7/16"	0000000	00000000
				24"	1	4,900 ft³/min @ 3/8 in. H₂O 5,800 ft³/min @ 1/8 in. H₂O	65 dBA @ 15 ft.	1,750	3/4	26 11/16"	26 11/16"	21"	100	Steel	Aluminum	UL Listed, UL Recognized Component, CSA Certified	No	7/16"	0000000	00000000


				230V AC, 460V AC, Three Phase—Hardwire







								IP44 Enclosure Rating

								12"	1	1,900 ft³/min @ 3/8 in. H₂O 2,000 ft³/min @ 1/8 in. H₂O	70 dBA @ 15 ft.	3,450	1/2	14 1/16"	14 1/16"	20"	100	Steel	Aluminum	UL Listed, UL Recognized Component, CSA Certified	No	7/16"	0000000	00000000


								15"	1	2,100 ft³/min @ 3/8 in. H₂O 2,700 ft³/min @ 1/8 in. H₂O	60 dBA @ 15 ft.	1,750	1/2	17 1/16"	17 1/16"	20"	100	Steel	Aluminum	UL Listed, UL Recognized Component, CSA Certified	No	7/16"	0000000	00000000
								18"	1	3,900 ft³/min @ 3/8 in. H₂O 4,500 ft³/min @ 1/8 in. H₂O	60 dBA @ 15 ft.	1,750	3/4	20 1/16"	20 1/16"	20"	100	Steel	Aluminum	UL Listed, UL Recognized Component, CSA Certified	No	7/16"	0000000	00000000
								24"	1	4,900 ft³/min @ 3/8 in. H₂O 5,800 ft³/min @ 1/8 in. H₂O	65 dBA @ 15 ft.	1,750	3/4	26 11/16"	26 11/16"	21"	100	Steel	Aluminum	UL Listed, UL Recognized Component, CSA Certified	No	7/16"	0000000	00000000

High-Flow Low-Pressure Hazardous Location Compressed Air Blowers

Safely produce high-flow compressed air with low pressure or vacuum in environments with flammable gases and combustible dust, such as propane and carbon-based dust. These blowers have an explosion-proof motor and are UL listed for use in hazardous locations. Also known as regenerative blowers, they are commonly used to operate pump drives, lift tables, and conveying systems. They can also be used for drying, exhausting, and aerating.

Single Stage

Image of Product. Front orientation. Blowers. High-Flow Low-Pressure Hazardous Location Compressed Air Blowers.

							Overall				Pipe Size
	Max. Pressure	Max. Flow Rate @ Pressure	Vacuum Rating	Power, hp	Full Load Current @ Voltage	Volume (Sound), dBA	Lg.	Wd.	Ht.	Temp. Range, ° F	Inlet	Outlet	Hazardous Location Rating		Each
Three Phase, 208/230/460V AC (Inverter Rated)







				NPT Female Inlet and Outlet

				2 psi 50 in. H₂O	556 ft³/min @ 0 psi	3.7 in. Hg 50 in. H₂O	10	24.3 amp @ 208V AC 22.4 amp @ 230V AC 11.2 amp @ 460V AC	81	25"	20"	22"	5 to 100	4	4	NEC Class I Divisions 1, 2 Group D NEC Class II Division 2 Groups F, G	0000000	000000000


				2 psi 60 in. H₂O	471 ft³/min @ 0 psi	4.4 in. Hg 59 in. H₂O	10	24.3 amp @ 208V AC 22.4 amp @ 230V AC 11.2 amp @ 460V AC	81	25"	19"	22"	5 to 100	4	4	NEC Class I Divisions 1, 2 Group D NEC Class II Division 2 Groups F, G	0000000	00000000
				2 psi 68 in. H₂O	381 ft³/min @ 0 psi	5 in. Hg 67 in. H₂O	7 1/2	18.9 amp @ 208V AC 17.8 amp @ 230V AC 8.9 amp @ 460V AC	80	23"	18"	19"	5 to 100	3	3	NEC Class I Divisions 1, 2 Group D NEC Class II Division 2 Groups F, G	0000000	00000000
				4 psi 116 in. H₂O	294 ft³/min @ 0 psi	8.8 in. Hg 119 in. H₂O	7 1/2	18.9 amp @ 208V AC 17.8 amp @ 230V AC 8.9 amp @ 460V AC	80	23"	16"	19"	5 to 100	3	3	NEC Class I Divisions 1, 2 Group D NEC Class II Division 2 Groups F, G	0000000	00000000

Two Stage

							Overall				Pipe Size
	Max. Pressure	Max. Flow Rate @ Pressure	Vacuum Rating	Power, hp	Full Load Current @ Voltage	Volume (Sound), dBA	Lg.	Wd.	Ht.	Temp. Range, ° F	Inlet	Outlet	Hazardous Location Rating		Each
Three Phase, 208/230/460V AC (Inverter Rated)







				NPT Female Inlet and Outlet

				3 psi 110 in. H₂O	220 ft³/min @ 0 psi	8.1 in. Hg 110 in. H₂O	7 1/2	18.9 amp @ 208V AC 17.8 amp @ 230V AC 8.9 amp @ 460V AC	78	27"	19"	22"	5 to 100	4	4	NEC Class I Divisions 1, 2 Group D NEC Class II Division 2 Groups F, G	0000000	000000000


				4 psi 115 in. H₂O	274 ft³/min @ 0 psi	8.5 in. Hg 115 in. H₂O	10	24.3 amp @ 208V AC 22.4 amp @ 230V AC 11.2 amp @ 460V AC	81	27"	20"	22"	5 to 100	4	4	NEC Class I Divisions 1, 2 Group D NEC Class II Division 2 Groups F, G	0000000	00000000
				5 psi 150 in. H₂O	167 ft³/min @ 0 psi	11 in. Hg 149 in. H₂O	7 1/2	18.9 amp @ 208V AC 17.8 amp @ 230V AC 8.9 amp @ 460V AC	77	23"	18"	19"	5 to 100	2	2	NEC Class I Divisions 1, 2 Group D NEC Class II Division 2 Groups F, G	0000000	00000000
				8 psi 240 in. H₂O	128 ft³/min @ 0 psi	11.9 in. Hg 161 in. H₂O	7 1/2	18.9 amp @ 208V AC 17.8 amp @ 230V AC 8.9 amp @ 460V AC	75	27"	16"	19"	5 to 100	2	2	NEC Class I Divisions 1, 2 Group D NEC Class II Division 2 Groups F, G	0000000	00000000