M12 Levels | McMaster-Carr

Filter by

System of Measurement

Mount Movement

Thread Length

Mount Type

Base Diameter

Thread Pitch

Base Material

Base Shape

Stud Material

Height

With Cushion

Material

Performance

Capacity per Mount

Thread Type

Cushion Material

Hex Nut Material

REACH

RoHS

Compliant with Exemptions

Base Finish

Nickel Plated

Zinc Plated

Zinc Yellow-Chromate Plated

U.S.–Mexico–Canada Agreement (USMCA) Qualifying

Yes

Shape

Point

Round

DFARS Specialty Metals

Exempt

Export Control Classification Number (ECCN)

EAR99

Forward

How can we improve?

99 Products

About Leveling Mounts

Choose the right leveling mounts for your floor conditions, equipment weight, and vibration-control needs.

Stay-Put Swivel Leveling Mounts with Threaded Stud


Without Cushion	With Cushion

Bolt down machines so they don’t creep across the floor or tip over. These mounts have punch-out holes for securing equipment that you don’t need to move. The ball-and-socket joint in the base swivels to compensate for slightly sloped and pitted floors. For mounting versatility, you can install these mounts in either threaded holes or unthreaded through holes at the bottom of equipment.

Glass-Filled Nylon Base and Zinc-Plated Steel Stud—These mounts are suitable for damp environments, but they won’t hold up to high-pressure washdowns and cleaners that contain harsh chemicals.

Glass-Filled Nylon Base and 303 Stainless Steel Stud—The choice for most wet locations, these mounts can withstand repeated washdowns without corroding. However, unlike 316 stainless steel mounts, they won't hold up to harsh chemical cleaning solutions.

316 Stainless Steel Base—Our most corrosion-resistant metal mounts, these hold up in just about any environment. They won’t degrade or become pitted, even when exposed to harsh cleaners and chemicals.

Rubber Cushion—A cushion under the base protects floors from scrapes and gouges.

					Mounting Holes				Without Cushion				With Rubber Cushion
	Thread Size	Thread Lg., mm	Swivel Range of Motion	Base Dia., mm	No. of	Fasteners Included	Dia., mm	Ctr.-to-Ctr. Lg., mm	Cap. per Mount, lb.	Overall Ht., mm		Each	Cap. per Mount, lb.	Overall Ht., mm	Cushion Material		Each
Glass-Filled Nylon Base and Zinc-Plated Steel Stud



		M12 × 1.75 mm	76	7.5°	51	2	No	6.4	33.8	4,000	105	6992K14	00000	4,000	106.6	Neoprene	6992K38	000000


		M12 × 1.75 mm	76	7.5°	102	2	No	12.5	68.8	5,000	109	6992K132	00000	—	—	—	———	0
		M12 × 1.75 mm	76	7.5°	102	2	No	11.9	68.8	—	—	———	0	5,000	110.6	Neoprene	6992K391	00000
		M12 × 1.75 mm	102	7.5°	51	2	No	6.4	33.8	4,000	130	6992K15	00000	4,000	131.6	Neoprene	6992K39	00000
		M12 × 1.75 mm	102	7.5°	76	2	No	8.9	55.9	5,000	130	6992K143	00000	5,000	131.6	Neoprene	6992K418	00000
		M12 × 1.75 mm	102	7.5°	102	2	No	11.9	68.8	5,000	135	6992K144	00000	5,000	136.6	Neoprene	6992K443	00000
		M12 × 1.75 mm	152	7.5°	51	2	No	6.4	33.8	4,000	181	6992K16	0000	4,000	182.6	Neoprene	6992K41	00000
		M12 × 1.75 mm	152	7.5°	76	2	No	8.9	55.9	5,000	181	6992K17	00000	—	—	—	———	0
		M12 × 1.75 mm	152	7.5°	102	2	No	11.9	68.8	5,000	185	6992K18	00000	5,000	186.6	Neoprene	6992K43	00000
		M12 × 1.75 mm	203	7.5°	51	2	No	6.4	33.8	4,000	232	6992K166	00000	4,000	233.6	Neoprene	6992K452	00000
		M12 × 1.75 mm	203	7.5°	76	2	No	8.9	55.9	—	—	———	0	5,000	233.6	Neoprene	6992K459	00000


		M12 × 1.75 mm	203	7.5°	102	2	No	11.9	68.8	5,000	236	6992K187	00000	5,000	237.6	Neoprene	6992K467	00000


		Glass-Filled Nylon Base and 303 Stainless Steel Stud



				M12 × 1.75 mm	76	7.5°	51	2	No	6.4	33.8	4,000	105	6992K66	00000	4,000	106.6	Neoprene	6992K85	00000


				M12 × 1.75 mm	102	7.5°	76	2	No	8.9	55.9	5,000	130	6992K612	00000	—	—	—	———	0
				M12 × 1.75 mm	102	7.5°	102	2	No	11.9	68.8	5,000	135	6992K613	00000	—	—	—	———	0
				M12 × 1.75 mm	152	7.5°	51	2	No	6.4	33.8	4,000	181	6992K68	00000	4,000	182.6	Neoprene	6992K87	00000
				M12 × 1.75 mm	152	7.5°	102	2	No	11.9	68.8	5,000	185	6992K71	00000	5,000	186.6	Neoprene	6992K89	00000


				316 Stainless Steel Base and Stud



						M12 × 1.75 mm	60	6°	50	2	No	6.6	38	3,100	71	2531K605	00000	—	—	—	———	0


						M12 × 1.75 mm	100	6°	50	2	No	6.6	38	3,100	111	2531K606	00000	—	—	—	———	0

Swivel Leveling Mounts with Threaded Stud

Without Cushion

With Cushion

Keep equipment level on slightly sloped and pitted floors with mounts that have a ball-and-socket joint in the base. For mounting versatility, you can install them in either threaded holes or unthreaded through holes at the bottom of equipment.

Nickel-Plated Steel Base—With a shiny appearance, these mounts create a finished look. They're best for dry environments since the nickel plating offers minimal corrosion resistance.

Zinc-Yellow-Chromate-Plated Steel Base—More corrosion resistant than nickel-plated steel, these mounts are suitable for damp environments. However, they won’t hold up to chemical cleaners, high-pressure washdowns, and other harsh conditions like stainless steel can.

303 Stainless Steel Base—The choice for most wet locations, these mounts can withstand repeated washdowns without corroding. However, they won't hold up to cleaning solutions that contain harsh chemicals like 316 stainless steel can.

Rubber Cushion—A cushion under the base grips surfaces so vibrating equipment doesn't slide. It also protects floors from scrapes and gouges.

					Without Cushion				With Rubber Cushion
	Thread Size	Thread Lg., mm	Swivel Range of Motion	Base Dia., mm	Cap. per Mount, lb.	Overall Ht., mm		Each	Cap. per Mount, lb.	Overall Ht., mm	Cushion Material		Each
Nickel-Plated Steel Base and Stud



		M12 × 1.75 mm	51	7.5°	48	4,950	79	6111K654	000000	3,700	83	Natural Rubber	6111K665	000000


		Zinc-Yellow-Chromate-Plated Steel Base and Stud



				M12 × 1.5 mm	51	7.5°	48	4,950	79	6301K212	00000	—	—	—	———	0


				M12 × 1.75 mm	51	7.5°	48	4,950	79	6301K74	00000	3,740	83	Natural Rubber	6301K82	00000


				303 Stainless Steel Base and Stud



						M12 × 1.75 mm	51	7.5°	48	4,950	79	6301K89	00000	3,740	83	Natural Rubber	6301K114	00000


						316 Stainless Steel Base and Stud



								M12 × 1.75 mm	51	7.5°	48	4,950	79	6301K34	00000	—	—	—	———	0

Rigid Leveling Mounts with Threaded Stud

Style 1

Style 3

Level equipment on uneven floors. Install these mounts in threaded holes to level equipment on uneven floors. Use a locknut (not included) to install mounts in unthreaded through holes.

Zinc-Plated Steel Base—These mounts are suitable for damp environments, but they won’t hold up to high-pressure washdowns and cleaners that contain harsh chemicals.

Nylon Base—These mounts are economical yet resistant to grease, oil, and chemicals that pool on the floor.

Plastic Cushion—The plastic bottom won't scratch or scuff floors when you’re moving equipment.

Rubber Cushion—A cushion under the base grips surfaces so vibrating equipment doesn't slide. It also protects floors from scrapes and gouges.

	Thread Size	Thread Lg., mm	Cap. per Mount, lb.	Base Dia., mm	Overall Ht., mm	Cushion Material	Pkg. Qty.		Pkg.
Zinc-Plated Steel Base and Stud with Rubber Cushion



	1	M12 × 1.75 mm	51	250	61	76	Neoprene	1	6823N41	00000


	Zinc-Plated Steel Base and Stud with Plastic Cushion



			1	M12 × 1.75 mm	51	250	61	76	Nylon	1	62805K56	0000


			1	M12 × 1.75 mm	51	500	71	76	Nylon	1	62805K58	0000
			1	M12 × 1.75 mm	102	250	61	127	Nylon	1	62805K57	0000
			1	M12 × 1.75 mm	102	500	71	127	Nylon	1	62805K59	0000
			1	M12 × 1.75 mm	102	500	81	127	Nylon	1	62805K63	00000
			1	M12 × 1.75 mm	152	500	81	178	Nylon	1	62805K64	00000


			303 Stainless Steel Base and Stud with Plastic Cushion



					1	M12 × 1.75 mm	102	250	61	127	Nylon	1	1942K185	00000


					1	M12 × 1.75 mm	102	500	81	130	Nylon	1	1942K186	00000


					Nylon Base and Stud



							3	M12 × 1.75 mm	25	250	30	39	—	1	2814K31	0000


							3	M12 × 1.75 mm	50	250	30	64	—	1	2814K32	0000
							3	M12 × 1.75 mm	80	250	30	94	—	1	2814K33	0000

Swivel Leveling Mounts with Threaded Hole

Without Cushion

With Cushion

Keep equipment level on slightly sloped and pitted floors with mounts that have a ball-and-socket joint in the base. Add your own stud to create a custom-length mount that you can install in either threaded holes or unthreaded through holes.

Nickel-Plated Steel Base—With a shiny appearance, these mounts create a finished look. They're best for dry environments since the nickel plating offers minimal corrosion resistance.

Rubber Cushion—A cushion under the base grips surfaces so vibrating equipment doesn't slide. It also protects floors from scrapes and gouges.

					Without Cushion				With Rubber Cushion
	Thread Size	Thread Dp., mm	Swivel Range of Motion	Base Dia., mm	Cap. per Mount, lb.	Overall Ht., mm		Each	Cap. per Mount, lb.	Overall Ht., mm	Cushion Material		Each
Nickel-Plated Steel Base



		M12 × 1.75 mm	11.1	7.5°	48	4,960	29	6103K604	000000	3,745	32	Natural Rubber	6103K612	000000


		Zinc-Yellow-Chromate-Plated Steel Base



				M12 × 1.75 mm	11	7.5°	48	4,950	29	6120K34	0000	3,740	32	Natural Rubber	6120K42	00000


				303 Stainless Steel Base



						M12 × 1.75 mm	11.1	7.5°	48	4,950	29	6120K49	00000	3,745	32	Neoprene	6120K75	00000

Load-Rated Reinforced Threaded-Hole Bumpers


Style 1	Style 2

Tested to ensure they’ll bear the weight of your application, these bumpers support everything from a 50-pound saw to a 2,000-pound air compressor. They also help reduce vibration and protect whatever they're mounted to. All have a metal base plate for added strength and a longer life than all-rubber bumpers. Twist them onto a threaded stud on your equipment, or pair them with your own stud to create a custom-length bumper.

Natural Rubber with Steel Base Plate


Style 1	Style 2

These bumpers absorb impact well enough for most applications. However, they're not for use outdoors and break down when exposed to oil and harsh chemicals.

Hardness Rating—The harder the bumper, the better it withstands impact and abrasion over time. The softer the bumper, the more cushioning it provides for objects made of glass, soft metal, and other fragile materials. Bumpers with a medium rating offer a balance of impact resistance and cushioning.

	Thread
	Size	Dp., mm	OD, mm	Ht., mm	Max. Load, lb.	Deflection @ Cap.	Hardness	Hardness Rating	Color	Temp., ° F	Nonmarking	For Use Outdoors		Each
Style 1



		M12 × 1.75 mm	12	75	30	1,770	0.3"	Durometer 55A	Medium	Black	-40 to 170	Yes	No	9377K392	000000


		M12 × 1.75 mm	12	75	40	1,500	0.39"	Durometer 55A	Medium	Black	-20 to 150	Yes	No	93115K771	00000
		M12 × 1.75 mm	12	75	40	2,060	0.39"	Durometer 70A	Hard	Black	-40 to 170	Yes	No	9377K395	00000
		M12 × 1.75 mm	12	75	50	1,250	0.49"	Durometer 55A	Medium	Black	-20 to 150	Yes	No	93115K781	00000


		Style 2



				M12 × 1.75 mm	12	75	89	570	0.79"	Durometer 70A	Hard	Black	-40 to 170	Yes	No	9377K486	00000

Natural Rubber with Corrosion-Resistant Stainless Steel Base Plate

Style 1

These bumpers absorb impact well enough for most applications. However, they're not for use outdoors and break down when exposed to oil and harsh chemicals.

Unlike bumpers with a steel base plate, these stand up to repeated washdowns without corroding.

	Thread
	Size	Dp., mm	OD, mm	Ht., mm	Max. Load, lb.	Deflection @ Cap.	Hardness	Hardness Rating	Color	Temp., ° F	Nonmarking	For Use Outdoors		Each
Style 1



		M12 × 1.75 mm	12	75	30	1,770	0.3"	Durometer 55A	Medium	Black	-40 to 170	Yes	No	9377K438	000000


		M12 × 1.75 mm	12	75	40	1,500	0.39"	Durometer 55A	Medium	Black	-20 to 150	Yes	No	93115K772	00000

Shock-Absorbing Swivel Leveling Mounts with Threaded Stud

Absorb sudden impacts from heavy machinery, such as punch presses, die cutters, and generators that jolt as they power on. These mounts have a solid rubber base, similar to a hockey puck, that isolates shock to protect floors and equipment from damage. The base also cuts down on noise and grips the floor so equipment doesn't slide when it's vibrating. The ball-and-socket joint in the base swivels to compensate for slightly sloped and pitted floors. For mounting versatility, you can install these mounts in either threaded holes or unthreaded through holes at the bottom of equipment.

Square Neoprene Base with Zinc-Plated Steel Stud

Image of Product. Front orientation. Leveling Mounts. Shock-Absorbing Swivel Leveling Mounts with Threaded Stud, Square Base.

					Base
Thread Size	Thread Lg.	Cap. per Mount, lb.	Deflection @ Cap.	Swivel Range of Motion	Lg.	Wd.	Overall Ht.		Each
M12 × 1.75 mm	2 5/8"	350	0.13"	7.5°	3"	3"	3 7/16"	63965K71	000000
M12 × 1.75 mm	2 5/8"	700	0.13"	7.5°	3"	3"	3 7/16"	63965K72	00000

Round Neoprene Base with Zinc-Plated Steel Stud

Image of Product. Front orientation. Leveling Mounts. Shock-Absorbing Swivel Leveling Mounts with Threaded Stud, Round Base.

Thread Size	Thread Lg.	Cap. per Mount, lb.	Deflection @ Cap.	Swivel Range of Motion	Base Dia.	Overall Ht.		Each
M12 × 1.75 mm	2 3/8"	500	0.13"	7.5°	3"	3 11/16"	63965K73	000000
M12 × 1.75 mm	2 3/8"	1,000	0.13"	7.5°	3"	3 11/32"	63965K74	00000

Stay-Put Swivel Leveling Mounts with Threaded Stud and Offset Hole

One or more offset mounting holes extend from underneath machines to give you more room to drill and install fasteners. These mounts bolt down to secure equipment that doesn’t need to move and prevent it from creeping or tipping. A ball-and-socket joint in the base swivels to compensate for slightly sloped and pitted floors. For mounting versatility, you can install these mounts in either threaded holes or unthreaded through holes at the bottom of equipment.

Round Base

1 Mounting Hole

With Cushion

304 Stainless Steel Base—The choice for most wet locations, these mounts can withstand repeated washdowns without corroding. However, they won't hold up to cleaning solutions that contain harsh chemicals like 316 stainless steel can.

Rubber Cushion—A cushion under the base protects floors from scrapes and gouges.

					Mounting Holes		With Rubber Cushion
	Thread Size	Thread Lg.	Swivel Range of Motion	Base Dia.	Fasteners Included	Dia.	Cap. per Mount, lb.	Overall Ht.	Cushion Material		Each
304 Stainless Steel Base and Stud







				1 Mounting Hole

				M12 × 1.75 mm	4"	5°	2 15/16"	No	19/32"	2,695	4 7/8"	Buna-N	6221K925	000000

Load-Rated Reinforced Threaded-Stud Bumpers

Style 1

Tested to support the load of your application. These bumpers support a wide range of equipment—from a 50 lb. saw to a 5,000 lb. air compressor. They also help reduce vibration and protect whatever they’re mounted to. All have a metal base plate for added strength and a longer service life than all-rubber bumpers. No separate fasteners are needed—just twist them into a threaded hole.

Natural Rubber with Steel Stud and Base Plate

Style 1

These bumpers absorb impact well enough for most applications. However, they're not for use outdoors and break down when exposed to oil and harsh chemicals.

	Thread
	Size	Lg., mm	OD, mm	Ht., mm	Max. Load, lb.	Deflection @ Cap.	Hardness	Hardness Rating	Color	Temp., ° F	Nonmarking	For Use Outdoors		Each
Style 1



		M12 × 1.75 mm	37	75	25	2,170	0.25"	Durometer 55A	Medium	Black	-40 to 170	No	No	3810N165	000000


		M12 × 1.75 mm	37	75	25	4,670	0.25"	Durometer 70A	Hard	Black	-40 to 170	No	No	3810N166	00000
		M12 × 1.75 mm	37	75	40	1,500	0.39"	Durometer 55A	Medium	Black	-40 to 170	No	No	3810N167	00000
		M12 × 1.75 mm	37	75	40	2,060	0.39"	Durometer 70A	Hard	Black	-40 to 170	No	No	3810N168	00000
		M12 × 1.75 mm	37	75	50	1,250	0.49"	Durometer 50A	Medium	Black	-10 to 150	No	No	93115K981	00000
		M12 × 1.75 mm	37	75	50	3,040	0.49"	Durometer 70A	Hard	Black	-40 to 170	No	No	3810N169	00000

Natural Rubber with Corrosion-Resistant Stainless Steel Stud and Base Plate

Style 1

These bumpers absorb impact well enough for most applications. However, they're not for use outdoors and break down when exposed to oil and harsh chemicals.

Unlike bumpers with steel studs, these handle repeated washdowns without corroding.

	Thread
	Size	Lg., mm	OD, mm	Ht., mm	Max. Load, lb.	Deflection @ Cap.	Hardness	Hardness Rating	Color	Temp., ° F	Nonmarking	For Use Outdoors		Each
Style 1



		M12 × 1.75 mm	37	75	25	2,170	0.25"	Durometer 55A	Medium	Black	-40 to 170	No	No	4720N131	000000

Vibration-Damping Swivel Leveling Mounts with Threaded Stud

With Cushion

A rubber cushion reduces vibration to protect components and extend your machine’s life. For mounting versatility, you can install them in either threaded holes or unthreaded through holes at the bottom of equipment.

Rubber Cushion—In addition to reducing vibration, the cushion grips surfaces so vibrating equipment doesn't slide. It also cuts down on noise and protects floors from scrapes and gouges.

					With Rubber Cushion
	Thread Size	Thread Lg.	Swivel Range of Motion	Base Dia.	Cap. per Mount, lb.	Deflection @ Cap.	Overall Ht.	Cushion Material		Each
304 Stainless Steel Base and Stud



		M12 × 1.75 mm	4 3/4"	7.5°	2 5/8"	500	0.07"	5 11/16"	Buna-N	6221K27	000000


		M12 × 1.75 mm	4 3/4"	7.5°	3 7/8"	1,000	0.12"	6 1/8"	Buna-N	6221K28	00000
		M12 × 1.75 mm	4 3/4"	7.5°	3 7/8"	2,000	0.12"	6 1/8"	Buna-N	6221K29	00000

High-Capacity Press-Fit Leveling Mount Inserts

Rated for high load capacity, use these inserts to connect threaded leveling mounts to machinery, instrument bases, and conveyor equipment with tubular legs. These inserts have pass-through holes that are partially threaded at the base. Tap mounts into place with a rubber hammer.

For Square Legs


Shown with Brass Insert Installed

Plastic with Brass Insert—Move equipment around your workspace and make frequent adjustments without worrying about stripping the brass threads.

	For Leg						Thread
	Outer Lg.	Outer Wd.	Inner Lg.	Inner Wd.	Cap. per Mount, lb.	Overall Ht.	, mm	Size	Type	Dp.	Temp., ° F		Each
Plastic with Brass Insert



		1 1/2"	1 1/2"	1 5/16"	1 5/16"	1,500	1 11/16"	1.75	M12	Metric	1"	-20 to 180	60945K76	00000


		2"	2"	1 3/4"	1 3/4"	2,000	2"	1.75	M12	Metric	1"	-20 to 180	60945K81	0000

For Round Legs


Shown with Brass Insert Installed

Plastic with Brass Insert—Move equipment around your workspace and make frequent adjustments without worrying about stripping the brass threads.

	For Leg				Thread
	ID	OD	Cap. per Mount, lb.	Overall Ht.	, mm	Size	Type	Dp.	Temp., ° F		Each
Plastic with Brass Insert



		1 5/16"	1 1/2"	1,500	1 11/16"	1.75	M12	Metric	1"	-20 to 180	60945K92	00000


		1 13/16"	2"	2,000	1 15/16"	1.75	M12	Metric	1"	-20 to 180	60945K96	0000

Reinforced Threaded-Hole Bumpers

Style 1

With a metal base plate for added strength, these bumpers withstand repeated impacts for a longer service life than all-rubber bumpers. You can also use them as spacers and noise reducers. Twist them onto a threaded stud on your equipment, or pair them with your own stud to create a custom-length bumper.

Multipurpose Neoprene About Multipurpose Neoprene

Style 1

A good choice for oily equipment that's exposed to sunlight, rain, and ozone. These aren't as oil resistant as Buna-N bumpers, but they can be used outdoors.

	Thread
	Size	Dp., mm	OD, mm	Ht., mm	Hardness	Hardness Rating	Color	Temp., ° F	Base Plate Material	Nonmarking	For Use Outdoors		Each
Style 1



		M12 × 1.25 mm	13	32	32	Durometer 40A	Medium Soft	Black	-40 to 200	Steel	No	Yes	9546K223	000000


		M12 × 1.25 mm	13	32	32	Durometer 75A	Hard	Black	-40 to 200	Steel	No	Yes	9546K569	00000
		M12 × 1.75 mm	13	32	32	Durometer 70A	Hard	Black	-40 to 200	Steel	No	Yes	9546K475	00000

Abrasion-Resistant Polyurethane Rubber About Abrasion-Resistant Polyurethane Rubber

Style 1

Our toughest rubber bumpers, they keep their shape even when knocked and scraped by metal and other abrasive materials. They're often used on industrial vehicles, conveyors, and heavy construction equipment.

	Thread
	Size	Dp., mm	OD, mm	Ht., mm	Hardness	Hardness Rating	Color	Temp., ° F	Base Plate Material	Nonmarking	For Use Outdoors		Each
Style 1



		M12 × 1.25 mm	13	32	32	Durometer 40A	Medium Soft	Red	-40 to 200	Steel	No	Yes	9223K25	000000


		M12 × 1.25 mm	13	32	32	Durometer 50A	Medium	Red	-40 to 200	Steel	No	Yes	9223K154	00000
		M12 × 1.25 mm	13	32	32	Durometer 60A	Medium Hard	Red	-40 to 200	Steel	No	Yes	9223K169	00000
		M12 × 1.25 mm	13	32	32	Durometer 85A	Hard	Red	-40 to 200	Steel	No	Yes	9546K225	00000
		M12 × 1.75 mm	13	32	32	Durometer 40A	Medium Soft	Black	-40 to 200	Steel	No	Yes	9546K482	00000
		M12 × 1.75 mm	13	32	32	Durometer 95A	Extra Hard	Black	-40 to 200	Steel	No	Yes	9546K489	00000

Reinforced Threaded-Stud Bumpers with Steel Core

Style 1

Our most durable and impact-resistant bumpers. With a steel core, they withstand repeated impacts for a longer service life than all-rubber bumpers. You can also use them as spacers and noise reducers. No separate fasteners are needed—just twist them into a threaded hole.

Multipurpose Neoprene About Multipurpose Neoprene

Style 1

A good choice for oily equipment that's exposed to sunlight, rain, and ozone. These aren't as oil resistant as Buna-N bumpers, but they can be used outdoors.

	Thread
	Size	Lg., mm	OD, mm	Ht., mm	Overall Ht., mm	Hardness	Hardness Rating	Color	Temp., ° F	Stud Material	Nonmarking	For Use Outdoors		Each
Style 1



		M12 × 1.75 mm	30	32	32	62	Durometer 40A	Medium Soft	Black	-40 to 200	Steel	Yes	Yes	9546K245	000000


		M12 × 1.75 mm	30	32	32	62	Durometer 75A	Hard	Black	-40 to 200	Steel	Yes	Yes	9546K536	00000

Abrasion-Resistant Polyurethane Rubber About Abrasion-Resistant Polyurethane Rubber

Style 1

	Thread
	Size	Lg., mm	OD, mm	Ht., mm	Overall Ht., mm	Hardness	Hardness Rating	Color	Temp., ° F	Stud Material	Nonmarking	For Use Outdoors		Each
Style 1



		M12 × 1.75 mm	30	32	32	62	Durometer 40A	Medium Soft	Red	-60 to 200	Steel	Yes	Yes	9223K37	000000


		M12 × 1.75 mm	30	32	32	62	Durometer 80A	Hard	Red	-60 to 200	Steel	Yes	Yes	9546K246	00000

Static-Control Swivel Leveling Mounts with Threaded Stud


Without Cushion	With Cushion

With a fiberglass-reinforced nylon base, these mounts prevent static buildup and discharge that can harm semiconductors, circuit boards, and other sensitive parts during production. They have a ball-and-socket joint in the base that swivels to keep equipment level on slightly sloped and pitted floors. For mounting versatility, you can install mounts in either threaded holes or unthreaded through holes.

Rubber Cushion—A cushion under the base grips surfaces so vibrating equipment doesn't slide or damage floors. It also dissipates static to prevent buildup and discharge.

								Without Cushion			With Rubber Cushion
	Thread Size	Thread Lg., mm	Cap. per Mount, lb.	Swivel Range of Motion	Base Dia., mm	Surface Resistivity, ohm/sq.	Specs. Met	Overall Ht., mm		Each	Overall Ht., mm	Cushion Material		Each
Fiberglass-Reinforced Nylon Base and Zinc-Plated Steel Stud



		M12 × 1.75 mm	68	3,145	15°	60	1× 10^3	IEC 61340-5-1	101	9961N14	000000	104	Buna-N	9961N19	000000


		M12 × 1.75 mm	98	3,145	15°	60	1× 10^3	IEC 61340-5-1	131	9961N15	00000	134	Buna-N	9961N21	00000