We will reply to your message within an hour.
More
For light duty spray-down applications, attach these wash guns to any standard garden hose.
These durable wash guns are typically used for frequent washdowns and cleanup.
Connect these guns to your garden hose and automatically dispense solution from the attached bottle instead of dragging around a siphon hose.
These wash guns have a high maximum pressure, so use them with pressure washers and high-pressure spray systems.
Use these guns to clean as well as apply chemicals and solvents.
The powerful combination of air and water creates a high-velocity, atomized spray without needing high pressure. These guns also can be used to siphon.
With a high maximum pressure and quick-disconnect nozzle connection, these wash guns work with pressure washers and high-pressure spray systems and it’s easy to swap out their nozzles.
Clean hard-to-access areas by extending the reach of your quick-disconnect wash gun.
Attach one of these brooms to a garden hose to sweep away dirt and dust—its water jets turn your hose water into pressurized water for quick, easy cleaning.
Connect these cleaners to existing steam lines to remove dirt, grease, and heavy oils from most surfaces.
Combine the power of steam and detergent—siphon detergent from a drum and use the control panel to regulate the steam/detergent mixture and change the temperature and flow rate.
Clean and sanitize surfaces with the power of steam—with or without detergents and other chemicals.
These nozzles produce a flat, thin spray pattern. They're good for general cleaning, washing, etching, foam control, and applying coatings.
A quick-disconnect hose fitting on these nozzles means you can remove and replace them easily to change spray patterns and angles.
Spray is deflected at a narrow angle to create the highest impact of all our flat spray nozzles.
The spray is deflected at a steep angle to produce a low-impact, extra-wide spray.
Drill a hole anywhere along a pipe and snap on these nozzles. Spray tips can be quickly and easily removed for cleaning and replacement.
A check valve prevents the nozzle from dripping when it is turned off. Spray tips can be removed for cleaning and replacement.
These nozzles have replaceable tips that are removable with a quarter-turn.
Save time in applications where you often need to replace worn nozzles. These nozzles consist of a base and a nozzle, so you can replace the tip with just a quarter turn.
Spray a precise, concentrated, high-velocity stream longer distances than other spray patterns to handle tough cleaning applications.
The large square coverage area makes these nozzles a good choice for chemical processing as well as for cooling applications.
These nozzles project their spray at a right angle from their threaded connection.
Particles in liquid won’t clog these nozzles because of their unique internal and external design.
With a unique internal and external design, these nozzles let particles in liquid pass through instead of clogging.
A low flow rate makes these nozzles good for distributing fluids, cooling, washing, and rinsing.
Fogging nozzles provide smaller, more atomized spray droplets than misting nozzles.
A check valve prevents the nozzle from dripping when it is turned off.
These nozzles provide a uniform distribution of droplets.
A wide spray angle provides a larger coverage area and produces a finer, more atomized spray than full-cone nozzles.
Create small, atomized spray droplets for cooling, moistening, and humidifying applications. These nozzles have a check valve that prevents dripping when they’re turned off
A unique internal and external design lets particles in liquid pass through instead of clogging, leading to higher volumes of mist.
Mixing compressed air and liquid together, these nozzles create an ultra-fine, uniform spray without using high pressures. Also known as air-atomizing nozzles, they make droplets that are less than half the size of other fogging nozzles.
Spray a precise, concentrated, high-velocity stream longer distances than flat spray nozzles to handle tough cleaning applications.
These nozzles produce a flat, thin spray pattern.
No need to juggle multiple nozzles with different spray angles—just turn the cover to adjust the spray angle from 0° to 80°.
Push the nozzle out for lower pressures and pull it back for higher pressures. Turn the cover to adjust the spray angle from 0° to 25° or 75°.
The superior cleaning ability of a solid stream has been combined with rotating spray action for excellent coverage.
Instead of swapping between nozzles, turn the cover on these nozzles to change their spray angle. They have quick-disconnect couplings for easy detachment.
No need to switch between nozzles—push these nozzles in and pull them out to change their pressure level, and twist their cover to adjust the spray angle between 0° and 40°. Their quick-disconnect hose connection makes attaching and removing them easy.
Combining rotation with a solid stream, these nozzles spray in a 25° hollow cone shape to cover a wide area. They’re easy to remove thanks to their quick-disconnect hose connection.
To effectively rinse tanks, drums, and small vessels, these nozzles spray in multiple directions.
Certified by 3-A to meet sanitary design standards, these nozzles have a 360° spray pattern to effectively rinse tanks and vessels in food, beverage, and pharmaceutical environments.
Avoid clogs while rinsing tanks, drums, and small vessels. These nozzles have a unique internal and external design, so particles in liquid pass through instead of getting stuck.
By circulating their spray, these nozzles clean faster with more even coverage and less water than stationary tank-washing nozzles.
Use these nozzles with detergent that’s diluted in water to create a rotating, multi-directional foam spray for effectively rinsing tanks, drums, and small vessels.
Internal gears create controlled motion as fluid moves through these nozzles, maintaining speed and producing large droplets to efficiently clean heavily soiled or large-diameter tanks.
FM approved for use in fire-protection applications, these nozzles produce a heavy, coarse spray to quickly put out fires.
Specifically designed for steam, these nozzles direct steam better than standard spray nozzles.
Also known as siphon guns, these spray air and liquids at the same time. Push the lever and the airflow creates suction that draws water, cleaning solution, or other liquids through the hose.