Fit traditional fluorescent ceiling strip lights with these LED lights, which use energy more efficiently, last longer, and produce less heat.

Also known as strip or channel lights, the ends of these fixtures are designed to be wired together to create long rows of lights.

These lights fit into ceiling cutouts.

Mount these fixtures where you need light but don't have an electrical connection. They automatically turn on when movement is detected and off when an area is unoccupied.

Update standard outlet boxes in closets, hallways, and storage rooms to use LED light.

Also known as pigtail holders. Temporarily wire these sockets to provide light during construction.

Lengthen pull-chain light switches.

Use these lights in large, open areas such as warehouses and manufacturing spaces where the ceiling is up to 30-ft. high.

These lights produce a wide beam of uniform light to fill large, open areas with ceilings up to 18-ft. high.

Suspend or mount with fasteners to the ceiling.

A sealed lens keeps moisture out to protect these lights against washdowns.

Mount these lights flush with ceilings in wet locations—all are sealed to keep out humidity and dripping, splashing, and falling liquids. Unlike recessed can lights, which require a separate housing, these fit directly into a cutout in your ceiling and are held in place by springs.

Connect the hooks to a fixture to suspend lights from the ceiling.

These LED lights have an air-tight seal to protect against contaminants.

A movable head lets you aim light where it’s needed most in areas that don't have electrical power service.

Because these lights are compatible with DeWalt rechargeable batteries, you can keep one type of cordless tool battery on hand. Their heads pivot to aim light where it's needed in areas that don't have electrical power service.

A flexible design allows these lights to be suspended above, wrapped around, or routed through areas on the job site.

Keep excess cord out of the way—the reel locks the cord at any length and retracts it when not in use.

These lights are rated for environments where hazardous material is present.

These IP67 rated lights withstand temporary submersion in a maximum of one meter of water for up to 30 minutes. They're compact for easy transport to job sites with no electrical power.

Rated IP65, these lights are sealed to protect against light washdowns from a garden hose. They have a height-adjustable stand and light heads that pivot up and down to direct light where it's needed.

These flashlights are built to handle everyday use. They have a slip-resistant grip to ensure a secure hold.

The handle opens into a tripod, so you can shine light on your work while keeping your hands free.

Shine light into hard-to-reach spaces with these flexible-arm flashlights.

Plug in these rechargeable flashlights and they’ll automatically light up when the power goes out.

Always have a flashlight on hand—these attach to a key ring.

Free your hands for other work by mounting a flashlight to a nearby surface.

Convert incandescent, halogen, krypton, and xenon Maglite flashlights into LED flashlights to produce more light and consume less battery power.

Turn your mini flashlight into an illuminated magnifying glass.

Small enough to keep in your shirt pocket, these penlights are rated for use in environments where hazardous material is present.

In addition to pivoting 210°, the light heads rotate 360° for directing light exactly where it’s needed. They're rated for use in environments where hazardous material is present.

Because these flashlights are buoyant, they're easy to recover when dropped in the water.

Turn a mini flashlight into a headlamp with these straps.

Safe for use in environments where hazardous material is present.

Gently bend these single-use lightsticks to activate.

These lights cast a narrow beam of light. With a gooseneck arm, they are faster and easier to reposition than articulating-arm lights.

These lights cast a narrower beam than other gooseneck-arm machine lights. Reposition them faster and more easily than articulating-arm lights.

Shine light on machinery and through the sight glass on tanks to inspect food, brewery, chemical, pharmaceutical, and bio-tech processing lines.

Pivot the head to cast a narrow beam of light to exactly where it's needed.

Create a high-intensity lighting system for inspecting small and microscopic parts.

Similar in function to tubular machine lights, except strip machine lights have a flat lens that directs light downward.

Just like traditional tubular lights that illuminate your machine with a bright white light, these lights can also be programmed to switch over to a red or green light for communicating machine status.

Mount these lights into a recessed opening on your machine—they sit flush against the surface for a streamlined appearance.

These low-profile lights stay out of sight when mounted under a cabinet. Use them to free up space on your work surface.

These lights are UL listed for use in hazardous locations where flammable/combustible gases, vapors, and liquids may be present.

Mount these lights near entry doors, loading areas, and driveways to cast an even glow of light.

Mount this light on a pole to illuminate pedestrian areas such as streets and walkways.

Hardwire these lights to a power source.

These lights automatically turn on when movement is detected and off when an area is unoccupied.

These lights swing out from the wall to illuminate loading docks and trailers.

No need for wiring—these lights plug-in with a two-prong plug.

These lights are sealed to protect against humidity, moisture, and dripping and splashing liquids.

Rated NEMA 4X, these lights are protected from corrosion and washdowns.

Communicate a status at a glance by wiring these strip lights to change color when a part is malfunctioning inside your enclosure.

Reduce the glare from reflective surfaces.

Block out stray and unwanted light.

Rated NEMA 4X and 13 for protection from dirt, washdowns, corrosion, and oil/coolant spraying.

Lights have a watertight O-ring seal.

These lights are UL listed for environments where fuels, solvents, acetylene, and other hazardous substances may be present.

The pad below the base absorbs shock and vibration.

Place these lights in full sun and their batteries charge during daylight hours. Lights automatically switch on at dusk and off at dawn.

These lights can switch between continuous, flashing, or revolving.

Carry these lights around with you and place them wherever needed.

Small as hockey pucks, these lightweight strobe lights mount to surfaces and are unobtrusive when they’re turned off.

Easier to spot than other strobe lights, these lights emit bursts of multiple flashes.

Easier to spot than other strobe lights, these lights emit bursts of five flashes per cycle.

A series of four flashes per cycle makes these lights more visible than other strobe lights.

These strobe lights flash multiple times per cycle, making them easier to spot than standard strobe lights.

Screw into a standard medium-base light socket.

Set these portable lights wherever you need a signal light—they don't need to be wired or plugged in.