Wear these liners by themselves or under gloves for added protection when handling sharp objects. They meet ANSI/ISEA 105 standards for resistance to cuts, abrasions, and punctures. Their ANSI cut rating reflects the amount of force needed to slice through them with a razor blade. At A9, the highest possible rating, they can be used to handle spikes and bulky objects with sharp edges.

Cleaned and bagged in areas with low levels of particulates, these powder-free gloves are safe to use in clean rooms. They help you keep skin oil, microbes, and dust from contaminating your work. The thicker the gloves, the better they resist wear.

Shield the tops of your hands from bumps and bruises in tight spaces around heavy equipment. These gloves are often worn when handling heavy materials or machinery. All meet ANSI/ISEA 138, which rates impact resistance based on how much force they absorb. The higher the rating, the greater the protection. They also meet ANSI/ISEA 105 and EN 388 standards for various forms of protection, such as cut, abrasion, and puncture resistance.

Snip circuit board leads, inspect silicon wafers, and handle other sharp components in clean rooms. Not only are these gloves rated to protect your hands from cuts, they’re also lint-free and unlined to prevent shedding. They’re cleaned and bagged in environments with low levels of particulates, so they won’t contaminate your work area.

All meet ANSI/ISEA 105 standards for various forms of protection, such as cuts, abrasions, and punctures.

Made of interlinked rings, these gloves protect your hands from cuts and puncture wounds. They’re often used for food processing, textile cutting, and sheet metal handling. These gloves meet EN 1082-1, a European standard that measures how well chainmail gloves resist penetration from knives. It’s comparable to ANSI Cut Level A9, which is the highest cut resistance rating for gloves. You can wear these gloves on either hand—just turn them inside out when you need to switch.

Made from stainless steel, these gloves are corrosion-resistant and easy to clean. Each ring is welded fully shut, so there are no gaps that could trap particles, and there are no studs or buckles that could harbor germs. For a snug fit, wrap the adjustment clip around the cuff and slide it into any ring to secure.

Lined to insulate hands against cold objects and weather, these gloves have a leather palm to resist abrasion.

A coating on the palm adds grip and wear resistance to these cut-protection gloves. They’re rated to ANSI/ISEA standards for protecting hands from cuts, abrasions, and punctures. The thicker the gloves, the more wear they’ll withstand, but you’ll have less touch sensitivity.

All have an ANSI/ISEA 105 cut rating, which reflects the amount of force needed to cut through them with a razor blade.

Handle sharp objects in cramped spaces where your hands might bump into heavy machinery. These gloves have bumpers on the back to protect against impacts. Made with polyethylene, they’ll also shield you from cuts and punctures. They’re textured for a secure grip, even when working with slippery objects.

All have an ANSI/ISEA 105 cut rating, which reflects the amount of force required to cut through them with a razor blade.

They’re also rated ANSI/ISEA 138 for how much impact they can absorb on a scale of 1 to 3. Higher ratings signify better protection for knuckles and fingers from impact injuries.

Keep your fingertips bare to handle objects while still protecting the rest of your hand from cuts. These gloves have an ANSI cut rating of A9, the highest possible rating based on the amount of force needed to cut through them with a razor blade. And while they’re highly protective, they won’t restrict your movement—their 21-gauge knit makes them the thinnest cut-protection gloves available. As a result, they’re often used in precision tasks such as wiring and fine parts assembly.

In addition to cut resistance, these are rated to ANSI/ISEA 105 standards for protection from abrasion and punctures. A nitrile coating makes them resistant to chemicals and oil.

Made of leather, these gloves are more durable and wear-resistant than standard cut-protection gloves. All are rated to ANSI/ISEA 105 standards for cuts, punctures, abrasion, or heat.

All of these gloves have an ANSI cut rating, which reflects the amount of force required to cut through them with a razor blade. A4 is the common required minimum in industrial settings. The higher the rating, the greater the protection.

Chop, slice, and dice safely and with precision—these gloves keep your fingers nimble while still protecting you from cuts. They’re commonly used with knives and other sharp tools in food-service environments. All meet ANSI/ISEA 105 standards for various forms of protection, such as cut, abrasion, and puncture resistance. Gloves are sold individually (order two for a pair).

All have an ANSI cut rating, which reflects the amount of force required to cut through them with a razor blade. The higher the rating, the more protection you get.