McMaster-Carr logo
    Filter by
    Manufacturer Model Number
    Manufacturer
    Color
    Locking Strength
    Begins to Harden
    Breakaway Torque
    Consistency
    Reaches Full Strength
    Removal Method
    Mixing Required
    Cure Type
    Certification
    Military Specifications Met
    Specifications Met
    For Maximum Thread Diameter
    Clarity
    Formulation
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Comments
    E-mail address (if you would like a response)
    5 Products

    Threadlockers

    Image of Product. Front orientation. Threadlockers. Threadlockers, Bottle.

    Bottle

    Image of Product. Front orientation. Threadlockers. Threadlockers, Single-Use Capsule.

    Single-Use

    Capsule

    The most commonly used threadlockers, these liquids prevent loosening due to vibration, bending, or improper torque. You only need a few drops to evenly coat threads. As you twist parts together, exposure to air is blocked and the threadlocker begins to harden.
    Primer (sold separately) cleans the surface and decreases the time to reach full strength. It is recommended when working with aluminum, stainless steel, and titanium; black-oxide finishes; and cadmium and zinc coatings.
    High Locking Strength—Keep fasteners firmly in place in motors, pumps, and other applications subjected to heavy shock and vibration. Breaking the bond of these threadlockers requires a propane torch, heat gun, or induction heater. As a result, they shouldn't be used in setups that you disassemble often.
    Thin Liquid—Seep into tight spaces better than thick liquids, so they're best for fine threads.
    Military Specifications Met—Mil. Spec. threadlockers are manufactured and tested to strict U.S. military standards.
    Container
    Manufacturer
    Model Number
    Size
    Type
    Begins to
    Harden
    Color
    Breakaway
    Torque
    Consistency
    Viscosity
    Military Specifications
    Met
    Temperature
    Range
    For Maximum
    Thread
    Diameter
    Each
    High Locking Strength
     
    Loctite®
    2710.02 fl. oz.Single-Use Capsule10 min.Red250 in·lbfThin Liquid500 cPMIL-S-46163-65° F to 300° F1"91458A880$3.34
    2710.34 fl. oz.Bottle10 min.Red250 in·lbfThin Liquid500 cPMIL-S-46163-65° F to 300° F1"91458A16018.80
    2711.69 fl. oz.Bottle10 min.Red250 in·lbfThin Liquid500 cPMIL-S-46163-65° F to 300° F1"91458A19049.48
    2718.45 fl. oz.Bottle10 min.Red250 in·lbfThin Liquid500 cPMIL-S-46163-65° F to 300° F1"91458A730164.92
    27133.8 fl. oz.Bottle10 min.Red250 in·lbfThin Liquid500 cPMIL-S-46163-65° F to 300° F1"1810A89461.41
     
    back to top