Use these wheels for light grinding, deburring, and sharpening.

Wheels include one of each reducer bushing listed. The smallest bushing size shown is the smallest allowed for that size wheel.

Designed to stand up to heavy use, these wheels remove more material than our General Purpose Grinding Wheels.

Wheels are for grinding, deburring, and sharpening. They include one of each reducer bushing listed. The smallest bushing size shown is the smallest allowed for that size wheel.

Caution: Use only accessories that have a greater rpm rating than the maximum speed of the grinder you choose.

A more durable abrasive allows these wheels to remove more material and last longer than Norton General Purpose Grinding Wheels. They are also known as Type 1 wheels and straight wheels.

Truing and cleaning before first use is recommended.

Caution: Use only accessories that have a greater rpm rating than the maximum speed of the grinder you choose.

The abrasive-embedded mesh construction provides a cushioned grind. Also known as convolute wheels.

Caution: Use only accessories that have a greater rpm rating than the maximum speed of the grinder you choose.

Make burr-free cuts in a variety of materials—from rubber to metal to stone. Made from a blend of silicon carbide and aluminum oxide abrasives, these cutoff wheels won’t clog or burn when slicing through nonmetals. They’re often used to cut hard or thick pipe, sheets, and bars to size.

Warning: Use wheels that have a greater rpm rating than the no-load rpm of your tool.

Make burr-free cuts in metal tubing and extrusions, such as strut channels and rails. Designed to slice through hard metals, these wheels are made of bonded abrasives. They’re reinforced with two layers of fiberglass mesh for increased stability and strength compared to other bench-top cutoff wheels. This reinforcement also results in less vibration for a cleaner cut. These cutoff wheels are not for use with hand-held saws.

Warning: Use wheels that have a greater rpm rating than the no-load rpm of your tool.

Use these wheels to cut through metal such as aluminum, iron, stainless steel, and steel. They are reinforced with a layer of fiberglass mesh.

Warning: Use wheels that have a greater rpm rating than the no-load rpm of your tool.

Make cuts in hard, brittle materials such as firebrick, stone, and concrete. These wheels are silicon carbide that is reinforced with a layer of fiberglass mesh.

Warning: Use wheels that have a greater rpm rating than the no-load rpm of your tool.

Create the nearly polished finish required for testing metal with these non-reinforced aluminum oxide wheels. They are not for use on hand-held saws.

Warning: Use wheels that have a greater rpm rating than the no-load rpm of your tool.

Press these discs onto sanding tools or backup pads for a hold that won’t slip. To ensure the best bond, clean the pad with a mild alcohol—avoid harsh solvents such as MEK and acetone that can damage the adhesive. Also known as PSA discs.

Make burr-free cuts in hard or thick materials, such as metal pipes, bars, and sheets. Made with bonded abrasives, these wheels are designed to slice through metal more quickly than other saw blades. They’re not for use on hand-held saws.

Warning: Use wheels that have a greater rpm rating than the no-load rpm of your tool.

The abrasive on these discs is sharp and durable enough to cut hard metals without dulling quickly. Press discs onto sanding tools or backup pads for a hold that won’t slip. To ensure the best bond, clean the pad with a mild alcohol—avoid harsh solvents such as MEK and acetone that can damage the adhesive. Also known as PSA discs.

Make fast, burr-free cuts in stainless steel with these premium aluminum oxide wheels. They’re reinforced with a layer of fiberglass mesh. Wheels are not for use on hand-held saws. Choose coarser grit for fast cuts; choose finer grit for smooth cuts.

Warning: Use wheels that have a greater rpm rating than the no-load rpm of your tool.

Use these wheels to cut through metal such as aluminum, iron, stainless steel, and steel. They are reinforced with a layer of fiberglass mesh. Wheels are not for use on hand-held saws.

Warning: Use wheels that have a greater rpm rating than the no-load rpm of your tool.

These wheels are thinner than standard bench-top cutoff saw wheels, so they cut through aluminum, iron, stainless steel, and steel more quickly. Wheels are reinforced with a layer of fiberglass mesh. They are not for use on hand-held saws.

Warning: Use wheels that have a greater rpm rating than the no-load rpm of your tool.

Two layers of fiberglass mesh reinforcement give these fast-cutting, zirconia alumina wheels at least three times the life of standard cutoff wheels when cutting aluminum, iron, stainless steel, and steel. They are not for use on hand-held saws.

Warning: Use wheels that have a greater rpm rating than the no-load rpm of your tool.

These wheels have a blend of aluminum oxide and silicon carbide abrasives for cutting ductile iron. They are reinforced with a layer of fiberglass mesh.

Warning: Use wheels that have a greater rpm rating than the no-load rpm of your tool.

Use these clog-resistant wheels to make quick cuts in soft metal such as aluminum, brass, and copper. Wheels are reinforced with a layer of fiberglass mesh. They are not for use on hand-held saws.

Warning: Use wheels that have a greater rpm rating than the no-load rpm of your tool.

These wheels are reinforced with fiberglass mesh and designed to last longer than standard wheels when cutting ductile iron. They are not for use on hand-held saws.

Warning: Use wheels that have a greater rpm rating than the no-load rpm of your tool.

Cut through aluminum, iron, stainless steel, and steel with these versatile wheels. Their aluminum oxide abrasive stays sharp across a wide range of metals for consistent performance and long wheel life. Fiberglass mesh reinforcement resists breakage during high-speed use. The Type 1 straight design fits standard floor-mount chop saws and cutoff machines.

Warning: Use wheels that have a greater rpm rating than the no-load rpm of your tool.

Spend more time sanding and less time replacing clogged discs. A slick coating prevents dust and debris buildup on the abrasive surface. Press these discs onto sanding tools or backup pads for a hold that won’t slip. To ensure the best bond, clean the pad with a mild alcohol—avoid harsh solvents such as MEK and acetone that can damage the adhesive. Also known as PSA discs.

Prevent clogging and smearing when sanding soft materials. The abrasive won’t trap particles, so these discs stay sharp longer. Press them onto sanding tools or backup pads for a hold that won’t slip. To ensure the best bond, clean the pad with a mild alcohol—avoid harsh solvents such as MEK and acetone that can damage the adhesive. Also known as PSA discs.