A good all-around choice, Garolite G-10/FR4 is strong, machinable, and electrically insulating. It meets UL 94 V-0 for flame retardance.

With a coating that reduces static electricity , these sheets are good for use in solder pallets, automated test equipment, electronic assembly workstations, and other applications where static buildup could damage your equipment.

A good all-around choice, Garolite G-10/FR4 is strong, machinable, and electrically insulating. It meets UL 94 V-0 for flame retardance.

These rectangular tubes are flame retardant, machinable, and electrically insulating.

Offering higher strength and better heat resistance than Garolite G-10/FR4, Garolite G-11 is suitable for continuous use in elevated temperatures.

A flame-retardant version of Garolite G-11, these tubes are commonly used to make bushings, standoffs, and spacers for areas with high temperatures. All are stronger and resist heat better than Garolite G-10/FR4.

Garolite CE is often fabricated into parts where high strength is not required.

Graphite is added to this Garolite CE to provide a slippery surface that reduces friction and makes this material conductive.

Used in turbine bearings, downpipe gaskets, and other machinery, these Garolite tubes withstand heavy impacts and temperatures as high as 500° F.

Use Garolite G-10 in place of Garolite G-10/FR4 for applications that are sensitive to halogen, such as in nuclear plants. It's strong, machinable, and electrically insulating.

Garolite G-7 withstands temperatures up to 425° F—higher than any other grade of Garolite. While not as strong as Garolite G-9 sheets, these sheets and bars offer better arc resistance in dry environments and a higher level of electrical insulation.

Stronger than Garolite CE with better electrical-insulating properties, Garolite XX is often fabricated into low-cost electrical components.

Stronger than Garolite CE with better electrical-insulating properties, Garolite XX is often fabricated into low-cost electrical components.

Use this Garolite glass carbon to divert static charges that can damage equipment.

Easily turn these rectangular tubes into parts for transformers and switchgears using high-speed tooling.

Rated for temperatures down to -415° F, this Garolite G-10 CR performs better in cryogenic applications than other glass epoxies.

Frequently called electrical-grade Garolite, this Garolite G-9 is strong, electrically insulating, and arc resistant in dry environments.

Machine these angles into arc barriers, switch mounts, and components for circuit breakers and electrical equipment. They resist carrying electric currents in dry or humid areas, even when exposed to sudden electric discharge.

Offering excellent arc and track resistance, this GPO3 fiberglass is often used for electrical applications in humid environments.

Route and insulate wire using these square fiberglass tubes, which fit better along edges and around corners than round tubes.

Use these round GPO3 fiberglass tubes for electrical applications in humid environments.

Offering excellent arc and track resistance, this GPO3 fiberglass is often used for electrical applications in humid environments.

An alternative to wood in structural applications, FRP fiberglass is strong and lightweight.

An alternative to wood in structural applications, FRP fiberglass is strong and lightweight.

An alternative to wood in structural applications, FRP fiberglass is strong and lightweight.

Made with a flame-retardant resin, this FRP fiberglass meets ASTM E84 Class A.

With more than twice the heat tolerance of standard FRP fiberglass, this material withstands temperatures up to 370° F.

Known for its use in the aerospace industry, where a balance of weight and strength is critical, carbon fiber is now often machined into panels for structural framing, machinery components, and robotics.

Mount these lightweight tubes to flat surfaces in place of aluminum to create structural frames, machinery components, and robotics.

A layer of foam is sandwiched between two pieces of carbon fiber to make a featherweight material that's even lighter than standard carbon fiber.

In addition to repairing or reinforcing existing composites, these filaments can be wrapped around mandrels to create new composite shapes. All add stiffness and strength to a variety of applications.

Mount these lightweight half rounds on flat surfaces to reinforce frames and structures. Carbon fiber is often used in place of aluminum because it weighs less but is almost as rigid.

Reinforce structures with these rods—they weigh less than aluminum while remaining strong and almost as rigid.

Almost as stiff as steel and a fraction of the weight, these carbon fiber sheets are often used for structural framing, machinery components, and robotics.

Also known as fishpaper.

Hard fiber is the easiest composite to machine, making it good for creating custom parts. Also known as vulcanized fiber.

Kevlar is a super-tough material that stands up to wear and abrasion.

Also known as MDF, these fiberboard sheets are smoother, denser, and more uniform than real wood.

Lighter in weight than any other wood, yet still strong, these balsa cores stiffen composite sandwiches without weighing them down.

Laminate or mold this plastic film onto credit card signing screens, signs, and other surfaces for a see-through protective layer that won’t scratch.

Drill holes of any size and etch your own circuit board design into copper-clad boards.

Unlike metal rods, these threaded rods will not warp at extreme temperatures, making them ideal for heat treating and furnace fixtures.