About Hinges
More
About Rod Ends
More
Narrow-Profile Lift-Off Hinges without Holes
Range of
Motion
Hinge with 360°
Range of Motion
Also known as bullet hinges, these hinges are the right size for tight spaces and narrow frames. The hinge pin is permanently attached to the frame leaf so you can quickly lift the door off the hinge without removing the pin. Hinges with a 360° range of motion have a small triangular surface to weld to the door frame. Hinges with a 270° range of motion have a body that welds directly to the door frame.
Aluminum hinges are about half the weight of low-carbon steel. They have mild corrosion resistance.
Internally Threaded High-Speed Ball Bearing Rod Ends
A double row of precision ball bearings allows high speeds and smooth operation. Seals keep lubricant in and dirt out.
Cadmium-plated alloy steel rod ends offer moderate corrosion resistance. They have an oversized shank, which is one size larger than the ID, to handle greater stress. Their lubricant meets MIL-PRF-81322. These rod ends won't require ongoing lubrication.
| Shank Thread Size  | ID | Max. Ball Swivel | O'all Wd. | O'all Thick. | Shank Center Lg. | Shank Thread Lg. | Static Radial Load Cap., lbs. | Specifications Met | Shank Thread Direction | Each | |
Ball Joints with Oversized Shank | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
Cadmium-Plated Alloy Steel | |||||||||||
| 5/16"-24 | 1/4" | 20° | 15/16" | 9/16" | 1 7/16" | 3/4" | 1,700 | MIL-PRF-81322, MS21153 | Right Hand | 0000000 | 0000000 |
High-Speed Ball Bearing Rod Ends
A double row of precision ball bearings allows high speeds and smooth operation. Rod ends are made of cadmium- or zinc-plated steel, which both offer moderate corrosion resistance. Seals keep lubricant in and dirt out.
Cadmium-plated steel rod ends have lubricant that meets MIL-PRF-81322. They won’t require ongoing lubrication. Those with an oversized shank have a shank that is one size larger than the ID to handle greater stress.
| Shank Thread Size | ID | Max. Ball Swivel | O'all Wd. | O'all Thick. | Shank Center Lg. | Shank Thread Lg. | Static Radial Load Cap., lbs. | Specifications Met | Shank Thread Direction | Each | |
Ball Joints with Oversized Shank | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
Cadmium-Plated Alloy Steel | |||||||||||
| 3/8"-24 | 1/4" | 20° | 15/16" | 9/16" | 1 7/8" | 1 1/8" | 1,700 | MIL-PRF-81322, MS21151 | Right Hand | 0000000 | 0000000 |
Internally Threaded Thrust-Rated Ball Joint Rod Ends
An innovative body design keeps the ball from being pushed out when supporting thrust loads. Rod ends are zinc-plated steel for moderate corrosion resistance and have a self-lubricating polyurethane insert.
Static Load Cap., lbs. | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Shank Thread Size | ID | Max. Ball Swivel | O'all Wd. | O'all Thick. | Shank Center Lg. | Shank Thread Lg. | Radial | Thrust | Temp. Range, °F | Material | Shank Thread Direction | Each | |
| 5/16"-24 | 5/16" | 36° | 15/16" | 1/2" | 1 7/16" | 11/16" | 1,900 | 770 | -40° to 175° | Zinc-Plated Carbon Steel | Right Hand | 00000000 | 000000 |
Thrust-Rated Ball Joint Rod Ends
An innovative body design keeps the ball from being pushed out when supporting thrust loads. Rod ends are zinc-plated steel for moderate corrosion resistance and have a self-lubricating polyurethane insert.
Static Load Cap., lbs. | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Shank Thread Size | ID | Max. Ball Swivel | O'all Wd. | O'all Thick. | Shank Center Lg. | Shank Thread Lg. | Radial | Thrust | Temp. Range, °F | Material | Choose a Shank Thread Direction | Each | |
| 5/16"-24 | 5/16" | 36° | 15/16" | 1/2" | 1 11/16" | 1 3/16" | 1,900 | 770 | -40° to 175° | Zinc-Plated Carbon Steel | 0000000 | 000000 | |
Fully Threaded Rod End Bolts
For maximum mounting flexibility, cut the fully threaded shaft to whatever length you need. Also known as swing bolts and eyebolts, rod end bolts have no moving parts. They're designed to make pivoting or hinge movements in applications that don't need to compensate for misalignment.
| Shank Thread Size | ID | O'all Wd. | Shank Center Lg. | Shank Thread Lg. | O'all Thick. | Tensile Strength, psi | Specifications Met | Material | Each | |
Right-Hand Threaded Shank | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| 7/16"-14 | 7/16" | 15/16" | 6" | 5 1/4" | 7/16" | 60,000 | ASTM A521 Class CA | Black-Oxide Carbon Steel | 0000000 | 00000 |
Chemical-Resistant Clevis Rod Ends
In addition to offering superior chemical resistance, these lightweight, fiber-reinforced nylon rod ends also reduce noise and vibration. Also called yoke-end linkages, they support pivoting movement along one axis when threaded onto shafts, rods, valve pistons, and other assemblies.
| Shank Thread Size | ID | Jaw Opening Wd. | O'all Wd. | Shank Center Lg. | Shank Thread Lg. | Jaw Center Lg. | Tensile Strength, psi | Temp. Range, °F | Includes | Shank Thread Direction | Specifications Met | Each | |
Nylon Plastic | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 7/16"-20 | 7/16" | 15/32" | 15/16" | 1 29/32" | 23/32" | 15/16" | 34,000 | -20° to 175° | Clevis Pin, Retaining Clip | Right Hand | DIN 71752 | 0000000 | 000000 |