Constructed of a carbide tip brazed onto a ground steel shank, these tools are more wear resistant than high-speed steel tools.

The diamond tip on these tools offers superior cutting performance on nonferrous and nonmetallic materials, such as aluminum, copper, fiberglass, and plastic.

A thinner cutting edge and thicker top edge give these blades a T‐shape profile that moves chips away from the cut and reduces friction for fast cutting.

A carbide tip brazed onto a ground steel shank makes these tools more wear resistant than high-speed steel tools.

Cut small grooves inside a workpiece for insertion and removal of O-rings.

The carbide tip brazed onto the ground steel shanks of these tools is more wear resistant than high-speed steel.

When cutting threads in nonferrous and nonmetallic materials, such as aluminum, copper, fiberglass, and plastic, diamond tips provide superior cutting performance.

A carbide tip brazed onto a ground steel shank makes these tools less brittle than solid carbide tools.

The long steel shank on these tools can reach farther inside the workpiece than standard boring tools.

Insert the square shank of these tools into the slot of a boring tool holder and use them to enlarge existing holes to precise diameters.

Contour the interior wall of a hollow workpiece.

These sets contain some of the smallest boring tools we offer.

The long steel shank on these tools can reach farther inside the workpiece than standard boring tools.

Place a cutoff blade into one of these holders to keep it in place in the lathe.

Use these carbide inserts for general purpose turning.

Heat resistant and shaped for turning stainless steel specifically, these inserts will last longer than inserts for multiple materials.

Cut aluminum, copper, brass, and other non-ferrous materials with these premium inserts.

Made of an abrasion-resistant carbide designed for turning cast iron, these inserts will last longer than inserts for multiple materials.

Replace clamps, screws, seats, and slotted pins in carbide insert holders.

These tools come with carbide inserts installed. When one edge of the insert dulls, rotate it to use a sharp edge.

Combine a holder and carbide insert to perform cutoff and grooving tasks on a lathe.

Mount blade-style holders to a lathe tool post or turret.

Fit these holders directly into a lathe tool post or appropriately sized holder without the need for a tool block.

The rounded nose on these inserts contours the outside of the workpiece and cuts grooves with rounded edges.

Install these inserts into a compatible holder to cut external or internal threads on a workpiece.

These inserts can cut grooves on both the outside and inside of a workpiece depending on the holder used.

These tools come with one high-speed steel insert for use on steel and stainless steel and one high-speed steel insert for use on softer materials, such as aluminum and brass. When one point of an insert dulls, rotate it to use a sharp point.

Pair one of these inserts with a compatible boring carbide insert holder with coolant hole.

Deliver coolant through the holder to keep workpieces cool while boring tough materials, such as steel, stainless steel, and nickel-based alloys.

Contour the interior wall of a hollow workpiece when you pair a holder with a compatible insert.

Consistently position workpieces in a three-jaw lathe chuck by installing a chuck stop. These stops enable short workpieces to extend beyond the chuck's jaws, providing additional clearance.

Also known as scroll chucks, these are self centering—all three jaws move in unison, centering the workpiece as they close.

Also known as lathe chuck keys, the long T-handle on these wrenches provides the leverage to open tight lathe chucks.

Made from hardened steel, these jaws have a long service life even when performing heavy machining such as roughing cuts.

Secure jaws to a CNC lathe chuck with industry standard 1.5 mm × 60° serrations or wider 3 mm × 60° serrations.

The mandrels in these sets have an expanding screw that widens the end of the mandrel for a tight hold on the inside of a workpiece.

The sleeve on these mandrels expands to hold a range of diameters for better versatility than solid and expanding-end mandrels.

These light duty centers are for intermittent use on manual lathes.

Also known as bull-nose centers, these have a wide head to hold pipe and large-diameter tubing.

Attach these tools to a manual lathe.

Pair these knurls with a knurling tool to create patterns on a workpiece for an improved grip.

Work faster by using two knurls at the same time.

Block chips while maintaining an unobstructed view of the workpiece.

Grip square-shank lathe tools.

Four flat head screws lock down round-shank tools in a precision-ground bore for increased rigidity over other round-shank tool holders.

Securely hold cutoff blades in a quick-change tool post.

These holders work with any 5C collet to rigidly grip drill bits, taps, end mills, and other tools.

Increase the diameter of boring bars, drill bits, and other shank-style cutting tools to securely fit CNC lathe tool blocks.