About Plastic
More
Aluminum-Covered Polyethylene (LDPE)
- Face Color: Black
- Temperature Range: 0° to 170° F
- Tensile Strength: 8,740 psi (Good)
- Impact Strength: Not Rated
- Hardness: Not Rated
- For Use Outdoors: Yes
- Specifications Met: ASTM E84 5/15 for Flame and Smoke, FDA Compliant 21 CFR 177.1380, UL 94 V-0
A layer of soft LDPE is sandwiched between two thin layers of aluminum for strength and rigidity. Use these sheets outdoors as signs, wall panels, canopies, and building cladding. One side is painted black; the painted side is normally exposed.
For technical drawings and 3-D models, click on a part number.
Flexible Polyethylene (LDPE) Sheets and Bars
One of the softest and most flexible plastics we offer, these sheets and bars are more formable than HDPE. Use them to create parts for tanks and laboratory equipment. LDPE is easy to machine and will absorb shock without breaking.
For technical drawings and 3-D models, click on a part number.
- Color: White
- Maximum Temperature: 120° F
- Tensile Strength: 1,400-3,190 psi (Poor)
- Impact Strength: No Break (Excellent)
- Hardness: Durometer 41D-46D (Medium Soft)
- For Use Outdoors: No
| Thick. | Thick. Tolerance | Each | |
6" × 6" | |||
|---|---|---|---|
| 1/2" | -0.025" to 0.025" | 00000000 | 00000 |
| 5/8" | -0.031" to 0.031" | 00000000 | 00000 |
| 3/4" | -0.038" to 0.038" | 00000000 | 00000 |
| 1" | -0.05" to 0.05" | 00000000 | 00000 |
| 1 1/2" | -0.15" to 0.15" | 00000000 | 00000 |
| 2" | 0" to 0.2" | 00000000 | 00000 |
12" × 12" | |||
| 1/16" | -0.003" to 0.003" | 00000000 | 0000 |
| 3/32" | -0.005" to 0.005" | 0000000 | 0000 |
| 1/8" | -0.006" to 0.006" | 00000000 | 0000 |
| 3/16" | -0.009" to 0.009" | 00000000 | 0000 |
| 1/4" | -0.013" to 0.013" | 00000000 | 0000 |
| 3/8" | -0.019" to 0.019" | 00000000 | 00000 |
| 1/2" | -0.025" to 0.025" | 00000000 | 00000 |
| 5/8" | -0.031" to 0.031" | 0000000 | 00000 |
| 3/4" | -0.038" to 0.038" | 00000000 | 00000 |
| 1" | -0.05" to 0.05" | 00000000 | 00000 |
| 1 1/2" | -0.15" to 0.15" | 00000000 | 00000 |
| 2" | 0" to 0.2" | 0000000 | 000000 |
24" × 24" | |||
| 1/16" | -0.003" to 0.003" | 00000000 | 0000 |
| 3/32" | -0.005" to 0.005" | 0000000 | 00000 |
| 1/8" | -0.006" to 0.006" | 00000000 | 00000 |
| 3/16" | -0.009" to 0.009" | 00000000 | 00000 |
| 1/4" | -0.013" to 0.013" | 00000000 | 00000 |
| 3/8" | -0.019" to 0.019" | 00000000 | 00000 |
| 1/2" | -0.025" to 0.025" | 00000000 | 00000 |
| 5/8" | -0.031" to 0.031" | 0000000 | 00000 |
| 3/4" | -0.038" to 0.038" | 00000000 | 00000 |
| 1" | -0.05" to 0.05" | 00000000 | 000000 |
| 1 1/2" | -0.15" to 0.15" | 00000000 | 000000 |
| 2" | 0" to 0.2" | 0000000 | 000000 |
48" × 48" | |||
| 1/16" | -0.003" to 0.003" | 00000000 | 00000 |
| 3/32" | -0.005" to 0.005" | 0000000 | 00000 |
| 1/8" | -0.006" to 0.006" | 00000000 | 00000 |
| 3/16" | -0.009" to 0.009" | 00000000 | 00000 |
| 1/4" | -0.013" to 0.013" | 00000000 | 00000 |
| 3/8" | -0.019" to 0.019" | 00000000 | 000000 |
| 1/2" | -0.025" to 0.025" | 00000000 | 000000 |
| 5/8" | -0.031" to 0.031" | 0000000 | 000000 |
| 3/4" | -0.038" to 0.038" | 00000000 | 000000 |
| 1" | -0.05" to 0.05" | 00000000 | 000000 |
| 1 1/2" | -0.15" to 0.15" | 00000000 | 000000 |
| 2" | 0" to 0.2" | 0000000 | 00000000 |
- Color: White
- Maximum Temperature: 120° F
- Tensile Strength: 1,400-3,190 psi (Poor)
- Impact Strength: No Break (Excellent)
- Hardness: Durometer 41D-46D (Medium Soft)
- For Use Outdoors: No
Multipurpose Plastic Selector Packs
You'll get one piece of each material listed, except nylon where you'll get two pieces (one piece of nylon 6/6 and one piece of cast nylon).
For technical drawings and 3-D models, click on a part number.
| Material | Wd. | Lg. | Pkg. Qty. | Pkg. | |
| ABS Plastic, Delrin® Acetal Plastic, HDPE Plastic, LDPE Plastic, Noryl PPO Plastic, Nylon Plastic, Polyester Plastic, Polystyrene Plastic, Rexolite Polystyrene Plastic, UHMW Plastic | 2" | 2" | 11 | 0000000 | 000000 |