McMaster-Carr logo
    Forward
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Print
    How can we improve?
    Comments
    E-mail address (if you would like a response)
    11 Products

    Cut- and Heat-Protection Gloves

    Image of ProductInUse. Knit Cuff with Dash Grip. Front orientation. Gloves. Cut- and Heat-Protection Gloves, Gloves with Palm Silicone Rubber Dash Grip.

    Knit Cuff with Dash Grip

    Often used in glass manufacturing and metal fabrication, these gloves protect your hands from sharp edges and intermittent heat. They’re rated to ANSI/ISEA 105 standards for cut and heat resistance. The ANSI heat rating reflects the amount of heat they can withstand before there’s a risk of second-degree burns. The higher the number, the greater the protection. Holding heavy objects may decrease the temperature rating.
    ANSI cut ratings reflect the amount of force required to cut through them with a razor blade.
    Palm—Gloves with palm coverage are more breathable than fully covered gloves.
    A4—Gloves rated A4 are good for jobs involving sharp-edged materials such as sheet metal and glass.
    Aramid Fabric—Gloves with aramid are resistant to flames.
    Grip Material—Gloves with grip are textured to help you grasp slippery objects.
    ANSI Rating
    Pair
    Conductive Heat
    Resistance
    Cut
    Cuff
    Style
    Material
    Lg.
    Color
    Max. Temp.,
    ° F
    For Heat
    Exposure Type
    Choose a Size (Glove Size)
    1-11
    12-Up
    Gloves with Palm Silicone Rubber Dash Grip
    5A4
    		KnitAramid Fabric12 3/4"White750DirectS/M (7, 8), L/XL (9, 10), 2XL/3XL (11, 12)53545T617000000000000
     

    High-Dexterity Work Gloves

    Image of ProductInUse. Style E. Front orientation. Style E. High-Dexterity Work Gloves.
    Image of ProductInUse. Style F. Front orientation. Style F. High-Dexterity Work Gloves.
    Image of ProductInUse. Style G. Front orientation. Style G. High-Dexterity Work Gloves.

    Style E

    Style F

    Style G

    Designed for jobs where you need to stay nimble. These form-fitting gloves resist abrasion and conform to your hand to reduce fatigue.
    Synthetic Leather—Synthetic gloves resist wear better than leather gloves.
    Silicone Rubber Grip—Gloves with a silicone rubber grip on the palms and fingers are tacky—use them for jobs where you need a strong grip.
    Rollover Fingertips—Rollover fingertips don’t have seams at the fingertips, so gloves won’t split apart in a high-contact spot.
    ANSI/ISEA 105—Gloves that meet ANSI/ISEA 105 are rated for protection from abrasion, punctures, and tears.
    EN 388—Gloves that meet EN 388 adhere to European standards, similar to ANSI/ISEA 105, for resistance to abrasive surfaces, tears, cuts, and punctures.
    Pair
    Style
    Lg.
    Cuff Style
    Touchscreen
    Compatible
    Features
    Specs. Met
    EN Mechanical
    Risk Rating
    Clothing
    Gender
    Color
    Choose a Size (Glove Size)
    1-11
    12-Up
    Synthetic Leather with Silicone Rubber Grip
    E8 1/2"Hook and LoopYesRollover Fingertips, Terry Cloth Sweat WipeANSI/ISEA 105, EN 3882121XMen'sBlackXS (7), S (8), M (9), L (10), XL (11), 2XL (12)6759T701000000000000
    F9"Hook and LoopNoReinforced Fingers, Spandex Backing, Terry Cloth Sweat WipeANSI/ISEA 105, EN 3883131XMen'sBlack/GrayS (7), M (8), L (9), XL (10), 2XL (11)6759T50000000000
     
    Synthetic Leather with Silicone Rubber Grip; Foam Palm Padding
    G9"Hook and LoopYesKnuckle GuardsEN 3882111XPMen'sBlackS (7), M (8), L (9), XL (10), 2XL (11)6759T960000000000
     

    Sticky Grip Work Gloves

    Image of Product. Front orientation. Gloves. Sticky Grip Work Gloves.
    Get a grip so your hands don’t slip. The silicone rubber on the front of these gloves sticks to nearly any dry surface for added traction while you work. Wear them to reduce the risk of dropping slippery tools or sliding on steep surfaces, such as roofs.
    Pair
    Texture
    Knitting
    Ga.
    Grip
    Coverage
    Grip
    Pattern
    Cuff Style
    Touchscreen
    Compatible
    Color
    Choose a Size (Glove Size)—Lg.
    1-11
    12-Up
    Cotton/Polyester Fabric with Silicone Rubber Grip
    Textured13PalmCrisscrossHook and LoopYesBlack/GrayXS (6)—7 1/4", S (7)—7 1/2", M (8)—7 3/4", L (9)—8 1/4", XL (10)—8 5/8", 2XL (11)—8 7/8"9680N101000000000000
     

    Cold-Protection Gloves

    Image of ProductInUse. Hook and Loop Cuff. Front orientation. Hook and Loop Cuff. Cold-Protection Gloves.
    Image of ProductInUse. Open Cuff. Front orientation. Open Cuff. Cold-Protection Gloves.

    Hook and Loop Cuff

    Open Cuff

    Image of Attribute. Touchscreen-Compatible Tip. Back orientation. ZoomedIn view. Contains Border. Touchscreen Compatible. Cold-Protection Gloves.
    Image of Attribute. Touchscreen Stylus Tip. Back orientation. ZoomedIn view. Contains Border. Touchscreen Stylus Tip. Cold-Protection Gloves.

    Touchscreen-Compatible

    Tip

    Touchscreen Stylus Tip

    A layer of insulation inside these gloves keeps your hands warm while you work outdoors or handle cold objects.
    Palm—Gloves with palm padding have extra cushion to reduce wear.
    Dot Grip—Gloves with a dot or criss-cross palm help you grip objects.
    Touchscreen Compatible—Touchscreen-compatible gloves let you type on a keyboard or touchscreen without taking off your glove.
    Reinforced Thumb—Gloves with a reinforced thumb have extra material in heavy-use spots to extend their life without limiting dexterity.
    Touchscreen Stylus Tip—Gloves with a touchscreen stylus tip allow for precise input, making them ideal for devices with small buttons. The tip screws onto the glove’s index finger.
    EN 388—Gloves that meet EN 388 are rated to European standards for resistance to abrasions, cuts, tears, and punctures.
    EN 511—Gloves that meet EN 511 are rated to European standards for protection from cold or water permeation.
    EN Rating
    Pair
    Material
    Lining Material
    Lg.
    Cuff Style
    Touchscreen
    Compatible
    Color
    Min.
    Temp.
    Features
    Specs. Met
    Mechanical
    Risk
    Cold
    Protection
    Choose a Size (Glove Size)
    1-11
    12-Up
    Gloves with Silicone Rubber-Grip Dot Palm
    Fleece/Polyester FabricFaux Fur9 1/2"OpenYesBlack/Fluorescent OrangeNot RatedInsulating Inner Layer———S (7), M (8), L (9)7891N14000000000000
    Polyester FabricFleece Fabric9 1/4"OpenYesBlackNot RatedInsulating Inner Layer———XS (6), S (7), M (8), L (9), XL (10)7891N130000000000
     
    Gloves with Palm Padding and Silicone Rubber-Grip Dot Palm
    Polyester FabricPolyester Fabric11"Hook and LoopYesBlack-30° FInsulating Inner Layer, Knuckle Guard, Reflective Strips, Reinforced Thumb, Touchscreen Stylus TipEN 388, EN 5113343X230M (8), L (9), XL (10), 2XL (11)7891N180000000000
     
    Replacement Stylus Tips
    Pkg.
    Qty.
    Pkg.
    Stylus Tips107891N151000000

    Heavy Duty Work Gloves

    Image of Product. Textured with Open Cuff. Front orientation. Gloves. Heavy Duty Work Gloves, Synthetic Leather, Textured, Open Cuff.

    Textured with

    Open Cuff

    Rated to ANSI/ISEA 105 and 138 standards, these gloves offer complete protection from cuts, abrasions, and impacts. The higher the rating, the greater the protection. They’re often worn to handle sheet metal, install pipes, or maintain HVAC equipment. They fit snugly, so they won't limit your dexterity.
    Textured—Textured gloves give you a secure grip on slippery objects.
    EN 388—Gloves that meet EN 388 are rated to European standards for resistance to abrasions, cuts, tears, and punctures.
    ANSI Rating
    Pair
    Cut
    Abrasion
    Puncture
    Impact
    Texture
    Cuff
    Style
    Features
    Grip
    Coverage
    Grip
    Pattern
    Lg.
    Touchscreen
    Compatible
    Color
    Specs. Met (EN
    Rating)
    Choose a Size (Glove Size)
    1-11
    12-Up
    Synthetic Leather
    A5
    		35
    		2TexturedOpenKnuckle Guards, Reinforced Palm, Spandex BackingPalmCrisscross9"NoRed/YellowANSI/ISEA 105
    ANSI/ISEA 138
    EN 388 (4X42DP)    		S (7), M (8), L (9), XL (10), 2XL (11)9353T6000000000000
     

    Vibration-Protection Work Gloves

    Image of ProductInUse. Synthetic Leather. Front orientation. Gloves. Vibration-Protection Work Gloves, Synthetic Leather.

    Synthetic Leather

    Reduce hand fatigue while operating rivet guns, jackhammers, and other power tools that produce high levels of vibration. These gloves have either rubber padding or internal air pockets to absorb shock and cushion vibration. All gloves meet ANSI/ASA S2.73 and ISO 10819 standards, which verify that they reduce the amount of vibration that travels from your machine to your hand. As a result, they help protect against health risks related to long-term vibration exposure, such as hand-arm vibration syndrome (HAVS). They’re also tested according to EN 388 standards for resistance to abrasion, cuts, tears, punctures, and impacts.
    Synthetic Leather—Synthetic leather gloves have better wear resistance than leather gloves.
    Dot Grip—Gloves with rubber dots on the palm have a strong grip.
    Mesh Backing—Those with mesh backing also ventilate your hand when you work.
    Padding
    Texture
    Cuff Style
    Material
    Form
    Coverage
    Grip
    Coverage
    Grip Material
    Grip
    Pattern
    Color
    Features
    Specs. Met (EN Rating)
    Choose a Size (Glove Size)
    Pair
    Synthetic Leather
    TexturedHook and LoopPlasticAir PocketAll Fingers, PalmPalmSilicone Rubber
    		DotBlack/Fluorescent Orange/Fluorescent YellowMesh Backing, Reflective Tape on KnucklesANSI/ASA S2.73/ISO 10819
    EN 388 (4243X)    		S (7), M (8), L (9), XL (10), 2XL (11)4183T111000000
     
    back to top