Use these wheels to cut through metal such as iron, stainless steel, and steel. They are reinforced with two layers of fiberglass mesh. Choose coarser grit for fast cuts; choose finer grit for smooth cuts.

Warning: Use wheels that have a greater rpm rating than the no-load rpm of your tool.

Use these wheels to cut through metal such as aluminum, iron, stainless steel, and steel. They are reinforced with two layers of fiberglass mesh. Choose coarser grit for fast cuts; choose finer grit for smooth cuts.

Warning: Use wheels that have a greater rpm rating than the no-load rpm of your tool.

A good value for everyday use, these wheels offer an economical balance between heavy material removal and long life. They are also known as Type 27 wheels, raised-hub wheels, and grinding discs.

Wheels are aluminum oxide, which is the most common abrasive used in grinding metal. Use for grinding surfaces and removing weld seams. The _1/8" and _3/16" thick wheels can also be used for notching and cutting.

Caution: Use only accessories that have a greater rpm rating than the maximum speed of the grinder you choose.

Run these high-density aluminum oxide wheels at higher speeds than standard cutoff wheels to make quick cuts in aluminum, iron, stainless steel, and steel. Wheels are reinforced with a layer of fiberglass mesh.

Warning: Use wheels that have a greater rpm rating than the no-load rpm of your tool.

The flexible backing on these wheels conforms to curved and rough surfaces. Wheels are aluminum oxide, which is the most common abrasive used in grinding metal.

Caution: Use only accessories that have a greater rpm rating than the maximum speed of the grinder you choose.

These wheels are designed to cut stainless steel. They are reinforced with a layer fiberglass mesh.

Warning: Use wheels that have a greater rpm rating than the no-load rpm of your tool.

Silicon carbide cuts through concrete and stone without generating much heat. Wheels are also known as Type 27 wheels, raised-hub wheels, and grinding discs.

Caution: Use only accessories that have a greater rpm rating than the maximum speed of the grinder you choose.

A blend of ceramic alumina and zirconia alumina removes material at a 50% faster rate than our Long-Life Grinding Wheels. Wheels are also known as Type 27 wheels, raised-hub wheels, and grinding discs.

Wheels are designed for grinding metal surfaces and removing weld seams. The _1/8" and _3/16" thick wheels can also be used for notching and cutting.

Caution: Use only accessories that have a greater rpm rating than the maximum speed of the grinder you choose.

Also known as Type 27, raised-hub, and depressed-center cutoff wheels, these wheels outperform Type 1 wheels when making flush cuts in metal. Wheels are reinforced with two layers of fiberglass mesh. Choose coarser grit for fast cuts; choose finer grit for smooth cuts.

Warning: Use wheels that have a greater rpm rating than the no-load rpm of your tool.

Wheels are a blend of aluminum oxide and zirconia alumina, which removes more material and lasts three times as long as our General Purpose Grinding Wheels. They are also known as Type 27 wheels, raised-hub wheels, and grinding discs.

Wheels are designed for grinding metal surfaces and removing weld seams. The _1/8" thick wheels can also be used for notching and cutting.

Caution: Use only accessories that have a greater rpm rating than the maximum speed of the grinder you choose.

These high-density ceramic or ceramic oxide wheels have two layers of fiberglass mesh reinforcement and last up to twice as long as long-life cutoff wheels when cutting iron, stainless steel, and steel.

Warning: Use wheels that have a greater rpm rating than the no-load rpm of your tool.

Made of premium grade abrasives, these wheels make fast, burr-free cuts in stainless steel. They’re reinforced with two layers of fiberglass mesh. Choose coarser grit for fast cuts; choose finer grit for smooth cuts.

Warning: Use wheels that have a greater rpm rating than the no-load rpm of your tool.

Use these wheels to cut through metal such as iron, stainless steel, and steel. They are reinforced with a layer of fiberglass mesh. Choose coarser grit for fast cuts; choose finer grit for smooth cuts.

Warning: Use wheels that have a greater rpm rating than the no-load rpm of your tool.

Make cuts in hard, brittle materials such as firebrick, stone, and concrete. These silicon carbide wheels are reinforced with a layer of fiberglass mesh. For wheels with a round/diamond arbor, detach the center piece to expose the diamond shape.

Warning: Use wheels that have a greater rpm rating than the no-load rpm of your tool.

Bonded without any wax or rubber filler, these wheels resist material buildup. They are also known as Type 27 wheels, raised-hub wheels, and grinding discs.

Wheels are aluminum oxide, which is the most common abrasive used in grinding metal. They are designed for grinding surfaces and removing weld seams.

Caution: Use only accessories that have a greater rpm rating than the maximum speed of the grinder you choose.

Make cuts in hard, brittle materials such as firebrick, stone, and concrete. Wheels are made of silicon carbide abrasive that is reinforced with a layer of fiberglass mesh.

Warning: Use wheels that have a greater rpm rating than the no-load rpm of your tool.

Use these wheels to cut through metal such as aluminum, iron, stainless steel, and steel. They are reinforced with a layer of fiberglass mesh. For wheels with a round/diamond arbor, detach the center piece to expose the diamond shape.

Warning: Use wheels that have a greater rpm rating than the no-load rpm of your tool.

A blend of cotton laminate and aluminum oxide creates a smoother surface than other grinding wheels with similar grits. Wheels are also known as Type 27 wheels and raised-hub wheels.

Caution: Use only accessories that have a greater rpm rating than the maximum speed of the grinder you choose.

Made of ceramic alumina or a combination of ceramic alumina and zirconia alumina, these wheels last up to ten times longer than standard cutoff wheels when cutting hard metal such as Inconel nickel, Hastelloy nickel, and tool steel. Wheels are reinforced with two layers of fiberglass mesh.

Warning: Use wheels that have a greater rpm rating than the no-load rpm of your tool.

Premium-grade abrasive materials and two layers of fiberglass mesh reinforcement give these wheels a longer life than standard cutoff wheels when cutting metal such as iron, stainless steel, and steel. Choose coarser grit for fast cuts; choose finer grit for smooth cuts.

Warning: Use wheels that have a greater rpm rating than the no-load rpm of your tool.

Two layers of fiberglass mesh reinforcement give these fast-cutting, zirconia alumina wheels at least three times the life of standard cutoff wheels when cutting aluminum, iron, stainless steel, and steel. They are not for use on hand-held saws.

Warning: Use wheels that have a greater rpm rating than the no-load rpm of your tool.

Also known as Type 27, raised-hub, and depressed-center cutoff wheels, these wheels outperform Type 1 wheels when making flush cuts. They make fast, burr-free cuts in stainless steel. Wheels are reinforced with two layers of fiberglass mesh. Choose coarser grit for fast cuts; choose finer grit for smooth cuts.

Warning: Use wheels that have a greater rpm rating than the no-load rpm of your tool.

Make burr-free cuts in hard or thick materials, such as metal pipes, bars, and sheets. Made with bonded abrasives, these wheels are designed to slice through metal more quickly than other saw blades. They’re not for use on hand-held saws.

Warning: Use wheels that have a greater rpm rating than the no-load rpm of your tool.