Choose ball bearings for debris-free environments and when speed is a necessity. They operate with less friction than sleeve bearings, so you can run them at higher speeds.

Outdoor as well as mild chemical environments are no problem for these bearings. They have stainless steel balls for corrosion resistance.

Virtually maintenance free, these bearings have slippery, chemical-resistant liners that don't require added lubrication.

With two bearings mounted in one housing, these sleeve bearings can handle heavier loads than standard mounted linear sleeve bearings.

A ceramic coating makes high speeds as well as rapid acceleration and deceleration possible.

The flanged housing makes these bearings a good solution for vertical linear motion applications.

A ceramic coating makes high speeds as well as rapid acceleration and deceleration possible.

Mount these bearings on a support rail shaft for applications requiring maximum rigidity.

Outdoor as well as mild chemical environments are no problem for these bearings. They have stainless steel balls for corrosion resistance.

With two bearings mounted in a single housing, these bearings have higher load capacities than standard ones. A ceramic liner helps them achieve high speeds as well as rapid acceleration and deceleration.

Use ball bearings in debris-free environments and when speed is a necessity. They operate with less friction than sleeve bearings, so you can run them at higher speeds.

The choice for low-friction motion in high-temperature environments.

Because they usually do not require lubrication, linear sleeve bearings outperform linear ball bearings in dirty environments.

Thinner than standard linear sleeve bearings, these bearings fit where clearance is a concern.

Use these ultra-thin sleeve bearings in high-speed applications where clearance is a concern.

The choice for low-friction motion in high-temperature environments.

Designed to handle heavy loads, these bearings have higher load capacities than comparable standard linear ball bearings for support rail shafts.

Sleeve bearings outperform ball bearings in dirty environments. Use them for low speed applications.

Slide up to two linear ball or sleeve bearings into these housings and secure them with the included internal retaining rings.

These carriages and guide rails are steel.

Designed specifically for use on horizontal surfaces, the contact angle of the ball bearings on the rail allows these carriages to last longer than other carriages.

Made of stainless steel, these carriages and guide rails are more corrosion resistant than steel carriages and guide rails.

Suitable for clean room use, these carriages and guide rails are made entirely of stainless steel.

With a wide base and low-profile design, these carriages and guide rails stabilize moment (twisting) and off-center loads better than other carriages and rails. They're good for use in areas where multiple carriages or rails won't fit.

Run many cycles in tight spaces before replacing or re-greasing carriages.

With fewer moving parts and no need for lubrication, sleeve bearing carriages perform better in dusty and wet environments than ball and roller bearing carriages. They're also better at handling impact and vibration.

Use these carriages and guide rails in temperatures up to 300° F.

Threaded inserts secure the bearing to the carriage and prevent it from loosening due to frequent starts and stops.

Threaded inserts secure the bearing to the carriage and prevent it from loosening due to frequent starts and stops.

A handle on the side of the carriage locks the carriage in place.

A handle locks these carriages in place on curved paths, loops, and circuits in assembly stations and other repetitive processes.

Build loops, circuits, and curved paths in assembly stations and other repetitive processes.

Needle-roller bearings give these track roller carriages higher load capacities than other track roller carriages.

V-shaped rollers and rails allow these carriages to operate well in dirty environments because the debris won't get trapped on the rail.

High-temperature PTFE-thickened grease enables these carriages to operate in temperatures up to 500° F, higher than any other carriage that we offer.

These track roller carriages and guide rails are stainless steel for use in wet, corrosive environments.

Create a self-aligning carriage and guide rail system to compensate for mounting surfaces that aren't parallel.

Nylon rollers and aluminum rails make these good for light duty applications.

A thumb screw locks the slide to prevent movement in systems where vibration is present.

A thumb screw locks the slide to prevent movement in systems where vibration is present.

A micrometer handle ensures accurate, repeatable positioning along a single axis—good for positioning parts, such as measuring and inspecting equipment, that are part of a larger automated system.

A linear scale and micrometer-like hand wheel measure travel distance in increments of 0.001".

With dry-running PTFE sleeve bearings, these rollers don’t require lubricant. They’re also fully submersible, nonsparking, and lightweight.

These threaded track rollers are made of materials that prevent corrosion in wet environments.

Lubricated with graphite, these rollers can handle temperatures from -450° to 750° F—the widest temperature range of any track roller in our offering.

Also known as cam followers, track rollers support loads while guiding and positioning work. Thread the stud directly into a component or secure with a nut for through-hole mounting.

With a double row of cylindrical roller bearings, these rollers provide the highest combination of speed and dynamic radial load ratings of any threaded track roller we offer.

The outer ring is built to handle higher speeds than standard shaft-mount track rollers.

Made of 440C stainless steel, these shaft-mount track rollers resist corrosion in damp environments.

Also known as eccentric track rollers, the shoulder adjusts up or down to align to your track, enabling uniform alignment among rollers in a system.

Thread the stud directly into a component or secure with a nut for through-hole mounting.

Support and guide loads on angle rails in food, pharmaceutical, and other sanitary environments. Also known as yoke-style cam followers, these track rollers offer more mounting flexibility than threaded alternatives and are typically mounted on shafts and clevis rod ends.