Install these inserts into plastic parts to create a secure base for fasteners.

Made from brass, these inserts are electrically conductive, nonmagnetic, and have good corrosion resistance.

These aluminum inserts are 70% lighter than brass inserts, electrically conductive, and nonmagnetic. They have good corrosion resistance, which is comparable to brass but not as good as stainless steel.

These aluminum inserts are 70% lighter than brass inserts, electrically conductive, and nonmagnetic. They have good corrosion resistance, which is comparable to brass but not as good as stainless steel.

These inserts are made to stringent military specifications.

The strongest key-locking inserts we offer, these inserts are made to stringent military specifications.

These inserts come with an installation tool. Drive the keys into the surrounding material for a more secure hold than thread-locking inserts.

Made of Nitronic 60 stainless steel, these inserts prevent the screw from binding or sticking without any coating or lubricant that could contaminate particle-free environments.

Made of nickel alloy, these inserts are more resistant to acids and salt water than stainless steel inserts.

Without a prong to break off and retrieve, these inserts are often used where debris could cause damage.

Assortments include various sizes of helical inserts and a tap, a drill bit, and an installation tool for each thread size.

Made of 18-8 stainless steel, these inserts have better corrosion resistance than black-phosphate steel.

These assortments include various sizes of thread-locking inserts.

Adhesive on both the internal and external threads keeps these inserts in place and holds screws tight.

Made from brass, these inserts are nonmagnetic, mildly corrosion resistant, and electrically conductive.

These 18-8 stainless steel inserts have excellent resistance to chemicals and may be mildly magnetic.

Steel inserts have high strength for durability.

The most corrosion resistant tee nut inserts we offer, these inserts stand up to chemicals and salt water.

Ridges on the barrel of these inserts make them less likely to split hardwood than inserts with prongs. They're often used in wood that has been cut across the growth rings.

Use where vibration is a concern—these tee nut inserts have distorted threads that lock screws in place.

These nuts have good chemical resistance and may be mildly magnetic.

The most corrosion resistant twist-resistant rivet nuts we offer, these stand up to chemicals.

A hex-shaped body provides the highest twist resistance of any rivet nut.

About twice as strong as aluminum rivet nuts, these low-profile rivet nuts have a cadmium or tin-zinc plating for corrosion resistance.

These low-profile rivet nuts are one-third the weight of steel and have mild corrosion resistance.

About twice as strong as aluminum rivet nuts, these rivet nuts are zinc plated for mild corrosion resistance.

A PVC foam seal under the flange keeps liquids and gasses from leaking between the nut and the surrounding material.

Weld these nuts to stainless steel surfaces.

Projections on the base concentrate the weld and provide room for heat to dissipate.

These nuts can be used in channels and tight spaces where round-base weld nuts won't fit.

Weld these nuts to stainless steel surfaces.

Weld these nuts to flat and uneven uncoated steel surfaces for a strong permanent hold.

Square weld nuts have more weld points than hex weld nuts for a stronger hold. Use them on flat surfaces.

These nuts have three mounting holes to accept screws and rivets for use with thin materials.

Stainless steel adhesive-mount nuts have excellent corrosion resistance in most environments.

Stronger than stainless steel, these nuts are comparable in strength to Grade 9 bolts.

These 18-8 stainless steel anchors have good chemical resistance.

Drive these tools with a hammer until the thicker portion of the tool makes contact with the anchor, causing it to expand.

These 316 stainless steel anchors have excellent resistance to chemicals and salt water.

Also known as caulk-in anchors, these stay secure when there's not much material to hold.

The fastest way to install shallow-hole female-threaded anchors. Just push the tip of the tool into the anchor and turn the tool with a power drill.

Often referred to as four-way expansion anchors, these expand in four directions to resist loosening from vibration.

A pivoting toggle bar creates a strong hold.

Add a stud to thin material when you only have access to one side.

18-8 stainless steel studs have good chemical resistance and may be mildly magnetic. Also known as hanger bolts, use them to hang, mount, and fasten parts to wood structures.

Pass these studs through a hole and weld them in place.

Use these hex drive screws and binding barrels as a low-profile alternative to standard nut and bolt combinations.

Place the tip of these tools into an insert and strike them with a hammer to drive the keys into the material. They’re compatible with Keensert® inserts.

Screw an insert onto these tools and drive them a quarter to half-turn below the material's surface. They're compatible with helical inserts that have a prong.

Place the tip of these tools into an insert and strike a light blow to the tool’s head. Then turn the tools counterclockwise with pressure to extract the insert.

Thread these tools into an insert and turn counterclockwise to extract.

Compatible with Tap-Lok inserts.

Black-oxide steel has a dull shine for areas where appearance is a concern.

Yellow zinc-plated steel is more corrosion resistant than nickel-plated steel.

Made of 303/304 stainless steel, these mounts resist corrosion from water and most chemicals.

Punch-out holes in the base let you bolt down these mounts to keep your equipment stationary.

Nickel-plated steel has some corrosion resistance.

Black-oxide steel has a dull shine for areas where appearance is a concern.

Made entirely of 316 stainless steel, these mounts are our most resistant to corrosion from chemicals, solvents, and water.

Punch-out holes in the base let you bolt down these mounts to keep your equipment stationary.

A hex nut at the base of the stud allows for easy height adjustment.

These mounts have a cushion on top to provide padding between your furniture and the mount.

Able to withstand temperatures up to 350° F, these have the highest maximum temperature of our plastic mounts.

Slip these inserts into tubular legs to quickly add threads for attaching leveling mounts. They’re often used in the legs of light equipment and furniture.

Spring action provides significant isolation of vibration and noise.

The polyurethane base on these mounts resists solvents, gasoline, and oil, while the metal plate sustains heavy loads.

Higher deflection ratings translate to greater vibration and shock isolation than our other vibration-damping leveling mounts.