Internal mounting bosses enable you to attach panels or DIN rail inside the enclosures using self-tapping screws. Made of polycarbonate, these nonconductive enclosures resist denting, chipping, and cracking.

Stainless steel enclosures are more corrosion resistant than aluminum for use in environments with corrosive liquids.

These enclosures have thicker walls than standard aluminum enclosures, but are still a lightweight yet durable alternative to stainless steel.

PVC enclosures are nonconductive and chemical resistant, withstanding solvents, alkalies, and acids.

Mounting feet make attachment to machines and walls hassle-free.

Made of polycarbonate, these enclosures resist denting, chipping, and cracking.

Fiberglass enclosures are stronger than polycarbonate enclosures and nonconductive.

Mounting feet make attachment to machines and walls hassle-free. These enclosures are small and lightweight for use with sensors, switches, testing devices, and circuit boards.

Protect electronics from washdowns in food plants and other sanitary environments. These enclosures mount directly into walls to protect wiring and reduce the surface area that needs to be cleaned. Standard-size push-button holes are already installed, saving you the effort of measuring and cutting holes yourself.

Protect electronics from washdowns in food plants and other sanitary environments. These enclosures have standard-size push-button holes, saving you the effort of measuring and cutting holes yourself. A shroud hangs over the holes to guard buttons from damage and accidental pushing.

Made of polycarbonate, these enclosures resist denting, chipping, and cracking better than stainless steel enclosures.

House electrical components in these general purpose enclosures.

Small and lightweight, these enclosures are used with sensors, switches, and testing devices.

Keep electronics safe from harmful contact with hands and tools while still allowing air and moisture to enter.

Choose a body and two matching end caps to make your own dust-tight or watertight enclosure.

Keep components safe from rain, snow, and ice. These enclosures are rated NEMA 3R for protection from dirt, falling liquids, and light splashing.

With an overhanging top and a NEMA 3RX rating, these enclosures guard electronics from snow, rain, and sleet as well as dirt and light splashing.

Mounted horizontally, such as on machinery or rooftops, these enclosures protect wiring and other electrical components from rain, snow, and ice thanks to their overhanging top.

Fasten these enclosures to machine control panels or walls without exposing the contents to wet and oily environments.

Able to withstand periodic submersion in water, these enclosures offer our highest level of protection from liquids. They’re made of fiberglass to resist impact and corrosion from solvents, alkalis, and mild acids.

Attach these enclosures to machine panels and walls by their mounting feet—no need to open the cover and expose sensors, switches, and other electronics in wet locations. Made of aluminum, they’re lighter in weight than stainless steel yet resist rusting from water.

Holes in the cover allow easy installation of push buttons, switches, and indicating lights.

Mount these enclosures directly to machine control panels in wet environments and view the contents without opening them.

Check on the contents inside these enclosures from every angle without opening them in wet environments.

Control access to these enclosures with a key-operated lock.

Inspect components without opening the cover.

Suitable for installing in the ground or for use in wet environments, these direct burial enclosures are rated NEMA 6P for protection from dirt, washdowns, corrosion, and water submersion.

Holes in the cover of these enclosures allow easy installation of push buttons, switches, and indicating lights.

Make your push buttons, switches, and indicating lights more visible and ergonomic to use. Enclosures mount on either of two sides, creating a 30° or 60° slanted surface.

Bury these enclosures in the ground or in concrete. They withstand freeze/thaw conditions and have an open bottom for water drainage.

These enclosures reduce electromagnetic interference (EMI) and radio frequency interference (RFI), which can cause electrical problems like flickering monitors, interrupted data signals, and unwanted radio noise.

For use in hazardous locations, these enclosures are rated NEMA 7 and 9 and meet UL Class I, Divisions 1 and 2, Groups B, C, and D; Class II, Divisions 1 and 2, Groups E, F, and G; and Class III, Divisions 1 and 2.

Snap these enclosures onto 35 mm DIN rail and lock them in place.

Rated NEMA 12 for protection from dirt and oil/coolant dripping.

For use in enclosures and panels where components require battery power, these enclosures have contacts for AA and 9-volt batteries.

The unique shape of these enclosures provides a handle to hold scanners, detectors, and remote switches.

A 9-volt battery fits inside a compartment in these enclosures to power testing devices and other hand-held instruments.

These boxes have an open back to accommodate extra-deep low-voltage devices.

Use the built-in connections to attach conduit without using fittings.

Close off unused outlets.

Close off unused outlets.

Add depth to your outlet box.

Knockouts allow you to modify these boxes to fit your application.

Mount these boxes to the outside of an enclosure to access a programmable logic controller or other networked device without opening the enclosure.

Knockouts allow you to modify these boxes to fit your application.

These boxes come ready to use with receptacles and/or light switches installed.

Close off unused switches.

Knockouts allow you to modify these boxes to fit your application.

With built-in threaded connections, these boxes allow you to attach conduit without using fittings.

Protect the edges of carpet surrounding your outlet boxes.

Close off unused outlets.

Close off unused outlets.

Exposure to rain, snow, and wet conditions won't damage these corrosion-resistant boxes.

Add depth to your weatherproof outlet box.

Mount servers, automation controls, and computers in these open racks, they make it easy to organize and swap out components. Less bulky than electronics cabinets, you can line up these racks to maximize limited storage space. All are compatible with standard 19" wide components.

Protect wire and cable from dust, dirt, and oil/coolant dripping—this raceway is rated NEMA 12.