These brightly-colored levels are easy to spot.

Align and measure at the same time with these levels that have rulers on the front and side.

Lightweight yet strong and durable, these bamboo levels won't stick to wet cement. Also known as masonry levels.

These levels have a sturdy aluminum housing.

These levels come with a calibration certificate that's traceable to NIST and includes the test measurements that confirm accuracy.

These levels come with a calibration certificate that's traceable to NIST and includes the test measurements that confirm accuracy.

These levels come with a calibration certificate traceable to NIST that states they've passed a test for accuracy.

These levels come with a calibration certificate traceable to NIST that states they've passed a test for accuracy.

These levels come with a calibration certificate traceable to NIST that states they've passed a test for accuracy.

Mount these levels to a wall or other vertical surface and they will indicate when you're level on the horizontal plane.

Slip these levels into a drilled hole.

A telescoping eyepiece provides 2X magnification.

Commonly seen in the hands of surveyors, sight levels rotate 360° to find horizontal level when grading for elevation.

These fiberglass rods are nonconductive.

Use this 90° level to position posts and corners.

These levels project three dots simultaneously to verify your installation is straight, level, and plumb.

Whether you’re hanging a drop ceiling or aligning bench tops, use the cross-hair lines of these lasers to install material at the right height.

Mark a dot up to 500 feet across your plant.

Mark a dot up to 1,000 feet across your plant.

Fine-tune the size of the laser dot.

These lasers are sized for mounting on machinery to ensure tools are properly positioned.

Projecting a light that's even and bright the entire length, these lasers create a line that can be measured from end to end.

Slip this tool into your pocket so it's on hand to align belts, pulleys, chain, and sprockets.

Position these lasers directly on a flat surface.

Two chain clamps position two Starrett test indicators at different points along a shaft to find any misalignment.

Kits include two chain clamps, an inspection mirror, and a case.

Use stylus movement to check for misalignment. Kits include two sets of mounting brackets with adjustment knobs.

These angle indicators also show level on the display.

These angle indicators come with a calibration certificate that's traceable to NIST and includes the test measurements that confirm accuracy.

Align guide rails or lay pipe at specific angles from a flat surface.

These angle indicators have a horizontal leveling vial and can measure angles between 0° and 180°.

Also known as angle finders, use these to gauge the angle of any surface.

Measure 40° front-to-back tilt in addition to side-to-side tilt.

A dot laser extends the working distance 200 feet beyond the tool length. This tool has two digital displays that invert when turned upside down; one shows the base angle and the other shows the moveable arm angle.

Replace your try square, miter square, depth gauge, height gauge, center-point finder, and level. The blade on these squares meets Fed. Spec. GGG-R-791H, which establishes uniform standards for accuracy, graduations, and size.

Use these squares in place of your try square, miter square, depth gauge, height gauge, center-point finder, and level.

A titanium coating protects the blade against scratches and wear.

Fold these vertical rulers for convenient storage and transport.

Connect continuous segments to create a ruler up to 10 ft. long.

Paste changes color when it’s submerged to indicate the gasoline level in a tank.

Use this color-changing paste to determine water level in a tank.

A window with an indicator line clearly shows the measurement.

Take precise depth measurements in small holes and slots.

All gauges have zero-position memory, also known as absolute (ABS) positioning, which retains the measuring position when the gauge is turned off.

Measure depths up to 8" using connectable extension rods.

These gauges come with a calibration certificate traceable to NIST that states they've passed a test for accuracy.

Check measurements at a glance.

Black-oxide steel has a dull shine for areas where appearance is a concern.

Made of yellow zinc-plated steel, these metric leveling mounts are more corrosion resistant than nickel-plated steel leveling mounts.

Made of 303/304 stainless steel, these mounts resist corrosion from water and most chemicals.

Made entirely of 316 stainless steel, these mounts have superior corrosion resistance.

Broader, stronger threads enable faster adjustments and higher load capacities than standard V-shaped threads.

Punch-out holes in the base let you bolt down these metric mounts to keep your equipment stationary.

Well-suited to damp environments, these metric mounts have a stainless steel stud and nut for corrosion resistance.

An offset mounting hole allows for installation without moving your machine.

Black-oxide steel has a dull shine for areas where appearance is a concern.

Made of 303 stainless steel, these mounts resist corrosion from water and most chemicals.

Made entirely of 316 stainless steel, these mounts are our most resistant to corrosion from chemicals, solvents, and water.

Well-suited to damp environments, these mounts have a stainless steel nut for excellent corrosion resistance.

Use these metric mounts on heavy machines and equipment.

Meant for light duty applications, these mounts are not rated for capacity.

Made of 303 stainless steel, these metric mounts resist corrosion from water and most chemicals.

Able to withstand temperatures up to 350° F, these have the highest maximum temperature of our plastic mounts.