These rugged steel handles provide lasting durability for applications involving frequent positioning, tightening, and holding adjustments. Lift the handle to rotate freely; then release the handle to engage and tighten. These handles are also known as clamping handles.

These rugged steel handles provide lasting durability for applications involving frequent positioning, tightening, and holding adjustments in areas with limited vertical space. Lift the handle to rotate freely; then release the handle to engage and tighten. These handles are also known as clamping handles.

Prevent unintentional changes to equipment settings—when not in use, these handles are disengaged and turn freely. To change the position, push down on the handle and turn. When you release the handle, it disengages once again. These handles are also known as clamping handles.

A soft textured surface provides a comfortable grip for applications involving frequent positioning, tightening, and holding adjustments. Lift the handle to rotate freely; then release the handle to engage and tighten. These handles are also known as clamping handles.

Made of stainless steel with a nitrile mounting seal, these handles are suitable for food-processing applications involving frequent positioning, tightening, and holding adjustments. Lift the handle to rotate freely; then release the handle to engage and tighten. These handles are also known as clamping handles.

With a minimum surface resistance of 10,000 ohms, these handles reduce static electricity that can damage electronic equipment. Also known as clamping handles, use them for applications involving frequent positioning, tightening, and holding adjustments. Lift the handle to rotate freely; then release the handle to engage and tighten.

Attach a ball knob to one of these shafts to create custom handles for operating machinery.

These handles are often used as grips on hand wheels or cranks to operate machinery around food processing lines without the risk of contaminating the food. Install them on a threaded stud.

Also known as quill-feed handles, these handles engage and disengage with a flick of the wrist to speed machining operations—especially when drilling deep holes.

Press fit one of these handles into a shaft, rod, or hand wheel to operate machinery.

Add a pin, rod-end bolt, or other mounting hardware to build a custom assembly. Also known as double cams, these handles have a durable, extra-large handle for clamping on fixture bases, plates, and workpieces. For fast adjustments, push down on the handle and the head applies pressure to quickly draw two parts together.

Use these handles to keep holes aligned or lift several sheets of thin material. They have a plug that expands to grip the edges inside holes. They are not suitable for permanent installation—use only for temporary mounting.

Pull and turn the knob to lock, so it's secure in applications where severe vibration is a concern. Flexible for weaving around obstructions, these ready-to-use cables operate valves, throttle controls, and HVAC damper controls from a distance.

Use the attached knob to control these flexible, ready-to-use cables. Weave them around obstructions to operate valves, throttle controls, and HVAC damper controls from a distance.

A splined core limits contact points on the cable’s liner, so the core slides back and forth smoothly and keeps the cable from twisting. Pair these cables with a knob or lever to operate valves, throttle controls, and HVAC damper controls from a distance. They're flexible for weaving around obstructions.

Mill specific holes or keyways in the hub to meet your specifications or weld in place. Often used on cross-slide tables, these crank handles provide leverage to maximize force for turning and tightening.

Square long shafts can pass through these handles for mounting versatility. Drill a hole in the side of the hub to secure with a set screw. These crank handles provide leverage to maximize force for turning and tightening. They are often used on cross-slide tables.

A combination ratchet arm and revolving-grip crank handle makes frequent machinery adjustments in tight spaces fast and easy.

Smaller than standard push/pull toggle clamps, these are often used for electronics and small fixturing applications.

Secure your workpiece from the side by fully extending the plunger, and push a lever to lock the handle in place.

Moving parts are protected by a metal cover when the clamp is engaged to prevent dirt and dust from clogging the clamp.

A highly durable construction with hardened steel pivot pins and bushings provides a long service life.

Panel mount through a hole with the included nut, or drill and tap a hole to flush mount. A pushing or pulling motion holds workpieces from the side.

Secure these clamps to a rail or bar.

The plunger can be locked at any position along its travel.

Hold workpieces of slightly different thicknesses with one clamp. These clamps automatically adjust to compensate for imperfections or small inconsistencies on the material’s surface.

A nonreflective black oxide finish prevents glare that can interfere with machine vision systems.

The handle locks in a horizontal position for more clearance above the clamp than standard hold-down toggle clamps.

Push the lever to lock the handle and prevent accidental opening.

A highly durable construction with hardened steel pivot pins and bushings provides a long service life.

Push the lever to lock the handle and prevent accidental opening.

Bolt to the side of an object. Often used to clamp lids and covers on containers.

Mount these clamps below a surface.

The handle locks in a horizontal position for more clearance above the clamp.

The base fits into round or square holes on most workholding tables for clamping anywhere on the work surface.

A highly durable construction with hardened steel pivot pins and bushings provides a long service life.

Push the lever to lock the handle and prevent accidental opening.

Pull the lever to slide the clamping arm along the bar; release to lock in place.

The clamping arm slides freely along the bar for quick, one handed positioning. Tighten the screw onto a workpiece and the arm locks in place.

These clamps have twice the capacity of standard fast-action bar clamps.

Attach to your bar clamp to hold material on three sides.

Each arm slides freely for quick, one-handed positioning. They lock when the screws are tightened onto a workpiece.

Also known as J-clamps, these provide additional clearance to reach around obstructions and clamp workpieces in recessed areas.

The jaws move in unison to apply even pressure and prevent twisting.

Apply pressure to the side of a workpiece as well as the top and bottom.

Clamp farther in from the edge of a workpiece than with other C-clamps.

Lighter weight than other metal clamps, these are less likely to bend thin material.

These clamps have twice the capacity of standard C-clamps.

A bright finish makes these clamps easy to see.

Hold pipe and fittings together for tack welding.

With five times the capacity of standard corner clamps, these secure two workpieces at a 90° angle.

To prevent accidental opening, these latches have a safety catch.

A safety catch prevents accidental opening.

To prevent accidental opening, these latches have a safety catch.

Mount these latches on a corner to draw perpendicular surfaces together.

An integrated slide bolt extends into the strike plate to resist pull and vibration from side-to-side, front-to-back, and up-and-down forces.

No need for a strike plate, these latches hook into a lip or notch.

These latches hook into a lip or notch and have an adjustable latching distance to compensate for gasketing and misalignment.

These latches have a safety catch to prevent accidental opening.

Each latch comes with a variety of strike plates for different mounting options.