About Structural Adhesives
More
About Paint and Protective Coatings
More
Flexible Instant-Bond Adhesives
![](/prerenderstable/mvPRE/contents/gfx/imagecache/758/7586a32-@halfx_637061216328129437.png?ver=imagenotfound)
Accommodate joint movement with these adhesives that remain pliable when cured. Also known as super glue. Use an accelerator (sold separately) to shorten the time it takes the adhesive to reach full strength.
Container | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Size, fl. oz. | Type | Max. Gap Size Filled | Begins to Harden | Reaches Full Strength | Consistency (Viscosity) | Elongation | Temp. Range, °F | Color | For Joining | Each | |
Loctite® Adhesives | ||||||||||||
4851 | 0.7 | Bottle | 0.006" | 20 sec. | 24 hrs. | Thin Liquid (380 cP) | 85% | -65° to 120° | Clear | Composites, Fabric, Metal, Plastic, Rubber | 00000000 | 000000 |
4861 | 0.7 | Bottle | 0.008" | 20 sec. | 24 hrs. | Thick Liquid (4,250 cP) | 85% | -65° to 120° | Clear | Composites, Fabric, Metal, Plastic, Rubber | 00000000 | 00000 |
4902 | 0.7 | Bottle | 0.004" | 10 sec. | 24 hrs. | Thin Liquid (200 cP) | 155% | -65° to 180° | Clear | Ceramic, Composites, Glass, Metal, Plastic, Rubber, Wood | 000000000 | 00000 |
Instant-Bond Adhesives
![](/prerenderstable/mvPRE/contents/gfx/imagecache/758/7586a32-@halfx_637061216328129437.png?ver=imagenotfound)
Also known as super glue, these adhesives bond quickly. Use an accelerator (sold separately) to shorten the time it takes the adhesive to reach full strength.
Container | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Size, fl. oz. | Type | Max. Gap Size Filled | Begins to Harden | Reaches Full Strength | Consistency (Viscosity) | Temp. Range, °F | Color | For Joining | Each | |
Loctite® Adhesives | |||||||||||
431 | 0.7 | Bottle | 0.008" | 15 sec. | 24 hrs. | Thin Liquid (1,000 cP) | -65° to 180° | Clear | Composites, Metal, Plastic, Rubber | 00000000 | 000000 |
4011 | 0.7 | Bottle | 0.005" | 15 sec. | 24 hrs. | Thin Liquid (120 cP) | -65° to 180° | Clear | Cardboard, Fabric, Metal, Plastic, Rubber, Wood | 000000 | 00000 |
4013 | 0.7 | Bottle | 0.007" | 20 sec. | 24 hrs. | Thin Liquid (600 cP) | -65° to 180° | Clear | Metal, Plastic, Rubber | 0000000 | 00000 |
4161 | 0.7 | Bottle | 0.008" | 30 sec. | 24 hrs. | Thick Liquid (1,580 cP) | -65° to 180° | Clear | Metal, Plastic, Rubber | 0000000 | 00000 |
Toughened Instant-Bond Adhesives
![](/prerenderstable/mvPRE/contents/gfx/imagecache/758/7586a32-@halfx_637061472753481420.png?ver=imagenotfound)
Mixed with rubber for better impact resistance than standard instant-bond adhesives, these adhesives form strong, resilient bonds. Also known as super glue. Use an accelerator (sold separately) to shorten the time it takes the adhesive to reach full strength.
435 and 438 work on porous materials such as wood, paper, and fabric.
Container | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Size, fl. oz. | Type | Max. Gap Size Filled | Begins to Harden | Reaches Full Strength | Consistency (Viscosity) | Temp. Range, °F | Color | For Joining | Each | |
Loctite® Adhesives | |||||||||||
435 | 0.7 | Bottle | 0.006" | 30 sec. | 24 hrs. | Thin Liquid (180 cP) | -65° to 220° | Clear | Cardboard, Composites, Fabric, Metal, Plastic, Rubber, Wood | 00000000 | 000000 |
435 | 16 | Bottle | 0.006" | 30 sec. | 24 hrs. | Thin Liquid (180 cP) | -65° to 220° | Clear | Cardboard, Composites, Fabric, Metal, Plastic, Rubber, Wood | 00000000 | 000000 |
Optically Clear Instant-Bond Adhesives
![](/prerenderstable/mvPRE/contents/gfx/imagecache/758/7586a32-@halfx_637061216328129437.png?ver=imagenotfound)
To invisibly bond transparent plastics, these adhesives won’t turn cloudy. Also known as super glue. Use an accelerator (sold separately) to shorten the time it takes the adhesive to reach full strength.
Certificates with a traceable lot number and product shelf life are available for these products. Download certificates from ORDER HISTORY after your order ships.
Container | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Size, fl. oz. | Type | Max. Gap Size Filled | Begins to Harden | Reaches Full Strength | Consistency (Viscosity) | Temp. Range, °F | Color | For Joining | Each | |
Loctite® Adhesives | |||||||||||
4031 | 0.7 | Bottle | 0.008" | 50 sec. | 24 hrs. | Thick Liquid (1,380 cP) | -65° to 160° | Clear | Metal, Plastic, Rubber | 0000000 | 000000 |
4601 | 0.7 | Bottle | 0.004" | 50 sec. | 24 hrs. | Thin Liquid (50 cP) | -65° to 160° | Clear | Metal, Plastic, Rubber | 000000 | 00000 |
High-Purity Instant-Bond Adhesives
![](/prerenderstable/mvPRE/contents/gfx/imagecache/758/7586a32-@halfx_637061216328129437.png?ver=imagenotfound)
Use these adhesives, also known as super glue, in applications that are highly sensitive to contaminants. Use an accelerator (sold separately) to shorten the time it takes the adhesive to reach full strength.
Container | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Size, fl. oz. | Type | Max. Gap Size Filled | Begins to Harden | Reaches Full Strength | Consistency (Viscosity) | Temp. Range, °F | Color | Specifications Met | For Joining | Each | |
1 | Bottle | 0.003" | 15 sec. | 8 hrs. | Thin Liquid (30 cP) | -65° to 200° | Clear | USP VI Certified | Composites, Metal, Plastic, Rubber, Wood | 0000000 | 000000 |
1 | Bottle | 0.004" | 15 sec. | 8 hrs. | Thin Liquid (50 cP) | -65° to 200° | Clear | USP VI Certified | Composites, Metal, Plastic, Rubber, Wood | 0000000 | 00000 |
1 | Bottle | 0.006" | 15 sec. | 8 hrs. | Thin Liquid (100 cP) | -65° to 200° | Clear | USP VI Certified | Composites, Metal, Plastic, Rubber, Wood | 0000000 | 00000 |
1 | Bottle | 0.007" | 15 sec. | 8 hrs. | Thin Liquid (500 cP) | -65° to 200° | Clear | USP VI Certified | Composites, Metal, Plastic, Rubber, Wood | 0000000 | 00000 |
1 | Bottle | 0.008" | 15 sec. | 8 hrs. | Thick Liquid (1,500 cP) | -65° to 200° | Clear | USP VI Certified | Composites, Metal, Plastic, Rubber, Wood | 0000000 | 00000 |
Moisture-Resistant Instant-Bond Adhesives
![](/prerenderstable/mvPRE/contents/gfx/imagecache/758/7586a32-@halfx_637061216328129437.png?ver=imagenotfound)
In especially damp or humid environments, these adhesives keep their hold. Also known as super glue. Use an accelerator (sold separately) to shorten the time it takes the adhesive to reach full strength.
Certificates with a traceable lot number and product shelf life are available for these products. Download certificates from ORDER HISTORY after your order ships.
Container | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Size, fl. oz. | Type | Max. Gap Size Filled | Begins to Harden | Reaches Full Strength | Consistency (Viscosity) | Temp. Range, °F | Color | For Joining | Each | |
Loctite® Adhesives | |||||||||||
4981 | 0.7 | Bottle | 0.007" | 50 sec. | 24 hrs. | Thin Liquid (500 cP) | -65° to 220° | Clear | Metal, Plastic, Rubber | 0000000 | 000000 |
Wicking Instant-Bond Adhesives
![](/prerenderstable/mvPRE/contents/gfx/imagecache/758/7586a32-@halfx_637061216328129437.png?ver=imagenotfound)
These thin liquids, also known as super glue, flow into small gaps. Use an accelerator (sold separately) to shorten the time it takes the adhesive to reach full strength.
Container | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Size, fl. oz. | Type | Max. Gap Size Filled | Begins to Harden | Reaches Full Strength | Consistency (Viscosity) | Temp. Range, °F | Color | For Joining | Each | |
Loctite® Adhesives | |||||||||||
4014 | 0.7 | Bottle | 0.002" | 30 sec. | 24 hrs. | Thin Liquid (3 cP) | -65° to 220° | Clear | Metal, Plastic, Rubber | 0000000 | 000000 |
4061 | 0.7 | Bottle | 0.004" | 15 sec. | 24 hrs. | Thin Liquid (20 cP) | -65° to 180° | Clear | Metal, Plastic, Rubber | 0000000 | 00000 |
4061 | 16 | Bottle | 0.004" | 15 sec. | 24 hrs. | Thin Liquid (20 cP) | -65° to 180° | Clear | Metal, Plastic, Rubber | 00000000 | 000000 |
Low-Odor Wicking Instant-Bond Adhesives
![](/prerenderstable/mvPRE/contents/gfx/imagecache/758/7586a32-@halfx_637061216328129437.png?ver=imagenotfound)
Form bonds without the strong odor of other instant-bond adhesives. These adhesives, also known as super glue, have a thin consistency that allows them to flow into small gaps. Use an accelerator (sold separately) to shorten the time it takes the adhesive to reach full strength.
Certificates with a traceable lot number and product shelf life are available for these products. Download certificates from ORDER HISTORY after your order ships.
Container | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Size, fl. oz. | Type | Max. Gap Size Filled | Begins to Harden | Reaches Full Strength | Consistency (Viscosity) | Temp. Range, °F | Color | For Joining | Each | |
Loctite® Adhesives | |||||||||||
4081 | 0.7 | Bottle | 0.002" | 50 sec. | 24 hrs. | Thin Liquid (7 cP) | -65° to 160° | Clear | Metal, Plastic, Rubber | 0000000 | 000000 |
Instant-Bond Adhesive Gel for Hard-to-Bond Materials
![](/prerenderstable/mvPRE/contents/gfx/imagecache/b05/b05-generic-tube-digital@halfx_637046069205013202.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/b05/b05-generic-single-syringe-digital@halfx_637046154259134601.png?ver=imagenotfound)
Quickly adhere hard-to bond surfaces with these adhesives, also known as super glue. These thick gels fill gaps between parts and won't drip on vertical surfaces. Use an accelerator (sold separately) to shorten the time it takes the adhesive to reach full strength.
Dispense adhesives in syringes with a dispensing gun (sold separately).
PR Gel works especially well on plastic and rubber.
454 and 4541 are suitable for porous and dissimilar materials.
Certificates with a traceable lot number and product shelf life are available for these products. Download certificates from ORDER HISTORY after your order ships.
Container | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Size, fl. oz. | Type | Max. Gap Size Filled | Begins to Harden | Reaches Full Strength | Consistency (Viscosity) | Temp. Range, °F | Color | For Joining | Each | |
Loctite® Adhesives | |||||||||||
4541 | 0.3 | Syringe | 0.01" | 15 sec. | 24 hrs. | Gel (29,000 cP) | -65° to 180° | Clear | Cardboard, Fabric, Metal, Plastic, Rubber, Wood | 0000000 | 000000 |
4541 | 0.7 | Tube | 0.01" | 15 sec. | 24 hrs. | Gel (29,000 cP) | -65° to 180° | Clear | Cardboard, Fabric, Metal, Plastic, Rubber, Wood | 00000000 | 00000 |
Light-Activated Instant-Bond Adhesives
![](/prerenderstable/mvPRE/contents/gfx/imagecache/758/7586a32-@halfx_637061216328129437.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/b05/b05-generic-syringe2-digital@halfx_637046179616097463.png?ver=imagenotfound)
For easy positioning, these adhesives begin to harden only when exposed to light.
Thick liquids fill large gaps and won't drip on vertical surfaces. Thin liquids flow to fill small gaps between close-fitting parts.
Use adhesives in syringes with a dispensing gun with plunger (sold separately).
Container | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Size, fl. oz. | Type | Max. Gap Size Filled | Begins to Harden | Reaches Full Strength | Light Intensity Requirements to Reach Full Strength | Cure Type | Consistency (Viscosity) | Temp. Range, °F | Color | For Joining | Each | |
Loctite® Adhesives | |||||||||||||
3301 | 0.84 | Syringe | __ | 5 sec. | 90 sec. | 15 sec. @ 6 mW/cm2 | UV Light, Visible Light | Thin Liquid (150 cP) | -65° to 300° | Light Yellow | Glass, Metal, Plastic | 00000000 | 000000 |
3311 | 0.84 | Syringe | __ | 5 sec. | 90 sec. | 15 sec. @ 6 mW/cm2 | UV Light, Visible Light | Thin Liquid (300 cP) | -65° to 300° | Light Yellow | Glass, Metal, Plastic | 00000000 | 00000 |
3341 | 0.84 | Syringe | __ | 5 sec. | 30 sec. | 10 sec. @ 6 mW/cm2 | UV Light, Visible Light | Thin Liquid (530 cP) | -65° to 300° | Light Yellow | Metal, Plastic | 00000000 | 00000 |
3556 | 0.84 | Syringe | __ | 5 sec. | 1 hrs. | 5 sec. @ 500 mW/cm2 | Visible Light | Thick Liquid (5,000 cP) | -65° to 300° | Light Yellow | Metal, Plastic | 0000000 | 000000 |
3922 | 0.84 | Syringe | __ | 10 sec. | 30 sec. | 10 sec. @ 6 mW/cm2 | UV Light, Visible Light | Thin Liquid (300 cP) | -65° to 300° | Light Yellow | Glass, Metal, Plastic, Rubber | 00000000 | 00000 |
4311 | 1 | Bottle | 0.008" | 5 sec. | 24 hrs. | 10 sec. @ 30 mW/cm2 | UV Light, Visible Light | Thin Liquid (1,050 cP) | -65° to 200° | Green | Ceramic, Composites, Glass, Metal, Plastic, Rubber, Wood | 000000 | 00000 |
Flexible Light-Activated Instant-Bond Adhesives
![](/prerenderstable/mvPRE/contents/gfx/imagecache/b05/b05-generic-syringe2-digital@halfx_637046179616097463.png?ver=imagenotfound)
These adhesives stay pliable for flexible bonds that resist cracking. For easy positioning, they begin to harden only when exposed to light.
1700A257 and 2454N1 fluoresce under UV light for easy inspection.
Use adhesives in syringes with a dispensing gun with plunger (sold separately).
Container | ||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Size, fl. oz. | Type | Max. Gap Size Filled | Begins to Harden | Reaches Full Strength | Light Intensity Requirements to Reach Full Strength | Cure Type | Consistency (Viscosity) | Elongation | Temp. Range, °F | Color | For Joining | Each | |
Loctite® Adhesives | ||||||||||||||
3201 | 0.84 | Syringe | __ | 5 sec. | 90 sec. | 20 sec. @ 6 mW/cm2 | UV Light, Visible Light | Thick Liquid (3,750 cP) | 265% | -65° to 300° | Light Yellow | Metal, Plastic | 0000000 | 000000 |
3211 | 0.84 | Syringe | __ | 5 sec. | 90 sec. | 18 sec. @ 6 mW/cm2 | UV Light, Visible Light | Thick Liquid (11,250 cP) | 260% | -65° to 300° | Light Yellow | Glass, Metal, Plastic | 0000000 | 00000 |
3321 | 0.84 | Syringe | 0.02" | 5 sec. | 90 sec. | 15 sec. @ 6 mW/cm2 | UV Light, Visible Light | Thick Liquid (5,500 cP) | 250% | -65° to 300° | Light Yellow | Glass, Metal, Plastic, Rubber | 00000000 | 00000 |
3936 | 0.84 | Syringe | __ | 5 sec. | 30 sec. | 15 sec. @ 6 mW/cm2 | UV Light, Visible Light | Thick Liquid (11,000 cP) | 300% | -65° to 300° | White | Metal | 00000000 | 00000 |
Dispensing Gun with Plunger | 0000000 | Each | 000000 |
Slow-Set Epoxy Structural Adhesives
To allow time to adjust and position parts, these epoxies remain workable for at least 90 minutes. The strongest and most weather- and chemical-resistant structural adhesives, epoxies work especially well on metals.
The size listed is the combined total of the two parts. Use cartridges with a dispensing gun and mixer nozzle to simultaneously mix and dispense adhesives.
M-121HP bonds dissimilar materials and withstands rapid changes in temperature.
![](/prerenderstable/mvPRE/contents/gfx/imagecache/746/7467a216p1-b05-@halfx_637170213624727653.png?ver=imagenotfound)
Container | Strength | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Size, fl. oz. | Type | Begins to Harden | Reaches Full Strength | Shear, lbs./sq. in. | Peel | Mix Ratio | Consistency (Viscosity) | Temp. Range, °F | Specifications Met | For Joining | Each | |
M-121HP | 1.69 | Cartridge | 2 hrs. | 24 hrs. | 4,800 | Not Rated | 2:1 | Thick Liquid (11,000 cP) | -65° to 300° | ISO 10993 | Metal, Metal to Plastic, Metal to Rubber, Metal to Glass, Plastic, Plastic to Rubber, Plastic to Glass, Rubber, Rubber to Glass, Ceramic, Glass | 0000000 | 000000 |
Optically Clear Epoxy Structural Adhesives
For invisible bond lines, these adhesives dry clear. Epoxies are the strongest and most weather- and chemical-resistant structural adhesives. Choose an epoxy that hardens quickly for fast repairs, or one that hardens slowly to allow more time for positioning.
The size listed is the combined total of the two parts. Use cartridges with a dispensing gun and mixer nozzle to simultaneously mix and dispense adhesives.
![](/prerenderstable/mvPRE/contents/gfx/imagecache/746/7467a216p1-b05-@halfx_637170213624727653.png?ver=imagenotfound)
Container | Strength | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Size, fl. oz. | Type | Begins to Harden | Reaches Full Strength | Shear, lbs./sq. in. | Peel, lbs./in. wd. | Mix Ratio | Consistency (Viscosity) | Temp. Range, °F | For Joining | Each | |
M-31CL | 1.69 | Cartridge | 30 min. | 24 hrs. | 3,100 | Not Rated | 2:1 | Thick Liquid (6,000 cP) | -65 to 300° F | Metal, Plastic, Rubber, Glass | 0000000 | 000000 |
Urethane Structural Adhesives
Urethane adhesives are the most flexible, so they bond dissimilar materials and damp vibration.
The size listed is the combined total of the two parts. Use 1.64 fl. oz. and 1.69 fl. oz. cartridges with a dispensing gun and mixer nozzle to simultaneously mix and dispense adhesives.
![](/prerenderstable/mvPRE/contents/gfx/imagecache/746/7467a216p1-b05-@halfx_637170213624727653.png?ver=imagenotfound)
Container | Strength | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Size, fl. oz. | Type | Begins to Harden | Reaches Full Strength | Shear, lbs./sq. in. | Peel | Mix Ratio | Consistency (Viscosity) | Temp. Range, °F | Color | For Joining | Each | |
UK M-11FL | 1.69 | Cartridge | 10 min. | 24 hrs. | 1,850 | Not Rated | 1:1 | Thick Liquid (3,800 cP) | -65° to 250° | Clear | Metal, Metal to Plastic, Metal to Glass, Plastic, Plastic to Glass, Glass | 0000000 | 000000 |
Insulating Adhesives for Electronics
![](/prerenderstable/mvPRE/contents/gfx/imagecache/758/7586a32-@halfx_637061216328129437.png?ver=imagenotfound)
Tack wires to coil forms or secure and insulate hardware on printed circuit boards with these instant-bond adhesives. They require an accelerator to create adhesion.
Certificates with a traceable lot number and product shelf life are available for these products. Download certificates from ORDER HISTORY after your order ships.
Container | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Size, fl. oz. | Type | Begins to Harden | Reaches Full Strength | Thermal Conductivity, W/m-K | Consistency | Temp. Range, °F | Color | For Joining | Each | |
Loctite® Adhesives | |||||||||||
382 | 0.7 | Bottle | 30 sec. | 24 hrs. | 0.1 | Thick Liquid | -65° to 210° | Clear | Metal, Plastic, Rubber | 00000000 | 000000 |
444 | 0.7 | Bottle | 30 sec. | 24 hrs. | 0.1 | Thin Liquid | -65° to 180° | Clear | Metal, Plastic, Rubber | 0000000 | 00000 |
Loctite® Adhesives with Accelerator | |||||||||||
382 | 0.7 | Bottle | 30 sec. | 24 hrs. | 0.1 | Thick Liquid | -65° to 210° | Clear | Metal, Plastic, Rubber | 00000000 | 00000 |
444 | 0.7 | Bottle | 30 sec. | 24 hrs. | 0.1 | Thin Liquid | -65° to 180° | Clear | Metal, Plastic, Rubber | 0000000 | 00000 |
Heavy Duty High-Purity Coatings for Electronics
![](/prerenderstable/mvPRE/contents/gfx/imagecache/746/74695a35p1-b05-digital@halfx_637074240815415798.png?ver=imagenotfound)
This coating is formulated for use in sensitive applications such as manufacturing semiconductors. Thinner than potting compounds, the coating flows easily into small spaces between electrical components. Use it to secure and insulate hardware on printed circuit boards. Rigid and wear resistant, has excellent chemical and moisture resistance, withstands a wide range of temperatures, and provides excellent electrical insulation. It requires a gun and a mixer nozzle (each sold separately) to dispense.
Certificates with a traceable lot number and product shelf life are available for these products. Download certificates from ORDER HISTORY after your order ships.
Dry Time | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Container Size | Consistency | Touch, min. | Overall, hrs. | Dielectric Strength, V/mil | Temp. Range, °F | For Use On | Color | Each | |
Loctite® Coatings—Extra Hard | ||||||||||
M-21HP | 1.7 fl. oz. | Paste | 20 | 24 | 500 | -65° to 300° | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Titanium, Silver, Plastic, Composites, Fiberglass | Off-White | 0000000 | 000000 |
Mixer Nozzles for Two-Part Adhesive Cartridges | |||
---|---|---|---|
Mixer Nozzle for 1.7 fl. oz. Cartridges | 00000000 | Each | 00000 |
Two-Part Adhesive Dispensing Guns | |||
---|---|---|---|
Dispensing Gun for 1.7 fl. oz. Cartridges | 00000000 | Each | 000000 |
Heavy Duty High-Purity Light-Activated Coatings for Electronics
![](/prerenderstable/mvPRE/contents/gfx/imagecache/167/1674n11p1-b05-digital@halfx_637074244605787508.png?ver=imagenotfound)
This coating is formulated for use in sensitive applications such as manufacturing semiconductors. Thinner than potting compounds, it flows easily into small spaces between electrical components. The coating begins to harden when exposed to UV light. Use it to secure and insulate hardware on printed circuit boards. It requires a gun (sold separately) to dispense.
Dry Time | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Container Size, fl. oz. | Consistency | Touch, sec. | Overall, hrs. | Dielectric Strength, V/mil | Temp. Range, °F | Light Intensity Requirements to Reach Full Strength | For Use On | Color | Each | |
Loctite® Coatings—Medium Soft | |||||||||||
5240 | 0.85 | Thick Liquid | 10 | 72 | 533.4 | -65° to 195° | 60 seconds per side @ 70 mW/cm2 | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Silver, Titanium, Fiberglass, Composites | Green | 0000000 | 000000 |
Dispensing Guns for Syringes | 0000000 | Each | 000000 |