Filter by
DFARS Compliance
About Hinges
More
Heavy Duty Hinges without Holes
Half-Surface Mount
Surface Mount
Thick leaves and a large diameter pin make these hinges good for use with heavy doors. Bearings allow these hinges to open and close heavy doors smoothly. The hinges are load rated; capacity is based on two hinges per door. All have a nonremovable pin to deter tampering.
304 stainless steel hinges are more corrosion resistant than primed carbon steel. They also have good chemical resistance.
Half-surface mount hinges attach with one cutout (mortise) on the side of the door.
For technical drawings and 3-D models, click on a part number.
Door Leaf | Frame Leaf | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Ht. | Wd. | Ht. | Wd. | O'all Wd. | Leaf Thick. | Range of Motion | Daily Openings | Capacity, lbs. | Pin Dia. | Material | Pin Material | Each | |
Half-Surface Mount | |||||||||||||
Primed Carbon Steel | |||||||||||||
| 5" | 3 1/4" | 5" | 2" | 5 1/4" | 0.500" | 180° | 350 | 1,000 | 3/4" | Primed 1215 Carbon Steel | Steel | 0000000 | 0000000 |
Surface Mount | |||||||||||||
Primed Carbon Steel | |||||||||||||
| 5" | 2" | 5" | 2" | 4" | 0.500" | 180° | 350 | 1,000 | 3/4" | Primed 1215 Carbon Steel | Steel | 0000000 | 000000 |
| 5" | 3 1/4" | 5" | 2" | 5 1/4" | 0.500" | 180° | 350 | 1,000 | 3/4" | Primed 1215 Carbon Steel | Steel | 0000000 | 000000 |
| 5" | 3 1/4" | 5" | 3 1/4" | 6 1/2" | 0.500" | 180° | 350 | 2,000 | 3/4" | Primed 1215 Carbon Steel | Steel | 0000000 | 000000 |
Primed Low-Carbon Steel | |||||||||||||
| 5" | 2" | 5" | 2" | 4" | 0.500" | 180° | 270 | 2,000 | 3/4" | Primed Low-Carbon Steel | Steel | 00000000 | 000000 |
| 5" | 2" | 5" | 2" | 4" | 0.500" | 180° | 340 | 800 | 3/4" | Primed Low-Carbon Steel | Stainless Steel | 00000000 | 000000 |
| 5" | 3" | 5" | 3" | 6" | 0.500" | 180° | 270 | 2,000 | 3/4" | Primed Low-Carbon Steel | Steel | 00000000 | 000000 |
| 5" | 3" | 5" | 3" | 6" | 0.500" | 180° | 340 | 800 | 3/4" | Primed Low-Carbon Steel | Steel | 00000000 | 000000 |
304 Stainless Steel—Dull | |||||||||||||
| 5" | 2" | 5" | 2" | 4" | 0.500" | 180° | 340 | 800 | 3/4" | 304 Stainless Steel | Stainless Steel | 00000000 | 000000 |
| 5" | 3" | 5" | 2" | 5" | 0.500" | 180° | 340 | 800 | 3/4" | 304 Stainless Steel | Stainless Steel | 00000000 | 000000 |
| 5" | 3" | 5" | 3" | 6" | 0.500" | 180° | 270 | 2,000 | 3/4" | 304 Stainless Steel | Steel | 00000000 | 000000 |