McMaster-Carr logo
    Forward
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Print
    How can we improve?
    Comments
    E-mail address (if you would like a response)
    72 Products

    Conductive Graphite Sheets and Bars

    A low surface resistivity makes this graphite a good electrical conductor. Since this graphite won't adhere to metal, it can be used to fabricate furnace parts, crucibles, and ingot molds.
    Sheets
    Image of Product. Front orientation. Graphite. Conductive Graphite Sheets and Bars.
    6" × 6"
    12" × 12"
    Thk.
    Thk. Tolerance
    Max. Temp. in
    a Vacuum, ° F
    Surface Resistivity,
    ohm/sq.
    Grain
    Size
    Color
    Max. Temp.,
    ° F
    Tensile Strength,
    psi
    Performance
    Each
    Each
    1/4"-0.005" to 0.005"5,0002.2 × 10^-30.0004"Black8005,500Conductive9121K640000009121K670000000
    1/2"-0.005" to 0.005"5,0001.1 × 10^-30.0004"Black8005,500Conductive9121K650000009121K68000000
    1"-0.005" to 0.005"5,0005.5 × 10^-40.0004"Black8005,500Conductive9121K660000009121K69000000

    Ultra-Conductive Graphene Sheets

    Image of Product. Front orientation. Carbon. Ultra-Conductive Graphene Sheets.
    This highly conductive graphene material is often used in electronic devices, such as cell phones, laptop computers, digital cameras, and LEDs. It can be folded without tearing or damaging the sheet and can be cut into smaller pieces with scissors. Thickness, width, and length tolerances are not rated.
    8" × 8"
    Thk.
    Surface Resistivity,
    ohm/sq.
    Color
    Max. Temp.,
    ° F
    Each
    0.001"2.8 × 10^2Silver7501334N2000000
     

    High-Temperature High-Pressure Fire-Rated Graphite Gasket Material

    Made of American Bureau of Shipping Fire Safe approved graphite material, these sheets withstand temperatures up to 650° F and pressure up to 2,000 psi. Use them when a strong seal is required in boilers and furnaces. Cut with a utility knife.
    Sheets
    Image of Product. Front orientation. Gasket Material. High-Temperature High-Pressure Fire-Rated Graphite Gasket Material .
    1/32" Thick
    1/16" Thick
    1/8" Thick
    Wd.
    Lg.
    Max. Pressure,
    psi
    Temp. Range,
    ° F
    Color
    Each
    Each
    Each
    6"6"2,000-100 to 650Brown12925K3100000012925K3200000012925K33000000
    15"15"2,000-100 to 650Brown12925K210000012925K2400000012925K27000000
    30"30"2,000-100 to 650Brown12925K2200000012925K2500000012925K28000000

    High-Temperature Extreme-Pressure Graphite Gasket Material

    Able to withstand pressure up to 10,000 psi, these are our highest pressure-rated gasket sheets. They handle temperatures up to 850° F. Use them when a strong seal is required in boilers and furnaces. Cut with a utility knife.
    Sheets
    Image of Product. Front orientation. Gasket Material. High-Temperature Extreme-Pressure Graphite Gasket Material.
    1/32" Thick
    1/16" Thick
    1/8" Thick
    Wd.
    Lg.
    Max. Pressure,
    psi
    Temp. Range,
    ° F
    Color
    Insert
    Material
    Each
    Each
    Each
    6"6"10,000-400 to 850GrayStainless Steel
    		95675K2100000095675K22000000———0
    12"12"10,000-400 to 850GrayStainless Steel
    		95675K650000095675K660000095675K670000000
    24"24"10,000-400 to 850GrayStainless Steel
    		95675K750000095675K7600000095675K77000000
    39"39"10,000-400 to 850GrayStainless Steel
    		95675K8500000095675K8600000095675K87000000
    60"60"10,000-400 to 850GrayStainless Steel
    		95675K9500000095675K9600000095675K9700000000

    High-Temperature High-Pressure Graphite Gasket Material

    These sheets and discs can withstand temperatures up to 850° F and pressure up to 2,000 psi. Use them when a strong seal is required in boilers and furnaces. Cut with a utility knife.
    Sheets
    Image of Product. Front orientation. Gasket Material. High-Temperature High-Pressure Graphite Gasket Material , Sheets.
    Sheets are graphite; they offer excellent compression under moderate loads.
    1/32" Thick
    1/16" Thick
    1/8" Thick
    Wd.
    Lg.
    Max. Pressure,
    psi
    Temp. Range,
    ° F
    Color
    Each
    Each
    Each
    6"6"2,000-400 to 850Gray95715K11100000095715K11200000095715K113000000
    12"12"2,000-400 to 850Gray95715K610000095715K620000095715K63000000
    24"24"2,000-400 to 850Gray95715K710000095715K720000095715K73000000
    39"39"2,000-400 to 850Gray95715K8100000095715K8200000095715K83000000
    60"60"2,000-400 to 850Gray95715K9100000095715K9200000095715K93000000

    Ultra-Fine-Grain Conductive Graphite Sheets

    Image of Product. Front orientation. Graphite. Ultra-Fine-Grain Conductive Graphite Sheets.
    This graphite is denser and slightly stronger than standard conductive graphite because it has a smaller grain. A low surface resistivity makes this graphite a good electrical conductor. Since this graphite won't adhere to metal, it can be used to fabricate furnace parts, crucibles, and ingot molds.
    6" × 6"
    Thk.
    Thk. Tolerance
    Max. Temp. in
    a Vacuum, ° F
    Surface Resistivity,
    ohm/sq.
    Grain
    Size
    Color
    Max. Temp.,
    ° F
    Tensile Strength,
    psi
    Performance
    Each
    1/4"-0.005" to 0.005"5,0002.36 × 10^-20"Black8006,670Conductive9015K830000000
    1/2"-0.005" to 0.005"5,0001.18 × 10^-20"Black8006,670Conductive9015K84000000

    Compressible Graphite Sheets

    Image of Product. Front orientation. Graphite. Compressible Graphite Sheets.
    For use as seals and gaskets in high-temperature environments, this graphite can compress up to 35% of its thickness for a tight seal.
    12" × 12"
    36" × 36"
    Thk.
    Thk. Tolerance
    Max. Temp. in
    a Vacuum, ° F
    Color
    Temp. Range,
    ° F
    Tensile Strength,
    psi
    Performance
    Surface Resistivity,
    ohm/sq.
    Each
    Each
    1/16"-0.010" to 0.010"4,500Gray-400 to 950700Compressible, Conductive1× 10^21276N120000001276N140000000
    1/8"-0.010" to 0.010"4,500Gray-400 to 950700Compressible, Conductive1× 10^21276N16000001276N18000000

    Reinforced Compressible Graphite Sheets

    Image of Product. Front orientation. Graphite. Reinforced Compressible Graphite Sheets.
    A stainless steel insert makes this material stronger than standard compressible graphite. For use as seals and gaskets in high-temperature environments, this graphite can compress up to 35% of its thickness for a tight seal.
    12" × 12"
    36" × 36"
    Thk.
    Thk. Tolerance
    Max. Temp. in
    a Vacuum, ° F
    Insert
    Thk.
    Color
    Temp. Range,
    ° F
    Tensile Strength,
    psi
    Performance
    Surface Resistivity,
    ohm/sq.
    Each
    Each
    1/32"-0.010" to 0.010"4,5000.008"Gray-400 to 9505,000Compressible, Conductive1× 10^21276N210000001276N230000000
    1/16"-0.010" to 0.010"4,5000.008"Gray-400 to 9505,000Compressible, Conductive1× 10^21276N25000001276N27000000
    1/8"-0.010" to 0.010"4,5000.008"Gray-400 to 9505,000Compressible, Conductive1× 10^21276N29000001276N32000000

    Slippery Static-Dissipative Garolite

    Image of Product. Front orientation. Garolite. Slippery Static-Dissipative Garolite.
    Often used as bearings or wear pads, these Garolite sheets have added graphite to make their surface more slippery. It also makes them static dissipative. Garolite is made up of a phenolic resin layered with cotton fabric for reinforcement. It’s also called phenolic, Bakelite, or canvas-grade industrial laminate.
    12" × 12"
    Thk.
    Thk. Tolerance
    Color
    Max. Temp.,
    ° F
    Tensile Strength,
    psi
    Impact Strength,
    ft·lbf/in
    Surface Resistivity,
    ohm/sq.
    Hardness
    For Use
    Outdoors
    Each
    1/16"-0.008" to 0.008"Black2357,000 to 10,0001.4 to 1.71× 10^6Rockwell M90
    (Hard)    		No2547K6700000
    1/8"-0.01" to 0.01"Black2357,000 to 10,0001.4 to 1.71× 10^6Rockwell M90
    (Hard)    		No2547K7100000
    1/4"0" to 0.03"Black2357,000 to 10,0001.4 to 1.71× 10^6Rockwell M90
    (Hard)    		No2547K7400000
    1/2"0" to 0.048"Black2357,000 to 10,0001.4 to 1.71× 10^6Rockwell M90
    (Hard)    		No2547K7700000
    3/4"0" to 0.058"Black2357,000 to 10,0001.4 to 1.71× 10^6Rockwell M90
    (Hard)    		No2547K81000000
    1"0" to 0.065"Black2357,000 to 10,0001.4 to 1.71× 10^6Rockwell M90
    (Hard)    		No2547K84000000

    Highly Wear-Resistant PTFE Sheets

    Image of Product. Front orientation. Plastic. Highly Wear-Resistant PTFE Sheets.
    Filled with carbon and graphite, these naturally slippery PTFE sheets stand up to wear better than standard PTFE. Often fabricated into wear rings, wear pads, and rotational bearings, they resist expanding and maintain their strength when exposed to heat.
    Wd.
    Lg.
    Fabrication
    Min. Temp.,
    ° F
    Max. Temp.,
    ° F
    Tensile Strength,
    psi
    Color
    Each
    3/16" Thick (0" to 0.019" Tolerance)
    12"12"Molded-3255001,000Gray1331N110000000
    24"24"Molded-3255001,000Gray1331N21000000
    36"36"Molded-3255001,000Gray1331N31000000
     
    1/4" Thick (0" to 0.025" Tolerance)
    12"12"Molded-3255001,000Gray1331N12000000
    24"24"Molded-3255001,000Gray1331N22000000
    36"36"Molded-3255001,000Gray1331N32000000
     
    1/2" Thick (0" to 0.05" Tolerance)
    12"12"Molded-3255001,000Gray1331N13000000
    24"24"Molded-3255001,000Gray1331N23000000
     
    1" Thick (0" to 0.1" Tolerance)
    12"12"Molded-3255001,000Gray1331N14000000
     
    back to top